Factorizations of the complete graph into C-5-factors and 1-factors

In this paper, we show that K-10n can be factored into alpha C-5-factors and beta 1-factors for all non-negative integers alpha and beta satisfying 2alpha + beta = 10(n) - 1.

Is maximizing resilience compatible with established ecological goal functions?

Cropp and Gabric [Ecosystem adaptation: do ecosystems maximise resilience? Ecology. In press] used a simple phytoplanktonzooplankton-nutrient model and a genetic algorithm to determine the parameter values that would maximize the value of certain goal functions. These goal functions were to maximize biomass, maximize flux, maximize flux to biomass ratio, and maximize resilience. It was found that maximizing goal functions maximized resilience. The objective of this study was to investigate whether the Cropp and Gabric [Ecosystem adaptation: do ecosystems maximise resilience? Ecology. In press] result was indicative of a general ecosystem principle, or peculiar to the model and parameter ranges used. This study successfully replicated the Cropp and Gabric [Ecosystem adaptation: do ecosystems maximise resilience? Ecology. In press] experiment for a number of different model types, however, a different interpretation of the results is made. A new metric, concordance, was devised to describe the agreement between goal functions. It was found that resilience has the highest concordance of all goal functions trialled. for most model types. This implies that resilience offers a compromise between the established ecological goal functions. The parameter value range used is found to affect the parameter versus goal function relationships. Local maxima and minima affected the relationship between parameters and goal functions, and between goal functions. (C) 2003 Elsevier B.V. All rights reserved.

Unsaturated diffusivity functions for concrete derived from NMR images

Deterioration of concrete or reinforcing steel through excessive contaminant concentration is often the result of repeated wetting and drying cycles. At each cycle, the absorption of water carries new contaminants into the unsaturated concrete. Nuclear Magnetic Resonance (NMR) is used with large concrete samples to observe the shape of the wetting profile during a simple one-dimensional wetting process. The absorption of water by dry concrete is modelled by a nonlinear diffusion equation with the unsaturated hydraulic diffusivity being a strongly nonlinear function of the moisture content. Exponential and power functions are used for the hydraulic diffusivity and corresponding solutions of the diffusion equation adequately predict the shape of the experimental wetting profile. The shape parameters, describing the wetting profile, vary little between different blends and are relatively insensitive to subsequent re-wetting experiments allowing universal parameters to be suggested for these concretes.

O ensino e aprendizagem do gráfico da função quadrática com e sem auxílio do Software Winplot

RESUMO: A utilização adequada das TIC no ensino da Matemática, nos dias de hoje é considerada por alguns como justificada e inevitável, esperando que a sua utilização melhore o ensino e a aprendizagem da Matemática. Nesta investigação, pretende-se testar o Software Winplot), no ensino e aprendizagem do gráfico da função quadrática com alunos do 10ºano, da Escola do segundo ciclo do Ensino Secundário nº9099, de modo a verificar se melhora o ensino e na aprendizagem desta temática.Para a nossa investigação Seleccionámos dois grupos de alunos do 10º ano que funcionaram como grupo de controlo e grupo experimental; depois de ambos os grupos terem realizado dois pré-testes, o grupo experimental realizou as aprendizagens no laboratório de informática com auxílio do Software Winplot, ao longo de 8 semanas, durante o 2º trimestre do ano lectivo de 2009/2010. O grupo de controlo realizou as aprendizagens, ao mesmo tempo que o grupo experimental, na sala normal de aulas sem auxílio do Software Winplot.Ao compararmos os dois grupos, o teste T de pares para amostras independentes, mostra-nos que estatisticamente não há diferenças significativas entre os dois grupos, porque os níveis de significância são maiores que p=0,05, desta feita podemos dizer que o grupo experimental, não obteve melhores resultados que o grupo de controlo, logo o Software Winplot não resultou o efeito desejado nas aprendizagens com alunos da 10ºano da Escola do segundo ciclo do ensino Secundário nº9099, sita no município de Viana (Luanda/Angola). ABSTRACT:The appropriate use of ICTs in teaching mathematics, today is considered by somo to be justified and inevitable, hoping that their use will improve the teaching and learning of mathematics.In this investigation, we intend to test the Software Winplot, teaching and learning of the graph of quadratic functions with students of grade 10, attending the second cycle of secondary School nº9099 in order to verify that improves teaching and learning of this subject.For our research selected two groups of students in 10th grade who acted as the controlo group and experimental group, after both group had undergone two pre-test, the experimental group performed the learning in the computer lab with the aid of Software Winplot, over 8 weeks during the second quarter of the academic year 2009/2010. Thr control gropu performed the learning, while the experimental group, in rregular class room without help of the Software Winplot.Comparing the two groups, the t test for independent samples pairs, shows us that there is no statistically significant differences between the two groups, because the significance levels are greater than p=0,05, this time we can say that experimental group, not yielded better results than the control group, so the Software did not result the desired effect on the learning with students from 10th grade of the School of the second cycle of Secondary nº9099, located in Viana (Luanda/Angola).

Health education: the role and functions of the specialist and the generalist

Education for health is a process in which all public health and medical care personnel are involved. People learn both formally (planned learning experiences) and informally (unplanned learning experiences). Since the patient, the client, the consummer and the community expect public health and medical care personnel to assist them with health and disease issues and problems, the response of the professional "educates" the customer whether the professional intends to educate or not. Therefore, it is incumbent on all public health and medical care professionals to understand their educational functions and their role in health education. It is also important that the role of the specialist in education be clear. The specialist, as to all other specialists, has an in-depth knowledge of his area of expertise, i.e., the teaching/learning process; s/he may function as a consultant to others to enhance the educational potential of their role or s/he may work with a team or with communities or groups of patients. Specific competencies and knowledge are required of the health education specialist; and there is a body of learning and social change theory which provides a frame of reference for planning, implementing and evaluating educational programs. Working with others to enhance their potential to learn and to make informed decisions about health/disease issues is the hallmark of the health education specialist.

Equilibrium self-assembly of colloids with distinct interaction sites: Thermodynamics, percolation, and cluster distribution functions

We calculate the equilibrium thermodynamic properties, percolation threshold, and cluster distribution functions for a model of associating colloids, which consists of hard spherical particles having on their surfaces three short-ranged attractive sites (sticky spots) of two different types, A and B. The thermodynamic properties are calculated using Wertheim's perturbation theory of associating fluids. This also allows us to find the onset of self-assembly, which can be quantified by the maxima of the specific heat at constant volume. The percolation threshold is derived, under the no-loop assumption, for the correlated bond model: In all cases it is two percolated phases that become identical at a critical point, when one exists. Finally, the cluster size distributions are calculated by mapping the model onto an effective model, characterized by a-state-dependent-functionality (f) over bar and unique bonding probability (p) over bar. The mapping is based on the asymptotic limit of the cluster distributions functions of the generic model and the effective parameters are defined through the requirement that the equilibrium cluster distributions of the true and effective models have the same number-averaged and weight-averaged sizes at all densities and temperatures. We also study the model numerically in the case where BB interactions are missing. In this limit, AB bonds either provide branching between A-chains (Y-junctions) if epsilon(AB)/epsilon(AA) is small, or drive the formation of a hyperbranched polymer if epsilon(AB)/epsilon(AA) is large. We find that the theoretical predictions describe quite accurately the numerical data, especially in the region where Y-junctions are present. There is fairly good agreement between theoretical and numerical results both for the thermodynamic (number of bonds and phase coexistence) and the connectivity properties of the model (cluster size distributions and percolation locus).

On differentiability and analyticity of positive definite functions

We derive a set of differential inequalities for positive definite functions based on previous results derived for positive definite kernels by purely algebraic methods. Our main results show that the global behavior of a smooth positive definite function is, to a large extent, determined solely by the sequence of even-order derivatives at the origin: if a single one of these vanishes then the function is constant; if they are all non-zero and satisfy a natural growth condition, the function is real-analytic and consequently extends holomorphically to a maximal horizontal strip of the complex plane.

Stratification of the earth beneath the Azores from P and S receiver functions

Seismic recordings of IRIS/IDA/GSN station CMLA and of several temporary stations in the Azores archipelago are processed with P and S receiver function (PRF and SRF) techniques. Contrary to regional seismic tomography these methods provide estimates of the absolute velocities and of the Vp/Vs ratio up to a depth of similar to 300 km. Joint inversion of PRFs and SRFs for a few data sets consistently reveals a division of the subsurface medium into four zones with a distinctly different Vp/Vs ratio: the crust similar to 20 km thick with a ratio of similar to 1.9 in the lower crust, the high-Vs mantle lid with a strongly reduced VpNs velocity ratio relative to the standard 1.8, the low-velocity zone (LVZ) with a velocity ratio of similar to 2.0, and the underlying upper-mantle layer with a standard velocity ratio. Our estimates of crustal thickness greatly exceed previous estimates (similar to 10 km). The base of the high-Vs lid (the Gutenberg discontinuity) is at a depth of-SO km. The LVZ with a reduction of S velocity of similar to 15% relative to the standard (IASP91) model is terminated at a depth of similar to 200 km. The average thickness of the mantle transition zone (TZ) is evaluated from the time difference between the S410p and SKS660p, seismic phases that are robustly detected in the S and SKS receiver functions. This thickness is practically similar to the standard IASP91 value of 250 km. and is characteristic of a large region of the North Atlantic outside the Azores plateau. Our data are indicative of a reduction of the S-wave velocity of several percent relative to the standard velocity in a depth interval from 460 to 500 km. This reduction is found in the nearest vicinities of the Azores, in the region sampled by the PRFs, but, as evidenced by SRFs, it is missing at a distance of a few hundred kilometers from the islands. We speculate that this anomaly may correspond to the source of a plume which generated the Azores hotspot. Previously, a low S velocity in this depth range was found with SRF techniques beneath a few other hotspots.

GA topology optimization using random keys for tree encoding of structures

Topology optimization consists in finding the spatial distribution of a given total volume of material for the resulting structure to have some optimal property, for instance, maximization of structural stiffness or maximization of the fundamental eigenfrequency. In this paper a Genetic Algorithm (GA) employing a representation method based on trees is developed to generate initial feasible individuals that remain feasible upon crossover and mutation and as such do not require any repairing operator to ensure feasibility. Several application examples are studied involving the topology optimization of structures where the objective functions is the maximization of the stiffness and the maximization of the first and the second eigenfrequencies of a plate, all cases having a prescribed material volume constraint.

Augmented LDPC Graph for Distributed Video Coding with Multiple Side Information

The advances made in channel-capacity codes, such as turbo codes and low-density parity-check (LDPC) codes, have played a major role in the emerging distributed source coding paradigm. LDPC codes can be easily adapted to new source coding strategies due to their natural representation as bipartite graphs and the use of quasi-optimal decoding algorithms, such as belief propagation. This paper tackles a relevant scenario in distributedvideo coding: lossy source coding when multiple side information (SI) hypotheses are available at the decoder, each one correlated with the source according to different correlation noise channels. Thus, it is proposed to exploit multiple SI hypotheses through an efficient joint decoding technique withmultiple LDPC syndrome decoders that exchange information to obtain coding efficiency improvements. At the decoder side, the multiple SI hypotheses are created with motion compensated frame interpolation and fused together in a novel iterative LDPC based Slepian-Wolf decoding algorithm. With the creation of multiple SI hypotheses and the proposed decoding algorithm, bitrate savings up to 8.0% are obtained for similar decoded quality.

Optoelectronic Logic Functions Based on Reconfigurable SiC Multilayer Devices

WDM multilayered SiC/Si devices based on a-Si:H and a-SiC:H filter design are approached from a reconfigurable point of view. Results show that the devices, under appropriated optical bias, act as reconfigurable active filters that allow optical switching and optoelectronic logic functions development. Under front violet irradiation the magnitude of the red and green channels are amplified and the blue and violet reduced. Violet back irradiation cuts the red channel, slightly influences the magnitude of the green and blue ones and strongly amplifies de violet channel. This nonlinearity provides the possibility for selective removal of useless wavelengths. Particular attention is given to the amplification coefficient weights, which allow taking into account the wavelength background effects when a band needs to be filtered from a wider range of mixed signals, or when optical active filter gates are used to select and filter input signals to specific output ports in WDM communication systems. A truth table of an encoder that performs 8-to-1 multiplexer (MUX) function is presented.