Formation of elliptically polarized beam from h-plane sectoral horns using corrugated flanges

The flange technique, suggested by Reynolds72 is simple technique to improve antenna characteristics. Using flange technique we can trim the antenna characteristic by suitably adjusting the flange parameters75. Later corrugated flanges87 are used for beam shaping. The important parameters of the corrugated flanges are (a) flange angle, (b) flange width, (c) flange position, (d) conductivity of the flange, (e) amplitude excitation of the flange elements, (f) period of corrugation etc. Compared to a compound horn the flange technique offers great convenience in trimming antenna characteristics. Horns are commonly used as a feed in radar and satellite communications. A large number of work had been done to improve the characteristics of horn antennas. It is an established fact that grooved walls on the inner surface of a horn can improve the antenna characteristics44. Corrugated comb surface can be used for the circular polarization98, tilt of polarization99 etc. This suggests the possibility to combine these two phenomena and to obtain a resultant beam. This thesis presents the result of an investigation to study the possibility of controlling different antenna characteristics like polarization, beam shaping, matching etc, using corrugated flange techniques.

Entwicklung eines Windleistungprognosemodells zur Verbesserung der Kraftwerkseinsatzplanung

Die Maßnahmen zur Förderung der Windenergie in Deutschland haben wichtige Anstöße zur technologischen Weiterentwicklung geliefert und die Grundlagen für den enormen Anlagenzubau geschaffen. Die installierte Windleistung hat heute eine beachtliche Größenordnung erreicht und ein weiteres Wachstum in ähnlichen Dimensionen ist auch für die nächsten Jahre zu erwarten. Die aus Wind erzeugte elektrische Leistung deckt bereits heute in einigen Netzbereichen die Netzlast zu Schwachlastzeiten. Dies zeigt, dass die Windenergie ein nicht mehr zu vernachlässigender Faktor in der elektrischen Energieversorgung geworden ist. Im Rahmen der Kraftwerkseinsatzplanung sind Betrag und Verlauf der Windleistung des folgenden Tages mittlerweile zu wichtigen und zugleich schwierig zu bestimmenden Variablen geworden. Starke Schwankungen und falsche Prognosen der Windstromeinspeisung verursachen zusätzlichen Bedarf an Regel- und Ausgleichsleistung durch die Systemführung. Das im Rahmen dieser Arbeit entwickelte Prognosemodell liefert die zu erwartenden Windleistungen an 16 repräsentativen Windparks bzw. Gruppen von Windparks für bis zu 48 Stunden im Voraus. Aufgrund von prognostizierten Wetterdaten des deutschen Wetterdienstes (DWD) werden die Leistungen der einzelnen Windparks mit Hilfe von künstlichen neuronalen Netzen (KNN) berechnet. Diese Methode hat gegenüber physikalischen Verfahren den Vorteil, dass der komplexe Zusammenhang zwischen Wettergeschehen und Windparkleistung nicht aufwendig analysiert und detailliert mathematisch beschrieben werden muss, sondern anhand von Daten aus der Vergangenheit von den KNN gelernt wird. Das Prognosemodell besteht aus zwei Modulen. Mit dem ersten wird, basierend auf den meteorologischen Vorhersagen des DWD, eine Prognose für den Folgetag erstellt. Das zweite Modul bezieht die online gemessenen Leistungsdaten der repräsentativen Windparks mit ein, um die ursprüngliche Folgetagsprognose zu verbessern und eine sehr genaue Kurzzeitprognose für die nächsten drei bis sechs Stunden zu berechnen. Mit den Ergebnissen der Prognosemodule für die repräsentativen Standorte wird dann über ein Transformationsmodell, dem so genannten Online-Modell, die Gesamteinspeisung in einem größeren Gebiet berechnet. Das Prognoseverfahren hat seine besonderen Vorzüge in der Genauigkeit, den geringen Rechenzeiten und den niedrigen Betriebskosten, da durch die Verwendung des bereits implementierten Online-Modells nur eine geringe Anzahl von Vorhersage- und Messstandorten benötigt wird. Das hier vorgestellte Prognosemodell wurde ursprünglich für die E.ON-Netz GmbH entwickelt und optimiert und ist dort seit Juli 2001 im Einsatz. Es lässt sich jedoch auch leicht an andere Gebiete anpassen. Benötigt werden dazu nur die Messdaten der Leistung ausgewählter repräsentativer Windparks sowie die dazu gehörenden Wettervorhersagen, um die KNN entsprechend zu trainieren.

Updated empirical model of genetically-modified maize grain production practices to achieve European Union labeling thresholds

An updated empirical approach is proposed for specifying coexistence requirements for genetically modified (GM) maize (Zea mays L.) production to ensure compliance with the 0.9% labeling threshold for food and feed in the European Union. The model improves on a previously published (Gustafson et al., 2006) empirical model by adding recent data sources to supplement the original database and including the following additional cases: (i) more than one GM maize source field adjacent to the conventional or organic field, (ii) the possibility of so-called “stacked” varieties with more than one GM trait, and (iii) lower pollen shed in the non-GM receptor field. These additional factors lead to the possibility for somewhat wider combinations of isolation distance and border rows than required in the original version of the empirical model. For instance, in the very conservative case of a 1-ha square non-GM maize field surrounded on all four sides by homozygous GM maize with 12 m isolation (the effective isolation distance for a single GM field), non-GM border rows of 12 m are required to be 95% confident of gene flow less than 0.9% in the non-GM field (with adventitious presence of 0.3%). Stacked traits of higher GM mass fraction and receptor fields of lower pollen shed would require a greater number of border rows to comply with the 0.9% threshold, and an updated extension to the model is provided to quantify these effects.

Population structure and associated phenotypes of Salmonella enterica serovars Derby and Mbandaka overlap with host range

BACKGROUND:The Salmonella enterica serovar Derby is frequently isolated from pigs and turkeys whereas serovar Mbandaka is frequently isolated from cattle, chickens and animal feed in the UK. Through comparative genomics, phenomics and mutant construction we previously suggested possible mechanistic reasons why these serovars demonstrate apparently distinct host ranges. Here, we investigate the genetic and phenotypic diversity of these two serovars in the UK. We produce a phylogenetic reconstruction and perform several biochemical assays on isolates of S. Derby and S. Mbandaka acquired from sites across the UK between the years 2000 and 2010. RESULTS:We show that UK isolates of S. Mbandaka comprise of one clonal lineage which is adapted to proficient utilisation of metabolites found in soya beans under ambient conditions. We also show that this clonal lineage forms a biofilm at 25 °C, suggesting that this serovar maybe well adapted to survival ex vivo, growing in animal feed. Conversely, we show that S. Derby is made of two distinct lineages, L1 and L2. These lineages differ genotypically and phenotypically, being divided by the presence and absence of SPI-23 and the ability to more proficiently invade porcine jejunum derived cell line IPEC-J2. CONCLUSION:The results of this study lend support to the hypothesis that the differences in host ranges of S. Derby and S. Mbandaka are adaptations to pathogenesis, environmental persistence, as well as utilisation of metabolites abundant in their respective host environments.

Energy Storage for a Grid-Connected PV-System: A Feasibility Study

The work presented in this thesis concerns the dimensioning of an Energy Storage System (ESS) which will be used as an energy buffer for a grid-connected PV plant. This ESS should help managing the PV plant to inject electricity into the grid according to the requirements of the grid System Operator. It is desired to obtain a final production not below 1300kWh/kWp with a maximum ESS budget of 0.9€/Wp. The PV plant will be sited in Martinique Island and connected to the main grid. This grid is a small one where the perturbations due clouds in the PV generation are not negligible anymore. A software simulation tool, incorporating a model for the PV-plant production, the ESS and the required injection pattern of electricity into the grid has been developed in MS Excel. This tool has been used to optimize the relevant parameters defining the ESS so that the feed-in of electricity into the grid can be controlled to fulfill the conditions given by the System Operator. The inputs used for this simulation tool are, besides the conditions given by the System Operator on the allowed injection pattern, the production data from a similar PV-plant in a close-by location, and variables for defining the ESS. The PV production data used is from a site with similar climate and weather conditions as for the site on the Martinique Island and hence gives information on the short term insolation variations as well as expected annual electricity production. The ESS capacity and the injected electric energy will be the main figures to compare while doing an economic study of the whole plant. Hence, the Net Present Value, Benefit to Cost method and Pay-back period studies are carried on as dependent of the ESS capacity. The conclusion of this work is that it is possible to obtain the requested injection pattern by using an ESS. The design of the ESS can be made within an acceptable budget. The capacity of ESS to link with the PV system depends on the priorities of the final output characteristics, and it also depends on which economic parameter that is chosen as a priority.

Energy subsidies and WTO dispute settlement: why only renewable energy subsidies are challenged?

Over the past few years, renewable energy subsidies have become one of the main sources of trade disputes in the WTO. A total of six cases have been initiated against renewable energy subsidy programs since the first of such disputes was brought by Japan against Canada’s Feed in Tariff (FIT) program in 2010. Yet not even a single case has so far been initiated against the much larger and environmentally harmful fossil fuel subsidies. The main objective of this paper is to examine what makes renewable energy subsidies vulnerable to WTO dispute, as compared fossil fuel subsidies.

The influence of triiodothyronine (T-3) on the early development of piracanjuba (Brycon orbignyanus)

This paper reports the triiodothyronine's (T-3) effects on the early growth and survival of piracanjuba (Brycon orbignyanus) produced from fertilized eggs hormone exposed The study was carried out in two phases In the first phase, eggs divided in 6 batches were Immersed in T-3 solutions 0 01, 0 05, 0 1, 0 5 ppm, 1 ppm and control (no T-3) After a 15-min immersion, eggs were transferred to incubators where larvae were kept up to 72 h after hatching Larval weight, length and yolk sac volume were determined every 12 h Sixty and 72 h after hatching, larvae exposed to 0 5 ppm T-3 were significantly heavier than the others, and those exposed to 1 ppm T-3 showed the lowest weight The yolk sac absorption was not affected In the second experimental phase, the resulting fry from the first phase were stocked into 3 boxes per treatment (5 larvae L-1) and fed with plankton, fish larvae and feed prepared in the hatchery (48% CP) in the first 3 days, plankton and feed from the 4th to the 10th day and only feed in the next (last) 5 days Fry weight, length and specific growth rate were determined at 1, 5, 10 and 15 days Survival was calculated in the last day In the 15th day, fry length did not differ among treatments but the weight of the control group was higher Higher survival in the T-3-treated groups suggested lower predation among fry The results allowed us to conclude that there was no expressive effect of T-3 on the growth, but it improved the survival of the piracanjuba progeny

Guinea Pigs Develop Cutaneous Basophilia after Repeated Infestations by Nymphs of the Tick Amblyomma triste

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Viabilidade do uso de secadores solar de convecção natural e forçada para a secagem do coco Licuri

Licuri is a palm tree from the semiarid regions of Bahia State, Brazil. It is an important source of food and feed in that region, since their nuts are commonly eaten by humans and used as maize substitute for poultry feeding. The aim of this dissertation is to study the feasibility for use of natural convection solar dryers and forced being compared with the traditional drying outdoors for drying coconut licuri Syagrus coronate. The study led to the construction of two prototype solar dryer for carrying out experiments proving: model Solar Drying System Direct Exposure to Natural Convection built with wood, has a drying chamber with direct cover transparent glass laminates 4 mm, using techniques for proper isolation of the drying chamber. The two prototypes were comparatively analyzed for performance and drying efficiency with traditional extractive use by the community. Were evaluated the variables: time and drying rates and quality of the final samples of coconut licuri. The fruits were harvested and brought the town of Ouricuri, in the city of Caldeirão Grande, BA for the experiments comparing the three methods of drying was used a standard load of 4.0 kg The quantitative analysis for the result of the drying rate was found in 74% yield and 44% for natural and forced convection respectively compared with the traditional drying. These drying rates represent variation 3-5 times lower. Drying using forced convection licuri showed better quality, was found in a reddish pulp, representing the quantities that were kept of the nutrient beta carotene, and not notice the flavor change from the previous system, the final cost of construction of this system were higher . The prototypes built competitive advantage and had testified fully to resolve the technical difficulties previously encountered in the production of products made of coconut licuri. Allowing add value and increase their potential use for the fruit extractive communities of semi-arid region of Bahia

Influência da densidade de estocagem sobre o crescimento, ciclo de muda e o comportamento em juvenis do camarão marinho Litopenaeus vannamei

One of the factors that may interfere with the cultivation of Litopenaeus vannamei is the population density. This study aimed to assess the effect of density on growth, mortality, physical integrity and behavior of shrimp. The study was divided into two stages. At first, the shrimp were placed in tanks at densities of 50, 75 and 100 shrimp m-2. The animals were monitored in relation to the degree of proventricular filling, the stage of the molt cycle and physical integrity three times a week and in relation to the weight and length once a week. Mortality, growth and proventricular filling were not influenced by the density; frequency of records in specific stages of the molt cycle varied according to the density. The lower proportion of broken appendages and higher frequency of necrotic lesions occurred in lower density. The second stage of the research, conducted in aquaria, was divided into two parts. The first described social or feeding behavioral categories: slow displacement by contact, slow displacement by approximation, abrupt displacement by contact, abrupt displacement by approximation, reactivity, cannibalism, occupying the tray, get feed in the tray and get feed outside the tray. In the second part, these and other behavioral categories, described in the literature, were recorded in densities of 50, 75 and 100 shrimp m-2. Mortality was more frequent in higher density. The frequency of most behaviors mentioned above was very low, not differing between densities or being too low to determine differences between them. The behavioral profile of animals in different densities was, in general, very similar, with no difference in exploration, digging and cleaning between the densities. Even so, inactivity, feeding, crawling, burrowing, swimming, and proximity between animals were influenced by the density. These results suggest that some behaviors suffer greater interference from population density. However, the density may not have a broader influence on the animals when other factors, such as physico-chemical parameters of water and feed offering, are adequate

Efeito do grupo genético e heterose na terminação de vacas de descarte em confinamento

O experimento teve como objetivo avaliar, durante a fase de terminação, o peso, o consumo alimentar, o ganho de peso e a conversão alimentar de vacas de descarte, puras (Charolês-C e Nelore-N) e cruzadas F1 ( ½ CN e ½ NC), bem como medir a heterose resultante. As vacas foram confinadas por um período de 80 dias, sendo todas alimentadas com a mesma dieta, contendo 10% de proteína bruta e uma relação volumoso:concentrado de 65:35. Vacas F1 foram mais pesadas no início (402 vs 362 kg) e no final do confinamento (524 vs 475 kg), sendo a heterose de 11,05 e 10,31%, respectivamente. O ganho de peso médio diário das vacas F1 (1,557 kg) foi similar ao das puras (1,424 kg). O consumo voluntário de matéria seca (CMS) em kg/animal/dia (CMSD) foi 11,26% superior nas vacas F1 em relação às puras. No entanto, ao expressar o CMS por unidade de peso metabólico (CMSM) e por 100 kg de peso vivo (CMSP), a diferença decresceu para 3,25 e 3,57%, respectivamente, e deixou de ser significativa. Vacas C foram mais pesadas e apresentaram maior ganho de peso médio diário que vacas N (1,554 contra 1,294 kg). Vacas ½ CN foram mais pesadas e mais eficientes na transformação de alimentos em ganho de peso que vacas ½ NC.

Selection of alfalfa cultivars adapted for tropical environments with repeated measures using PROC MIXED of SAS (R) System

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito hipotensor do extrato aquoso de alpiste (Phalaris canariensis L.) em ratos

The plant species Phalaris canariensis, known as canary grass, is widely used in folk medicine as diuretic, as well as in culinary and animal feed. In this study, the effect of P. canariensis aqueous extract (AE) on water flow (V) and sodium renal excretion (Qe (Na+)) was evaluated in anesthetized Wistar rats. Arterial pressure alterations (AP) were also assessed. Two groups were studied: Control group (CON) - oral administration of 1.0 mL distilled water, and Experimental group (EA) - oral administration of 1.0 mL P. canariensis aqueous extract 40%. Rats were anesthetized and subjected to cannulation of trachea (for better pulmonary ventilation), left carotid artery (for arterial pressure measurement) and urinary bladder (for urine collection). Control animals did not present significant alterations (p>0.05) in all analyzed parameters after water administration. EA group had a significant arterial pressure reduction at 60 minutes (31.4%) and 90 minutes (49.1%) after the extract administration (p<0.05). Renal parameters did not have any significant alteration (p>0.05). In this study, P. canariensis aqueous extract had a hypotensive effect in anesthetized Wistar rats, without renal alterations.

Espermatogênese e comportamento nucleolar em espécies da família pentatomidae (Heteroptera) de importância econômica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fuentes renovables de energía en América Latina y el Caribe: situación y propuestas de políticas

Incluye Bibliografía