Geochemistry of abyssal peridotites from ODP Hole 209-1274A

Aqueous dihydrogen (H2,aq) is produced in copious amounts when seawater interacts with peridotite and H2O oxidizes ferrous iron in olivine to ferric iron in secondary magnetite and serpentine. Poorly understood in this process is the partitioning of iron and its oxidation state in serpentine, although both impose an important control on dihydrogen production. We present results of detailed petrographic, mineral chemical, magnetic and Mößbauer analyses of partially to fully serpentinized peridotites from the Ocean Drilling Program (ODP) Leg 209, Mid-Atlantic Ridge (MAR) 15°N area. These results are used to constrain the fate of iron during serpentinization and are compared with phase equilibria considerations and peridotite-seawater reaction path models. In samples from Hole 1274A, mesh-rims reveal a distinct in-to-out zoning from brucite at the interface with primary olivine, followed by a zone of serpentine + brucite ± magnetite and finally serpentine + magnetite in the outermost mesh-rim. The compositions of coexisting serpentine (Mg# 95) and brucite (Mg# 80) vary little throughout the core. About 30-50% of the iron in serpentine/brucite mesh-rims is trivalent, irrespective of subbasement depth and protolith (harzburgite versus dunite). Model calculations suggest that both partitioning and oxidation state of iron are very sensitive to temperature and water-to-rock ratio during serpentinization. At temperatures above 330 °C the dissolution of olivine and coeval formation of serpentine, magnetite and dihydrogen depends on the availability of an external silica source. At these temperatures the extent of olivine serpentinization is insufficient to produce much hydrogen, hence conditions are not reducing enough to form awaruite. At T < 330 °C, hydrogen generation is facilitated by the formation of brucite, as dissolution of olivine to form serpentine, magnetite and brucite requires no addition of silica. The model calculations suggest that the iron distribution observed in serpentine and brucite is consistent with formation temperatures ranging from <150 to 250 °C and bulk water-to-rock ratios between 0.1 and 5. These conditions coincide with peak hydrogen fugacities during serpentinization and are conducive to awaruite formation during main stage serpentinization. The development of the common brucite rims around olivine is either due to an arrested reaction olivine -> brucite -> serpentine + brucite, or reflects metastable olivine-brucite equilibria developing in the strong gradient in silica activity between orthopyroxene (talc-serpentine) and olivine (serpentine-brucite).

Carbon sources in the North Sea evaluated by means of carbon isotope tracers

A multitracer approach is applied to assess the impact of boundary fluxes (e.g., benthic input from sedi- ments or lateral inputs from the coastline) on the acid-base buffering capacity, and overall biogeochemistry, of the North Sea. Analyses of both basin-wide observations in the North Sea and transects through tidal basins at the North-Frisian coastline, reveal that surface distributions of the d13C signature of dissolved inorganic carbon (DIC) are predominantly controlled by a balance between biological production and respiration. In particular, variability in metabolic DIC throughout stations in the well-mixed southern North Sea indi- cates the presence of an external carbon source, which is traced to the European continental coastline using naturally occurring radium isotopes (224Ra and 228Ra). 228Ra is also shown to be a highly effective tracer of North Sea total alkalinity (AT) compared to the more conventional use of salinity. Coastal inputs of meta- bolic DIC and AT are calculated on a basin-wide scale, and ratios of these inputs suggest denitrification as a primary metabolic pathway for their formation. The AT input paralleling the metabolic DIC release prevents a significant decline in pH as compared to aerobic (i.e., unbuffered) release of metabolic DIC. Finally, long- term pH trends mimic those of riverine nitrate loading, highlighting the importance of coastal AT production via denitrification in regulating pH in the southern North Sea.

Communication Project for development: 25 years of experience in andean rural communities in Ecuador

IThis paper analyses communication for development from a new perspective: the project in its broader and most genuine sense, as an instrument for changing current reality. This is examined from both its theoretical and practical implementation side. Knowledge/action binomial as a two-way relationship is one of the basis of the project cycle. It allows for better knowing the reality that the project itself (what constitutes the action) is intended to improve. Besides that, this knowledge/action binomial also offers new knowledge that nourishes future actions (projects). From a project based communication perspective, the project nourishes the knowledge, which leads to a transformative action. Reflecting about the action is a new knowledge source whose adoption by the community is eased by the communication process. Radio Mensaje project among the indigenous Andean communities in Cayambe (Ecuador) was born and also developed within this approach, supporting the collaborative participation in project management. This leads to the development process which is described in this case study.

Modelo de alta capacidade de inovação para PMEs

Sob as condições presentes de competitividade global, rápido avanço tecnológico e escassez de recursos, a inovação tornou-se uma das abordagens estratégicas mais importantes que uma organização pode explorar. Nesse contexto, a capacidade de inovação da empresa enquanto capacidade de engajar-se na introdução de novos processos, produtos ou ideias na empresa, é reconhecida como uma das principais fontes de crescimento sustentável, efetividade e até mesmo sobrevivência para as organizações. No entanto, apenas algumas empresas compreenderam na prática o que é necessário para inovar com sucesso e a maioria enxerga a inovação como um grande desafio. A realidade não é diferente no caso das empresas brasileiras e em particular das Pequenas e Médias Empresas (PMEs). Estudos indicam que o grupo das PMEs particularmente demonstra em geral um déficit ainda maior na capacidade de inovação. Em resposta ao desafio de inovar, uma ampla literatura emergiu sobre vários aspectos da inovação. Porém, ainda considere-se que há poucos resultados conclusivos ou modelos compreensíveis na pesquisa sobre inovação haja vista a complexidade do tema que trata de um fenômeno multifacetado impulsionado por inúmeros fatores. Além disso, identifica-se um hiato entre o que é conhecido pela literatura geral sobre inovação e a literatura sobre inovação nas PMEs. Tendo em vista a relevância da capacidade de inovação e o lento avanço do seu entendimento no contexto das empresas de pequeno e médio porte cujas dificuldades para inovar ainda podem ser observadas, o presente estudo se propôs identificar os determinantes da capacidade de inovação das PMEs a fim de construir um modelo de alta capacidade de inovação para esse grupo de empresas. O objetivo estabelecido foi abordado por meio de método quantitativo o qual envolveu a aplicação da análise de regressão logística binária para analisar, sob a perspectiva das PMEs, os 15 determinantes da capacidade de inovação identificados na revisão da literatura. Para adotar a técnica de análise de regressão logística, foi realizada a transformação da variável dependente categórica em binária, sendo grupo 0 denominado capacidade de inovação sem destaque e grupo 1 definido como capacidade de inovação alta. Em seguida procedeu-se com a divisão da amostra total em duas subamostras sendo uma para análise contendo 60% das empresas e a outra para validação (holdout) com os 40% dos casos restantes. A adequação geral do modelo foi avaliada por meio das medidas pseudo R2 (McFadden), chi-quadrado (Hosmer e Lemeshow) e da taxa de sucesso (matriz de classificação). Feita essa avaliação e confirmada a adequação do fit geral do modelo, foram analisados os coeficientes das variáveis incluídas no modelo final quanto ao nível de significância, direção e magnitude. Por fim, prosseguiu-se com a validação do modelo logístico final por meio da análise da taxa de sucesso da amostra de validação. Por meio da técnica de análise de regressão logística, verificou-se que 4 variáveis apresentaram correlação positiva e significativa com a capacidade de inovação das PMEs e que, portanto diferenciam as empresas com capacidade de inovação alta das empresas com capacidade de inovação sem destaque. Com base nessa descoberta, foi criado o modelo final de alta capacidade de inovação para as PMEs composto pelos 4 determinantes: base de conhecimento externo (externo), capacidade de gestão de projetos (interno), base de conhecimento interno (interno) e estratégia (interno).

Estratégia operacional de sistema formado por reator não compartimentado com setores com aeração/sem aeração precedido por reator anaeróbio

A opção por sistemas biológicos prevalece para o tratamento do esgoto sanitário. Nas décadas recentes, sistemas que possuem regiões e/ou zonas anaeróbia, anóxica e aeróbia têm-se mostrado como alternativas atraentes para remoção simultânea de matéria orgânica, nitrogênio e fósforo. No entanto, os aspectos operacionais ainda merecem ser objeto de estudo para alcançar desempenho otimizado. Nesse cenário, com intuito de comparar alternativas para a operação das unidades de tratamento de esgoto, o presente trabalho propôs-se a estudar estratégias operacionais associadas ao monitoramento, em tempo real, sem adição de fonte externa de carbono, para um reator aerado não compartimentado com crescimento suspenso e fluxo contínuo precedido de reator anaeróbio. O sistema experimental, em escala de bancada, era constituído de um reator anaeróbio, com volume útil de 43,54 L, e reator aerado, com volume útil de 68,07 L; sendo que este era formado por sete setores, em série, sem separação física. O estudo foi dividido em duas etapas: I - estudo da variação dos volumes da região aerada e da não aerada; II - estudo da aeração intermitente com ciclo de aeração/agitação pré-fixado e controlado em tempo real por sistema informatizado. Em todas as Etapas do estudo ocorreu elevada remoção de DBO e conversão de NTK para nitrato, contudo não se conseguiu obter desnitrificação em nível desejado. O uso de reatores com setores sequenciais sem divisão física (Etapa I) dificultou a obtenção de regiões distintas predominantemente anóxica e aeróbia, comprometendo a remoção de nitrogênio (principalmente a desnitrificação). A maior eficiência média de remoção de nitrogênio alcançada no reator aerado foi de 35,6% (Etapa II), quando o reator era operado com aeração intermitente sendo o ciclo de aeração/agitação controlado em tempo real. A estratégia de operação com aeração intermitente, estudada na Etapa II, favoreceu a remoção de nitrogênio. A aeração intermitente demonstrou ser uma opção promissora comparada à aeração contínua em setores específicos do reator. O controle automatizado e informatizado em tempo real dos ciclos de aeração/agitação pode ser aplicado no aperfeiçoamento da operação dos sistemas de tratamento de esgoto sanitário.

R&D, Spillovers, Innovation Systems and the Genesis of Regional Growth in Europe. Bruges European Economic Research (BEER) Papers 5/October 2006

Research on the impact of innovation on regional economic performance in Europe has fundamentally followed three approaches: a) the analysis of the link between investment in R&D, patents, and economic growth; b) the study of the existence and efficiency of regional innovation systems; and c) the examination of geographical diffusion of regional knowledge spillovers. These complementary approaches have, however, rarely been combined. Important operational and methodological barriers have thwarted any potential cross-fertilization. In this paper, we try to fill this gap in the literature by combining in one model R&D, spillovers, and innovation systems approaches. A multiple regression analysis is conducted for all regions of the EU-25, including measures of R&D investment, proxies for regional innovation systems, and knowledge and socio-economic spillovers. This approach allows us to discriminate between the influence of internal factors and external knowledge and institutional flows on regional economic growth. The empirical results highlight how the interaction between local and external research with local and external socioeconomic and institutional conditions determines the potential of every region in order to maximise its innovation capacity. They also indicate the importance of proximity for the transmission of economically productive knowledge, as spillovers show strong distance decay effects. In the EU-25 context, only the innovative efforts pursued within a 180 minute travel radius have a positive and significant impact on regional growth performance.

A call to arms at the end of history: a discourse-historical analysis of George W. Bush's declaration of war on terror

In this article we take a discourse-historical approach to illustrate the significance of George W Bush's (2001) declaration of a 'war on terror'. We present four exemplary 'call to arms' speeches by Pope Urban 11 (1095), Queen Elizabeth I (1588), Adolf Hitler (1938) and George W Bush (2001) to exemplify the structure, function, and historical significance of such texts in western societies over the last millennium. We identify four generic features that have endured in such texts throughout this period: (i) an appeal to a legitimate power source that is external to the orator, and which is presented as inherently good; (ii) an appeal to the historical importance of the culture in which the discourse is situated; (iii) the construction of a thoroughly evil Other; and (iv) an appeal for unification behind the legitimating external power source. We argue further that such texts typically appear in historical contexts characterized by deep crises in political legitimacy.

Organizing the innovation process:complementarities in innovation networking

This paper contributes to the developing literature on complementarities in organizational design. We test for the existence of complementarities in the use of external networking between stages of the innovation process in a sample of UK and German manufacturing plants. Our evidence suggests some differences between the UK and Germany in terms of the optimal combination of innovation activities in which to implement external networking. Broadly, there is more evidence of complementarities in the case of Germany, with the exception of the product engineering stage. By contrast, the UK exhibits generally strong evidence of substitutability in external networking in different stages, except between the identification of new products and product design and development stages. These findings suggest that previous studies indicating strong complementarity between internal and external knowledge sources have provided only part of the picture of the strategic dilemmas facing firms.

The innovation decision:an economic analysis

Studies of the determinants and effects of innovation commonly make an assumption about the way in which firms make the decision to innovate, but rarely test this assumption. Using a panel of Irish manufacturing firms we test the performance of two alternative models of the innovation decision, and find that a two-stage model (the firm decides whether to innovate, then whether to perform product only, process only or both) outperforms a one-stage, simultaneous model. We also find that external knowledge sourcing affects the innovation decision and the type of innovation undertaken in a way not previously recognised in the literature. © 2007 Elsevier Ltd. All rights reserved.

The application of expert systems techniques in the design of durable concrete

This thesis describes work done exploring the application of expert system techniques to the domain of designing durable concrete. The nature of concrete durability design is described and some problems from the domain are discussed. Some related work on expert systems in concrete durability are described. Various implementation languages are considered - PROLOG and OPS5, and rejected in favour of a shell - CRYSTAL3 (later CRYSTAL4). Criteria for useful expert system shells in the domain are discussed. CRYSTAL4 is evaluated in the light of these criteria. Modules in various sub-domains (mix-design, sulphate attack, steel-corrosion and alkali aggregate reaction) are developed and organised under a BLACKBOARD system (called DEX). Extensions to the CRYSTAL4 modules are considered for different knowledge representations. These include LOTUS123 spreadsheets implementing models incorporating some of the mathematical knowledge in the domain. Design databases are used to represent tabular design knowledge. Hypertext representations of the original building standards texts are proposed as a tool for providing a well structured and extensive justification/help facility. A standardised approach to module development is proposed using hypertext development as a structured basis for expert systems development. Some areas of deficient domain knowledge are highlighted particularly in the use of data from mathematical models and in gaps and inconsistencies in the original knowledge source Digests.

Oxygenation for fish farms

This thesis provides a detailed study of methods for dissolving oxygen in water to reduce water requirements for fish farming. The principal sources of oxygen are air or pure oxygen gas. Aeration methods have the distinct advantage of the universal availability of air. However, the effectiveness of such methods is diminished by the presence of nitrogen in the air and, in general, the maintenance of dissolved oxygen levels above 70% saturation is likely to result in excessive power requirements. Pure oxygen has five times the solubility of oxygen in air and it is possible, therefore to achieve much higher transfer rates. However, oxygen is expensive and its economic use is essential: it is important, therefore, to dissolve a high proportion of the oxygen. Four distinct oxygenation systems were evaluated by the author. A detailed analysis of a column oxygenator is given first. The column was designed so that the oxygen bubbles generated are trapped within the column until dissolved. In seawater, much smaller bubbles are formed and this led to the development of a jet oxygenator which disperses gas rubbles within the rearing tank. Both the above systems were designed primarily for oxygenating recycled tank water. For oxygenating a primary water source, a U -tube device was evaluated. Lastly, the possibility of supporting fish stocks without any external power source, other than a pressured supply of oxygen from a liquid oxygen store, was considered. Experience of running commercial-scale oxygenation systems in high-intensity fish farms has made it possible to estimate operating costs of both aeration and oxygenation systems. The significance of these costs is discussed.

Coherence and anticoherence resonance in high-concentration erbium-doped fiber laser

We report an experimental study of low-frequency (~10 kHz) self-pulsing of the output intensity in a high- concentration erbium-doped fiber laser. We suggest that the fast intensity fluctuations caused by multimode and polarization instabilities play the role of an external noise source, leading to low-frequency auto-oscillations through a coherence resonance scenario.

The innovation value chain in new technology-based firms:evidence from the U.K.

Innovation is central to the survival and growth of firms, and ultimately to the health of the economies of which they are part. A clear understanding both of the processes by which firms perform innovation and the benefits which flow from innovation in terms of productivity and growth is therefore essential. This paper demonstrates the use of a conceptual framework and modeling tool, the innovation value chain (IVC), and shows how the IVC approach helps to highlight strengths and weaknesses in the innovation performance of a key group of firms-new technology-based firms. The value of the IVC is demonstrated in showing the key interrelationships in the whole process of innovation from sourcing knowledge through product and process innovation to performance in terms of the growth and productivity outcomes of different types of innovation. The use of the IVC highlights key complementarities, such as that between internal R&D, external R&D, and other external sources of knowledge. Other important relationships are also highlighted. Skill resources matter throughout the IVC, being positively associated with external knowledge linkages and innovation success, and also having a direct influence on growth independent of the effect on innovation. A key benefit of the IVC approach is therefore its ability to highlight the roles of different factors at various stages of the knowledge-innovation-performance nexus, and to show their indirect as well as direct impact. This in turn permits both managerial and policy implications to be drawn. © 2012 Product Development & Management Association.

The innovation value chain and export performance:a study of Taiwanese manufacturing industries

This thesis involves the secondary data of 1806 innovative manufacturing firms derived from the database of 2nd Taiwanese Innovation Survey. Three topics are researched. The first topic investigates the innovation value chain (IVC) in Taiwanese manufacturing firms. Previous IVC studies are all done in developed countries such as UK, Ireland, Northern Ireland and Switzerland, and it leaves the gap of those non-developed countries. The result shows the overall knowledge sourcing pattern of Taiwanese manufacturing firms presenting a complementary relationship which is consistent to the previous IVC studies. The main innovation input is still derived from internal R&D which suggests more utilisation of external knowledge may boost innovation outcome. Product innovation does enhance firm growth while process innovation reduces a firm’s productivity. The second topic uses the lens of IVC to investigate the difference of the innovation process from knowledge linkages to value added between high-tech and low- tech sectors. The findings indicate (1) there are significant differences in the IVC between high- and low-tech sectors, however these are defined; (2) how you define ‘sector’ matters i.e. the nature of the high-tech and low-tech differences varies depending on whether the technology definition is carried out at the industry or firm level; and (3) the high uncertainty of innovation cause the difficulty to predict firm performance especially for those firms with high intensity of innovation. The third topic investigates the innovation-exporting relationship and explores the determinants of export performance. Product innovation enhances export performance once a firm enters international markets while process innovation affects negatively on a firm’s likelihood of being an exporter. Furthermore, IP protection is found to affect directly export performance positively.

Diversifying into technical clothing manufacture:a situated learning theory perspective

An organisation’s ability to internalise external knowledge and learn from various sources in undertaking new product development and/or entering a new market is crucial to its competitive performance. Nevertheless, little attention has been paid to how growth-oriented small firms identify and exploit entrepreneurial opportunities, i.e. take entrepreneurial action, related to such methods of development, in a mature, contracting industry. The latter is particularly relevant to recent discussion and debate in academic and policy-making circles concerning the salvage of the clothing manufacture industry in developed industrialised countries, by intensifying efforts relating to diversification into high value manufacturing sectors. This paper, based on an instrumental case-firm, demonstrates analytically how learning as entrepreneurial action relating to diversifying into /technical clothing – i.e. a high value manufacturing/innovatory sector - takes place, drawing on situated learning theory. It is argued that learning relating to such entrepreneurial action is dynamic in nature and is founded on specific organising principles that foster both inter- and intracommunal learning.