The use of ensemble empirical mode decomposition with canonical correlation analysis as a novel artifact removal technique

Biosignal measurement and processing is increasingly being deployed in ambulatory situations particularly in connected health applications. Such an environment dramatically increases the likelihood of artifacts which can occlude features of interest and reduce the quality of information available in the signal. If multichannel recordings are available for a given signal source, then there are currently a considerable range of methods which can suppress or in some cases remove the distorting effect of such artifacts. There are, however, considerably fewer techniques available if only a single-channel measurement is available and yet single-channel measurements are important where minimal instrumentation complexity is required. This paper describes a novel artifact removal technique for use in such a context. The technique known as ensemble empirical mode decomposition with canonical correlation analysis (EEMD-CCA) is capable of operating on single-channel measurements. The EEMD technique is first used to decompose the single-channel signal into a multidimensional signal. The CCA technique is then employed to isolate the artifact components from the underlying signal using second-order statistics. The new technique is tested against the currently available wavelet denoising and EEMD-ICA techniques using both electroencephalography and functional near-infrared spectroscopy data and is shown to produce significantly improved results. © 1964-2012 IEEE.

Evolution of Antimicrobial Peptides to Self-Assembled Peptides for Biomaterial Applications

Biomaterial-related infections are a persistent burden on patient health, recovery, mortality and healthcare budgets. Self-assembled antimicrobial peptides have evolved from the area of antimicrobial peptides. Peptides serve as important weapons in nature, and increasingly medicine, for combating microbial infection and biofilms. Self-assembled peptides harness a “bottom-up” approach, whereby the primary peptide sequence may be modified with natural and unnatural amino acids to produce an inherently antimicrobial hydrogel. Gelation may be tailored to occur in the presence of physiological and infective indicators (e.g. pH, enzymes) and therefore allow local, targeted antimicrobial therapy at the site of infection. Peptides demonstrate inherent biocompatibility, antimicrobial activity, biodegradability and numerous functional groups. They are therefore prime candidates for the production of polymeric molecules that have the potential to be conjugated to biomaterials with precision. Non-native chemistries and functional groups are easily incorporated into the peptide backbone allowing peptide hydrogels to be tailored to specific functional requirements. This article reviews an area of increasing interest, namely self-assembled peptides and their potential therapeutic applications as innovative hydrogels and biomaterials in the prevention of biofilm-related infection.

Anti-biofilm activity of ultrashort cinnamic acid peptide derivatives against medical device-related pathogens

The threat of antimicrobial resistance has placed increasing emphasis on the development of innovative approaches to eradicate multidrug-resistant pathogens. Biofilm-forming microorganisms, for example, Staphylococcus epidermidis and Staphylococcus aureus, are responsible for increased incidence of biomaterial infection, extended hospital stays and patient morbidity and mortality. This paper highlights the potential of ultrashort tetra-peptide conjugated to hydrophobic cinnamic acid derivatives. These peptidomimetic molecules demonstrate selective and highly potent activity against resistant biofilm forms of Gram-positive medical device-related pathogens. 3-(4-Hydroxyphenyl)propionic)-Orn-Orn-Trp-Trp-NH2 displays particular promise with minimum biofilm eradication concentration (MBEC) values of 125 µg/ml against methicillin sensitive (ATCC 29213) and resistant (ATCC 43300) S. aureus and activity shown against biofilm forms of Escherichia coli (MBEC: 1000 µg/ml). Kill kinetics confirms complete eradication of established 24-h biofilms at MBEC with 6-h exposure. Reduced cell cytotoxicity, relative to Gram-positive pathogens, was proven via tissue culture (HaCaT) and haemolysis assays (equine erythrocytes).

Existing in nature as part of the immune response, antimicrobial peptides display great promise for exploitation by the pharmaceutical industry in order to increase the library of available therapeutic molecules. Ultrashort variants are particularly promising for translation as clinical therapeutics as they are more cost-effective, easier to synthesise and can be tailored to specific functional requirements based on the primary sequence allowing factors such as spectrum of activity to be varied.

Quando as crianças contam histórias: estudo para o desenvolvimento de uma aplicação multimédia interativa de suporte ao conto de histórias por crianças do 1º CEB

Concetualmente ancorado em referenciais teóricos que demonstram o papel fundamental da narrativa e a ubiquidade dos produtos dos esquemas narrativos nos vários domínios da vida humana, bem como a importância do desenvolvimento de competências narrativas adequadas enquanto processo determinante no sentido da construção da literacia, este trabalho procurou compreender os processos de estruturação e a estrutura de histórias contadas por crianças do 1º Ciclo do Ensino Básico (CEB), numa abordagem morfológica suportada pela teoria e modelo de Vladimir Propp, no sentido da concetualização e prototipagem de uma aplicação multimédia de suporte ao conto de histórias. Os estudos empíricos conduzidos, de natureza comparativo-exploratória, permitiram que as crianças assumissem o papel de contadoras de histórias e informantes, fornecendo-nos o corpus e conteúdo para análises morfológicas e de conteúdo, sobretudo qualitativas e com objetivos fundamentalmente descritivos. Os resultados do estudo suportaram o delineamento de linhas orientadoras para o desenvolvimento do modelo concetual e requisitos funcionais de uma aplicação multimédia de suporte ao conto de histórias, de natureza educativa, que veio a designar-se por Curucucu©, Conto eu ou contas tu?. O processo de prototipagem da aplicação multimédia implementou uma abordagem iterativa e centrada no aluno para efeitos de concetualização, desenho, implementação e testes da ferramenta e tendo como preocupação central o desenvolvimento de interfaces adequadas, quer às crianças, quer aos objetivos e contextos de utilização, integrando crianças e professores do 1.º CEB, bem como outros informantes (na qualidade de peritos) em fases específicas do processo. Para além das limitações encontradas no estudo, avançam-se propostas de investigação futura.

EMMON: a WSN system architecture for large scale and dense real-time embedded monitoring

Wireless sensor networks (WSNs) have attracted growing interest in the last decade as an infrastructure to support a diversity of ubiquitous computing and cyber-physical systems. However, most research work has focused on protocols or on specific applications. As a result, there remains a clear lack of effective, feasible and usable system architectures that address both functional and non-functional requirements in an integrated fashion. In this paper, we outline the EMMON system architecture for large-scale, dense, real-time embedded monitoring. EMMON provides a hierarchical communication architecture together with integrated middleware and command and control software. It has been designed to use standard commercially-available technologies, while maintaining as much flexibility as possible to meet specific applications requirements. The EMMON architecture has been validated through extensive simulation and experimental evaluation, including a 300+ node test-bed, which is, to the best of our knowledge, the largest single-site WSN test-bed in Europe to date.

Reliability and availability in reconfigurable computing: a basis for a common solution

Dynamically reconfigurable SRAM-based field-programmable gate arrays (FPGAs) enable the implementation of reconfigurable computing systems where several applications may be run simultaneously, sharing the available resources according to their own immediate functional requirements. To exclude malfunctioning due to faulty elements, the reliability of all FPGA resources must be guaranteed. Since resource allocation takes place asynchronously, an online structural test scheme is the only way of ensuring reliable system operation. On the other hand, this test scheme should not disturb the operation of the circuit, otherwise availability would be compromised. System performance is also influenced by the efficiency of the management strategies that must be able to dynamically allocate enough resources when requested by each application. As those resources are allocated and later released, many small free resource blocks are created, which are left unused due to performance and routing restrictions. To avoid wasting logic resources, the FPGA logic space must be defragmented regularly. This paper presents a non-intrusive active replication procedure that supports the proposed test methodology and the implementation of defragmentation strategies, assuring both the availability of resources and their perfect working condition, without disturbing system operation.

Exigências funcionais em pavimentos de madeira

Durante séculos a madeira foi dos materiais mais privilegiados e usados na construção. Ainda hoje, existem construções antigas em madeira em bom estado de conservação e que, desempenham as suas funções adequadamente. Com o aparecimento do betão e do aço, os projetistas deixaram de usar este tipo de estruturas. Isto provocou um desinteresse na indústria da madeira, adiando a criação de regulamentos e normas relativamente às exigências funcionais deste tipo de estruturas. Com a necessidade da reabilitação do património edificado, verifica-se uma inversão desta tendência, devido às edificações no centro histórico serem constituídas por estruturas de madeira, essencialmente os pavimentos e coberturas. Na maioria das vezes estas estruturas apresentam um elevado nível de degradação e a solução mais rentável é demolir. Os pavimentos de madeira são então substituídos por lajes aligeiradas ou de betão armado provocando alterações estruturais inadequadas nas fachadas a manter. Pretende-se com esta dissertação mostrar as potencialidades dos pavimentos de madeira e assim incentivar ao seu uso, principalmente nas áreas a reabilitar. São analisados todos os regulamentos e normas aplicáveis às exigências estruturais, térmicas, acústicas e contra incêndio dos pavimentos de madeira. A análise da normalização aplicável vai ser sintetizada, ou seja, só vão ser referidos os aspetos a ter em conta para a verificação das exigências funcionais em pavimentos de madeira. A aplicação dos conceitos e das verificações necessárias são aplicadas a um pavimento de madeira a ser construído na parcela C4 do Quarteirão das Cardosas. Os resultados obtidos neste caso de estudo são encorajadores, e abrem uma perspetiva das potencialidades que este sistema construtivo apresenta.

Sistema aplicacional para o acompanhamento e monitorização de casos de perturbação psicótica

Pretende-se, na presente dissertação, descrever o trabalho desenvolvido e os conhecimentos adquiridos no decorrer do projeto “iCOPE”, realizado no âmbito do curso de Mestrado em Engenharia de Computação e Instrumentação Médica. O projeto consistiu no desenvolvimento de um sistema aplicacional para o auxílio à prestação de serviços e cuidados de saúde a pacientes com doenças psicóticas tanto através de ferramentas de autogestão, como por funcionalidades que permitirão a um terapeuta monitorizar as ocorrências comunicadas pelos respetivos pacientes atribuídos. As tarefas à responsabilidade do autor desta dissertação compreenderam o levantamento e especificação de requisitos funcionais, o desenvolvimento das funcionalidades e interfaces de gestão de utilizadores e administração do sistema, o desenvolvimento das funcionalidades e interfaces para utilização pelos terapeutas e a criação de ferramentas para a instalação do servidor aplicacional central, existindo ainda cooperação no desenvolvimento de funcionalidades e interfaces para utilização pelos pacientes, nomeadamente ao nível da modelização da base de dados e na realização de testes e deteção de erros. Os resultados da avaliação das interfaces desenvolvidas, obtidos por meio da análise de respostas dadas por um grupo de potenciais utilizadores a um inquérito de usabilidade anónimo, demonstraram que estes estão satisfeitos com a solução implementada, havendo, no entanto, margem para futuros melhoramentos e incremento de funcionalidades.

Développement logiciel par transformation de modèles

La recherche en génie logiciel a depuis longtemps tenté de mieux comprendre le processus de développement logiciel, minimalement, pour en reproduire les bonnes pratiques, et idéalement, pour pouvoir le mécaniser. On peut identifier deux approches majeures pour caractériser le processus. La première approche, dite transformationnelle, perçoit le processus comme une séquence de transformations préservant certaines propriétés des données à l’entrée. Cette idée a été récemment reprise par l’architecture dirigée par les modèles de l’OMG. La deuxième approche consiste à répertorier et à codifier des solutions éprouvées à des problèmes récurrents. Les recherches sur les styles architecturaux, les patrons de conception, ou les cadres d’applications s’inscrivent dans cette approche. Notre travail de recherche reconnaît la complémentarité des deux approches, notamment pour l’étape de conception: dans le cadre du développement dirigé par les modèles, nous percevons l’étape de conception comme l’application de patrons de solutions aux modèles reçus en entrée. Il est coutume de définir l’étape de conception en termes de conception architecturale, et conception détaillée. La conception architecturale se préoccupe d’organiser un logiciel en composants répondant à un ensemble d’exigences non-fonctionnelles, alors que la conception détaillée se préoccupe, en quelque sorte, du contenu de ces composants. La conception architecturale s’appuie sur des styles architecturaux qui sont des principes d’organisation permettant d’optimiser certaines qualités, alors que la conception détaillée s’appuie sur des patrons de conception pour attribuer les responsabilités aux classes. Les styles architecturaux et les patrons de conception sont des artefacts qui codifient des solutions éprouvées à des problèmes récurrents de conception. Alors que ces artefacts sont bien documentés, la décision de les appliquer reste essentiellement manuelle. De plus, les outils proposés n’offrent pas un support adéquat pour les appliquer à des modèles existants. Dans cette thèse, nous nous attaquons à la conception détaillée, et plus particulièrement, à la transformation de modèles par application de patrons de conception, en partie parce que les patrons de conception sont moins complexes, et en partie parce que l’implémentation des styles architecturaux passe souvent par les patrons de conception. Ainsi, nous proposons une approche pour représenter et appliquer les patrons de conception. Notre approche se base sur la représentation explicite des problèmes résolus par ces patrons. En effet, la représentation explicite du problème résolu par un patron permet : (1) de mieux comprendre le patron, (2) de reconnaître l’opportunité d’appliquer le patron en détectant une instance de la représentation du problème dans les modèles du système considéré, et (3) d’automatiser l’application du patron en la représentant, de façon déclarative, par une transformation d’une instance du problème en une instance de la solution. Pour vérifier et valider notre approche, nous l’avons utilisée pour représenter et appliquer différents patrons de conception et nous avons effectué des tests pratiques sur des modèles générés à partir de logiciels libres.

Identification et localisation des préoccupations fonctionnelles dans un code légataire Java

Traditionnellement, les applications orientées objets légataires intègrent différents aspects fonctionnels. Ces aspects peuvent être dispersés partout dans le code. Il existe différents types d’aspects : • des aspects qui représentent des fonctionnalités métiers ; • des aspects qui répondent à des exigences non fonctionnelles ou à d’autres considérations de conception comme la robustesse, la distribution, la sécurité, etc. Généralement, le code qui représente ces aspects chevauche plusieurs hiérarchies de classes. Plusieurs chercheurs se sont intéressés à la problématique de la modularisation de ces aspects dans le code : programmation orientée sujets, programmation orientée aspects et programmation orientée vues. Toutes ces méthodes proposent des techniques et des outils pour concevoir des applications orientées objets sous forme de composition de fragments de code qui répondent à différents aspects. La séparation des aspects dans le code a des avantages au niveau de la réutilisation et de la maintenance. Ainsi, il est important d’identifier et de localiser ces aspects dans du code légataire orienté objets. Nous nous intéressons particulièrement aux aspects fonctionnels. En supposant que le code qui répond à un aspect fonctionnel ou fonctionnalité exhibe une certaine cohésion fonctionnelle (dépendances entre les éléments), nous proposons d’identifier de telles fonctionnalités à partir du code. L’idée est d’identifier, en l’absence des paradigmes de la programmation par aspects, les techniques qui permettent l’implémentation des différents aspects fonctionnels dans un code objet. Notre approche consiste à : • identifier les techniques utilisées par les développeurs pour intégrer une fonctionnalité en l’absence des techniques orientées aspects • caractériser l’empreinte de ces techniques sur le code • et développer des outils pour identifier ces empreintes. Ainsi, nous présentons deux approches pour l’identification des fonctionnalités existantes dans du code orienté objets. La première identifie différents patrons de conception qui permettent l’intégration de ces fonctionnalités dans le code. La deuxième utilise l’analyse formelle de concepts pour identifier les fonctionnalités récurrentes dans le code. Nous expérimentons nos deux approches sur des systèmes libres orientés objets pour identifier les différentes fonctionnalités dans le code. Les résultats obtenus montrent l’efficacité de nos approches pour identifier les différentes fonctionnalités dans du code légataire orienté objets et permettent de suggérer des cas de refactorisation.

Development of a portable composite equipment for coastal fishery and hydrographic investigations

This thesis reports on the details of the works done to develop a complete system for acquisition of the important marine environmental parameters namely, current, current direction, salinity, temperature and depth. It encompaéps transducers,signalconditioners display arrangements and remote controlled multiplexer which constitue the system. The various associate instruentation and environmental requisites and problems have been discussed and solved to considerable extend. The design and development features of this composite system includes an integrated approach in order to make the final equipment to be simple, inexpensive and easy for operation from small and large boats. This could be achieved with the successful development of all required components with features matching between them, such as sensors, signals conditioners remote operated multiplexers, comon display methods, quick performance check and calibration methods. The major success rests on the development of sensors with excellent performance characteristics suitable for marine environment. out of the 5 sensors. that of current salinity and depth are quite noval types with specific advantages. The environmental effects have been eliminated to the required extend. The common signal conditioner for salinity, temperature and depth has noval design features for achieving simplicity, reliability and accomodating the three sensors of different functional requirements.

A Generic Software Architecture for a Domain Specific Distributed Embedded System

In this paper, we have evolved a generic software architecture for a domain specific distributed embedded system. The system under consideration belongs to the Command, Control and Communication systems domain. The systems in such domain have very long operational lifetime. The quality attributes of these systems are equally important as the functional requirements. The main guiding principle followed in this paper for evolving the software architecture has been functional independence of the modules. The quality attributes considered most important for the system are maintainability and modifiability. Architectural styles best suited for the functionally independent modules are proposed with focus on these quality attributes. The software architecture for the system is envisioned as a collection of architecture styles of the functionally independent modules identified

Reducció de vibracions residuals en moviments transitoris. Definició de lleis de moviment per mitjà de corbes B-spline

Molts sistemes mecànics existents tenen un comportament vibratori funcionalment perceptible, que es posa de manifest enfront d'excitacions transitòries. Normalment, les vibracions generades segueixen presents després del transitori (vibracions residuals), i poden provocar efectes negatius en la funció de disseny del mecanisme. El mètode que es proposa en aquesta tesi té com a objectiu principal la síntesi de lleis de moviment per reduir les vibracions residuals. Addicionalment, els senyals generats permeten complir dues condicions definides per l'usuari (anomenats requeriments funcionals). El mètode es fonamenta en la relació existent entre el contingut freqüencial d'un senyal transitori, i la vibració residual generada, segons sigui l'esmorteïment del sistema. Basat en aquesta relació, i aprofitant les propietats de la transformada de Fourier, es proposa la generació de lleis de moviment per convolució temporal de polsos. Aquestes resulten formades per trams concatenats de polinomis algebraics, cosa que facilita la seva implementació en entorns numèrics per mitjà de corbes B-spline.

Impulsiveness as a timing disturbance: neurocognitive abnormalities in attention-deficit hyperactivity disorder during temporal processes and normalization with methylphenidate.

We argue that impulsiveness is characterized by compromised timing functions such as premature motor timing, decreased tolerance to delays, poor temporal foresight and steeper temporal discounting. A model illustration for the association between impulsiveness and timing deficits is the impulsiveness disorder of attention-deficit hyperactivity disorder (ADHD). Children with ADHD have deficits in timing processes of several temporal domains and the neural substrates of these compromised timing functions are strikingly similar to the neuropathology of ADHD. We review our published and present novel functional magnetic resonance imaging data to demonstrate that ADHD children show dysfunctions in key timing regions of prefrontal, cingulate, striatal and cerebellar location during temporal processes of several time domains including time discrimination of milliseconds, motor timing to seconds and temporal discounting of longer time intervals. Given that impulsiveness, timing abnormalities and more specifically ADHD have been related to dopamine dysregulation, we tested for and demonstrated a normalization effect of all brain dysfunctions in ADHD children during time discrimination with the dopamine agonist and treatment of choice, methylphenidate. This review together with the new empirical findings demonstrates that neurocognitive dysfunctions in temporal processes are crucial to the impulsiveness disorder of ADHD and provides first evidence for normalization with a dopamine reuptake inhibitor.

UK commercial property lease structures: Landlord and tenant mismatch

UK commercial property lease structures have come under considerable scrutiny during the past decade since the property crash of the early 1990s. In particular, tenants complained that the system was unfair and that it has blocked business change. Government is committed, through its 2001 election manifesto, to promote flexibility and choice in the commercial property lettings market and a new voluntary Commercial Leases Code of Practice was launched in April 2002. This paper investigates whether occupiers are being offered the leases they require or whether there is a mismatch between occupier requirements and actual leases in the market. It draws together the substantial data now available on the actual terms of leases in the UK and surveys of corporate occupiers' attitude to their occupation requirements. Although the data indicated that UK leases have become shorter and more diverse since 1990, this is still not sufficient to meet the current requirements of many corporate occupiers. It is clear that the inability to manage entry and exit strategies is a major concern to occupiers. Lease length is the primary concern of tenants and a number of respondents comment on the mismatch between lease length in the UK and business planning horizons. The right to break and other problems with alienation clauses also pose serious difficulties for occupiers, thus reinforcing the mismatch. Other issues include repairing and insuring clauses and the type of review clause. There are differences in opinion between types of occupier. In particular, international corporate occupiers are significantly more concerned about the length of lease and the incidence of break clauses than national occupiers and private-sector tenants are significantly more concerned about leasing in general than public-sector occupiers. Proposed solutions by tenants are predictable and include shorter leases, more frequent breaks and relaxation of restrictions concerning alienation and other clauses. A significant number specify that they would pay more for shorter leases and other improved terms. Short leases would make many of the other terms more acceptable and this is why they are the main concern of corporate occupiers. Overall, the evidence suggests that there continues to be a gap between occupiers' lease requirements and those currently offered by the market. There are underlying structural factors that act as an inertial force on landlords and inhibit the changes which occupiers appear to want. Nevertheless, the findings raise future research questions concerning whether UK lease structures are a constraining factor on UK competitiveness.