Design and fabrication of linear pixel arrays for organic photovoltaic modules to achieve scalable power output

We describe a design and fabrication method to enable simpler manufacturing of more efficient organic solar cell modules using a modified flat panel deposition technique. Many mini-cell pixels are individually connected to each other in parallel forming a macro-scale solar cell array. The pixel size of each array is optimized through experimentation to maximize the efficiency of the whole array. We demonstrate that integrated organic solar cell modules with a scalable current output can be fabricated in this fashion and can also be connected in series to generate a scalable voltage output.

Optimization of organic solar cells with thin film Au as anode

Optical transmittance and conductivity for thin metallic films, such as Au, are two inversely related and extremely important parameters for its application in organic photovoltaics as the front electrode. We report our findings on how these parameters have been optimized to attain maximum possible efficiencies by fabricating organic solar cells with thin Au film anodes of differing optical transmittances and consequently due to scaling at the nanolevel, varying electrical conductivities. There was an extraordinary improvement in the overall solar cell efficiency (to the order of 49%) when the Au thin film transmittance was increased from 38% to 54%. Surface morphologies of these thin films also have an effect on the critical parameters including, Voc, Jsc and FF.

Veden ja järvisedimenttien laatu Vihtamonjoen valuma-alueella Sotkamossa

The study area, Vihtamonjoki catchment area, is 55 square kilometres and a third of it has been ditched. The largest ditchings have been done in years 1959-1970. The water system in the catchment area builds up of several lake basins, brooks and rivers. This study tries to discover the water quality at present. It also tries to determine the sedimentation rate and the changes on the sediment quality during the past decades. The water samples were collected in August 2003 and in March 2004 from several places in the catchment area. On March 2004 the sediment samples were collected from four lake basins. Organic matter, total phosphorus, iron, manganese, Fe/Mn-ratio, zinc and copper were determined from sediment samples. The water quality was determined by electric conductivity, alkalinity, pH, oxygen content and the content of sodium, potassium, magnesium, calcium, sulphate, chlorine and fluoride. Also the nutrients, nitrate, ammonium and phosphate, were determined. Chemical analyses and loss on ignition analyses showed clear changes in sediment quality in samples taken from 15-25 cm depth, thus showing the time of the ditching. In most cases the forest ditching had caused increase in mineral matter, iron, zinc and copper and decrease in total phosphorus and organic matter. Sedimentation rates vary between 4,1 to 6,7 mm/year in lakes after the forest ditching. Sedimentation rates have probably increased due to the forest ditching. The Fe/Mn-ratio shows that there has been a lack of oxygen in the lakes for some years after the forest ditching. The water quality proved to be normal in the Vihtamonjoki catchment area. Oxygen content in March 2004 pointed to the conclusion that there might be lack of oxygen in winter. Other analysis showed the water quality to be typical for the Kainuu area.

Study of electrical conduction in polypyrrole by varying the doping level

Electrical conductivity and thermopower are studied in the conducting polymer polypyrrole doped with varying levels of the dopant hexafluoro phosphate (PF6). A single sample is prepared by galvanostatic electrochemical polymerization at -40 degreesC. From this sample, six samples having different dopant levels and correspondingly different conductivity are prepared by dedoping. Low temperature d.c. electrical conductivity measurement shows the metal-insulator transition from fully doped sample to dedoped samples. On the metallic side the data are fitted to the localization-interaction model. In critical regime, it follows the power law. On the insulating side, it is variable range hopping. Thermopower measurements are done in the temperature range 300 K to 20 K. Thermopower is linear for samples on the metallic side and becomes more and more non-linear on the insulating side. It is described using a combination of the linear metallic term and the non-linear hopping term. (C) 2002 Elsevier Science B.V. All rights reserved.

Effect of Manganese (II) Oxide on microstructure and ionic transport properties of nanostructured cubic zirconia

Effect of MnO addition on microstructure and ionic transport properties of nanocrystalline cubic(c)-ZrO2 is reported. Monoclinic (m) ZrO2 powders with 10-30 mol% MnO powder are mechanically alloyed in a planetary ball mill at room temperature for 10 h and annealed at 550 degrees C for 6 h. In all compositions m-ZrO2 transforms completely to nanocrystalline c-ZrO2 phase and MnO is fully incorporated into c-ZrO2 lattice. Rietveld's refinement technique is employed for detailed microstructure analysis by analyzing XRD patterns. High resolution transmission electron microscopy (HRTEM) analysis confirms the complete formation of c-ZrO2 phase. Presence of stoichiometric Mn in c-ZrO2 powder is confirmed by Electron Probe Microscopy analysis. XPS analysis reveals that Mn is mostly in Mn2+ oxidation state. A correlation between lattice parameter and oxygen vacancy is established. A detailed ionic conductivity measurement in the 250 degrees-575 degrees C temperature range describes the effect of MnO on conductivity of c-ZrO2. The ionic conductivity (s) of 30 mol% MnO alloyed ZrO2 at 550 degrees C is 0.04 s cm(-1). Electrical relaxation studies are carried out by impedance and modulus spectroscopy. Relaxation frequency is found to increase with temperature and MnO mol fraction. Electrical characterization predicts that these compounds have potentials for use as solid oxide fuel cell electrolyte material. (C) 2015 Elsevier Ltd. All rights reserved.

Desempenho de tanques vegetados em um ecossistema engenheirado para tratamento descentralizado de esgotos domiciliares na Ilha Grande, RJ

A falta de infraestrutura adequada para a coleta e o tratamento de esgotos atinge várias comunidades costeiras e de sistemas insulares do Estado do Rio de Janeiro, que vivem em condições de insalubridade. O objetivo do presente estudo foi avaliar o desempenho de um ecossistema engenheirado para tratamento descentralizado de esgoto domiciliar implantado no Centro de Estudos Ambientais e Desenvolvimento Sustentável (CEADS) da UERJ, na Vila Dois Rios, Ilha Grande - RJ, com ênfase na contribuição de macrófitas e algas em tanques vegetados como tratamento terciário para a melhoria geral da qualidade do efluente e em especial, para remoção de nutrientes. O sistema é composto por caixa controladora de vazão, caixa de gordura, fossa séptica, filtro aerado submerso, decantador secundário e o conjunto de tanques vegetados contendo as macrófitas aquáticas Eichhornia crassipes, Schoenoplectus sp., Panicum cf. racemosum + Cyperus ligularis, além de um tanque de algas entre as 2 primeiras macrófitas. Os principais parâmetros monitorados em amostras quinzenais obtidas durante o período de 09/2009 a 07/2010 em 10 pontos de coleta equivalentes à saída do efluente de cada unidade de tratamento foram: OD, pH, Cond. Elétrica, Temperatura, DBO5, DQO, SST, SDT, Nitrogênio amoniacal, Nitrito, Nitrato e Fósforo total. A vazão média do sistema foi 52 L/h. A produção primária de biomassa das macrófitas e o metabolismo no tanque com algas também foram estimados. A eficiência média do ecossistema engenheirado foi de 93% de redução dos SST, 93% de DBO, 90% da DQO, 30% de N amoniacal e, 38% de Fósforo. O conjunto de tanques vegetados promoveu um aumento médio de oxigênio dissolvido (OD) em 182% comparados ao valor de saída do decantador. Pode-se concluir que esse sistema contribuiu para uma melhoria geral da qualidade do efluente final com relação a praticamente todos os parâmetros, ainda que em alguns casos, apenas de forma incremental. Houve maior produção média de biomassa (peso seco.dia-1) e retenção média de água na espécie E. crassipes (aguapé) em comparação com as espécies Schoenoplectus sp, P. cf. racemosum e C. ligularis. A baixa produção primária no tanque de algas em relação à respiração, pelo menos no período monitorado, indica condições desfavoráveis à remoção de nutrientes (N e P) nesse tanque através da incorporação na biomassa. Uma investigação mais detalhada acerca dos parâmetros de projeto que inclua um eventual redimensionamento do decantador e do tanque de algas é sugerida.

Avaliação sazonal do grau de trofia em reservatórios do complexo hidrelétrico de Ribeirão das Lajes (Rio de Janeiro)

Com a demanda por energia elétrica nos dias atuais e a grande quantidade de bacias hidrográficas presentes no Brasil, a geração de energia hidrelétrica se tornou a principal forma de suprimento. Dentre as diversas mudanças ocorridas em represamento de rios, a redução na vazão da água influencia no acúmulo de nutrientes afetando diretamente na qualidade da água, podendo acarretar em um processo denominado eutrofização, caracterizado pelo aumento na quantidade de nutrientes em um sistema e contribuindo para o desenvolvimento de produtores primários (fitoplâncton e macrófitas aquáticas) em níveis acima do crescimento natural. Para identificar o estado de trofia dos reservatórios pertencentes ao Complexo Hidrelétrico de Ribeirão das Lajes (RJ) foi utilizada a metodologia de Lu e Lo (2002) de avaliação trófica fuzzy (ou difusa) sintética e não sintética, além da avaliação trófica através do índice de estado trófico de Carlson (1977). As classes de estado trófico utilizadas na metodologia é da OECD (1982) e utiliza transparência, concentrações de fósforo total e de clorofila-a como variáveis. Outras variáveis limnológicas como temperatura, oxigênio dissolvido, condutividade elétrica, turbidez, pH e sólidos dissolvidos totais foram utilizadas para caracterização dos reservatórios. As coletas foram realizadas em três momentos, no período seco de 2011, no período chuvoso de 2012 e no período seco de 2012. As análises fuzzy não sintéticas apontaram os reservatórios de Santana, Vigário e Ponte Coberta como oligotrófico/eutrófico durante o período de estudo. O reservatório de Ribeirão das Lajes foi classificado como oligotrófico nos períodos secos no ano de 2011 e 2012, e como mesotrófico no período chuvoso de 2012, assim como o reservatório de Tocos. Foram observadas diferenças significativas entre o período seco e o chuvoso em relação às concentrações de clorofila-a, transparência e turbidez, demonstrando influência sazonal no grau de trofia dos reservatórios, uma vez que clorofila-a e transparência são variáveis utilizadas em índices de estado trófico

Electrical transport in metallic films

On the basis of the Boltzmann equation, the authors propose a model that includes scattering from both film surfaces and grain boundaries, and have studied the quasiclassical electrical transport in metallic films. The in-plane electric conductivity of metallic films is obtained, and the theoretical results are shown to be in good agreement with experimental data. We also give the relation between temperature coefficient of resistivity and thickness of metallic films and make a comparison with experiment. <(C)> 2004 American Institute of Physics.

Influência de um extrato aquoso de Coriandrum sativum na marcação in vitro de constituintes sanguíneos com tecnécio-99m e de sua associação com vibração gerada por plataforma oscilante na biodistribuição do radiofármaco Na99mTcO4 e na concentração de biomarcadores em ratos Wistar

Coriandrum sativum, conhecido popularmente como coentro, é um vegetal usado na alimentação humana. Também é utilizado como planta medicinal para tratamento de diabetes, complicações gastrintestinais, e como um antiedêmico, antisséptico e emenagogo. Em investigações acerca dos efeitos do extrato de plantas, é importante a determinação de alguns parâmetros físico-químicos. Diversos modelos experimentais têm sido usados, inclusive com o emprego de radionuclídeos. Em procedimentos da Medicina Nuclear que auxiliam o diagnóstico de doenças, o tecnécio-99m (99mTc) é o radionuclídeo mais utilizado. Hemácias marcadas com 99mTc estão entre as várias estruturas celulares que podem ser marcadas com este radionuclídeo e usadas como radiofármaco. Para a marcação com 99mTc é necessária a presença de um agente redutor, e o mais utilizado é o cloreto estanoso (SnCl2). As terapias com drogas e condições de dieta além de doenças podem alterar a marcação de constituintes sanguíneos, bem como a biodistribuição de diferentes radiofármacos. A exposição às vibrações geradas por plataforma oscilatória produz exercícios de corpo inteiro. O objetivo deste estudo foi caracterizar a preparação de um extrato do Coriandrum sativum, através de parâmetros físico-químicos, verificar os efeitos desse produto natural na radiomarcação de constituintes sanguíneos e em associação à vibração gerada pela plataforma na biodistribuição de Na99mTcO4 e na concentração de alguns biomarcadores. O extrato de coentro teve a o pico de absorbância em 480 nm. O extrato de coentro foi inversamente correlacionado com a concentração na condutividade elétrica. Foi encontrado o maior valor de pH na menor concentração do extrato (0,5 mg/mL). Não houve uma alteração significativa na marcação de constituintes sanguíneos com 99mTc. E a associação do extrato de coentro e vibração gerada por plataforma com frequência de 12 Hz teve efeito no baço, como observado na fixação do radiofármaco nesse órgão e ação em alguns órgãos alternando a concentração de alguns biomarcadores. Em conclusão, parâmetros físico-químicos podem ser úteis para caracterizar o extrato estudado. Provavelmente, as propriedades redox associadas com substâncias desse extrato podem ser os responsáveis pela ausência do efeito na radiomarcação de constituintes sanguíneos. A determinação da captação do Na99mTcO4 em diferentes órgãos permite verificar que o extrato de coentro sozinho não foi capaz de interferir na biodistribuição do radiofármaco. Contudo o tratamento de animais com vibração gerada pela plataforma alterou significativamente a fixação do pertecnetato de sódio no baço e a concentração do colesterol, triglicerídeo, CK e bilirrubina.

The vertical microdistribution of cyanobacteria and green algae within desert crusts and the development of the algal crusts

Substantial amounts of algal crusts were collected from five different desert experimental sites aged 42, 34, 17, 8 and 4 years, respectively, at Shapotou ( China) and analyzed at a 0.1 mm microscale of depth. It was found that the vertical distribution of cyanobacteria and microalgae in the crusts was distinctly laminated into an inorganic-layer (ca. 0.00 - 0.02 mm, with few algae), an algae-dense-layer ( ca. 0.02 - 1.0 mm) and an algae-sparse-layer ( ca. 1.0 - 5.0 mm). It was interesting to note that in all crusts Scytonema javanicum Born et Flah ( or Nostoc sp., cyanobacterium), Desmococcus olivaceus (Pers ex Ach., green alga) Laundon and Microcoleus vaginatus Gom. ( cyanobacterium) dominated at the depth of 0.02 - 0.05, 0.05 - 0.1 and 0.1 - 1.0 mm, respectively, from the surface. Phormidium tenue Gom. ( or Lyngbya cryptovaginatus Schk., cyanobacterium) and Navicula cryptocephala Kutz.( or Hantzschia amphioxys (Ehr.) Grun. and N. cryptocephala together, diatom) dominated at the depth of 1.0 - 3.0 and 3.5 - 4.0 mm, respectively, of the crusts from the 42 and 34 year old sites. It was apparent that in more developed crusts there were more green algae and the niches of Nostoc sp., Chlorella vulgaris Beij., M. vaginatus, N. cryptocephala and fungi were nearer to the surface. If lichens and mosses accounted for less than 41.5% of the crust surface, algal biovolume was bigger when the crust was older, but the opposite was true when the cryptogams other than algae covered more than 70%. In addition to detailed species composition and biovolume, analyses of soil physicochemical properties, micromorphologies and mineral components were also performed. It was found that the concentration of organic matter and nutrients, electric conductivity, silt, clay, secondary minerals were higher and there were more micro-beddings in the older crusts than the less developed ones. Possible mechanisms for the algal vertical microdistribtion at different stages and the impact of soil topography on crust development are discussed. It is concluded that biomethods ( such as fine species distribution and biovolume) were more precise than mineralogical approaches in judging algal crust development and thus could be a better means to measure the potentiality of algal crusts in desert amelioration.

Preparation and characterization of Si sheets by renewed SSP technique

Silicon sheets from powder (SSP) ribbons have been prepared by modified SSP technique using electronic-grade (9N purity) silicon powder. The surface morphology, crystallographic quality, composition and electric properties of the SSP ribbons were investigated by surface profiler, X-ray diffraction (XRD), scanning electron microscopy (SEM), metallurgical microscope, Auger electron spectroscopy (AES) and four-point probe apparatus, respectively. The results show that the SSP ribbon made from electronic-grade silicon powder is a suitable candidate for the substrates of crystalline silicon thin film (CSiTF) solar cells, which could meet the primary requirements of CSiTF solar cell process on the substrates, including surface smoothness, crystallographic quality, purity and electric conductivity, etc. (C) 2004 Elsevier B.V. All rights reserved.

Electrospun palladium nanoparticle-loaded carbon nanofibers and their electrocatalytic activities towards hydrogen peroxide and NADH

Palladium nanoparticle-loaded carbon nanofibers (Pd/CNFs) were synthesized by the combination of electrospinning and thermal treatment processes. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images show that spherical Pd nanoparticles (NPs) are well-dispersed on the surfaces of CNFs or embedded in CNFs. X-ray diffraction (XRD) pattern indicates that cubic phase of Pd was formed during the reduction and carbonization processes, and the presence of Pd NPs promoted the graphitization of CNFs. This nanocomposite material exhibited high electric conductivity and accelerated the electron transfer, as verified by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV).

Photochemical synthesis, properties and X-ray crystal structure of tetrabutylammonium dodecamolybdophosphate heteropoly blue

The title heteropoly blue, (Bu4N)(6)H-10 [(PMo11MoO40)-Mo-VI-O-V](4) . H2O has been photochemically synthesized and characterized with elemental analysis, solid diffusion reflectance electronic spectra, CV, ESR, XPS, IR spectra, conductivity measurement and X-ray single crystal analysis. The crystallographic data for C96H218Mo48N6O169P4 are as follows: M-r = 8889.76, triclinic, P (1) over bar, a = 1.4142 (3) nm, b = 2.6027 (5) nm, c = 2.6403(5) nm, alpha = 113.96(3)degrees, beta = 90.05(3)degrees, gamma = 105.71(3)degrees, V = 8.481 (3) nm(3), Z = 1, D-c = 1.741 g/cm(3), F (000) = 4264, mu = 1.798 mm(-1). The X-ray crystal structure analysis reveals that there Is one independent molecule in the unit cell of the title heteropoly blue which contains four mixed-valence heteropoly anions, six tetrabutylammonium cations and one water molecule. Its molecular structure possesses a centrosymmetrical arrangement in the unit cell. The phosphorus atom is In the crystallographic inversion center of the heteropoly anion and the eight oxygen atoms surrounding central phosphorus atom comprise of a distorted hexahedron. Heteropolyanion has two equal sets of PO4 tetrahedron. The PO4 tetrahedron and the MoO6 octahedron in the polyanion are greatly distorted.

Thermal, mechanical and ionic conductive behaviour of gamma-radiation induced PEO/PVDF(SIN)-LiClO4 polymer electrolyte system

An effort has been made to modify the mechanical behaviour of our previously reported gel-type gamma-radiation crosslinked polyethylene oxide (PEO)-LiClO4 polymer electrolyte. A highly polar and gamma-radiation crosslinkable crystalline polymer, polyvinylidene fluoride (PVDF), was selected to blend with PEO and then subjected to gamma-irradiation in order to make an simultaneous interpenetrating network (SIN), which was used as a polymer host to impart stiffness to the plasticized system. Experimental results have shown that the presence of PVDF in the system, through gamma-radiation induced SIN formation, could not only give a rather high mechanical modulus of 10(7) Pa at ambient temperature, but also maintain the room temperature ionic conductivity at a high level (greater than 10(-4) S/cm). DSC, DMA and conductivity measurement techniques were used to examine the effects of blending, gamma-irradiation and plasticization on the variations of glass transition and melting endotherm, on the appearance of high elastic plateau and on the temperature dependence of ionic conductivity: In addition, it was found that, in contrast with the unplasticized system, the ionic conductivity mechanism of this gel-type electrolyte seems to conform to the Arrhenius model, suggesting that, as a result of the high degree of plasticization, the polymer chains act mainly as the skeleton of the networks or polymer cages to immobilize the liquid electrolyte solution, whereas the ionic species migrate as if they were in a liquid medium. (C) 1997 Elsevier Science Ltd.