Reologia dos lodos e de outros sedimentos recentes da Ria de Aveiro

Nos últimos anos têm sido construídas e estão projectadas para a construção várias obras de engenharia civil na região de Aveiro, destacando-se algumas infra-estruturas rodoviárias, ferroviárias e portuárias cujo funcionamento em pleno reveste-se de particular importância dados os seus impactos globalmente positivos na estruturação do tecido socioeconómico da região e do país. Por outro lado, aspectos como a localização geográfica litoral e o enquadramento geológico da cidade de Aveiro, cuja paisagem geomorfológica é dominada pela denominada laguna de Aveiro, são condicionadores da natureza mole, compressível e de baixa capacidade resistente dos terrenos de fundação que ocorrem nesta zona da cidade. A escolha do tema do presente trabalho de investigação, do domínio geotécnico, está associada ao reconhecido comportamento problemático desses solos quando solicitados pelas obras de engenharia civil. Deste modo, o presente trabalho pretende contribuir para a compreensão do comportamento geomecânico que caracteriza os depósitos de solos naturais de origem aluvionar, localizados na zona lagunar da cidade de Aveiro. São investigadas as relações entre o comportamento descrito para estes solos e a sua história geológica e as suas propriedades micro e macro estruturais no estado de ocorrência. Foram seleccionados quatro locais da cidade representativos da ocorrência de depósitos de solos moles nos quais foram realizados ensaios geotécnicos de campo e procedeu-se a recolha de amostras a várias profundidades para estudos geotécnicos de laboratório. Com os ensaios, foram avaliadas as características de identificação e do comportamento reológico (tensãodeformação- resistência ao corte) e a parametrização geotécnica derivada foi interpretada à luz do conhecimento adquirido em outros estudos também realizados do âmbito da geologia e da mineralogia.

Contribution of biomass combustion to air pollutant emissions

In Portugal, it was estimated that around 1.95 Mton/year of wood is used in residential wood burning for heating and cooking. Additionally, in the last decades, burnt forest area has also been increasing. These combustions result in high levels of toxic air pollutants and a large perturbation of atmospheric chemistry, interfere with climate and have adverse effects on health. Accurate quantification of the amounts of trace gases and particulate matter emitted from residential wood burning, agriculture and garden waste burning and forest fires on a regional and global basis is essential for various purposes, including: the investigation of several atmospheric processes, the reporting of greenhouse gas emissions, and quantification of the air pollution sources that affect human health at regional scales. In Southern Europe, data on detailed emission factors from biomass burning are rather inexistent. Emission inventories and source apportionment, photochemical and climate change models use default values obtained for US and Northern Europe biofuels. Thus, it is desirable to use more specific locally available data. The objective of this study is to characterise and quantify the contribution of biomass combustion sources to atmospheric trace gases and aerosol concentrations more representative of the national reality. Laboratory (residential wood combustion) and field (agriculture/garden waste burning and experimental wildland fires) sampling experiments were carried out. In the laboratory, after the selection of the most representative wood species and combustion equipment in Portugal, a sampling program to determine gaseous and particulate matter emission rates was set up, including organic and inorganic aerosol composition. In the field, the smoke plumes from agriculture/garden waste and experimental wildland fires were sampled. The results of this study show that the combustion equipment and biofuel type used have an important role in the emission levels and composition. Significant differences between the use of traditional combustion equipment versus modern equipments were also observed. These differences are due to higher combustion efficiency of modern equipment, reflecting the smallest amount of particulate matter, organic carbon and carbon monoxide released. With regard to experimental wildland fires in shrub dominated areas, it was observed that the largest organic fraction in the samples studied was mainly composed by vegetation pyrolysis products. The major organic components in the smoke samples were pyrolysates of vegetation cuticles, mainly comprising steradienes and sterol derivatives, carbohydrates from the breakdown of cellulose, aliphatic lipids from vegetation waxes and methoxyphenols from the lignin thermal degradation. Despite being a banned practice in our country, agriculture/garden waste burning is actually quite common. To assess the particulate matter composition, the smoke from three different agriculture/garden residues have been sampled into 3 different size fractions (PM2.5, PM2.5-10 and PM>10). Despite distribution patterns of organic compounds in particulate matter varied among residues, the amounts of phenolics (polyphenol and guaiacyl derivatives) and organic acids were always predominant over other organic compounds in the organosoluble fraction of smoke. Among biomarkers, levoglucosan, β-sitosterol and phytol were detected in appreciable amounts in the smoke of all agriculture/garden residues. In addition, inositol may be considered as an eventual tracer for the smoke from potato haulm burning. It was shown that the prevailing ambient conditions (such as high humidity in the atmosphere) likely contributed to atmospheric processes (e.g. coagulation and hygroscopic growth), which influenced the particle size characteristics of the smoke tracers, shifting their distribution to larger diameters. An assessment of household biomass consumption was also made through a national scale survey. The information obtained with the survey combined with the databases on emission factors from the laboratory and field tests allowed us to estimate the pollutant amounts emitted in each Portuguese district. In addition to a likely contribution to the improvement of emission inventories, emission factors obtained for tracer compounds in this study can be applied in receptor models to assess the contribution of biomass burning to the levels of atmospheric aerosols and their constituents obtained in monitoring campaigns in Mediterranean Europe.

Sensores ópticos para monitorização dinâmica de estruturas

O presente trabalho centra-se no desenvolvimento e aplicação de sensores de aceleração ópticos, baseados em redes de Bragg gravadas em fibras ópticas, para monitorização da integridade estrutural de estruturas de engenharia civil. Foram implementados dois acelerómetros uniaxiais e um acelerómetro biaxial. Recorreu-se a uma ferramenta de simulação baseada no método dos elementos finitos que permitiu optimizar, sem custos de produção, as características dos sensores, nomeadamente a sua frequência de ressonância. A caracterização dos sensores foi realizada em ambiente laboratorial e a sua resposta comparada com os resultados de simulação, de modo a validar os modelos numéricos. A aplicabilidade e demonstração de conceito foram realizadas na monitorização de estruturas com testes de campo. Foi monitorizado um teste destrutivo de uma parede de adobe, construída à escala real no Departamento de Engenharia Civil da Universidade de Aveiro, onde foram utilizados sensores estáticos e dinâmicos baseados em redes de Bragg gravadas em fibra óptica. Foram realizadas medidas dinâmicas na ponte pedonal do Campus Universitário da Universidade de Aveiro, onde se compararam os resultados obtidos com os sensores ópticos com resultados de sensores electrónicos comerciais. O acelerómetro biaxial foi testado na monitorização de estruturas esbeltas, nomeadamente na monitorização de duas torres de telecomunicações móveis, onde se demonstrou a possibilidade da utilização de sensores ópticos na caracterização dinâmica deste tipo de estruturas. Outro tipo de estruturas de engenharia civil onde foi demonstrada a aplicabilidade dos sensores ópticos desenvolvidos na monitorização estrutural foram os reservatórios de água elevados. Foi realizada a monitorização dinâmica de um exemplo deste tipo de estruturas, localizado no Campus Universitário da Universidade de Aveiro. A monitorização foi realizada recorrendo ao sensor biaxial desenvolvido e a um sismógrafo, ficando o sensor óptico instalado na estrutura de modo a permitir futuras leituras e assim a monitorização periódica da estrutura. Foi ainda desenvolvido um sensor de humidade relativa do ar, com um material sol-gel, que permitiu registar o nível de humidade relativa no interior de blocos de betão, durante um ano. Este sensor pode ser incluído numa rede de sensores multiplexados, na caracterização e monitorização da integridade estrutural de certas estruturas de engenharia civil.

Hidrogeomorfologia e sustentabilidade de recursos hídricos subterrâneos

A água subterrânea de rochas duras é uma fonte importante para fins domésticos, industriais e agrícolas e mesmo para o consumo humano. A geologia, a tectónica, a geomorfologia e as características hidrológicas controlam o fluxo, ocorrência e armazenamento das águas subterrâneas. A disponibilidade da água subterrânea no meio geológico está totalmente dependente das áreas de recarga e de descarga numa determinada bacia. A precipitação é a principal fonte de recarga em aquíferos descontínuos, enquanto que a descarga depende dos declives do terreno e dos gradientes do nível hidrostático e ainda das condições hidrogeológicas do solo. A hidrogeomorfologia é um domínio interdisciplinar emergente, que estuda as relações entre as unidades geomorfológicas e o regime das águas superficiais e subterrâneas de uma determinada área. A compreensão do papel da geomorfologia é essencial para avaliar de forma rigorosa os sistemas hidrogeológicos e os recursos hídricos. Os dados de detecção remota providenciam uma informação espacial valiosa e actualizada da superfície terrestre e dos recursos naturais. Os recentes avanços tecnológicos colocaram as técnicas de detecção remota e os sistemas de informação geográfica (SIG) numa posição cimeira como ferramentas de gestão metodológica. Foi criada, em ambiente SIG, uma base de geo-dados, essencialmente derivada da detecção remota, da cartografia e do trabalho de campo. Esta base de dados, organizada em diferentes níveis de informação, inclui uma avaliação principalmente focalizada no uso do solo, climatologia, declives, geologia, geomorfologia e hidrogeologia. No presente estudo foram cruzados diversos níveis de informação, com a geração de múltiplos mapas temáticos para atingir um quadro integrado dos diversos sectores no Norte e Centro de Portugal. Os sectores em estudo (Caldas da Cavaca, Termas de Entre-os-Rios, Águas de Arouca e Águas do Alardo) estão localizados em sistemas hidrogeológicos predominantemente constituídos por rochas graníticas, por vezes intersectadas por filões de quartzo, aplito-pegmatíticos e doleríticos. Para apoiar a elaboração dos mapas hidrogeomorfológicos foi criada uma base SIG, contendo diversa informação, nomeadamente topografia, hidrografia, litologia, tectónica, morfoestrutura, hidrogeologia, geofísica e uso do solo. Além disso, foram realizadas várias campanhas de campo, as quais permitiram: o estabelecimento dum mapeamento geológico, geomorfológico e hidrogeológico; a caracterização in situ do grau de alteração, resistência e grau de fracturação dos maciços rochosos; o desenvolvimento de um inventário hidrogeológico em conjunto com alguns ensaios expeditos in situ. A interligação entre os parâmetros geomorfológicos, hidrológicos e hidrogeológicos dos sistemas de água subterrânea “normal” e hidromineral destaca a importância de uma cartografia e duma modelação conceptual hidrogeomorfológica. Além disso, contribuirá para um melhor apoio à decisão na gestão sustentável dos recursos hídricos.

Avaliação experimental do comportamento dinâmico de um edifício do século XIX: aplicação à calibração de modelos numéricos

Trabalho de Dissertação de natureza científica para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Estruturas

A distributed algorithm for hexagonal topology formation in wireless sensor networks

Hexagonal wireless sensor network refers to a network topology where a subset of nodes have six peer neighbors. These nodes form a backbone for multi-hop communications. In a previous work, we proposed the use of hexagonal topology in wireless sensor networks and discussed its properties in relation to real-time (bounded latency) multi-hop communications in large-scale deployments. In that work, we did not consider the problem of hexagonal topology formation in practice - which is the subject of this research. In this paper, we present a decentralized algorithm that forms the hexagonal topology backbone in an arbitrary but sufficiently dense network deployment. We implemented a prototype of our algorithm in NesC for TinyOS based platforms. We present data from field tests of our implementation, collected using a deployment of fifty wireless sensor nodes.

Differential effect of long versus short wavelength light exposure on pupillary re-dilation in patients with outer retinal disease.

BACKGROUND: In patients with outer retinal degeneration, a differential pupil response to long wavelength (red) versus short wavelength (blue) light stimulation has been previously observed. The goal of this study was to quantify differences in the pupillary re-dilation following exposure to red versus blue light in patients with outer retinal disease and compare them with patients with optic neuropathy and with healthy subjects. DESIGN: Prospective comparative cohort study. PARTICIPANTS: Twenty-three patients with outer retinal disease, 13 patients with optic neuropathy and 14 normal subjects. METHODS: Subjects were tested using continuous red and blue light stimulation at three intensities (1, 10 and 100 cd/m2) for 13 s per intensity. Pupillary re-dilation dynamics following the brightest intensity was analysed and compared between the three groups. MAIN OUTCOME MEASURES: The parameters of pupil re-dilation used in this study were: time to recover 90% of baseline size; mean pupil size at early and late phases of re-dilation; and differential re-dilation time for blue versus red light. RESULTS: Patients with outer retinal disease showed a pupil that tended to stay smaller after light termination and thus had a longer time to recovery. The differential re-dilation time was significantly greater in patients with outer retinal disease (median = 28.0 s, P < 0.0001) compared with controls and patients with optic neuropathy. CONCLUSIONS: A differential response of pupil re-dilation following red versus blue light stimulation is present in patients with outer retinal disease but is not found in normal eyes or among patients with visual loss from optic neuropathy.

The role of physical activity and perceived adequacy on cardiorespiratory fitness in children with developmental coordination disorder

Evidence suggests that children with developmental coordination disorder (DCD) have lower levels of cardiorespiratory fitness (CRF) compared to children without the condition. However, these studies were restricted to field-based methods in order to predict V02 peak in the determination of CRF. Such field tests have been criticised for their ability to provide a valid prediction of V02 peak and vulnerability to psychological aspects in children with DCD, such as low perceived adequacy toward physical activity. Moreover, the contribution of physical activity to the variance in V02 peak between the two groups is unknown. The purpose of our study was to determine the mediating role of physical activity and perceived adequacy towards physical activity on V02 peak in children with significant motor impairments. This prospective case-control design involved 122 (age 12-13 years) children with significant motor impairments (n=61) and healthy matched controls (n=61) based on age, gender and school location. Participants had been previously assessed for motor proficiency and classified as a probable DCD (p-DCD) or healthy control using the movement ABC test. V02 peak was measured by a progressive exercise test on a cycle ergometer. Perceived adequacy was measured using a 7 -item subscale from Children's Selfperception of Adequacy and Predilection for Physical Activity scale. Physical activity was monitored for seven days with the Actical® accelerometer. Children with p-DCD had significantly lower V02 peak (48.76±7.2 ml/ffm/min; p:50.05) compared to controls (53.12±8.2 ml/ffm/min), even after correcting for fat free mass. Regression analysis demonstrated that perceived adequacy and physical activity were significant mediators in the relationship between p-DCD and V02 peak. In conclusion, using a stringent laboratory assessment, the results of the current study verify the findings of earlier studies, adding low CRF to the list of health consequences associated with DCD. It seems that when testing for CRF in this population, there is a need to consider the psychological barriers associated with their condition. Moreover, strategies to increase physical activity in children with DCD may result in improvement in their CRF.

Photovoltaic hybrid systems for rural electrification in the Mekong countries

In rural areas of the Mekong Countries, the problem of electricity supplying rural communities is particularly alarming. Supplying power to these areas requires facilities that are not economically viable. However, government programs are under way to provide this product that is vital to community well being. A nation priority of Mekong Countries is to provide electrical power to people in rural areas, within normal budgetary constraints. Electricity must be introduced into rural areas in such a way that maximize the technical, economic and social benefit. Another consideration is the source of electrical generation and the effects on the natural environment. The main research purpose is to implement field tests, monitoring and evaluation of the PV-Diesel Hybrid System (PVHS) at the Energy Park of School of Renewable Energy Technology (SERT) in order to test the PVSH working under the meteorological conditions of the Mekong Countries and to develop a software simulation called RES, which studies the technical and economic performance of rural electrification options. This software must be easy to use and understand for the energy planner on rural electrification projects, to evaluate the technical and economic performance of the PVHS based on the renewable energy potential for rural electrification of the Mekong Country by using RES. Finally, this project aims to give guidance for the possible use of PVHS application in this region, particularly in regard to its technical and economic sustainability. PVHS should be promoted according to the principles of proper design and adequate follow up with maintenance, so that the number of satisfied users will be achieved. PVHS is not the only possible technology for rural electrification, but for the Mekong Countries it is one of the most proper choices. Other renewable energy options such as wind, biomass and hydro power need to be studied in future.

Capacidad aeróbica de bomberos aeronáuticos

Los bomberos aeronáuticos son los encargados de atender todas las emergencias en los aeropuertos y sus cercanías. Estas emergencias incluyen emergencias aéreas, en tierra, eventos con materiales peligros e incendios, entre otros. Su trabajo tiene como características la realización de actividades durante periodos largos de baja intensidad y periodos cortos de alta intensidad. De acuerdo con estas características, es necesario que los bomberos aeronáuticos tengan una buena condición física. El consumo máximo de oxígeno (VO2 máx) como indicador de capacidad aeróbica resulta indispensable para conocer el desempeño de los bomberos en su trabajo. El objetivo de este estudio es determinar la capacidad aeróbica de los bomberos aeronáuticos y sus factores determinantes. Por tanto se desarrolló un estudio transversal de tipo descriptivo en una muestra de 23 hombres bomberos aeronáuticos. Se obtuvo información acerca de sus variables socio-demográficas, se determinó el VO2 máx y umbral ventilatorio mediante análisis de gases espirados durante un protocolo de ejercicio máximo sobre tapiz rodante, se evaluó la composición corporal mediante adipometría y se determinó el nivel de actividad física mediante el cuestionario internacional de actividad física IPAQ. Se encontró que la muestra tenia una edad de 32,6 ± 4,8 años, peso de 78,4 ± 9,8 kg, porcentaje de grasa de 14,8 ± 3,8 %, índice de masa corporal de 25,7 ± 2,7 y VO2máx de 44,6 ± 6. No se encontraron cambios significativos del VO2máx con la edad, pero si con la actividad física, porcentaje de grasa e índice de masa corporal. Se sugiere que el entrenamiento de los bomberos aeronáuticos durante su jornada laboral sea de intervalos de alta intensidad y que se monitorice su nivel de actividad física y composición corporal.

Assessment of cognitive symptoms in prodromal and early Huntington disease

The Functional Rating Scale Taskforce for pre-Huntington Disease (FuRST-pHD) is a multinational, multidisciplinary initiative with the goal of developing a data-driven, comprehensive, psychometrically sound, rating scale for assessing symptoms and functional ability in prodromal and early Huntington disease (HD) gene expansion carriers. The process involves input from numerous sources to identify relevant symptom domains, including HD individuals, caregivers, and experts from a variety of fields, as well as knowledge gained from the analysis of data from ongoing large-scale studies in HD using existing clinical scales. This is an iterative process in which an ongoing series of field tests in prodromal (prHD) and early HD individuals provides the team with data on which to make decisions regarding which questions should undergo further development or testing and which should be excluded. We report here the development and assessment of the first iteration of interview questions aimed to assess cognitive symptoms in prHD and early HD individuals.

Assessment of day-to-day functioning in prodromal and early Huntington disease

The Functional Rating Scale Taskforce for pre-Huntington Disease (FuRST-pHD) is a multinational, multidisciplinary initiative with the goal of developing a data-driven, comprehensive, psychometrically sound, rating scale for assessing symptoms and functional ability in prodromal and early Huntington disease (HD) gene expansion carriers. The process involves input from numerous sources to identify relevant symptom domains, including HD individuals, caregivers, and experts from a variety of fields, as well as knowledge gained from the analysis of data from ongoing large-scale studies in HD using existing clinical scales. This is an iterative process in which an ongoing series of field tests in prodromal (prHD) and early HD individuals provides the team with data on which to make decisions regarding which questions should undergo further development or testing and which should be excluded. We report here the development and assessment of the first iteration of interview questions aimed to assess functional impact in day-to-day activities in prHD and early HD individuals.

Assessing behavioural manifestations prior to clinical diagnosis of Huntington disease: "anger and irritability" and "obsessions and compulsions"

The Functional Rating Scale Taskforce for pre-Huntington Disease (FuRST-pHD) is a multinational, multidisciplinary initiative with the goal of developing a data-driven, comprehensive, psychometrically sound, rating scale for assessing symptoms and functional ability in prodromal and early Huntington disease (HD) gene expansion carriers. The process involves input from numerous sources to identify relevant symptom domains, including HD individuals, caregivers, and experts from a variety of fields, as well as knowledge gained from the analysis of data from ongoing large-scale studies in HD using existing clinical scales. This is an iterative process in which an ongoing series of field tests in prodromal (prHD) and early HD individuals provides the team with data on which to make decisions regarding which questions should undergo further development or testing and which should be excluded. We report here the development and assessment of the first iteration of interview questions aimed to assess "Anger and Irritability" and "Obsessions and Compulsions" in prHD individuals.

Assessment of depression, anxiety and apathy in prodromal and early Huntington disease

The Functional Rating Scale Taskforce for pre-Huntington Disease (FuRST-pHD) is a multinational, multidisciplinary initiative with the goal of developing a data-driven, comprehensive, psychometrically sound, rating scale for assessing symptoms and functional ability in prodromal and early Huntington disease (HD) gene expansion carriers. The process involves input from numerous sources to identify relevant symptom domains, including HD individuals, caregivers, and experts from a variety of fields, as well as knowledge gained from the analysis of data from ongoing large-scale studies in HD using existing clinical scales. This is an iterative process in which an ongoing series of field tests in prodromal (prHD) and early HD individuals provides the team with data on which to make decisions regarding which questions should undergo further development or testing and which should be excluded. We report here the development and assessment of the first iteration of interview questions aimed to assess Depression, Anxiety and Apathy in prHD and early HD individuals.