970 resultados para Environmental preservation area
Resumo:
This paper reports manganese (Mn) fractionation in samples collected from the water column and sediments in an environmental protection area in the Alto do Paranapanema Basin (Sao Paulo State, Brazil). The three locations studied showed equivalent Mn levels, with moderate seasonal differences (p < 0.05). The sediment samples contained five Mn species (p < 0.05): iron and manganese (hydr)oxides > Mn bound to carbonates approximate to exchangeable Mn approximate to Mn bound to silicates > Mn bound to organic matter (p < 0.05). The water samples contained three species (p < 0.05): particulate Mn > labile Mn approximate to non-labile Mn. The data suggest that Mn has a natural origin (Enrichment Factor EF < 2; Geoaccumulation Index I(geo) < 0) and moderate environmental risk (Risk Assessment Code RAC similar to 30%). At the same time, under certain conditions some manganese species could be present in a state of equilibrium between the water column and sediment. These results could provide a basis for Mn management in the Alto do Paranapanema Basin.
Resumo:
The leaders` organizations of several different sectors have as characteristic to measure their own performance in a systematic way. However, this concept is still unusual in agricultural enterprises, including the mechanization sector. Mechanization has an important role on the production costs and to know its performance is a key factor for the agricultural enterprise success. This work was generated by the importance that measurement of performance has for the management and the mechanization impact on the production costs. Its aim is to propose an integrated performance measurement system to give support to agricultural management. The methodology was divided in two steps: adjustment of a conceptual model based on Balanced Score Card - BSC; application of the model in a study case at sugar cane mill. The adjustment and the application of the conceptual model allowed to obtain the performance index in a systematic way, that are associated to: costs and deadline ( traditionally used); control and improvement on the quality of operations and support process; environmental preservation; safety; health; employees satisfaction; development of information systems. The adjusted model helped the development of the performance measurement system for the mechanized management systems and the index allows an integrated view of the enterprise, related to its strategic objectives.
Resumo:
MSCC Dissertation in Computer Engineering
Resumo:
A utilização de energia renovável é hoje tema abordado em todo o mundo, devido à preocupação com a preservação do meio ambiente. Entre as energias renováveis, a biomassa destaca-se pela excelente disponibilidade que possui. Os dejetos bovinos são uma das mais abundantes, o qual tem grande potencial energético, se fermentado corretamente em biodigestores, obtendo como um dos produtos finais, o biogás. Esse gás é constituído na sua maior parte por gás metano (CH4) que é altamente inflamável. Neste trabalho pretende-se fazer a avaliação do potencial energético das propriedades de produção de leite na região do concelho de BRAGA aplicando uma tecnologia de queima de biogás e de produção de eletricidade utilizando um sistema de cogeração convencional e uma tecnologia mais recente, o Organic Rankine Cycle (ORC) e explicitando a respetiva análise económica. As opções por um sistema ORC na central em análise foram justificadas ponderando as vantagens e desvantagens deste ciclo em relação ao ciclo de vapor de água. O objetivo é a obtenção de energia elétrica e térmica e o aumento do rendimento global da instalação com o aproveitamento de todas as energias disponíveis, assim como a eliminação da toxidade dos dejetos para aproveitamento como biomassa. Partindo do levantamento bibliográfico e caraterização das diversas propriedades existentes no concelho, utilizando a tecnologia mais indicada e atual para este tipo de instalação. A biomassa utilizada foi uma mistura de dejetos bovinos com água. O biogás produzido foi convertido em energia elétrica e térmica, através da sua queima. Tem-se assim uma central que além de dar destino adequado aos dejetos animais, diminui a contaminação ambiental, evita a emissão de gás metano para a atmosfera e produz biogás. Efetua-se os cálculos económicos para dois cenários distintos, implementação de uma central de valorização de biogás em cada um dos oito maiores produtores de leite do núcleo de Penso e o aproveitamento dos dejetos produzidos pelos mesmos para implementação de uma central global de recolha dos mesmos, onde é feito o tratamento dos mesmos e a consequente produção de biogás. Na análise económica foram utilizados os seguintes critérios: o VAL (valor atual líquido), a TIR (taxa interna de rendibilidade) e o Período de Retorno Financeiro do Projeto.
Resumo:
Prestando atenção e observando o que se passa à nossa volta, conclui-se que as condições climáticas da Terra estão a mudar rapidamente. As alterações ambientais que impomos ao nosso planeta em resultado da atividade humana nas suas múltiplas áreas de ação, obrigam-nos a tomar consciência da necessidade na adoção de atitudes e formas de vida mais condizentes com a preservação do ambiente, agindo no respeito pelos processos naturais de renovação ambiental. A resposta a este problema tem-se traduzido na aplicação de um conjunto de legislações e práticas com o objetivo de promover uma redução significativa das emissões de gases com efeito de estufa. Entre outros, os gases fluorados são dos mais relevantes gases com efeito de estufa, conforme identificados no Protocolo de Quioto. Esta tese tem como objetivo mostrar as ações que os técnicos de AVAC e refrigeração necessitam de executar para a sua certificação, para operar com equipamentos fixos de refrigeração que contenham gases fluorados com efeito de estufa, bem como procedimentos e cuidados necessários no respeito e conformidade com a legislação em vigor. Foi construída uma plataforma experimental com um equipamento de refrigeração para a prática e manuseamento do gás fluorados com a eventualidade de desenvolver sessões de formação.
Resumo:
From 1977 (index case) to 2006, 87 cases of visceral leishmaniasis were confirmed in the municipality of Rio de Janeiro, Brazil, in periurban areas on the continental and coastal slopes of the Pedra Branca massif and the continental slopes of the Gericinó massif. The majority (65.5%) of the patients were more than five years old, predominantly males (61.5%), but without any difference between the sexes below the age of 14 years. The overall fatality rate was 10.4%. Two cases of visceral leishmaniasis/human immunodeficiency virus coinfection were detected. Leishmania chagasi was isolated from human and canine cases. The associations between the presence of phlebotomines and human and canine migrations, disorderly occupation involving degradation of environmental preservation areas and poor socioeconomic conditions may have created a favorable setting for the establishment and propagation of the disease. Close epidemiological surveillance associated with traditional control measures and others (active case researches, land clearing and health education), reduced the incidence of human cases from 2.8 per 100,000 inhabitants in 1981 to less than 0.01 per 100,000 since 1997. The canine infection rates decreased from 4.6% in 1984 to 1.6% in 2008. Lutzomyia longipalpis was not detected in some locations where human and canine cases occurred. In the years 2007 and 2008, no new human cases were reported, but there is a persistent and worrisome residual canine seroprevalence.
Resumo:
The study was carried out in a 8.2 ha area in an environmental protection area of tropical sea coastal sand dune with "restinga" vegetation in Salvador, Bahia, northeastern Brazil. A total of 1760 bees of Xylocopa (Neoxylocopa) cearensis Ducke, 1910 were netted during the whole year on flowers of 43 plant species belonging to 26 botanic families. The majority of the individuals (79%) concentrated their foraging activity in five plant species. Individuals foraged all day long being the greatest activity between 8 h and 14 h. Similar proportions of young and old bees were sampled over the year. The density of substrates used for nesting was 4.56/ha. In total, 94% of the nests were found in branches of Agaristha revoluta (Spr.) DC. (Ericaceae). The great occurrence (68.7%) of old perforations indicates that the nests were used twice or more times by bees.
Resumo:
We studied the ectoparasitic bat flies of three phyllostomid vampire bat species. Bats were collected monthly from April 2004-March 2005 in caves within the Cafuringa Environmental Protection Area in the Federal District of Brazil. A total of 1,259 specimens from six species in the Streblidae family were collected from 332 bats. High host affinity from the sampled bat fly species and high prevalence of bat flies confirms the primary fly-host associations (Strebla wiedemanni, Trichobius parasiticus and Trichobius furmani with Desmodus, Trichobius diaemi and Strebla diaemi with Diaemus and T. furmani with Diphylla). Male flies outnumbered females in several associations. Some of the observed associations (e.g., Strebla mirabilis with Desmodus and S. mirabilis, Trichobius uniformis and S. wiedemanni with Diphylla) were inconclusive and the causes of the associations were unclear. There are several explanations for these associations, including (i) accidental contamination during sampling, (ii) simultaneous capture of several host species in the same net or (iii) genuine, but rare, ecological associations. Although various species of vampire bats share roosts, have similar feeding habits and are close phylogenetic relatives, they generally do not share ectoparasitic streblid bat flies. T. diaemi and S. diaemi associations with Diaemus youngi have not been previously reported in this region.
Resumo:
Phenology of the Braconidae (Hymenoptera, Ichneumonoidea) at Área de Proteção Ambiental of Descalvado, São Paulo State. The flight phenology of the Braconidae fauna was conducted using Malaise traps in five sites of the Environmental Protected Area of Descalvado. A total of 2,792 specimens, representing 22 subfamilies, was sampled throughout a period of sixteen months from May, 1999 to August, 2000. The traps catches for koinobionts peak was in August, 1999 a month before of the idiobionts peak and in June, 2000 both peaks were simultaneous. The phenological peaks of dominant koinobiont taxa (Microgastrinae) were similar to all koinobionts, and the peaks of dominant idiobiont taxa (Doryctinae) were similar to all idiobionts, as well. December, 1999 and February, 2000 were the richer months in number of subfamilies (N= 19 and 18, respectivaly), corresponding to the same period when the subfamilies which potentially attack Lepidoptera where collected. The number of females was superior to the number of males and this relation was more accentuated in koinobionts. The peaks of both females and males were similar to dominate koinobiont and idiobionte taxa.
Resumo:
Peatlands form in areas where net primary of organic matter production exceeds losses due to the decomposition, leaching or disturbance. Due to their chemical and physical characteristics, bogs can influence water dynamics because they can store large volumes of water in the rainy season and gradually release this water during the other months of the year. In Diamantina, Minas Gerais, Brazil, a peatland in the environmental protection area of Pau-de-Fruta ensures the water supply of 40,000 inhabitants. The hypothesis of this study is that the peat bogs in Pau-de-Fruta act as an environment for carbon storage and a regulator of water flow in the Córrego das Pedras basin. The objective of this study was to estimate the water volume and organic matter mass in this peatland and to study the influence of this environment on the water flow in the Córrego das Pedras basin. The peatland was mapped using 57 transects, at intervals of 100 m. Along all transects, the depth of the peat bog, the Universal Transverse Mercator (UTM) coordinates and altitude were recorded every 20 m and used to calculate the area and volume of the peatland. The water volume was estimated, using a method developed in this study, and the mass of organic matter based on samples from 106 profiles. The peatland covered 81.7 hectares (ha), and stored 497,767 m³ of water, representing 83.7 % of the total volume of the peat bog. The total amount of organic matter (OM) was 45,148 t, corresponding to 552 t ha-1 of OM. The peat bog occupies 11.9 % of the area covered by the Córrego das Pedras basin and stores 77.6 % of the annual water surplus, thus controlling the water flow in the basin and consequently regulating the water course.
Resumo:
The aim of this work is to establish a program for the treatment of chemical residues and waste waters at the Centro de Energia Nuclear na Agricultura (CENA/USP), for environmental preservation and training of staff. Five tons of stored residues and the ones currently generated in the laboratories have to be treated. Rational use of water is also part of the program. The traditional purification by distillation has been replaced by purification with ion exchange resins. Lower energy consumption and better water quality were achieved.
Resumo:
With the intense debate, in Brazil, between landowners and public agencies about the amount of area with forest cover needed in different regions, there is an increase of the need for provision of technical data used as a basis for decision making. One of the criteria to evaluate the effect of forest cover in protecting water resources is the soil loss, which leads to several consequences on the environment, including the silting of the rivers. Therefore, this study aimed to evaluate the reduction in the soil loss in micro watersheds with different reliefs, size and location of forest cover, in the Corumbataí River watershed, in the state of São Paulo, using the Revised Universal Soil Loss Equation (RUSLE) in a GIS environment. For this study, 18 watersheds in three degrees of slope were selected, and 20 scenarios for land-use were established, by analyzing the influence of the PPA size, and the size and the location of the Legal Reserve. The results showed that: a) the effect of forest cover in reducing annual soil loss varies depending on the average slope of the watershed; b) the PPA width must be determined taking into account the slope of the watershed; c) the Legal Reserve must be located along the PPA. These provide better results in reducing annual soil loss.
Resumo:
Soil islands on rocky surfaces often harbor aggregated vegetation that consists of insular plant communities. These islands are typical of the rocky outcrops and in various parts of Brazil form the so-called "campos rupestres" vegetation. Four of such sites have been selected in the state of Bahia, Northeast Brazil, for this comparative study on floristics and vegetation structure: three areas situated inside the "Parque Nacional da Chapada Diamantina" (Guiné, Fumaça and "Gerais da Fumaça") and one is at the border of the Environmental Protection Area of "Marimbus-Iraquara" ("Mãe Inácia"). All occurring vegetation islands were studied in four random plots of 10 × 10 m per site. Soil was often shallow, sandy and acidic. Vascular plant species were determined, with respective life forms and canopy coverage areas. The total number of species when all four sites were added was 135, and the number of species per island varied from 2 to 32. The areas of the 214 soil islands varied from 0.015 to 91.9 m², totaling 568 m² in the four sites. Monocotyledon families were dominant, essentially Velloziaceae, as well as Orchidaceae, Bromeliaceae, Amaryllidaceae and Cyperaceae. Among the eudicotyledons, dominant families were mainly Clusiaceae, Asteraceae and Melastomataceae. The biological spectra revealed that phanerophytes and hemicryptophytes predominated among the life forms, while chamaephytes had the largest coverage area. Epilithic and desiccant chamaephytes composed the most conspicuous interspecific associations, and were probably related to early successional processes. Sites closest to one another were not the most similar in structure, indicating that other factors more relevant than distance might be involved in the abundance of species in space.
Resumo:
Efficient production and consumption of energy has become the top priority of national and international policies around the world. Manufacturing industries have to address the requirements of the government in relation to energy saving and ecologically sustainable products. These industries are also concerned with energy and material usage due to their rising costs. Therefore industries have to find solutions that can support environmental preservation yet maintain competitiveness in the market. Welding, a major manufacturing process, consumes a great deal of material and energy. It is a crucial process in improving a product’s life-cycle cost, strength, quality and reliability. Factors which lead to weld related inefficiencies have to be effectively managed, if industries are to meet their quality requirements and fulfil a high-volume production demand. Therefore it is important to consider some practical strategies in welding process for optimization of energy and material consumption. The main objective of this thesis is to explore the methods of minimizing the ecological footprint of the welding process and methods to effectively manage its material and energy usage in the welding process. The author has performed a critical review of the factors including improved weld power source efficiency, efficient weld techniques, newly developed weld materials, intelligent welding systems, weld safety measures and personnel training. The study lends strong support to the fact that the use of eco-friendly welding units and the quality weld joints obtained with minimum possible consumption of energy and materials should be the main directions of improvement in welding systems. The study concludes that, gradually implementing the practical strategies mentioned in this thesis would help the manufacturing industries to achieve on the following - reduced power consumption, enhanced power control and manipulation, increased deposition rate, reduced cycle time, reduced joint preparation time, reduced heat affected zones, reduced repair rates, improved joint properties, reduced post-weld operations, improved automation, improved sensing and control, avoiding hazardous conditions and reduced exposure of welder to potential hazards. These improvement can help in promotion of welding as a green manufacturing process.
Resumo:
In Brazil, although the coffee plantations are predominantly grown under full sunlight, the use of agroforestry systems can lead to socioeconomic advantages, thus providing a favorable environment to the crop by promoting its sustainability as well as environmental preservation. However, there is a lack of information on physiological quality of the coffee seeds produced under different levels of solar radiation. Within this context, the objective of this study was to evaluate the influence of different levels of solar radiation and maturation stages on the physiological quality of coffee (Coffea arabica L.) seeds, cv. Acaiá Cerrado MG-1474. Three levels of solar radiation (plants grown under full sunlight; under plastic screens of 35% shading; and under plastic screens of 50% shading) and three maturation stages (cherry, greenish-yellow and green) were assessed. Physiological quality of seeds was assessed by using germination test, first count of germination, abnormal seedlings, dead seeds, and seedlings with open cotyledonary leaves. Electrophoretic analysis of isoenzymes catalase, esterase, superoxide dismutase and peroxidase was also performed. With the evolution of development the coffee seeds presents increases on physiological quality, and at its beginning the seeds show improvements on quality with the reduction of solar radiation.