832 resultados para Estudo de viabilidade


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Given the current energy crisis experienced in our country with the lack of rain in some areas, the energy distributors were forced to resort to thermal power plants to complement their energy production; raising the cost of electricity generation, they have been forced to repass this value to the customers through the Tariff Flags. Concerned about a substantial increase in their electric bill, some consumers were forced to look for alternatives so that their results are not affected. The use of diesel generation at peak hours is a relatively simple and inexpensive alternative that has been widely used for several industrial, commercial and service customers. In this present work, we conducted a feasibility study of the use of diesel generators at peak hours in a medium-sized hospital, calculating the depreciation period for the investment through savings in electricity bills

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The automobile industry has a growing importance in the Brazilian economic environment. The industry moves a huge chain that encompasses manufacturers, suppliers of raw materials, auto parts dealers, gas stations, insurance companies, repair shops, tire stores, media companies, advertising agencies, among others. Because of this importance in the current economic environment in Brazil, the federal government, through Law No. 12715 of 17 December 2012 established a Program for the Promotion of Innovation and Densification in the Productive Chain of Motor Vehicles called INOVAR-AUTO in order to support technological development, innovation, safety, environmental protection, energy efficiency and quality of cars, trucks, buses and auto parts. The specific purpose of this study, a simulation for discussion of the viability of the program implementation using the Monte Carlo Simulation combined with the Cash-Flow-at-Risk was performed. To this end, an exploratory and documentary literature on the subject was held as well as a case study in a automobile company of Japanese origin

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Para avaliar os benefícios da comunicação rápida ao clínico do diagnóstico de vírus respiratórios, foi analisado a viabilidade econômica de 2 testes, com o tempo de entrega de resultado em 2 horas para teste rápido e 48 horas para Biologia Molecular. As amostras coletadas foram processadas utilizando técnicas convencionais e os testes disponíveis no mercado local. Foram escolhidos dois testes rápidos pelo método de imunocromatografia para quatro parâmetros analíticos: Influenza A, Influenza H1N1, Influenza B e Vírus Sincicial Respiratório (RSV) e em Biologia Molecular um teste de RT-PCR multiplex com 25 patógenos entre vírus e bactérias. O tipo de amostra utilizada foi swab e lavado de nasofaringe. A população escolhida para o estudo foi paciente adulto, em tratamento de câncer, que necessita de uma resposta rápida já que a maioria se encontra com comprometimento do sistema imune por doença ou por tratamento. O estudo foi transversal, realizado entre os anos de 2012 e 2013, para avaliar a viabilidade econômica da introdução de testes de diagnóstico da infecção respiratória aguda de etiologia viral a partir de amostras de nasofaringe em pacientes com câncer atendidos no Centro de Atendimento de Oncologia Intercorrência (CAIO ), do Instituto do Câncer do Estado de São Paulo (ICESP), hospital público que atende exclusivamente Sistema Único de Saúde (SUS) e Hospital A.C. Camargo, que atende tanto a pacientes do SUS como da rede privada. O estudo incluiu 152 pacientes em tratamento para qualquer tipo de câncer, predominantemente do sexo feminino (81 mulheres e 70 homens) com idades entre 18-86 anos. Para participar do estudo o paciente era consultado e o critério para escolha do paciente foi ser portador de câncer, com história de febre (ainda que referida) acompanhada de tosse ou dor de garganta, tosse e sintomas respiratórios agudos, atendidos por protocolo padronizado que inclui avaliação na admissão, seguimento e manejo antimicrobiano. Para a avaliação econômica os pacientes foram classificados de acordo com o estado geral de saúde, se apresentavam bom estado de estado de saúde poderiam receber alta e faziam uso da medicação em casa evitando 5 dias de internação se recebessem algum resultado para Influenza ou RSV, no entanto os pacientes que apresentavam outro vírus, resultado negativo ou o estado geral era ruim permaneciam internados por 7 dias em observação e cuidados com medicação adequada. Foram realizadas análises econômicas em dois âmbitos: o sistema de saúde publico e o privado considerando o fator diminuição de dias de internação. A analise de Custo-benefício foi eficiente no Sistema privado mas inadequada para o SUS assim como, qualquer outra medida monetária já que os valores de reembolso do SUS estão defasados do custo de qualquer internação. A análise de Custo-efetividade que olha para outros fatores além do monetário foi efetiva nos dois sistemas que enfrentam falta de leitos além da condição de saúde do paciente de evitar a ingestão desnecessária de antibióticos, evitar os gastos do acompanhante, perda de dias de trabalho e estudo. Não houve correspondência de resultados dos testes rápidos com o multiplex de Biologia Molecular

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The use of energy from renewable sources is increasingly demanded by society, especially aeolian - whose raw material is wind. Investments in wind power have become significant in Brazil with emphasis on the Northeast and in particular the Rio Grande do Norte state. According to the Empresa de Pesquisa Energética (Energy Research Company) (2012 ) , investments in the state grew significantly since 2002 with a total accumulated power, by 2013, of approximately 3,400 MW . Even with the early experiences of exploitation of wind energy in 2002, it is still considered new and requires further study referring to the likely changes in the environment and society. In this case, it is of growing and urgent importance to deeply study the wind still in the survey phase of the project, ie , at the beginning of decision making on the most feasible to implement these parks site. Given the above, the question is: from a technical and environmental analysis, how to identify viable areas to install Aeolian parks, taking into account the factors of the environmental dynamics that are relevant to minimize the negative results to the environment and the society? Thus, this study conducted a study on technical and environmental feasibility, proposing a methodology of exploration of feasible wind farms in coastal areas. The study area was a fragment of the northern coast of Rio Grande do Norte and its natural landscape units were identified through the environmental characterization of the area, as well as it was elaborated the map of the land cover, restriction homes and urban areas and Permanent Preservation Areas - PPAs. The environmental fragility was subdivided in the fragility of the natural dynamic, mapped through relief, soils and geology of natural units, and the fragility of the ecosystem, originated by the land cover map. In addition to these maps, it was generated the wind resource for an area from a height of 50 and 100 meters. The intersection between the fragility maps, PPAs and Restriction of homes superimposed on maps of wind potential, provided the map of feasibility of Aeolian parks, resulting in the most favorable areas for its facilities in a technical and environmental point of view. From this study, the entrepreneur can evaluate whether or not to proceed with the studies in this area and especially decrease potential conflicts with society.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O referido projeto tem como objetivo principal a avaliação das capacidades técnicas, económicas e ambientais da ilha do Príncipe (República democrática de S. Tomé e Príncipe) para possibilitar a instalação de uma central piloto (500 kW) de produção de energia elétrica a partir de biomassa captada proveniente de la floresta (resíduos florestais) e campos agrícolas(resíduos agrícolas) com intuito de aumentar a potência total instalada na ilha. S. Tomé e Príncipe é um país subdesenvolvido e partilha de um dos maiores problemas dos países dessa categoria, a precária produção e distribuição da energia elétrica a população. Em S. Tomé e Príncipe estes problemas são derivados a fraca potência instalada e dependência de combustíveis fósseis. Especificamente na ilha do Príncipe, a situação é ainda mais complicada, situação prendesse com o facto de que o transporte de combustível da Ilha de S. Tomé para a ilha do Príncipe não se processar num regime contínuo, devido ao aumento do consumo pela população da Ilha do Príncipe conjugado com a fraca potência instalada e a falta de condições ideais de armazenamento de combustível, o que origina muitas falhas na distribuição de eletricidade ou uma racionalidade na sua distribuição. A racionalidade de distribuição de eletricidade na ilha do Príncipe segue o princípio de fornecimento em momentos de maior necessidade, isto é: horários em que as famílias se encontram juntas em suas casas (18 as 24h), períodos de maior produtividade da ilha (8 as 12h), com interregnos de várias horas na distribuição. Este princípio não respeita instituições como os hospitais onde a necessidade de energia elétrica permanente é uma necessidade. Outra motivação para a elaboração deste projeto é o facto de que a ilha do Príncipe a partir de ano 2012 passou a ser uma reserva da Biosfera da UNESCO. Este facto obrigou obviamente a ilha do Príncipe a ter uma maior preocupação com a sustentabilidade ambiental. Perante essas necessidades, surgiu a necessidade de criação de um projeto que tentasse cobrir as lacunas elétricas da Ilha do Príncipe. O projeto é ambicioso, não só para S. Tomé e Príncipe, mas também para todos os países da região e principalmente aqueles com grande potencialidade em biomassa florestal e agrícola.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Cells the solid oxide fuel are systems capable to directly convert energy of a chemical reaction into electric energy in clean, quiet way and if its components in the solid state differentiate of excessively the techniques for having all. Its more common geometric configurations are: the tubular one and to glide. Geometry to glide beyond the usual components (anode, cathode and electrolyte) needs interconnect and sealant. E the search for materials adjusted for these components is currently the biggest challenge found for the production of the cells. The sealants need to present chemical stability in high temperatures, to provoke electric isolation, to have coefficient of compatible thermal expansion with the excessively component ones. For presenting these characteristics the glass-ceramics materials are recommended for the application. In this work the study of the partial substitution of the ZrO2 for the Al2O3 in system LZS became it aiming at the formation of system LZAS, this with the addition of natural spodumene with 10, 20 and 30% in mass. The compositions had been casting to a temperature of 1500°C and later quickly cooled with the objective to continue amorphous. Each composition was worn out for attainment of a dust with average diameter of approximately 3μm and characterized by the techniques of DRX, FRX, MEV, dilatometric analysis and particle size analysis. Later the samples had been conformed and treated thermally with temperatures in the interval between 700-1000 °C, with platform of 10 minutes and 1 hour. The analyses for the treated samples had been: dilatometric analysis, DRX, FRX, electrical conductivity and tack. The results point with respect to the viability of the use of system LZAS for use as sealant a time that had presented good results as isolating electric, they had adhered to a material with similar α of the components of a SOFC and had presented steady crystalline phases

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The technique of plasma nitriding by the cathode cage mainly stands out for its ability to produce uniform layers, even on parts with complex geometries. In this study, it was investigated the efficiency of this technique for obtaining duplex surface, when used, simultaneously, to nitriding treatment and thin film deposition at temperatures below 500°C. For this, were used samples of AISI 41 0 Martensitic Stainless Steel and performed plasma treatment, combining nitriding and deposition of thin films of Ti and/or TiN in a plasma atmosphere containing N2-H2. It was used a cathodic cage of titanium pure grade II, cylindrical with 70 mm diameter and 34 mm height. Samples were treated at temperature 420ºC for 2 and 12 hours in different working pressures. Optical Microscopy (OM), Scanning Electron Microscopy (SEM) with micro-analysis by Energy Dispersive Spectroscopy (EDS), X-Ray Diffraction (XRD), Atomic Force Microscopy (AFM) and analysis of Vickers Microhardness were used to investigate coating properties such as homogeneity and surface topography, chemical composition, layer thickness, crystalline phase, roughness and surface microhardness. The results showed there is a direct proportionality between the presence of H2 in plasma atmosphere and the quantity of titanium in surface chemical composition. It was also observed that the plasma treatment at lowpressure is more effective in formation of TiN thin film

Relevância:

100.00% 100.00%

Publicador:

Resumo:

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

Relevância:

100.00% 100.00%

Publicador:

Resumo:

When it comes to oil and gas in Brazil is almost certain that we are referring to activities in deep waters off the coast of Campos, Rio de Janeiro, the main field of action of PETROBRAS and a small number of multinational oil companies . Since the Law 9.478/97 allows, by means of concessions, that other companies other than Petrobras, to explore and produce oil and gas domestically. Soon it moved, then the private companies that want small and medium-sized businesses to invest in such activities, forming a segment of independent producers, as occurs in other countries. In this context, this work aims at making an economic feasibility study, is currently analyzing how this thread and focus on the factors that contribute to its development as well as those that constitute barriers. To this end, we conducted a survey examining some mature fields that are in production in order to capture cost information in the phases of project, operation and abandonment. The work also presents an analysis of the results obtained in the survey, identifying the costs higher. With the results obtained through the study used economic engineering tools such as NPV and IRR, using a variety of design scenarios, to study the economic viability of these fields. In scenario 4 was set a production of 4.0 m³ / d of oil, which is an expected average production for several of these fields, whose minimum value of a barrel of oil, to enable this field, was $ 55.00, this value well below what was being practiced in the market today.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

O trabalho consiste no estudo da viabilidade técnico-econômica da utilização da energia eólica em três localidades no estado do Rio Grande do Sul, Brasil. A pesquisa inicia com uma revisão bibliográfica acerca do assunto, situando o leitor no cenário eólico mundial, brasileiro e riograndense. Seguindo-se a esta, são apresentados os levantamentos desenvolvidos nos municípios de Nova Hartz, São Lourenço do Sul e Tapes. A primeira localidade foi escolhida devido ao projeto do Centro Experimental de Tecnologias Habitacionais Sustentáveis (CETHS) ter sido lá desenvolvido. Neste caso a pesquisa, por constituir-se em um provimento energético consoante à filosofia do projeto, integrou-se nas metas do mesmo. Nesta localidade, foi efetivamente desenvolvido o método de medição da velocidade do vento, aplicando-se a metodologia mundialmente reconhecida do MEASNET, durante um prazo de 11 meses. Nas outras duas localidades, o levantamento dos dados de campo não foi realizado por esta pesquisadora, pois o Instituto de Geociências, dessa Universidade, especificamente, o Centro de Estudos de Geologia Costeira e Oceânica, dispunha à época, de dados de medições da Lagoa dos Patos, ainda não tratados, e tinha interesse na promoção de um estudo técnico acerca dos mesmos. A partir do tratamento estatístico dos dados colhidos e disponibilizados, foi desenvolvido o estudo de viabilidade técnica dos locais com o emprego do Programa Alwin A dissertação conclui com um estudo econômico preliminar, analisando-se o único equipamento nacional em fabricação no momento, o aerogerador E-40/6,44, produzido pela tecnologia da alemã Wobben através de sua subsidiária brasileira, a Empresa Enercon, frente a diferentes alturas, diferentes taxas de financiamento e sob as condições do Programa de Incentivo às Fontes Alternativas (PROINFA) do Ministério das Minas e Energia. Isto resultou em diferentes alternativas de geração de energia elétrica com o uso da energia eólica disponível nas condições locais.Nestes cenários foram destacados os fatores condicionantes que determinaram a viabilidade de um empreendimento nestas localidades, sob os critérios do citado programa.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Este trabalho visa o desenvolvimento de um sistema computacional que implemente os conceitos geoestatísticos para estudo de viabilidade temporal e espacial, de maneira amigável, rápida e consistente, em ambiente Windows e integrado à Web.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Dissertação de mest., Engenharia do Ambiente, Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2012

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Estruturas

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil