Assessement of Malaria Transmission in an Area with Very Low Mosquito Density

The increase in world travel in recent years, especially to and from areas where vector-borne diseases are endemic, has resulted in a substantial rise in imported cases of those diseases. In particular, malaria is a cause of concern. In those countries at the edge of its distribution, it can be difficult to distinguish between autochthonous and imported cases. However, distinguishing between the two is important because of the different allocation of resources to combat the disease that each requires. In general, observation of the various stages of parasite development in wild-caught female mosquitoes is considered evidence of autochthonous transmission. Observation of oocysts in the mosquito mid-gut testifies that mosquitoes are susceptible to infection but conclusions cannot be reached about their ability to complete the transmission cycle. Perhaps the best indication of autochthonous transmission is microscopic observation of sporozoites in mosquito salivary glands, since this detects parasites ready to be inoculated (BELER et al., 1990). Detection of circumsporozoite protein (CSP)(BURKOT, WILLIAMS & SCHNEIDER, 1984) in dry mosquito thoraxes, by Enzyme Linked Immunosorbent Assay (ELISA) is also widely used to determine transmission, especially when large numbers of mosquitoes need to be processed. Such assays provide information about the parasite species infecting the mosquito (BURKOT & WIRTZ, 1986; WIRTZ et al., 1987; BELER et al., 1990).

Escala de madurez gonadal de bonito Sarda chiliensis chiliensis (Cuvier, 1832)

El objetivo fue elaborar la escala de madurez gonadal macroscópica de Sarda chiliensis chiliensis con una validación basada en análisis histológicos. Se analizaron 591 muestras de gónadas provenientes del plan de seguimiento de la pesquería pelágica en el año 2014. A cada gónada se asignó un estadio de madurez macroscópico luego de la observación del desarrollo ovocitario y espermatogénico en los cortes histológicos. Se describieron seis estadios de maduración que van desde 0 (virginal) hasta el estadio 5 (recuperación en hembras, post expulsante en machos). Se compara la descripción de esta escala con trabajos anteriormente realizados, se discuten los criterios de catalogación y se dan recomendaciones para el seguimiento de la pesquería.

Predictors of death among patients who completed tuberculosis treatment: a population-based cohort study.

Background: Mortality among patients who complete tuberculosis (TB) treatment is still high among vulnerable populations. The objective of the study was to identify the probability of death and its predictive factors in a cohort of successfully treated TB patients. Methods: A population-based retrospective longitudinal study was performed in Barcelona, Spain. All patients who successfully completed TB treatment with culture-confirmation and available drug susceptibility testing between 1995 1997 were retrospectively followed-up until December 31, 2005 by the Barcelona TB Control Program. Socio-demographic, clinical, microbiological and treatment variables were examined. Mortality, TB Program and AIDS registries were reviewed. Kaplan-Meier and a Cox regression methods with time-dependent covariates were used for the survival analysis, calculating the hazard ratio (HR) with 95% confidence intervals (CI). Results: Among the 762 included patients, the median age was 36 years, 520 (68.2%) were male, 178 (23.4%) HIV-infected, and 208 (27.3%) were alcohol abusers. Of the 134 (17.6%) injecting drug users (IDU), 123 (91.8%) were HIV-infected. A total of 30 (3.9%) recurrences and 173 deaths (22.7%) occurred (mortality rate: 3.4/100 person-years of follow-up). The predictors of death were: age between 4160 years old (HR: 3.5; CI:2.15.7), age greater than 60 years (HR: 14.6; CI:8.924), alcohol abuse (HR: 1.7; CI:1.22.4) and HIV-infected IDU (HR: 7.9; CI:4.713.3). Conclusions: The mortality rate among TB patients who completed treatment is associated with vulnerable populations such as the elderly, alcohol abusers, and HIV-infected IDU. We therefore need to fight against poverty, and promote and develop interventions and social policies directed towards these populations to improve their survival.

Examination of Heterogeneous Crossing Sequences Between Toner and Rollerball Pen Strokes by Digital Microscopy and 3-D Laser Profilometry

The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner. With the mass marketing of laser printers and the popularity of rollerball pens, the determination of line crossing sequences between such instruments is encountered by forensic document examiners. This type of crossing presents difficulties with optical microscopic line crossing techniques involving ballpoint pens or gel pens and toner (1-4). Indeed, the rollerball's aqueous ink penetrates through the toner and is absorbed by the fibers of the paper, leaving the examiner with the impression that the toner is above the ink even when it is not (5). Novotny and Westwood (3) investigated the possibility of determining aqueous ink and toner crossing sequences by microscopic observation of the intersection before and after toner removal. A major disadvantage of their study resides in destruction of the sample by scraping off the toner line to see what was underneath. The aim of this research was to investigate the ways to overcome these difficulties through digital microscopy and three-dimensional (3-D) laser profilometry. The former was used as a technique for the determination of sequences between gel pen and toner printing strokes, but provided less conclusive results than that of an optical stereomicroscope (4). 3-D laser profilometry, which allows one to observe and measure the topography of a surface, has been the subject of a number of recent studies in this area. Berx and De Kinder (6) and Schirripa Spagnolo (7,8) have tested the application of laser profilometry to determine the sequence of intersections of several lines. The results obtained in these studies overcome disadvantages of other methods applied in this area, such as scanning electron microscope or the atomic force microscope. The main advantages of 3-D laser profilometry include the ease of implementation of the technique and its nondestructive nature, which does not require sample preparation (8-10). Moreover, the technique is reproducible and presents a high degree of freedom in the vertical axes (up to 1000 μm). However, when the paper surface presents a given roughness, if the pen impressions alter the paper with a depth similar to the roughness of medium, the results are not always conclusive (8). It becomes difficult in this case to distinguish which characteristics can be imputed to the pen impressions or the quality of the paper surface. This important limitation is assessed by testing different types of paper of variable quality (of different grammage and finishing) and the writing pressure. The authors will therefore assess the limits of 3-D laser profilometry technique and determine whether the method can overcome such constraints. Second, the authors will investigate the use of digital microscopy because it presents a number of advantages: it is efficient, user-friendly, and provides an objective evaluation and interpretation.

Cryo-electron microscopy of vitreous sections of native biological cells and tissues : methodology and applications

Résumé L'eau est souvent considérée comme une substance ordinaire puisque elle est très commune dans la nature. En fait elle est la plus remarquable de toutes les substances. Sans l'eau la vie sur la terre n'existerait pas. L'eau représente le composant majeur de la cellule vivante, formant typiquement 70 à 95% de la masse cellulaire et elle fournit un environnement à d'innombrables organismes puisque elle couvre 75% de la surface de terre. L'eau est une molécule simple faite de deux atomes d'hydrogène et un atome d'oxygène. Sa petite taille semble en contradiction avec la subtilité de ses propriétés physiques et chimiques. Parmi celles-là, le fait que, au point triple, l'eau liquide est plus dense que la glace est particulièrement remarquable. Malgré son importance particulière dans les sciences de la vie, l'eau est systématiquement éliminée des spécimens biologiques examinés par la microscopie électronique. La raison en est que le haut vide du microscope électronique exige que le spécimen biologique soit solide. Pendant 50 ans la science de la microscopie électronique a adressé ce problème résultant en ce moment en des nombreuses techniques de préparation dont l'usage est courrant. Typiquement ces techniques consistent à fixer l'échantillon (chimiquement ou par congélation), remplacer son contenu d'eau par un plastique doux qui est transformé à un bloc rigide par polymérisation. Le bloc du spécimen est coupé en sections minces (d’environ 50 nm) avec un ultramicrotome à température ambiante. En général, ces techniques introduisent plusieurs artefacts, principalement dû à l'enlèvement d'eau. Afin d'éviter ces artefacts, le spécimen peut être congelé, coupé et observé à basse température. Cependant, l'eau liquide cristallise lors de la congélation, résultant en une importante détérioration. Idéalement, l'eau liquide est solidifiée dans un état vitreux. La vitrification consiste à refroidir l'eau si rapidement que les cristaux de glace n'ont pas de temps de se former. Une percée a eu lieu quand la vitrification d'eau pure a été découverte expérimentalement. Cette découverte a ouvert la voie à la cryo-microscopie des suspensions biologiques en film mince vitrifié. Nous avons travaillé pour étendre la technique aux spécimens épais. Pour ce faire les échantillons biologiques doivent être vitrifiés, cryo-coupées en sections vitreuse et observées dans une cryo-microscope électronique. Cette technique, appelée la cryo- microscopie électronique des sections vitrifiées (CEMOVIS), est maintenant considérée comme étant la meilleure façon de conserver l'ultrastructure de tissus et cellules biologiques dans un état très proche de l'état natif. Récemment, cette technique est devenue une méthode pratique fournissant des résultats excellents. Elle a cependant, des limitations importantes, la plus importante d'entre elles est certainement dû aux artefacts de la coupe. Ces artefacts sont la conséquence de la nature du matériel vitreux et le fait que les sections vitreuses ne peuvent pas flotter sur un liquide comme c'est le cas pour les sections en plastique coupées à température ambiante. Le but de ce travail a été d'améliorer notre compréhension du processus de la coupe et des artefacts de la coupe. Nous avons ainsi trouvé des conditions optimales pour minimiser ou empêcher ces artefacts. Un modèle amélioré du processus de coupe et une redéfinitions des artefacts de coupe sont proposés. Les résultats obtenus sous ces conditions sont présentés et comparés aux résultats obtenus avec les méthodes conventionnelles. Abstract Water is often considered to be an ordinary substance since it is transparent, odourless, tasteless and it is very common in nature. As a matter of fact it can be argued that it is the most remarkable of all substances. Without water life on Earth would not exist. Water is the major component of cells, typically forming 70 to 95% of cellular mass and it provides an environment for innumerable organisms to live in, since it covers 75% of Earth surface. Water is a simple molecule made of two hydrogen atoms and one oxygen atom, H2O. The small size of the molecule stands in contrast with its unique physical and chemical properties. Among those the fact that, at the triple point, liquid water is denser than ice is especially remarkable. Despite its special importance in life science, water is systematically removed from biological specimens investigated by electron microscopy. This is because the high vacuum of the electron microscope requires that the biological specimen is observed in dry conditions. For 50 years the science of electron microscopy has addressed this problem resulting in numerous preparation techniques, presently in routine use. Typically these techniques consist in fixing the sample (chemically or by freezing), replacing its water by plastic which is transformed into rigid block by polymerisation. The block is then cut into thin sections (c. 50 nm) with an ultra-microtome at room temperature. Usually, these techniques introduce several artefacts, most of them due to water removal. In order to avoid these artefacts, the specimen can be frozen, cut and observed at low temperature. However, liquid water crystallizes into ice upon freezing, thus causing severe damage. Ideally, liquid water is solidified into a vitreous state. Vitrification consists in solidifying water so rapidly that ice crystals have no time to form. A breakthrough took place when vitrification of pure water was discovered. Since this discovery, the thin film vitrification method is used with success for the observation of biological suspensions of. small particles. Our work was to extend the method to bulk biological samples that have to be vitrified, cryosectioned into vitreous sections and observed in cryo-electron microscope. This technique is called cryo-electron microscopy of vitreous sections (CEMOVIS). It is now believed to be the best way to preserve the ultrastructure of biological tissues and cells very close to the native state for electron microscopic observation. Since recently, CEMOVIS has become a practical method achieving excellent results. It has, however, some sever limitations, the most important of them certainly being due to cutting artefacts. They are the consequence of the nature of vitreous material and the fact that vitreous sections cannot be floated on a liquid as is the case for plastic sections cut at room temperature. The aim of the present work has been to improve our understanding of the cutting process and of cutting artefacts, thus finding optimal conditions to minimise or prevent these artefacts. An improved model of the cutting process and redefinitions of cutting artefacts are proposed. Results obtained with CEMOVIS under these conditions are presented and compared with results obtained with conventional methods.

Rapid detection of multidrug-resistant Mycobacterium tuberculosis using the mycobacteria growth indicator tube (MGIT) system

The emergence of multidrug-resistant strains of Mycobacterium tuberculosis has increased the need for rapid drug susceptibility tests, which are needed for adequate patient treatment. The objective of the present study was to evaluate the mycobacteria growth indicator tube (MGIT) system to detect multidrug-resistant M. tuberculosis strains. The MGIT system was compared with two standard methods (proportion and resistance ratio methods). One hundred clinical M. tuberculosis isolates [25 susceptible to isoniazid (INH) and rifampicin (RIF), 20 resistant to INH, 30 resistant to INH-RIF, and 25 resistant to INH-RIF and other drugs] obtained in the State of São Paulo were tested for INH and RIF susceptibility. Full agreement among the tests was found for all sensitive and all INH-resistant strains. For RIF-resistant strains results among the tests agreed for 53 (96.4%) of 55 isolates. Results were obtained within 6 days (range, 5 to 8 days), 28 days and 12 days when using MGIT, the proportion method and the resistance ratio methods, respectively. The MGIT system presented an overall agreement of 96% when compared with two standard methods. These data show that the MGIT system is rapid, sensitive and efficient for the early detection of multidrug-resistant M. tuberculosis.

Antimicrobial resistance among invasive Haemophilus influenzae strains: results of a Brazilian study carried out from 1996 through 2000

A total of 1712 strains of Haemophilus influenzae isolated from patients with invasive diseases were obtained from ten Brazilian states from 1996 to 2000. ß-Lactamase production was assessed and the minimum inhibitory concentrations (MIC) of ampicillin, chloramphenicol, ceftriaxone and rifampin were determined using a method for broth microdilution of Haemophilus test medium. The prevalence of strains producing ß-lactamase ranged from 6.6 to 57.7%, with an overall prevalence of 18.4%. High frequency of ß-lactamase-mediated ampicillin resistance was observed in Distrito Federal (25%), São Paulo (21.7%) and Paraná (18.5%). Of the 1712 strains analyzed, none was ß-lactamase negative, ampicillin resistant. A total of 16.8% of the strains were resistant to chloramphenicol, and 13.8% of these also presented resistance to ampicillin, and only 3.0% were resistant to chloramphenicol alone. All strains were susceptible to ceftriaxone and rifampin and the MIC90 were 0.015 µg/ml and 0.25 µg/ml, respectively. Ceftriaxone is the drug of choice for empirical treatment of bacterial meningitis in pediatric patients who have not been screened for drug susceptibility. The emergence of drug resistance is a serious challenge for the management of invasive H. influenzae disease, which emphasizes the fundamental role of laboratory-based surveillance for antimicrobial resistance.

Differences in pressure and temperature transitions of proteins and polymer gels

Pressure-driven and temperature-driven transitions of two thermoresponsive polymers, poly(N-isopropylacrylamide) (pNIPAM) and poly(N-vinylisobutyramide) (pNVIBA)), in both a soluble linear polymer form and a cross-linked hydro-gel form, were examined by a dynamic light-scattering method and direct microscopic observation, respectively. Their behavior was compared with that of protein systems. Changes in some characteristic parameters in the time-intensity correlation functions of dynamic light-scattering measurement of aqueous solutions of pNIPAM at various pressures and temperatures showed no essential differences during temperature and pressure scanning and, as a whole, the motions of polymers in aqueous solutions were similar in two types of transitions until chain shrinkage occurred. The gels (cross-linked polymer gels) prepared from the thermoresponsive polymers also showed similar volume transitions responding to the pressure and temperature increase. In temperature transitions, however, gels showed drastic volume shrinkage with loss of transparency, while pressure-induced transition showed a slow recovery of transparency while keeping the size, after first transient drastic volume shrinkage with loss of transparency. At a temperature slightly higher than the transition under atmospheric temperature, so-called reentry of the volume change and recovery of the transparency were observed during the pressure-increasing process, which implies much smaller aggregation or non-aggregated collapsed polymer chains in the gel at higher pressures, indicating a certain mechanistic difference of the dehydration processes induced by temperature and pressure.

Étude de l’interaction entre le champignon mycorhizien Glomus irregulare et les bactéries du sol

Dans cette étude, nous avons isolé et cultivé des bactéries intimement liées aux spores du champignon mycorhizien Glomus irregulare prélevées dans la rhizosphère de plants d’Agrostis stolonifera L. récoltés dans un sol naturel. Le séquençage des 29 morphotypes isolés a révélé la présence de seulement sept taxons bactériens (Variovorax paradoxus, Microbacterium ginsengiosoli, Sphingomonas sp., Bacillus megaterium, B. simplex, B. cereus et Kocuria rhizophila). Des isolats de chacun de ces sept taxons ont ensuite été cultivés in vitro sur le mycélium de G. irregulare afin d’observer par microscopie leur capacité à croitre et à s’attacher au mycélium en absence d’éléments nutritifs autres que ceux fournis par le champignon. Tous les isolats, sauf B. cereus, ont été capables de bien croitre dans le système expérimental et de s’attacher au mycélium en formant des structures ressemblant à des biofilms sur la surface du champignon. Toutefois, B. simplex formait ces structures plus rapidement, soit en 15 jours, alors que les autres isolats les ont formés après 30 jours (K. rhizophila et B. megaterium) ou 45 jours (V. paradoxus, M. ginsengiosoli et Sphingomonas sp.). D’autre part, la technique PCR-DGGE a permis d’analyser la diversité bactérienne associée aux spores. La diversité des taxons associés aux spores de G. irregulare qu’il a été possible d’isoler et de cultiver in vitro a été nettement moindre que celle qui était présente sur la surface des spores, alors que la biodiversité bactérienne totale du sol a été encore beaucoup plus élevée. Les bactéries associées aux champignons mycorhiziens jouent probablement un rôle important dans la capacité des plantes à résister aux stress biotiques et abiotiques auxquels elles sont soumises.

Descripción matemática con dimensiones fractales de células normales y con anormalidades citológicas de cuello uterino

Introducción. La geometría fractal ha mostrado ser adecuada en la descripción matemática de objetos irregulares; esta medida se ha denominado dimensión fractal. La aplicación del análisis fractal para medir los contornos de las células normales así como aquellas que presentan algún tipo de anormalidad, ha mostrado la posibilidad de caracterización matemática de su irregularidad. Objetivos. Medir, a partir de la geometría fractal células del epitelio escamoso de cuello uterino clasificadas como normales, atipias escamosas de significado indeterminado (ASC-US) y lesiones intraepiteliales escamosas de bajo grado (LEIBG), diagnosticadas mediante observación microscópica, en busca de mediciones matemáticas que las distingan. Metodología. Este es un estudio exploratorio descriptivo en el que se calcularon las dimensiones fractales, con el método de box counting simplificado y convencional, de los contornos celular y nuclear de 13 células del epitelio escamoso de cuello uterino normales y con anormalidades como ASC-US y lesiones intraepiteliales de bajo grado (LEI BG), a partir de fotografías digitales de 7 células normales, 2 ASCUS y 4 LEI BG diagnosticadas con criterios citomorfológicos mediante observación microscópica convencional. Resultados. Se desarrolló una medida cuantitativa, objetiva y reproducible del grado de irregularidad en las células del epitelio escamoso de cuello uterino identificadas microscópicamente como normales, ASC-US y LEI BG. Conclusiones Se evidenció una organización fractal en la arquitectura celular normal, así como en células ASC-US y las lesiones intraepiteliales de bajo grado (LEI BG). No se encontraron diferencias entre los tipos celulares estudiados.

Effect of hydrophobic plasticizers on functional properties of gelatin-based films

The aim of this study was the production and characterization of gelatin-based films using hydrophobic plasticizers derived from citric acid and soy lecithin as emulsifier. The films were characterized as to their mechanic properties, permeability to water vapor, opacity, morphology and possible interactions using Fourier transform infrared spectroscopy. Tensile strength values (TS) varied from 36 to 103 MPa, how-ever, the increase in the concentration of plasticizers (acetyltributyl citrate and tributyl citrate) reduced TS by 57% and no relation was observed between plasticizer quantities and the elongation in the quantities tested. Permeability to water vapor varied between 0.17 and 0.34 (g mm/m(2) h kPa), slightly increasing with the increase in concentration of plasticizers. The effectiveness in the use of soy lecithin emulsifier in the homogenization between the compounds could be proven by microscopic observation using confocal laser microscopy. (C) 2009 Elsevier Ltd. All rights reserved.

Chronic Suppurative Otitis Media in Cleft Palate: Microorganism Etiology and Susceptibilities

Objective: To investigate the microbial etiology of suppurative chronic otitis media (SCOM) in patients with complete cleft lip and palate and isolated cleft palate and to determine the sensitivity of isolated microorganisms to antibiotics by drug diffusion from impregnated discs in agar and the minimum inhibitory concentration of each drug to these microorganisms by drug dilution in agar. Design/Patients: Effusion samples of SCOM obtained from 40 patients with cleft lip and palate registered at the Hospital for Rehabilitation of Craniofacial Anomalies, University of Sao Paulo, at Bauru, Brazil, were bacteriologically analyzed by cultures. The isolated bacteria were submitted to an in vitro susceptibility test to clinically used drugs. Results: Positive cultures were obtained in 100% of studied cases. Among the 57 strains observed, the most frequent were Pseudomonas aeruginosa (35%), Staphylococcus aureus (15.5%), Enterococcus faecalis (14%), and Proteus mirabilis (12%). The frequency of Gram-negative bacilli (enterobacteriaceae and nonfermentative bacilli) was 67%. Pseudomonas aeruginosa presented the highest sensitivity to ciprofloxacin, and enterobacteriaceae exhibited the highest sensitivity to gentamicin. The strains of S. aureus and E. faecalis presented the highest sensitivity to imipenem and sulfamethoxazole/trimethoprim, respectively. Conclusion: Patients with cleft lip and palate presenting with SCOM exhibited 100% positive cultures, with the highest frequency of Pseudomonas and enterobacteriaceae. With regard to the action of antibiotics, imipenem was effective against the four species of isolated microorganisms, followed by ciprofloxacin, which was effective against 75% of isolated species.

Rhodococcus equi isolation from sputum of patients with suspected tuberculosis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Usefulness of catheter tip culture in the diagnosis of neonatal infections

Objective: To determine the number of colony-forming units (CFU) that best correlates with catheter-related infections (CRI) in newborns.Methods: This was a prospective study of semiquantitative cultures of catheter tips obtained from newborns in the neonatal unit at Faculdade de Medicina de Botucatu, state of São Paulo, Brazil. The microorganisms isolated from catheter and peripheral blood cultures were identified and submitted to a drug susceptibility test. The optimal cutoff point was determined by the receiver operating characteristic (ROC) curve.Results: A total of 85 catheters obtained from 63 newborns were studied. Staphylococcus epidermidis was the predominant species in the catheters (75%). Eight of 11 (72.7%) CRI episodes were associated with coagulase-negative staphylococci, six of which were of the S. epidermidis type. ROC curve analysis indicated that the optimal cutoff point for the diagnosis of CRI was 122 CFU.Conclusions: The cutoff point of 122 CFU correlated best with the diagnosis of CRI in newborns.

Morphometric study of the midgut epithelium in larvae of Diatraea saccharalis Fabricius (Lepidoptera: Pyralidae)

A larva de Diatraea saccharalis Fabricius (broca-da-cana) tem grande interesse econômico, pois afeta o cultivo e aproveitamento industrial da cana-de-açúcar. Entretanto, poucos são os estudos sobre a morfologia interna desse inseto. O objetivo deste trabalho foi estudar, morfometricamente, o seu epitélio intestinal, ao longo de seu comprimento, visando caracterizar regiões estruturalmente diferentes. O intestino médio de larvas no último instar foi subdividido em três regiões: proximal, mediana e distal e os fragmentos foram processados para observação em microscopia de luz. Os cortes histológicos foram analisados em sistema computadorizado de análise de imagens para medir comprimento, largura e área do epitélio, das diferentes células epiteliais, dos seus respectivos núcleos e do lúmen intestinal. Os dados obtidos foram submetidos ao teste estatístico de Kruskal-Wallis e à análise multivariada. Nossos resultados mostraram que o intestino médio apresentou-se constituído, morfometricamente, por duas diferentes regiões, proximal e distal; a região mediana apresentou valores coincidentes tanto com a região proximal quanto com a distal, sugerindo ser região intermediária. As células epiteliais (colunares, caliciformes e regenerativas), quando avaliadas pela análise estatística multivariada, não apresentaram diferença morfométrica nas diferentes regiões do intestino médio. Entretanto, a análise de variância, realizada para variáveis isoladas, mostrou que as células regenerativas apresentaram maior variabilidade morfométrica.