Avaliação de ligações tubulares tipo T entre CHS com reforço tipo chapa.

Os perfis tubulares sem costura são utilizados em diversos países, principalmente devido às vantagens associadas à estética a sua elevada resistência à torção, cargas axiais e efeitos combinados. Canadá, Inglaterra, Alemanha e Holanda utilizam de forma veemente estas estruturas e possuem produção contínua e industrializada com alto nível de desenvolvimento tecnológico. O Brasil, porém, se limitava praticamente ao uso destes perfis nas coberturas espaciais. Devido ao aumento da utilização desses tipos de estruturas, fez-se necessário o aprofundamento dos estudos com métodos de análise coerentes para utilização de perfis tubulares, principalmente em relação às ligações, pois são consideradas regiões vulneráveis neste tipo de estrutura. Para atender a necessidade de normatização deste procedimento desenvolveu-se uma norma brasileira específica para o dimensionamento de estruturas em perfis tubulares. Considerando esta perspectiva, este trabalho apresenta uma análise de ligações tipo T com reforço tipo chapa com perfis tubulares circulares (CHS) para o banzo e para o montante efetuada com base na norma europeia, Eurocode 3, no CIDECT, na NBR 16239:2013 e ISO 14346. Desenvolveu-se no programa Ansys um modelo de elementos finitos para cada tipo de ligação analisada, calibrado e validado com resultados experimentais e numéricos existentes na literatura. Verificou-se a influência da compressão atuante no montante no comportamento global das ligações. As não-linearidades físicas e geométricas foram incorporadas aos modelos a fim de se mobilizar totalmente a capacidade resistente desta ligação. A nãolinearidade do material foi considerada através do critério de plastificação de von Mises através da lei constitutiva tensão versus deformação bilinear de forma a exibir um comportamento elasto-plástico com encruamento. A não-linearidade geométrica foi introduzida no modelo através da Formulação de Lagrange Atualizada. A análise dos esforços resistentes obtidos em comparação com os resultados do modelo numérico, apresentaram valores a favor da segurança no cálculo utilizando as equações de dimensionamento. Por fim um estudo para fatores de correção das equações de dimensionamento foi também proposto.

Tubular graphite cones with single-crystal nanotips and their antioxygenic properties.

Tubular graphite cones (TGCs) with a single-crystal nanotip have been achieved by means of microwave plasma-assisted chemical vapor deposition using in-situ-evaporated Fe catalysts. The absence of the disorder-induced D band in Raman spectra revealed the single-crystalline feature of the nanotip. TGCs were found to stem from Fe catalytic carbon spherules on the order of 100 mum diameter, whose critical role in promoting both nucleation and plasma annealing in the formation of highly crystalline TGCs is discussed. The crystalline quality of such TGCs can be further verified by the investigation of their oxidative stability in air. All TGCs can survive up to 600 degrees C without any structural variations, and a few TGCs still survive with an anisotropic etched and stepped nanotip at temperatures up to 800 degrees C, much better than CNTs. Thus, TGCs with single crystalline nanotips are potential candidates for scanning probes in high-temperature oxygen-containing environments.

Force ripple compensation in a tubular linear generator for marine renewable generation

Tubular permanent magnet linear generators are a promising generator technology for use in marine renewables. One aspect of their design relates to the conditions necessary for achieving a smooth thrust response from the generator, free from cogging and periodic variations due to spatial harmonics of the flux cutting the generator coils. This paper presents an experimental and finite element study of the sources of thrust ripple in a prototype linear generator for marine generation. A simple self-commutated control scheme is shown, which uses linear Hall-effect sensors and look-up-table based feed-forward compensation to derive the excitation currents required to drive the machine with constant force. Details of the controller's FPGA based implementation are given, including its strategy for detecting sensor failure. © 2011 IEEE.

Characterisation of friction and lubrication regimes in premium tubular connections

A friction test rig has been developed to carry out repeated sliding friction tests for premium tubular connections. The test rig enables accurate measurement of friction in various contact regimes which are relevant to the threaded connections between tubular components. Higher load tests can simulate the contact in metal-to-metal seals under very high contact pressures by using perpendicular pin-on-pin tests. The contact in the thread loading flank under intermediate pressures can be simulated by using larger radius coupon-on-coupon tests. The measured coefficient of friction is well correlated with a lubrication parameter combining lubricant film thickness and initial surface roughness. © 2012 Elsevier Ltd. All rights reserved.

Thermal modelling of a tubular linear machine for marine renewable generation

A lumped parameter thermal model has been constructed for a tubular linear machine that has been designed for use in a marine environment. It shows good correlation to both steady state and transient experimental tests on the machine. The model has been developed for a stationary machine in a laboratory environment - the modelling techniques used and enhancements to enable the application of the model directly to marine scenarios are discussed.

Detailed thermal modelling of a tubular linear machine for marine renewable generation

A detailed lumped-parameter thermal model is presented for a tubular linear machine that has been designed for use in a marine environment. The model has been developed for a static machine, the worst-case thermal scenario, and is used to establish a rating for the machine. The model has been validated against a large range of experimental tests and shows good correlation to both steady-state and transient experimental results. The model was constructed from a mostly theoretical basis with very little calibration, suggesting that the techniques used are applicable in a more general sense. © 2013 IEEE.

Raman scattering from an individual tubular graphite cone

　

Oxidative dehydrogenation of propane in a dense tubular membrane reactor

Oxidative dehydrogenation of propane (ODP) to propylene was investigated in a dense tubular membrane reactor made of Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) at 700degreesC and 750degreesC. The propylene selectivity in the membrane reactor (44.2%) is much higher than that in the fixed-bed reactor (15%) at the similar propane conversion (23-27%). Higher propylene selectivity in the membrane reactor was attributed to the lattice oxygen (O2-) supplied through the membrane.

An amperometric detector with a tubular electrode deposited on the capillary for capillary liquid chromatography

A procedure is described for the preparation of a tubular electrode by chemical deposition of platinum at the end of a fused-silica capillary. The properties of the electrode were tested under liquid chromatographic conditions, demonstrating that both the static and the dynamic behaviour of the detection system satisfy the requirements of capillary chromatographic separations and compare well with a wall-jet amperometric system and with UV photometric detection. The detection system described is easy to prepare and does not require any time-consuming positioning of the electrode system as it is integrated into the separation part of the apparatus. (C) 1998 Elsevier Science B.V.