Fem sportsmäns resa till kontinenten, berättad af två af dem: sommarminnen och dagboksblad

Lisäpainokset: 2. p. 1886 (181 s.).

Fem sportsmäns resa till kontinenten, berättad af två af dem: sommarminnen och dagboksblad

Lisäpainokset: 2. p. 1886 (181 s.).

Female pelvic floor disorders – outcome after mesh-augmented procedures and studies on vaginal connective tissue

Pelvic floor disorders, such as urinary incontinence (UI) and pelvic organ prolapse (POP), are common disorders in women. Because of the prolonged life expectancy the prevalence of UI and POP and the probability of ending up in surgery are increasing. However, the pathophysiology behind these disorders is still unsolved. The aim of this thesis is to study possible alterations in the connective tissue in the vaginal wall in patients with and without POP. The long-term outcome and complications of mid-urethral slings (MUS) and mesh-augmented POP surgery were studied in heterogenic patient populations. More elastin and a slight increase in immunostaining of type III and V collagens in tissue samples were obtained from patients with POP compared to controls in whom type I collagen was more prominent. The studies assessing the mesh-augmented procedures revealed good efficacy and high patient satisfaction after a long-term follow-up. Patients operated on because of mixed incontinence and with BMI >30 kg/m² reported significantly more urinary symptoms and a lower quality of life than the patients operated on because of stress urinary incontinence and the ones with BMI ≤30 kg/m². The objective outcome was equal between the groups. Mesh exposure through vaginal mucosa occurred in 23 % of the patients after POP surgery, most of these being asymptomatic. There are alterations in connective tissues in patients with POP. Mid-urethral sling procedures produced good long-term cure rates and patient satisfaction. As to the prolapse surgery, in spite of relatively high exposure rate, mesh-augmented procedure proved to be safe and effective method for the correction of POP.

3D Mesh Simplification. A survey of algorithms and CAD model simplification tests

Simplification of highly detailed CAD models is an important step when CAD models are visualized or by other means utilized in augmented reality applications. Without simplification, CAD models may cause severe processing and storage is- sues especially in mobile devices. In addition, simplified models may have other advantages like better visual clarity or improved reliability when used for visual pose tracking. The geometry of CAD models is invariably presented in form of a 3D mesh. In this paper, we survey mesh simplification algorithms in general and focus especially to algorithms that can be used to simplify CAD models. We test some commonly known algorithms with real world CAD data and characterize some new CAD related simplification algorithms that have not been surveyed in previous mesh simplification reviews.

Litteracitet i fem högstadieungdomars en-till-en-datorpraktiker

The study focuses on five lower secondary school pupils’ daily use of their one-toone computers, the overall aim being to investigate literacy in this form of computing. Theoretically, the study is rooted in the New Literacy tradition with an ecological perspective, in combination with socio-semiotic theory in a multimodal perspective. New Literacy in the ecological perspective focuses on literacy practices and place/space and on the links between them. Literacy is viewed as socially based, in specific situations and in recurring social practices. Socio-semiotic theory embodying the multimodal perspective is used for the text analysis. The methodology is known as socio-semiotic ethnography. The ethnographic methods encompass just over two years of fieldwork with participating observations of the five participants’ computing activities at home, at school and elsewhere. The participants, one boy and two girls from the Blue (Anemone) School and two girls from the White (Anemone) School, were chosen to reflect a broad spectrum in terms of sociocultural and socioeconomic background. The study shows the existence of a both broad and deep variation in the way digital literacy features in the participants’ one-to-one computing. These variations are associated with experience in relation to the home, the living environment, place, personal qualities and school. The more varied computer usage of the Blue School participants is connected with the interests they developed in their homes and living environments and in the computing practices undertaken in school. Their more varied usage of the computer is reflected in their broader digital literacy repertoires and their greater number and variety of digital literacy abilities. The Blue School participants’ text production is more multifaceted, covers a wider range of subjects and displays a broader palette of semiotic resources. It also combines more text types and the texts are generally longer than those of the White School participants. The Blue School girls have developed a text culture that is close to that of the school. In their case, there is clear linkage between school-initiated and self-initiated computing activities, while other participants do not have the same opportunities to link and integrate self-initiated computing activities into the school context. It also becomes clear that the Blue School girls can relate and adapt their texts to different communicative practices and recipients. In addition, the study shows that the Blue School girls have some degree of scope in their school practice as a result of incorporating into it certain communicative practices that they have developed in nonschool contexts. Quite contrary to the hopes expressed that one-to-one computing would reduce digital inequality, it has increased between these participants. Whether the same or similar results apply in a larger perspective, on a more structural level, is a question that this study cannot answer. It can only draw attention to the need to investigate the matter. The study shows in a variety of ways that the White School participants do not have the same opportunity to develop their digital literacy as the Blue School participants. In an equivalence perspective, schools have a compensational task to perform. It is abundantly clear from the study that investing in one-to-one projects is not enough to combat digital inequality and achieve the digitisation goals established for school education. Alongside their investments in technology, schools need to develop a didactic that legitimises and compensates for the different circumstances of different pupils. The compensational role of schools in this connection is important not only for the present participants but also for the community at large, in that it can help to secure a cohesive, open and democratic society.

FEM based Virtual Prototyping and Design of Third Harmonic Excitation System for Low Voltage Brushless Alternators

Salient pole brushless alternators coupled to IC engines are extensively used as stand-by power supply units for meeting in- dustrial power demands. Design of such generators demands high power to weight ratio, high e ciency and low cost per KVA out- put. Moreover, the performance characteristics of such machines like voltage regulation and short circuit ratio (SCR) are critical when these machines are put into parallel operation and alterna- tors for critical applications like defence and aerospace demand very low harmonic content in the output voltage. While designing such alternators, accurate prediction of machine characteristics, including total harmonic distortion (THD) is essential to mini- mize development cost and time. Total harmonic distortion in the output voltage of alternators should be as low as possible especially when powering very sophis- ticated and critical applications. The output voltage waveform of a practical AC generator is replica of the space distribution of the ux density in the air gap and several factors such as shape of the rotor pole face, core saturation, slotting and style of coil disposition make the realization of a sinusoidal air gap ux wave impossible. These ux harmonics introduce undesirable e ects on the alternator performance like high neutral current due to triplen harmonics, voltage distortion, noise, vibration, excessive heating and also extra losses resulting in poor e ciency, which in turn necessitate de-rating of the machine especially when connected to non-linear loads. As an important control unit of brushless alternator, the excitation system and its dynamic performance has a direct impact on alternator's stability and reliability. The thesis explores design and implementation of an excitation i system utilizing third harmonic ux in the air gap of brushless al- ternators, using an additional auxiliary winding, wound for 1=3rd pole pitch, embedded into the stator slots and electrically iso- lated from the main winding. In the third harmonic excitation system, the combined e ect of two auxiliary windings, one with 2=3rd pitch and another third harmonic winding with 1=3rd pitch, are used to ensure good voltage regulation without an electronic automatic voltage regulator (AVR) and also reduces the total harmonic content in the output voltage, cost e ectively. The design of the third harmonic winding by analytic methods demands accurate calculation of third harmonic ux density in the air gap of the machine. However, precise estimation of the amplitude of third harmonic ux in the air gap of a machine by conventional design procedures is di cult due to complex geome- try of the machine and non-linear characteristics of the magnetic materials. As such, prediction of the eld parameters by conven- tional design methods is unreliable and hence virtual prototyping of the machine is done to enable accurate design of the third har- monic excitation system. In the design and development cycle of electrical machines, it is recognized that the use of analytical and experimental methods followed by expensive and in exible prototyping is time consum- ing and no longer cost e ective. Due to advancements in com- putational capabilities over recent years, nite element method (FEM) based virtual prototyping has become an attractive al- ternative to well established semi-analytical and empirical design methods as well as to the still popular trial and error approach followed by the costly and time consuming prototyping. Hence, by virtually prototyping the alternator using FEM, the important performance characteristics of the machine are predicted. Design of third harmonic excitation system is done with the help of results obtained from virtual prototype of the machine. Third harmonic excitation (THE) system is implemented in a 45 KVA ii experimental machine and experiments are conducted to validate the simulation results. Simulation and experimental results show that by utilizing third harmonic ux in the air gap of the ma- chine for excitation purposes during loaded conditions, triplen harmonic content in the output phase voltage is signi cantly re- duced. The prototype machine with third harmonic excitation system designed and developed based on FEM analysis proved to be economical due to its simplicity and has the added advan- tage of reduced harmonics in the output phase voltage.

Compact Representations for Fast Nonrigid Registration of Medical Images

We develop efficient techniques for the non-rigid registration of medical images by using representations that adapt to the anatomy found in such images. Images of anatomical structures typically have uniform intensity interiors and smooth boundaries. We create methods to represent such regions compactly using tetrahedra. Unlike voxel-based representations, tetrahedra can accurately describe the expected smooth surfaces of medical objects. Furthermore, the interior of such objects can be represented using a small number of tetrahedra. Rather than describing a medical object using tens of thousands of voxels, our representations generally contain only a few thousand elements. Tetrahedra facilitate the creation of efficient non-rigid registration algorithms based on finite element methods (FEM). We create a fast, FEM-based method to non-rigidly register segmented anatomical structures from two subjects. Using our compact tetrahedral representations, this method generally requires less than one minute of processing time on a desktop PC. We also create a novel method for the non-rigid registration of gray scale images. To facilitate a fast method, we create a tetrahedral representation of a displacement field that automatically adapts to both the anatomy in an image and to the displacement field. The resulting algorithm has a computational cost that is dominated by the number of nodes in the mesh (about 10,000), rather than the number of voxels in an image (nearly 10,000,000). For many non-rigid registration problems, we can find a transformation from one image to another in five minutes. This speed is important as it allows use of the algorithm during surgery. We apply our algorithms to find correlations between the shape of anatomical structures and the presence of schizophrenia. We show that a study based on our representations outperforms studies based on other representations. We also use the results of our non-rigid registration algorithm as the basis of a segmentation algorithm. That algorithm also outperforms other methods in our tests, producing smoother segmentations and more accurately reproducing manual segmentations.

G+: Enhanced Traffic Grooming in WDM Mesh Networks using Lighttours

In this article, a new technique for grooming low-speed traffic demands into high-speed optical routes is proposed. This enhancement allows a transparent wavelength-routing switch (WRS) to aggregate traffic en route over existing optical routes without incurring expensive optical-electrical-optical (OEO) conversions. This implies that: a) an optical route may be considered as having more than one ingress node (all inline) and, b) traffic demands can partially use optical routes to reach their destination. The proposed optical routes are named "lighttours" since the traffic originating from different sources can be forwarded together in a single optical route, i.e., as taking a "tour" over different sources towards the same destination. The possibility of creating lighttours is the consequence of a novel WRS architecture proposed in this article, named "enhanced grooming" (G+). The ability to groom more traffic in the middle of a lighttour is achieved with the support of a simple optical device named lambda-monitor (previously introduced in the RingO project). In this article, we present the new WRS architecture and its advantages. To compare the advantages of lighttours with respect to classical lightpaths, an integer linear programming (ILP) model is proposed for the well-known multilayer problem: traffic grooming, routing and wavelength assignment The ILP model may be used for several objectives. However, this article focuses on two objectives: maximizing the network throughput, and minimizing the number of optical-electro-optical conversions used. Experiments show that G+ can route all the traffic using only half of the total OEO conversions needed by classical grooming. An heuristic is also proposed, aiming at achieving near optimal results in polynomial time

Matemàtiques a l'educació infantil : fem comparacions.'Matemáticas en Educación Infantil : hacemos comparaciones'.

Se expone una actividad de matemáticas realizada por la escuela de Sineu, Mallorca. Se trata de medir el campanario del pueblo para obtener información real y adaptar las medidas a las necesidades de aprendizaje de los niños des de una visión global tomada de la vida cotidiana. Finalmente, se llevan a cabo una serie de actividades relacionadas con las medidas.

I què fem a casa nostra? Reflexions i experiències sobre esport i immigració.

Se muestran fotografías. Contiene anexo al final del artículo. Resumen tomado del autor

CEIP Santa Gertrudis : aquesta escola la fem tots. 'CEIP Santa Gertrudis : esta escuela la hacemos todos'.

Resumen tomado del autor

Programa d'ajut a la docència universitària : fem camí cap a Europa. 'Programa de ayuda a la docencia universitaria : hacemos camino hacia Europa'.

Se presenta un programa cuyo objetivo es la mejora de la calidad de la docencia universitaria y facilitar su adaptación al nuevo espacio europeo de educación superior. Para ello se presentan cuatro cursos dirigidos al profesorado universitario para adaptarse a los futuros planes de estudio.

Fem quart en dos cursos? : adaptació curricular duta a terme per l'IES Celestí Ballera de Granollers. '¿Hacemos cuarto en dos cursos? : adaptación curricular llevada a cabo por el IES Celestí Ballera de Granollers'.

Teniendo en cuenta que hay alumnado que al acabar tercero de secundaria no está preparado para alcanzar los objetivos finales de etapa, pero sí que es suficientemente maduro para darse cuenta de su realidad y tomar una decisión juntamente con su familia, esta escuela realizó una adaptación curricular para estos estudiantes. Los autores exponen la experiencia de adaptación a la diversidad en la ESO, mencionando aspectos como los recursos que disponían, el marco legal, y como se organiza una adaptación.