Energy Efficiency through Significance-Based Computing

An extension of approximate computing, significance-based computing exploits applications' inherent error resiliency and offers a new structural paradigm that strategically relaxes full computational precision to provide significant energy savings with minimal performance degradation.

On The Energy-Efficiency of Byte-Addressable Non-Volatile Memory

Non-Volatile Memory (NVM) technology holds promise to replace SRAM and DRAM at various levels of the memory hierarchy. The interest in NVM is motivated by the difficulty faced in scaling DRAM beyond 22 nm and, long-term, lower cost per bit. While offering higher density and negligible static power (leakage and refresh), NVM suffers increased latency and energy per memory access. This paper develops energy and performance models of memory systems and applies them to understand the energy-efficiency of replacing or complementing DRAM with NVM. Our analysis focusses on the application of NVM in main memory. We demonstrate that NVM such as STT-RAM and RRAM is energy-efficient for memory sizes commonly employed in servers and high-end workstations, but PCM is not. Furthermore, the model is well suited to quickly evaluate the impact of changes to the model parameters, which may be achieved through optimization of the memory architecture, and to determine the key parameters that impact system-level energy and performance.

Looking for free riding: Energy efficiency incentives and Italian homeowners

We examine the effect of energy efficiency incentives on household energy efficiency home improvements. Starting in February 2007, Italian homeowners have been able to avail themselves of tax credits on the purchase and installation costs of certain types of energy efficiency renovations. We examine two such renovations—door/window replacements and heating system replacements—using multi-year cross-section data from the Italian Consumer Expenditure Survey and focusing on a narrow period around the introduction of the tax credits. Our regressions control for dwelling and household characteristics and economy-wide factors likely to influence the replacement rates. The effects of the policy are different for the two types of renovations. With window replacements, the policy is generally associated with a 30 % or stronger increase in the renovation rates and number of renovations. In the simplest econometric models, the effect is not statistically significant, but the results get stronger when we allow for heterogeneous effects across the country. With heating system replacements, simpler models suggest that the tax credits policy had no effect whatsoever or that free riding was rampant, i.e., people are now accepting subsidies for replacements that they would have done anyway. Further examination suggests a strong degree of heterogeneity in the effects across warmer and colder parts of the country, and effects in the colder areas that are even more pronounced than those for window replacements. These results should, however, be interpreted with caution due to the low rates of renovations, which imply that the effects are estimated relatively imprecisely.

Thermography-based virtual MPPT scheme for improving PV energy efficiency under partial shading conditions

This paper proposes a new thermography-based maximum power point tracking (MPPT) scheme to address photovoltaic (PV) partial shading faults. Solar power generation utilizes a large number of PV cells connected in series and in parallel in an array, and that are physically distributed across a large field. When a PV module is faulted or partial shading occurs, the PV system sees a nonuniform distribution of generated electrical power and thermal profile, and the generation of multiple maximum power points (MPPs). If left untreated, this reduces the overall power generation and severe faults may propagate, resulting in damage to the system. In this paper, a thermal camera is employed for fault detection and a new MPPT scheme is developed to alter the operating point to match an optimized MPP. Extensive data mining is conducted on the images from the thermal camera in order to locate global MPPs. Based on this, a virtual MPPT is set out to find the global MPP. This can reduce MPPT time and be used to calculate the MPP reference voltage. Finally, the proposed methodology is experimentally implemented and validated by tests on a 600-W PV array. 

Cross-layer Energy-Efficiency Optimization of Packet Based Wireless MIMO Communication Systems

Energy in today's short-range wireless communication is mostly spent on the analog- and digital hardware rather than on radiated power. Hence,purely information-theoretic considerations fail to achieve the lowest energy per information bit and the optimization process must carefully consider the overall transceiver. In this paper, we propose to perform cross-layer optimization, based on an energy-aware rate adaptation scheme combined with a physical layer that is able to properly adjust its processing effort to the data rate and the channel conditions to minimize the energy consumption per information bit. This energy proportional behavior is enabled by extending the classical system modes with additional configuration parameters at the various layers. Fine grained models of the power consumption of the hardware are developed to provide awareness of the physical layer capabilities to the medium access control layer. The joint application of the proposed energy-aware rate adaptation and modifications to the physical layer of an IEEE802.11n system, improves energy-efficiency (averaged over many noise and channel realizations) in all considered scenarios by up to 44%.

South Carolina Energy Office pre-approved Energy Efficiency Products and Measures

South Carolina law (48-52-640) requires state agencies to submit a disclaimer statement to the State Energy Office with its annual report stating that it did not purchase an energy conservation product that had not been certified by the State Energy Office. This is a list of preapproved products, retrofits and upgrades.

Improving energy efficiency in the road freight transport sector: the application of a vehicle approach

Several approaches can be used to analyse performance, energy consumption and CO2 emissions in freight transport. In this paper we define and apply a vehicle-oriented, bottom up survey approach, the so called ‘vehicle approach’, in contrast to a ‘supply chain approach’. The main objective of the approach is to assess the impacts of various freight transport operations on efficiency and energy use. We apply the approach, comparing official statistics on freight transport and energy efficiency in Britain and France. Results on freight intensity, vehicle utilisation, fuel use, fuel efficiency and CO2 intensity are compared for the two countries. The results indicate comparable levels of operational and fuel efficiency in road freight transport operations in the two countries. Issues that can be addressed with the vehicle approach include: the impacts of technology innovations and logistics decisions implemented in freight companies, and the quantification of the effect of policy measures on fuel use at the national level.

Energy efficiency and greenhouse gas emissions of different supply chains: a comparison of French, UK and Belgian cases

Freight transportation system is critical to economic activity but it carries significant environmental costs, notably GHG emissions and climate change : energy use and corresponding CO2 emissions is increasing faster in freight transport than in other sectors and this increase is primarily the result of increased trade. This paper compares the transport activities, associated energy consumption and CO2 emissions of different supply chains for a range of products in three countries: Belgium, France and United Kingdom. Among the products considered are furniture and ‘fruits & vegetables’. For each of these products, different supply chains, involving more or less transport activity and associated energy consumption are analysed in each country. The comparison highlights some of the main factors that influence GHG emissions for different supply chains and illustrates how they vary according to product and country of final distribution. In more detail, the paper addresses the main differences between the supply chains of these products namely, the origin of their sourcing, the logistical organisation between production and retail and different types of retail outlet. The origin of the sourcing impact is mainly related to distance. The impact of the logistical organisation between raw material and retail on GHG emissions is linked to the mode and vehicle choice and to the load factor. As for retail, the consumer trip emissions, between his home and the retail outlet, are also an important part of the whole supply chain emissions. It is worthwhile to notice that our goal in this project is to consider the whole supply chain, from production to consumption. Therefore a particular focus is put on the mobility behaviours of consumers purchasing the studied products during their shopping and dropping back home activities related to these products. Especially a web based survey has been conducted and the gathered results offer an opportunity for drawing a more detailed picture of the associated CO2 emissions. This paper uses the results of an ongoing research on supply chain energy efficiency, funded by ADEME (the French Energy Agency) through the French program on transport research (PREDIT). This research is based on a comprehensive review of the various approaches to quantifying the environmental impacts of supply chains together with data collection from a range of organisations including manufacturers, retailers and transport companies. We will first present the developed methodologies, then the results corresponding to each studied product will be described. A discussion of the potential application of the research approach to the wider debate about the environmental impact of freight transport and the scope for GHG emissions reduction targets to be achieved will be included.

Energy efficiency and greenhouse gas emissions of different supply chains: a comparison of French, UK and Belgian cases

Freight transportation system is critical to economic activity but it carries significant environmental costs, notably GHG emissions and climate change : energy use and corresponding CO2 emissions is increasing faster in freight transport than in other sectors and this increase is primarily the result of increased trade. This paper compares the transport activities, associated energy consumption and CO2 emissions of different supply chains for a range of products in three countries: Belgium, France and United Kingdom. Among the products considered are furniture and fruits & vegetables. For each of these products, different supply chains, involving more or less transport activity and associated energy consumption are analysed in each country. The comparison highlights some of the main factors that influence GHG emissions for different supply chains and illustrates how they vary according to product and country of final distribution. In more detail, the paper addresses the main differences between the supply chains of these products namely, the origin of their sourcing, the logistical organisation between production and retail and different types of retail outlet. The origin of the sourcing impact is mainly related to distance. The impact of the logistical organisation between raw material and retail on GHG emissions is linked to the mode and vehicle choice and to the load factor. As for retail, the consumer trip emissions, between his home and the retail outlet, are also an important part of the whole supply chain emissions. It is worthwhile to notice that our goal in this project is to consider the whole supply chain, from production to consumption. Therefore a particular focus is put on the mobility behaviours of consumers purchasing the studied products during their shopping and dropping back home activities related to these products. Especially a web based survey has been conducted and the gathered results offer an opportunity for drawing a more detailed picture of the associated CO2 emissions. This paper uses the results of an ongoing research on supply chain energy efficiency, funded by ADEME (the French Energy Agency) through the French program on transport research (PREDIT). This research is based on a comprehensive review of the various approaches to quantifying the environmental impacts of supply chains together with data collection from a range of organisations including manufacturers, retailers and transport companies. We will first present the developed methodologies, then the results corresponding to each studied product will be described. A discussion of the potential application of the research approach to the wider debate about the environmental impact of freight transport and the scope for GHG emissions reduction targets to be achieved will be included.

Energy efficiency analysis considering the use of an intelligent systems management in a smart home

In this abstract is presented an energy management system included in a SCADA system existent in a intelligent home. The system control the home energy resources according to the players definitions (electricity consumption and comfort levels), the electricity prices variation in real time mode and the DR events proposed by the aggregators.

SCADA House Intelligent Management for Energy Efficiency Analysis in Domestic Consumers

The implementation of smart homes allows the domestic consumer to be an active player in the context of the Smart Grid (SG). This paper presents an intelligent house management system that is being developed by the authors to manage, in real time, the power consumption, the micro generation system, the charge and discharge of the electric or plug-in hybrid vehicles, and the participation in Demand Response (DR) programs. The paper proposes a method for the energy efficiency analysis of a domestic consumer using the SCADA House Intelligent Management (SHIM) system. The main goal of the present paper is to demonstrate the economic benefits of the implemented method. The case study considers the consumption data of some real cases of Portuguese house consumption over 30 days of June of 2012, the Portuguese real energy price, the implementation of the power limits at different times of the day and the economic benefits analysis.

Smart meters as a tool for energy efficiency

Gradually smart grids and smart meters are closer to the home consumers. Several countries has developed studies focused in the impacts arising from the introduction of these technologies and one of the main advantages are related to energy efficiency, observed through the awareness of the population on behalf of a more efficient consumption. These benefits are felt directly by consumers through the savings on electricity bills and also by the concessionaires through the minimization of losses in transmission and distribution, system stability, smaller loading during peak hours, among others. In this article two projects that demonstrate the potential energy savings through smart meters and smart grids are presented. The first performed in Korea, focusing on the installation of smart meters and the impact of use of user interfaces. The second performed in Portugal, focusing on the control of loads in a residence with distributed generation.

Towards a better energy efficiency through a systems approach in an industrial forklift

The purpose of this study is to improve the potential energy recovery to electric energy in an electrohydraulic forklift system. The initial achieved result for energy saving ratio after structural optimization is 40 %. Component optimization is applied to the tested drive which consists of a DTC controlled electric servo motor directly running a reversible hydraulic pump. According to the study the energy efficiency and the energy recovery from the electro-hydraulic forklift system can be increased by 11 % units. New ideas and directions of further research were obtained during the study.

Effect of Improving Energy Efficiency on System Reliability

In the present scenario of energy demand overtaking energy supply top priority is given for energy conservation programs and policies. Most of the process plants are operated on continuous basis and consumes large quantities of energy. Efficient management of process system can lead to energy savings, improved process efficiency, lesser operating and maintenance cost, and greater environmental safety. Reliability and maintainability of the system are usually considered at the design stage and is dependent on the system configuration. However, with the growing need for energy conservation, most of the existing process systems are either modified or are in a state of modification with a view for improving energy efficiency. Often these modifications result in a change in system configuration there by affecting the system reliability. It is important that system modifications for improving energy efficiency should not be at the cost of reliability. Any new proposal for improving the energy efficiency of the process or equipments should prove itself to be economically feasible for gaining acceptance for implementation. In order to arrive at the economic feasibility of the new proposal, the general trend is to compare the benefits that can be derived over the lifetime as well as the operating and maintenance costs with the investment to be made. Quite often it happens that the reliability aspects (or loss due to unavailability) are not taken into consideration. Plant availability is a critical factor for the economic performance evaluation of any process plant.The focus of the present work is to study the effect of system modification for improving energy efficiency on system reliability. A generalized model for the valuation of process system incorporating reliability is developed, which is used as a tool for the analysis. It can provide an awareness of the potential performance improvements of the process system and can be used to arrive at the change in process system value resulting from system modification. The model also arrives at the pay back of the modified system by taking reliability aspects also into consideration. It is also used to study the effect of various operating parameters on system value. The concept of breakeven availability is introduced and an algorithm for allocation of component reliabilities of the modified process system based on the breakeven system availability is also developed. The model was applied to various industrial situations.

A multicriteria lifespan energy efficiency approach to intelligent building assessment

This paper presents a multicriteria decision-making model for lifespan energy efficiency assessment of intelligent buildings (IBs). The decision-making model called IBAssessor is developed using an analytic network process (ANP) method and a set of lifespan performance indicators for IBs selected by a new quantitative approach called energy-time consumption index (ETI). In order to improve the quality of decision-making, the authors of this paper make use of previous research achievements including a lifespan sustainable business model, the Asian IB Index, and a number of relevant publications. Practitioners can use the IBAssessor ANP model at different stages of an IB lifespan for either engineering or business oriented assessments. Finally, this paper presents an experimental case study to demonstrate how to use IBAssessor ANP model to solve real-world design tasks.