Calcolo della posizione di reti di stazioni permanenti

Con il trascorrere del tempo, le reti di stazioni permanenti GNSS (Global Navigation Satellite System) divengono sempre più un valido supporto alle tecniche di rilevamento satellitare. Esse sono al tempo stesso un’efficace materializzazione del sistema di riferimento e un utile ausilio ad applicazioni di rilevamento topografico e di monitoraggio per il controllo di deformazioni. Alle ormai classiche applicazioni statiche in post-processamento, si affiancano le misure in tempo reale sempre più utilizzate e richieste dall’utenza professionale. In tutti i casi risulta molto importante la determinazione di coordinate precise per le stazioni permanenti, al punto che si è deciso di effettuarla tramite differenti ambienti di calcolo. Sono stati confrontati il Bernese, il Gamit (che condividono l’approccio differenziato) e il Gipsy (che utilizza l’approccio indifferenziato). L’uso di tre software ha reso indispensabile l’individuazione di una strategia di calcolo comune in grado di garantire che, i dati ancillari e i parametri fisici adottati, non costituiscano fonte di diversificazione tra le soluzioni ottenute. L’analisi di reti di dimensioni nazionali oppure di reti locali per lunghi intervalli di tempo, comporta il processamento di migliaia se non decine di migliaia di file; a ciò si aggiunge che, talora a causa di banali errori, oppure al fine di elaborare test scientifici, spesso risulta necessario reiterare le elaborazioni. Molte risorse sono quindi state investite nella messa a punto di procedure automatiche finalizzate, da un lato alla preparazione degli archivi e dall’altro all’analisi dei risultati e al loro confronto qualora si sia in possesso di più soluzioni. Dette procedure sono state sviluppate elaborando i dataset più significativi messi a disposizione del DISTART (Dipartimento di Ingegneria delle Strutture, dei Trasporti, delle Acque, del Rilevamento del Territorio - Università di Bologna). E’ stato così possibile, al tempo stesso, calcolare la posizione delle stazioni permanenti di alcune importanti reti locali e nazionali e confrontare taluni fra i più importanti codici scientifici che assolvono a tale funzione. Per quanto attiene il confronto fra i diversi software si è verificato che: • le soluzioni ottenute dal Bernese e da Gamit (i due software differenziati) sono sempre in perfetto accordo; • le soluzioni Gipsy (che utilizza il metodo indifferenziato) risultano, quasi sempre, leggermente più disperse rispetto a quelle degli altri software e mostrano talvolta delle apprezzabili differenze numeriche rispetto alle altre soluzioni, soprattutto per quanto attiene la coordinata Est; le differenze sono però contenute in pochi millimetri e le rette che descrivono i trend sono comunque praticamente parallele a quelle degli altri due codici; • il citato bias in Est tra Gipsy e le soluzioni differenziate, è più evidente in presenza di determinate combinazioni Antenna/Radome e sembra essere legato all’uso delle calibrazioni assolute da parte dei diversi software. E’ necessario altresì considerare che Gipsy è sensibilmente più veloce dei codici differenziati e soprattutto che, con la procedura indifferenziata, il file di ciascuna stazione di ciascun giorno, viene elaborato indipendentemente dagli altri, con evidente maggior elasticità di gestione: se si individua un errore strumentale su di una singola stazione o se si decide di aggiungere o togliere una stazione dalla rete, non risulta necessario il ricalcolo dell’intera rete. Insieme alle altre reti è stato possibile analizzare la Rete Dinamica Nazionale (RDN), non solo i 28 giorni che hanno dato luogo alla sua prima definizione, bensì anche ulteriori quattro intervalli temporali di 28 giorni, intercalati di sei mesi e che coprono quindi un intervallo temporale complessivo pari a due anni. Si è così potuto verificare che la RDN può essere utilizzata per l’inserimento in ITRF05 (International Terrestrial Reference Frame) di una qualsiasi rete regionale italiana nonostante l’intervallo temporale ancora limitato. Da un lato sono state stimate le velocità ITRF (puramente indicative e non ufficiali) delle stazioni RDN e, dall’altro, è stata effettuata una prova di inquadramento di una rete regionale in ITRF, tramite RDN, e si è verificato che non si hanno differenze apprezzabili rispetto all’inquadramento in ITRF, tramite un congruo numero di stazioni IGS/EUREF (International GNSS Service / European REference Frame, SubCommission for Europe dello International Association of Geodesy).

GNSS interference management techniques against malicious attacks

This thesis collects the outcomes of a Ph.D. course in Telecommunications Engineering and it is focused on the study and design of possible techniques able to counteract interference signal in Global Navigation Satellite System (GNSS) systems. The subject is the jamming threat in navigation systems, that has become a very increasingly important topic in recent years, due to the wide diffusion of GNSS-based civil applications. Detection and mitigation techniques are developed in order to fight out jamming signals, tested in different scenarios and including sophisticated signals. The thesis is organized in two main parts, which deal with management of GNSS intentional counterfeit signals. The first part deals with the interference management, focusing on the intentional interfering signal. In particular, a technique for the detection and localization of the interfering signal level in the GNSS bands in frequency domain has been proposed. In addition, an effective mitigation technique which exploits the periodic characteristics of the common jamming signals reducing interfering effects at the receiver side has been introduced. Moreover, this technique has been also tested in a different and more complicated scenario resulting still effective in mitigation and cancellation of the interfering signal, without high complexity. The second part still deals with the problem of interference management, but regarding with more sophisticated signal. The attention is focused on the detection of spoofing signal, which is the most complex among the jamming signal types. Due to this highly difficulty in detect and mitigate this kind of signal, spoofing threat is considered the most dangerous. In this work, a possible techniques able to detect this sophisticated signal has been proposed, observing and exploiting jointly the outputs of several operational block measurements of the GNSS receiver operating chain.

A consistent combination of GNSS and SLR with minimum constraints

In this article, the realization of a global terrestrial reference system (TRS) based on a consistent combination of Global Navigation Satellite System (GNSS) and Satellite Laser Ranging (SLR) is studied. Our input data consists of normal equation systems from 17 years (1994– 2010) of homogeneously reprocessed GPS, GLONASS and SLR data. This effort used common state of the art reduction models and the same processing software (Bernese GNSS Software) to ensure the highest consistency when combining GNSS and SLR. Residual surface load deformations are modeled with a spherical harmonic approach. The estimated degree-1 surface load coefficients have a strong annual signal for which the GNSS- and SLR-only solutions show very similar results. A combination including these coefficients reduces systematic uncertainties in comparison to the singletechnique solution. In particular, uncertainties due to solar radiation pressure modeling in the coefficient time series can be reduced up to 50 % in the GNSS+SLR solution compared to the GNSS-only solution. In contrast to the ITRF2008 realization, no local ties are used to combine the different geodetic techniques.We combine the pole coordinates as global ties and apply minimum constraints to define the geodetic datum. We show that a common origin, scale and orientation can be reliably realized from our combination strategy in comparison to the ITRF2008.

Study of the fronts of Johnsons and Hurd Glaciers (Livingston Island, Antarctica) from 1957 to 2013, with links to shapefiles

The study of glacier fronts combines different geomatics measurement techniques as the classic survey using total station or theodolite, technical GNSS (Global Navigation Satellite System), using laser-scanner or using photogrammetry (air or ground). The measure by direct methods (classical surveying and GNSS) is useful and fast when accessibility to the glaciers fronts is easy, while it is practically impossible to realize, in the case of glacier fronts that end up in the sea (tide water glaciers). In this paper, a methodology that combines photogrammetric methods and other techniques for lifting the front of the glacier Johnsons, inaccessible is studied. The images obtained from the front, come from a non-metric digital camera; its georeferencing to a global coordinate system is performed by measuring points GNSS support in accessible areas of the glacier front side and applying methods of direct intersection in inaccessible points of the front, taking measurements with theodolite. The result of observations obtained were applied to study the temporal evolution (1957-2014) of the position of the Johnsons glacier front and the position of the Argentina, Las Palmas and Sally Rocks lobes front (Hurd glacier).

Determinación de un modelo de geoide gravimétrico para Puerto Rico como sistema de referencia para las altitudes ortométricas

El geoide, definido como la superficie equipotencial que mejor se ajusta (en el sentido de los mínimos cuadrados) al nivel medio del mar en una determinada época, es la superficie que utilizamos como referencia para determinar las altitudes ortométricas. Si disponemos de una superficie equipotencial de referencia como dátum altimétrico preciso o geoide local, podemos entonces determinar las altitudes ortométricas de forma eficiente a partir de las altitudes elipsoidales proporcionadas por el Sistema Global de Navegación por Satélite (Global Navigation Satellite System, GNSS ). Como es sabido uno de los problemas no resueltos de la geodesia (quizás el más importante de los mismos en la actualidad) es la carencia de un dátum altimétrico global (Sjoberg, 2011) con las precisiones adecuadas. Al no existir un dátum altimétrico global que nos permita obtener los valores absolutos de la ondulación del geoide con la precisión requerida, es necesario emplear modelos geopotenciales como alternativa. Recientemente fue publicado el modelo EGM2008 en el que ha habido una notable mejoría de sus tres fuentes de datos, por lo que este modelo contiene coeficientes adicionales hasta el grado 2190 y orden 2159 y supone una sustancial mejora en la precisión (Pavlis et al., 2008). Cuando en una región determinada se dispone de valores de gravedad y Modelos Digitales del Terreno (MDT) de calidad, es posible obtener modelos de superficies geopotenciales más precisos y de mayor resolución que los modelos globales. Si bien es cierto que el Servicio Nacional Geodésico de los Estados Unidos de América (National Geodetic Survey, NGS) ha estado desarrollando modelos del geoide para la región de los Estados Unidos de América continentales y todos sus territorios desde la década de los noventa, también es cierto que las zonas de Puerto Rico y las Islas Vírgenes Estadounidenses han quedado un poco rezagadas al momento de poder aplicar y obtener resultados de mayor precisión con estos modelos regionales del geoide. En la actualidad, el modelo geopotencial regional vigente para la zona de Puerto Rico y las Islas Vírgenes Estadounidenses es el GEOID12A (Roman y Weston, 2012). Dada la necesidad y ante la incertidumbre de saber cuál sería el comportamiento de un modelo del geoide desarrollado única y exclusivamente con datos de gravedad locales, nos hemos dado a la tarea de desarrollar un modelo de geoide gravimétrico como sistema de referencia para las altitudes ortométricas. Para desarrollar un modelo del geoide gravimétrico en la isla de Puerto Rico, fue necesario implementar una metodología que nos permitiera analizar y validar los datos de gravedad terrestre existentes. Utilizando validación por altimetría con sistemas de información geográfica y validación matemática por colocación con el programa Gravsoft (Tscherning et al., 1994) en su modalidad en Python (Nielsen et al., 2012), fue posible validar 1673 datos de anomalías aire libre de un total de 1894 observaciones obtenidas de la base de datos del Bureau Gravimétrico Internacional (BGI). El aplicar estas metodologías nos permitió obtener una base de datos anomalías de la gravedad fiable la cual puede ser utilizada para una gran cantidad de aplicaciones en ciencia e ingeniería. Ante la poca densidad de datos de gravedad existentes, fue necesario emplear un método alternativo para densificar los valores de anomalías aire libre existentes. Empleando una metodología propuesta por Jekeli et al. (2009b) se procedió a determinar anomalías aire libre a partir de los datos de un MDT. Estas anomalías fueron ajustadas utilizando las anomalías aire libre validadas y tras aplicar un ajuste de mínimos cuadrados por zonas geográficas, fue posible obtener una malla de datos de anomalías aire libre uniforme a partir de un MDT. Tras realizar las correcciones topográficas, determinar el efecto indirecto de la topografía del terreno y la contribución del modelo geopotencial EGM2008, se obtuvo una malla de anomalías residuales. Estas anomalías residuales fueron utilizadas para determinar el geoide gravimétrico utilizando varias técnicas entre las que se encuentran la aproximación plana de la función de Stokes y las modificaciones al núcleo de Stokes, propuestas por Wong y Gore (1969), Vanicek y Kleusberg (1987) y Featherstone et al. (1998). Ya determinados los distintos modelos del geoide gravimétrico, fue necesario validar los mismos y para eso se utilizaron una serie de estaciones permanentes de la red de nivelación del Datum Vertical de Puerto Rico de 2002 (Puerto Rico Vertical Datum 2002, PRVD02 ), las cuales tenían publicados sus valores de altitud elipsoidal y elevación. Ante la ausencia de altitudes ortométricas en las estaciones permanentes de la red de nivelación, se utilizaron las elevaciones obtenidas a partir de nivelación de primer orden para determinar los valores de la ondulación del geoide geométrico (Roman et al., 2013). Tras establecer un total de 990 líneas base, se realizaron dos análisis para determinar la 'precisión' de los modelos del geoide. En el primer análisis, que consistió en analizar las diferencias entre los incrementos de la ondulación del geoide geométrico y los incrementos de la ondulación del geoide de los distintos modelos (modelos gravimétricos, EGM2008 y GEOID12A) en función de las distancias entre las estaciones de validación, se encontró que el modelo con la modificación del núcleo de Stokes propuesta por Wong y Gore presentó la mejor 'precisión' en un 91,1% de los tramos analizados. En un segundo análisis, en el que se consideraron las 990 líneas base, se determinaron las diferencias entre los incrementos de la ondulación del geoide geométrico y los incrementos de la ondulación del geoide de los distintos modelos (modelos gravimétricos, EGM2008 y GEOID12A), encontrando que el modelo que presenta la mayor 'precisión' también era el geoide con la modificación del núcleo de Stokes propuesta por Wong y Gore. En este análisis, el modelo del geoide gravimétrico de Wong y Gore presento una 'precisión' de 0,027 metros en comparación con la 'precisión' del modelo EGM2008 que fue de 0,031 metros mientras que la 'precisión' del modelo regional GEOID12A fue de 0,057 metros. Finalmente podemos decir que la metodología aquí presentada es una adecuada ya que fue posible obtener un modelo del geoide gravimétrico que presenta una mayor 'precisión' que los modelos geopotenciales disponibles, incluso superando la precisión del modelo geopotencial global EGM2008. ABSTRACT The geoid, defined as the equipotential surface that best fits (in the least squares sense) to the mean sea level at a particular time, is the surface used as a reference to determine the orthometric heights. If we have an equipotential reference surface or a precise local geoid, we can then determine the orthometric heights efficiently from the ellipsoidal heights, provided by the Global Navigation Satellite System (GNSS). One of the most common and important an unsolved problem in geodesy is the lack of a global altimetric datum (Sjoberg, 2011)) with the appropriate precision. In the absence of one which allows us to obtain the absolute values of the geoid undulation with the required precision, it is necessary to use alternative geopotential models. The EGM2008 was recently published, in which there has been a marked improvement of its three data sources, so this model contains additional coefficients of degree up to 2190 and order 2159, and there is a substantial improvement in accuracy (Pavlis et al., 2008). When a given region has gravity values and high quality digital terrain models (DTM), it is possible to obtain more accurate regional geopotential models, with a higher resolution and precision, than global geopotential models. It is true that the National Geodetic Survey of the United States of America (NGS) has been developing geoid models for the region of the continental United States of America and its territories from the nineties, but which is also true is that areas such as Puerto Rico and the U.S. Virgin Islands have lagged behind when to apply and get more accurate results with these regional geopotential models. Right now, the available geopotential model for Puerto Rico and the U.S. Virgin Islands is the GEOID12A (Roman y Weston, 2012). Given this need and given the uncertainty of knowing the behavior of a regional geoid model developed exclusively with data from local gravity, we have taken on the task of developing a gravimetric geoid model to use as a reference system for orthometric heights. To develop a gravimetric geoid model in the island of Puerto Rico, implementing a methodology that allows us to analyze and validate the existing terrestrial gravity data is a must. Using altimetry validation with GIS and mathematical validation by collocation with the Gravsoft suite programs (Tscherning et al., 1994) in its Python version (Nielsen et al., 2012), it was possible to validate 1673 observations with gravity anomalies values out of a total of 1894 observations obtained from the International Bureau Gravimetric (BGI ) database. Applying these methodologies allowed us to obtain a database of reliable gravity anomalies, which can be used for many applications in science and engineering. Given the low density of existing gravity data, it was necessary to employ an alternative method for densifying the existing gravity anomalies set. Employing the methodology proposed by Jekeli et al. (2009b) we proceeded to determine gravity anomaly data from a DTM. These anomalies were adjusted by using the validated free-air gravity anomalies and, after that, applying the best fit in the least-square sense by geographical area, it was possible to obtain a uniform grid of free-air anomalies obtained from a DTM. After applying the topographic corrections, determining the indirect effect of topography and the contribution of the global geopotential model EGM2008, a grid of residual anomalies was obtained. These residual anomalies were used to determine the gravimetric geoid by using various techniques, among which are the planar approximation of the Stokes function and the modifications of the Stokes kernel, proposed by Wong y Gore (1969), Vanicek y Kleusberg (1987) and Featherstone et al. (1998). After determining the different gravimetric geoid models, it was necessary to validate them by using a series of stations of the Puerto Rico Vertical Datum of 2002 (PRVD02) leveling network. These stations had published its values of ellipsoidal height and elevation, and in the absence of orthometric heights, we use the elevations obtained from first - order leveling to determine the geometric geoid undulation (Roman et al., 2013). After determine a total of 990 baselines, two analyzes were performed to determine the ' accuracy ' of the geoid models. The first analysis was to analyze the differences between the increments of the geometric geoid undulation with the increments of the geoid undulation of the different geoid models (gravimetric models, EGM2008 and GEOID12A) in function of the distance between the validation stations. Through this analysis, it was determined that the model with the modified Stokes kernel given by Wong and Gore had the best 'accuracy' in 91,1% for the analyzed baselines. In the second analysis, in which we considered the 990 baselines, we analyze the differences between the increments of the geometric geoid undulation with the increments of the geoid undulation of the different geoid models (gravimetric models, EGM2008 and GEOID12A) finding that the model with the highest 'accuracy' was also the model with modifying Stokes kernel given by Wong and Gore. In this analysis, the Wong and Gore gravimetric geoid model presented an 'accuracy' of 0,027 meters in comparison with the 'accuracy' of global geopotential model EGM2008, which gave us an 'accuracy' of 0,031 meters, while the 'accuracy ' of the GEOID12A regional model was 0,057 meters. Finally we can say that the methodology presented here is adequate as it was possible to obtain a gravimetric geoid model that has a greater 'accuracy' than the geopotential models available, even surpassing the accuracy of global geopotential model EGM2008.

Characterization of Cavities Using the GPR, LIDAR and GNSS Techniques

The study of the many types of natural and manmade cavities in different parts of the world is important to the fields of geology, geophysics, engineering, architectures, agriculture, heritages and landscape. Ground-penetrating radar (GPR) is a noninvasive geodetection and geolocation technique suitable for accurately determining buried structures. This technique requires knowing the propagation velocity of electromagnetic waves (EM velocity) in the medium. We propose a method for calibrating the EM velocity using the integration of laser imaging detection and ranging (LIDAR) and GPR techniques using the Global Navigation Satellite System (GNSS) as support for geolocation. Once the EM velocity is known and the GPR profiles have been properly processed and migrated, they will also show the hidden cavities and the old hidden structures from the cellar. In this article, we present a complete study of the joint use of the GPR, LIDAR and GNSS techniques in the characterization of cavities. We apply this methodology to study underground cavities in a group of wine cellars located in Atauta (Soria, Spain). The results serve to identify construction elements that form the cavity and group of cavities or cellars. The described methodology could be applied to other shallow underground structures with surface connection, where LIDAR and GPR profiles could be joined, as, for example, in archaeological cavities, sewerage systems, drainpipes, etc.

Técnica de localização em ambientes fechados utilizando padrões de redes sem fio.

Localizar objetos ou pessoas no interior de um edifício é de grande interesse. Contudo, diferentemente do que ocorre no exterior de edificações, não há metodologia consagrada para a determinação da posição desses entes nos edifícios. Para o posicionamento em locais abertos existem tecnologias consolidadas, como GNSS (Global Navigation Satellite System), a dificuldade em fazê-lo em interiores é maior. Nesses casos, o GNSS não pode ser utilizado, pois os sinais de rádio dos satélites não conseguem penetrar através das estruturas, enquanto que outras tecnologias são apenas incipientes nesse quesito. Abordagens habituais para a resolução dessa demanda têm se baseado na utilização de propagadores das ondas de rádio do GNSS, no uso da potência de sinais de redes sem fio ou, ainda, no emprego de transmissores infravermelhos. No entanto, uma técnica diferente pode ser empreendida para essa finalidade. Usando-se a assinatura das potências de rádio das redes sem fio nas imediações e no interior da edificação, é possível criar um mapa com base nesses sinais, permitindo a determinação da posição de um objeto. No presente trabalho foram desenvolvidos um sistema para geração do mapa de sinais, com critério de parada e um método de cálculo de posicionamento. Procedeu-se, também, à análise de quatro critérios para o cálculo final da posição do objeto, baseados no uso da distância euclidiana com os conjuntos de roteadores disponíveis. Concluiu-se que, quando o mapa de sinais é pequeno, o posicionamento fracassou. Entretanto, quando a quantidade de sinais geradores do mapa aumenta, os resultados apresentaram melhora significativa, com resultados próximos a 100% de assertividade. Desse modo foi possível determinar uma estimativa boa para o número mínimo de roteadores presentes na base e estabelecer um critério de parada para a fase de criação do mapa de sinais.

Designing a Remote Navigation System

This project involves the design and implementation of a global electronic tracking system intended for use by trans-oceanic vessels, using the technology of the U.S. Government's Global Positioning System (GPS) and a wireless connection to a networked computer. Traditional navigation skills are being replaced with highly accurate electronics. GPS receivers, computers, and mobile communication are becoming common among both recreational and commercial boaters. With computers and advanced communication available throughout the maritime world, information can be shared instantaneously around the globe. This ability to monitor one's whereabouts from afar can provide an increased level of safety and efficiency. Current navigation software seldom includes the capability of providing upto-the-minute navigation information for remote display. Remote access to this data will allow boat owners to track the progress of their boats, land-based organizations to monitor weather patterns and suggest course changes, and school groups to track the progress of a vessel and learn about navigation and science. The software developed in this project allows navigation information from a vessel to be remotely transmitted to a land-based server, for interpretation and deployment to remote users over the Internet. This differs from current software in that it allows the tracking of one vessel by multiple users and provides a means for two-way text messaging between users and the vesseI. Beyond the coastal coverage provided by cellular telephones, mobile communication is advancing rapidly. Current tools such as satellite telephones and single-sideband radio enable worldwide communications, including the ability to connect to the Internet. If current trends continue, portable global communication will be available at a reasonable price and Internet connections on boats will become more common.

First results from an airborne GPS radio occultation system for atmospheric profiling

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Synchronization and Detection Techniques for Navigation and Communication Systems

Synchronization is a key issue in any communication system, but it becomes fundamental in the navigation systems, which are entirely based on the estimation of the time delay of the signals coming from the satellites. Thus, even if synchronization has been a well known topic for many years, the introduction of new modulations and new physical layer techniques in the modern standards makes the traditional synchronization strategies completely ineffective. For this reason, the design of advanced and innovative techniques for synchronization in modern communication systems, like DVB-SH, DVB-T2, DVB-RCS, WiMAX, LTE, and in the modern navigation system, like Galileo, has been the topic of the activity. Recent years have seen the consolidation of two different trends: the introduction of Orthogonal Frequency Division Multiplexing (OFDM) in the communication systems, and of the Binary Offset Carrier (BOC) modulation in the modern Global Navigation Satellite Systems (GNSS). Thus, a particular attention has been given to the investigation of the synchronization algorithms in these areas.

Hybrid robot control and SLAM for persistent navigation and mapping

For a mobile robot to operate autonomously in real-world environments, it must have an effective control system and a navigation system capable of providing robust localization, path planning and path execution. In this paper we describe the work investigating synergies between mapping and control systems. We have integrated development of a control system for navigating mobile robots and a robot SLAM system. The control system is hybrid in nature and tightly coupled with the SLAM system; it uses a combination of high and low level deliberative and reactive control processes to perform obstacle avoidance, exploration, global navigation and recharging, and draws upon the map learning and localization capabilities of the SLAM system. The effectiveness of this hybrid, multi-level approach was evaluated in the context of a delivery robot scenario. Over a period of two weeks the robot performed 1143 delivery tasks to 11 different locations with only one delivery failure (from which it recovered), travelled a total distance of more than 40km, and recharged autonomously a total of 23 times. In this paper we describe the combined control and SLAM system and discuss insights gained from its successful application in a real-world context.

A simulation study of unified GPS and roadside ranging technologies for vehicle positioning

The future vehicle navigation for safety applications requires seamless positioning at the accuracy of sub-meter or better. However, standalone Global Positioning System (GPS) or Differential GPS (DGPS) suffer from solution outages while being used in restricted areas such as high-rise urban areas and tunnels due to the blockages of satellite signals. Smoothed DGPS can provide sub-meter positioning accuracy, but not the seamless requirement. A disadvantage of the traditional navigation aids such as Dead Reckoning and Inertial Measurement Unit onboard vehicles are either not accurate enough due to error accumulation or too expensive to be acceptable by the mass market vehicle users. One of the alternative technologies is to use the wireless infrastructure installed in roadside to locate vehicles in regions where the Global Navigation Satellite Systems (GNSS) signals are not available (for example: inside tunnels, urban canyons and large indoor car parks). The examples of roadside infrastructure which can be potentially used for positioning purposes could include Wireless Local Area Network (WLAN)/Wireless Personal Area Network (WPAN) based positioning systems, Ultra-wide band (UWB) based positioning systems, Dedicated Short Range Communication (DSRC) devices, Locata’s positioning technology, and accurate road surface height information over selected road segments such as tunnels. This research reviews and compares the possible wireless technologies that could possibly be installed along roadside for positioning purposes. Models and algorithms of integrating different positioning technologies are also presented. Various simulation schemes are designed to examine the performance benefits of united GNSS and roadside infrastructure for vehicle positioning. The results from these experimental studies have shown a number of useful findings. It is clear that in the open road environment where sufficient satellite signals can be obtained, the roadside wireless measurements contribute very little to the improvement of positioning accuracy at the sub-meter level, especially in the dual constellation cases. In the restricted outdoor environments where only a few GPS satellites, such as those with 45 elevations, can be received, the roadside distance measurements can help improve both positioning accuracy and availability to the sub-meter level. When the vehicle is travelling in tunnels with known heights of tunnel surfaces and roadside distance measurements, the sub-meter horizontal positioning accuracy is also achievable. Overall, simulation results have demonstrated that roadside infrastructure indeed has the potential to provide sub-meter vehicle position solutions for certain road safety applications if the properly deployed roadside measurements are obtainable.

Experimental studies of wireless communication and GNSS kinematic positioning performance in high-mobility vehicle environments

In order to support intelligent transportation system (ITS) road safety applications such as collision avoidance, lane departure warnings and lane keeping, Global Navigation Satellite Systems (GNSS) based vehicle positioning system has to provide lane-level (0.5 to 1 m) or even in-lane-level (0.1 to 0.3 m) accurate and reliable positioning information to vehicle users. However, current vehicle navigation systems equipped with a single frequency GPS receiver can only provide road-level accuracy at 5-10 meters. The positioning accuracy can be improved to sub-meter or higher with the augmented GNSS techniques such as Real Time Kinematic (RTK) and Precise Point Positioning (PPP) which have been traditionally used in land surveying and or in slowly moving environment. In these techniques, GNSS corrections data generated from a local or regional or global network of GNSS ground stations are broadcast to the users via various communication data links, mostly 3G cellular networks and communication satellites. This research aimed to investigate the precise positioning system performances when operating in the high mobility environments. This involves evaluation of the performances of both RTK and PPP techniques using: i) the state-of-art dual frequency GPS receiver; and ii) low-cost single frequency GNSS receiver. Additionally, this research evaluates the effectiveness of several operational strategies in reducing the load on data communication networks due to correction data transmission, which may be problematic for the future wide-area ITS services deployment. These strategies include the use of different data transmission protocols, different correction data format standards, and correction data transmission at the less-frequent interval. A series of field experiments were designed and conducted for each research task. Firstly, the performances of RTK and PPP techniques were evaluated in both static and kinematic (highway with speed exceed 80km) experiments. RTK solutions achieved the RMS precision of 0.09 to 0.2 meter accuracy in static and 0.2 to 0.3 meter in kinematic tests, while PPP reported 0.5 to 1.5 meters in static and 1 to 1.8 meter in kinematic tests by using the RTKlib software. These RMS precision values could be further improved if the better RTK and PPP algorithms are adopted. The tests results also showed that RTK may be more suitable in the lane-level accuracy vehicle positioning. The professional grade (dual frequency) and mass-market grade (single frequency) GNSS receivers were tested for their performance using RTK in static and kinematic modes. The analysis has shown that mass-market grade receivers provide the good solution continuity, although the overall positioning accuracy is worse than the professional grade receivers. In an attempt to reduce the load on data communication network, we firstly evaluate the use of different correction data format standards, namely RTCM version 2.x and RTCM version 3.0 format. A 24 hours transmission test was conducted to compare the network throughput. The results have shown that 66% of network throughput reduction can be achieved by using the newer RTCM version 3.0, comparing to the older RTCM version 2.x format. Secondly, experiments were conducted to examine the use of two data transmission protocols, TCP and UDP, for correction data transmission through the Telstra 3G cellular network. The performance of each transmission method was analysed in terms of packet transmission latency, packet dropout, packet throughput, packet retransmission rate etc. The overall network throughput and latency of UDP data transmission are 76.5% and 83.6% of TCP data transmission, while the overall accuracy of positioning solutions remains in the same level. Additionally, due to the nature of UDP transmission, it is also found that 0.17% of UDP packets were lost during the kinematic tests, but this loss doesn't lead to significant reduction of the quality of positioning results. The experimental results from the static and the kinematic field tests have also shown that the mobile network communication may be blocked for a couple of seconds, but the positioning solutions can be kept at the required accuracy level by setting of the Age of Differential. Finally, we investigate the effects of using less-frequent correction data (transmitted at 1, 5, 10, 15, 20, 30 and 60 seconds interval) on the precise positioning system. As the time interval increasing, the percentage of ambiguity fixed solutions gradually decreases, while the positioning error increases from 0.1 to 0.5 meter. The results showed the position accuracy could still be kept at the in-lane-level (0.1 to 0.3 m) when using up to 20 seconds interval correction data transmission.

The SmartVision navigation prototype for the blind

The goal of the project "SmartVision: active vision for the blind" is to develop a small and portable but intelligent and reliable system for assisting the blind and visually impaired while navigating autonomously, both outdoor and indoor. In this paper we present an overview of the prototype, design issues, and its different modules which integrate a GIS with GPS, Wi-Fi, RFID tags and computer vision. The prototype addresses global navigation by following known landmarks, local navigation with path tracking and obstacle avoidance, and object recognition. The system does not replace the white cane, but extends it beyond its reach. The user-friendly interface consists of a 4-button hand-held box, a vibration actuator in the handle of the cane, and speech synthesis. A future version may also employ active RFID tags for marking navigation landmarks, and speech recognition may complement speech synthesis.

The smart vision local navigation aid for blind and visually impaired persons

The SmartVision prototype is a small, cheap and easily wearable navigation aid for blind and visually impaired persons. Its functionality addresses global navigation for guiding the user to some destiny, and local navigation for negotiating paths, sidewalks and corridors, with avoidance of static as well as moving obstacles. Local navigation applies to both in- and outdoor situations. In this article we focus on local navigation: the detection of path borders and obstacles in front of the user and just beyond the reach of the white cane, such that the user can be assisted in centering on the path and alerted to looming hazards. Using a stereo camera worn at chest height, a portable computer in a shoulder-strapped pouch or pocket and only one earphone or small speaker, the system is inconspicuous, it is no hindrence while walking with the cane, and it does not block normal surround sounds. The vision algorithms are optimised such that the system can work at a few frames per second.