Interagency collaboration between child protection and mental health services: Practices, attitudes and barriers

Objective: The aim of this paper is to examine some of the factors that facilitate and hinder interagency collaboration between child protection services and mental health services in cases where there is a parent with a mental illness and there are protection concerns for the child(ren). The paper reports on agency practices, worker attitudes and experiences, and barriers to effective collaboration. Method: A self-administered, cross-sectional survey was developed and distributed via direct mail or via line supervisors to workers in statutory child protection services, adult mental health services, child and youth mental health services, and Suspected Child Abuse and Neglect (SCAN) Teams. There were 232 completed questionnaires returned, with an overall response rate of 21%. Thirty-eight percent of respondents were statutory child protection workers. 39% were adult mental health workers, 16% were child and youth mental health workers, and 4% were SCAN Team medical officers (with 3% missing data). Results: Analysis revealed that workers were engaging in a moderate amount of interagency contact, but that they were unhappy with the support provided by their agency. Principle components analysis and multivariate analysis of variance (MANOVA) on items assessing attitudes toward other workers identified four factors, which differed in rates of endorsement: inadequate training, positive regard for child protection workers, positive regard for mental health workers, and mutual mistrust (from highest to lowest level of endorsement). The same procedure identified the relative endorsement of five factors extracted from items about potential barriers: inadequate resources, confidentiality, gaps in interagency processes, unrealistic expectations, and professional knowledge domains and boundaries. Conclusions: Mental health and child protection professionals believe that collaborative practice is necessary; however, their efforts are hindered by a lack of supportive structures and practices at the organizational level. (c) 2005 Published by Elsevier Ltd.

Strain distributionand electronic property modifications in Si/Ge axial nanowires hetrostructures

Molecular dynamics simulations were carried out for Si/Ge axial nanowire heterostructures using modified effective atom method (MEAM) potentials. A Si–Ge MEAM interatomic cross potential was developed based on available experimental data and was used for these studies. The atomic distortions and strain distributions near the Si/Ge interfaces are predicted for nanowires with their axes oriented along the [111] direction. The cases of 10 and 25 nm diameter Si/Ge biwires and of 25 nm diameter Si/Ge/Si axial heterostructures with the Ge disk 1 nm thick were studied. Substantial distortions in the height of the atoms adjacent to the interface were found for the biwires but not for the Ge disks. Strains as high as 3.5% were found for the Ge disk and values of 2%–2.5% were found at the Si and Ge interfacial layers in the biwires. Deformation potential theory was used to estimate the influence of the strains on the band gap, and reductions in band gap to as small as 40% of bulk values are predicted for the Ge disks. The localized regions of increased strain and resulting energy minima were also found within the Si/Ge biwire interfaces with the larger effects on the Ge side of the interface. The regions of strain maxima near and within the interfaces are anticipated to be useful for tailoring band gaps and producing quantum confinement of carriers. These results suggest that nanowire heterostructures provide greater design flexibility in band structure modification than is possible with planar layer growth.

Femtosecond laser microstructuring through optical fibre end faces:inscription of surface gratings and sub-surface splitters

We present the results of femtosecond laser microstructuring of optical fibres by direct access of the fibre end face, both at the surface and several hundred microns into the fibre, to realise one-and two-dimensional grating structures and optical fibre splitters, respectively. We show the versatility of this simple but effective inscription method, where we demonstrate classic multiple slit diffraction patterns and show the potential for coarse wavelength division multiplexing for sensor signals. A key advantage for the fibre splitter is that the inscription method avoids the use of oil immersion that compensate for the fibre curvature in the standard side writing method. © 2012 SPIE.

New oil modified acrylic polymer for pH sensitive drug release:experimental results and statistical analysis

We report results of an experimental study, complemented by detailed statistical analysis of the experimental data, on the development of a more effective control method of drug delivery using a pH sensitive acrylic polymer. New copolymers based on acrylic acid and fatty acid are constructed from dodecyl castor oil and a tercopolymer based on methyl methacrylate, acrylic acid and acryl amide were prepared using this new approach. Water swelling characteristics of fatty acid, acrylic acid copolymer and tercopolymer respectively in acid and alkali solutions have been studied by a step-change method. The antibiotic drug cephalosporin and paracetamol have also been incorporated into the polymer blend through dissolution with the release of the antibiotic drug being evaluated in bacterial stain media and buffer solution. Our results show that the rate of release of paracetamol getss affected by the pH factor and also by the nature of polymer blend. Our experimental data have later been statistically analyzed to quantify the precise nature of polymer decay rates on the pH density of the relevant polymer solvents. The time evolution of the polymer decay rates indicate a marked transition from a linear to a strictly non-linear regime depending on the whether the chosen sample is a general copolymer (linear) or a tercopolymer (non-linear). Non-linear data extrapolation techniques have been used to make probabilistic predictions about the variation in weight percentages of retained polymers at all future times, thereby quantifying the degree of efficacy of the new method of drug delivery.

New Knowledge Obtaining in Structural-predicate Models of Knowledge

An effective mathematical method of new knowledge obtaining on the structure of complex objects with required properties is developed. The method comprehensively takes into account information on the properties and relations of primary objects, composing the complex objects. It is based on measurement of distances between the predicate groups with some interpretation of them. The optimal measure for measurement of these distances with the maximal discernibleness of different groups of predicates is constructed. The method is tested on solution of the problem of obtaining of new compound with electro-optical properties.

Fourth generation evaluation revisited: Testing a revised pause model

This research provides data which investigates the feasibility of using fourth generation evaluation during the process of instruction. A semester length course entitled "Multicultural Communications", (PUR 5406/4934) was designed and used in this study, in response to the need for the communications profession to produce well-trained culturally sensitive practitioners for the work force and the market place. A revised pause model consisting of three one-on-one indepth interviews conducted outside of the class, three reflections periods during the class and a self-reflective essay prepared one week before the end of the course was analyzed. Narrative and graphic summaries of participant responses produced significant results. The revised pause model was found to be an effective evaluation method for use in multicultural education under certain conditions as perceived by the participants in the study. participant self-perceived behavior change and knowledge acquisition was identified through use of the revised pause model. Study results suggest that by using the revised pause model of evaluation, instructors teaching multicultural education in schools of journalism and mass communication is yet another way of enhancing their ability to become both the researcher and the research subject. In addition, the introduction of a qualitative model has been found to be a more useful way of generating participant involvement and introspection. Finally, the instructional design of the course used in the study provides communication educators with a practical way of preparing their students be effective communicators in a multicultural world.

Guia didático-metodológico para aprendizagem e memorização dos conhecimentos disseminados nos moocs – Massive Open Online Courses

The present research has character exploratory, bibliographic and qualitative. It is based in consolidated scientific arguments in cognitive theories inspired in constructivist method and, under this perspective proposes to develop a didactic guide oriented to students of courses MOOCs - Massive Open Online Courses that will make it possible to maximize the utilization and the assimilation of the knowledge available in these courses. Intends also prepare these students in practice of a methodology of storage that enables the knowledge acquired are not lost nor be forgotten over the course of time. The theoretical framework, based on the theories of Meaningful Learning (Ausubel), the Genetic Epistemology (Piaget), Socioconstructivist (Vigotsky) and the Multimedia Learning (Mayer), subsidizes the understanding of important concepts such as meaningful learning, previous knowledge, and conceptual maps. Supported by fundamental contribution of the Theory of Categories, which are inter-related to concepts applicable to teaching methodology supported by use of structured knowledge maps in the establishment of the binomial teaching-learning; and with valuable study performed by teachers Luciano Lima (UFU) and Rubens Barbosa Filho (UEMS) that culminated with the development of Exponential Effective Memorization Method in Binary Base (Double MEB).

Molecular docking and geographical information systems as tools to assess the potential impact of veterinary medicines on non-target organisms and the environment

Veterinary medicines (VMs) from agricultural industry can enter the environment in a number of ways. This includes direct exposure through aquaculture, accidental spillage and disposal, and indirect entry by leaching from manure or runoff after treatment. Many compounds used in animal treatments have ecotoxic properties that may have chronic or sometimes lethal effects when they come into contact with non-target organisms. VMs enter the environment in mixtures, potentially having additive effects. Traditional ecotoxicology tests are used to determine the lethal and sometimes reproductive effects on freshwater and terrestrial organisms. However, organisms used in ecotoxicology tests can be unrepresentative of the populations that are likely to be exposed to the compound in the environment. Most often the tests are on single compound toxicity but mixture effects may be significant and should be included in ecotoxicology testing. This work investigates the use, measured environmental concentrations (MECs) and potential impact of sea lice treatments on salmon farms in Scotland. Alternative methods for ecotoxicology testing including mixture toxicity, and the use of in silico techniques to predict the chronic impact of VMs on different species of aquatic organisms were also investigated. The Scottish Environmental Protection Agency (SEPA) provided information on the use of five sea lice treatments from 2008-2011 on Scottish salmon farms. This information was combined with the recently available data on sediment MECs for the years 2009-2012 provided by SEPA using ArcGIS 10.1. In depth analysis of this data showed that from a total of 55 sites, 30 sites had a MEC higher than the maximum allowable concentration (MAC) as set out by SEPA for emamectin benzoate and 7 sites had a higher MEC than MAC for teflubenzuron. A number of sites that were up to 16 km away from the nearest salmon farm reported as using either emamectin benzoate or teflubenzuron measured positive for the two treatments. There was no relationship between current direction and the distribution of the sea lice treatments, nor was there any evidence for alternative sources of the compounds e.g. land treatments. The sites that had MECs higher than the MAC could pose a risk to non-target organisms and disrupt the species dynamics of the area. There was evidence that some marine protected sites might be at risk of exposure to these compounds. To complement this work, effects on acute mixture toxicity of the 5 sea lice treatments, plus one major metabolite 3-phenoxybenzoic acid (3PBA), were measured using an assay using the bioluminescent bacteria Aliivibrio fischeri. When exposed to the 5 sea lice treatments and 3PBA A. fischeri showed a response to 3PBA, emamectin benzoate and azamethiphos as well as combinations of the three. In order to establish any additive effect of the sea lice treatments, the efficacy of two mixture prediction equations, concentration addition (CA) and independent action ii(IA) were tested using the results from single compound dose response curves. In this instance IA was the more effective prediction method with a linear regression confidence interval of 82.6% compared with 22.6% of CA. In silico molecular docking was carried out to predict the chronic effects of 15 VMs (including the five used as sea lice control). Molecular docking has been proposed as an alternative screening method for the chronic effects of large animal treatments on non-target organisms. Oestrogen receptor alpha (ERα) of 7 non-target bony fish and the African clawed frog Xenopus laevis were modelled using SwissModel. These models were then ‘docked’ to oestradiol, the synthetic oestrogen ethinylestradiol, two known xenoestrogens dichlorodiphenyltrichloroethane (DDT) and bisphenol A (BPA), the antioestrogen breast cancer treatment tamoxifen and 15 VMs using Auto Dock 4. Based on the results of this work, four VMs were identified as being possible xenoestrogens or anti-oestrogens; these were cypermethrin, deltamethrin, fenbendazole and teflubenzuron. Further investigation, using in vitro assays, into these four VMs has been suggested as future work. A modified recombinant yeast oestrogen screen (YES) was attempted using the cDNA of the ERα of the zebrafish Danio rerio and the rainbow trout Oncorhynchus mykiss. Due to time and difficulties in cloning protocols this work was unable to be completed. Use of such in vitro assays would allow for further investigation of the highlighted VMs into their oestrogenic potential. In conclusion, VMs used as sea lice treatments, such as teflubenzuron and emamectin benzoate may be more persistent and have a wider range in the environment than previously thought. Mixtures of sea lice treatments have been found to persist together in the environment, and effects of these mixtures on the bacteria A. fischeri can be predicted using the IA equation. Finally, molecular docking may be a suitable tool to predict chronic endocrine disrupting effects and identify varying degrees of impact on the ERα of nine species of aquatic organisms.

Physical and chemical kinetics of structural build-up of cement suspensions

Abstract : The structural build-up of fresh cement-based materials has a great impact on their structural performance after casting. Accordingly, the mixture design should be tailored to adapt the kinetics of build-up given the application on hand. The rate of structural build-up of cement-based suspensions at rest is a complex phenomenon affected by both physical and chemical structuration processes. The structuration kinetics are strongly dependent on the mixture’s composition, testing parameters, as well as the shear history. Accurate measurements of build-up rely on the efficiency of the applied pre-shear regime to achieve an initial well-dispersed state as well as the applied stress during the liquid-solid transition. Studying the physical and chemical mechanisms of build-up of cement suspensions at rest can enhance the fundamental understanding of this phenomenon. This can, therefore, allow a better control of the rheological and time-dependent properties of cement-based materials. The research focused on the use of dynamic rheology in investigating the kinetics of structural build-up of fresh cement pastes. The research program was conducted in three different phases. The first phase was devoted to evaluating the dispersing efficiency of various disruptive shear techniques. The investigated shearing profiles included rotational, oscillatory, and combination of both. The initial and final states of suspension’s structure, before and after disruption, were determined by applying a small-amplitude oscillatory shear (SAOS). The difference between the viscoelastic values before and after disruption was used to express the degree of dispersion. An efficient technique to disperse concentrated cement suspensions was developed. The second phase aimed to establish a rheometric approach to dissociate and monitor the individual physical and chemical mechanisms of build-up of cement paste. In this regard, the non-destructive dynamic rheometry was used to investigate the evolutions of both storage modulus and phase angle of inert calcium carbonate and cement suspensions. Two independent build-up indices were proposed. The structural build-up of various cement suspensions made with different cement contents, silica fume replacement percentages, and high-range water reducer dosages was evaluated using the proposed indices. These indices were then compared to the well-known thixotropic index (Athix.). Furthermore, the proposed indices were correlated to the decay in lateral pressure determined for various cement pastes cast in a pressure column. The proposed pre-shearing protocol and build-up indices (phases 1 and 2) were then used to investigate the effect of mixture’s parameters on the kinetics of structural build-up in phase 3. The investigated mixture’s parameters included cement content and fineness, alkali sulfate content, and temperature of cement suspension. Zeta potential, calorimetric, spectrometric measurements were performed to explore the corresponding microstructural changes in cement suspensions, such as inter-particle cohesion, rate of Brownian flocculation, and nucleation rate. A model linking the build-up indices and the microstructural characteristics was developed to predict the build-up behaviour of cement-based suspensions The obtained results showed that oscillatory shear may have a greater effect on dispersing concentrated cement suspension than the rotational shear. Furthermore, the increase in induced shear strain was found to enhance the breakdown of suspension’s structure until a critical point, after which thickening effects dominate. An effective dispersing method is then proposed. This consists of applying a rotational shear around the transitional value between the linear and non-linear variations of the apparent viscosity with shear rate, followed by an oscillatory shear at the crossover shear strain and high angular frequency of 100 rad/s. Investigating the evolutions of viscoelastic properties of inert calcite-based and cement suspensions and allowed establishing two independent build-up indices. The first one (the percolation time) can represent the rest time needed to form the elastic network. On the other hand, the second one (rigidification rate) can describe the increase in stress-bearing capacity of formed network due to cement hydration. In addition, results showed that combining the percolation time and the rigidification rate can provide deeper insight into the structuration process of cement suspensions. Furthermore, these indices were found to be well-correlated to the decay in the lateral pressure of cement suspensions. The variations of proposed build-up indices with mixture’s parameters showed that the percolation time is most likely controlled by the frequency of Brownian collisions, distance between dispersed particles, and intensity of cohesion between cement particles. On the other hand, a higher rigidification rate can be secured by increasing the number of contact points per unit volume of paste, nucleation rate of cement hydrates, and intensity of inter-particle cohesion.

Multirobot Tethering for Localization and Control

Particle filtering has proven to be an effective localization method for wheeled autonomous vehicles. For a given map, a sensor model, and observations, occasions arise where the vehicle could equally likely be in many locations of the map. Because particle filtering algorithms may generate low confidence pose estimates under these conditions, more robust localization strategies are required to produce reliable pose estimates. This becomes more critical if the state estimate is an integral part of system control. We investigate the use of particle filter estimation techniques on a hovercraft vehicle. The marginally stable dynamics of a hovercraft require reliable state estimates for proper stability and control. We use the Monte Carlo localization method, which implements a particle filter in a recursive state estimate algorithm. An H-infinity controller, designed to accommodate the latency inherent in our state estimation, provides stability and controllability to the hovercraft. In order to eliminate the low confidence estimates produced in certain environments, a multirobot system is designed to introduce mobile environment features. By tracking and controlling the secondary robot, we can position the mobile feature throughout the environment to ensure a high confidence estimate, thus maintaining stability in the system. A laser rangefinder is the sensor the hovercraft uses to track the secondary robot, observe the environment, and facilitate successful localization and stability in motion.

Protemic characterization of peripheral blood mononuclear cells

Peripheral blood mononuclear cells (PBMCs) play quite diverse and important roles in monitoring immune homeostasis. Thus, these subset of blood cells may provide access to potential physiological relevant biomolecules, namely proteins. For this reason, PBMCs represent a promising biological sample in scientific research, particularly as a source of potential biological markers discovery of the most diverse diseases. Prior studies of proteomic characterization of PBMCs from healthy individuals lack either the identification of a large number of proteins or its quantification in a way that is compatible with the search of potential biomarker candidates. Therefore, this study aimed to provide a comprehensive PBMCs proteome characterisation as well as to create a SWATH library. It was also evaluated if by using the BD Vacutainer® CPT™ tubes for PBMCs isolation, it would be possible to identify a larger number of immunologically relevant proteins in comparison to plasma samples. The enrichment test assay revealed that it is possible to identify more immune-related proteins from isolated PBMCs than from plasma. Moreover, the majority of the quantified proteins with an “immune system” GO term assigned is present in higher amounts in PBMCs samples. 2D LC-MS/MS proved to be the best approach to use in qualitative analysis of PBMCs and in the construction of a SWATH library, since it resulted in an increase of both identified and quantified proteins (66.3% and 16.9%, respectively) in comparison to 1D LC-MS/MS. A total of 2071 proteins were identified and it was possible to quantify 922 different proteins among six distinct samples. From these proteins, 445 were commom between all individuals. In conclusion, this work provides a comprehensive PBMCs proteome dataset that will be useful in further studies that focus on the search for potential biological markers of various pathologies in these cells. Additionally, SWATH-MS proved to be a reproducible and effective acquisition method to quantify PBMCs proteins.

Multiple-Retrieval Case-Based Reasoning for Course Timetabling Problems

The structured representation of cases by attribute graphs in a Case-Based Reasoning (CBR) system for course timetabling has been the subject of previous research by the authors. In that system, the case base is organised as a decision tree and the retrieval process chooses those cases which are sub attribute graph isomorphic to the new case. The drawback of that approach is that it is not suitable for solving large problems. This paper presents a multiple-retrieval approach that partitions a large problem into small solvable sub-problems by recursively inputting the unsolved part of the graph into the decision tree for retrieval. The adaptation combines the retrieved partial solutions of all the partitioned sub-problems and employs a graph heuristic method to construct the whole solution for the new case. We present a methodology which is not dependant upon problem specific information and which, as such, represents an approach which underpins the goal of building more general timetabling systems. We also explore the question of whether this multiple-retrieval CBR could be an effective initialisation method for local search methods such as Hill Climbing, Tabu Search and Simulated Annealing. Significant results are obtained from a wide range of experiments. An evaluation of the CBR system is presented and the impact of the approach on timetabling research is discussed. We see that the approach does indeed represent an effective initialisation method for these approaches.

Multiple-retrieval case-based reasoning for course timetabling problems

The structured representation of cases by attribute graphs in a Case-Based Reasoning (CBR) system for course timetabling has been the subject of previous research by the authors. In that system, the case base is organised as a decision tree and the retrieval process chooses those cases which are sub attribute graph isomorphic to the new case. The drawback of that approach is that it is not suitable for solving large problems. This paper presents a multiple-retrieval approach that partitions a large problem into small solvable sub-problems by recursively inputting the unsolved part of the graph into the decision tree for retrieval. The adaptation combines the retrieved partial solutions of all the partitioned sub-problems and employs a graph heuristic method to construct the whole solution for the new case. We present a methodology which is not dependant upon problem specific information and which, as such, represents an approach which underpins the goal of building more general timetabling systems. We also explore the question of whether this multiple-retrieval CBR could be an effective initialisation method for local search methods such as Hill Climbing, Tabu Search and Simulated Annealing. Significant results are obtained from a wide range of experiments. An evaluation of the CBR system is presented and the impact of the approach on timetabling research is discussed. We see that the approach does indeed represent an effective initialisation method for these approaches.

Dynamic Coculture of a Prevascularized Engineered Bone Construct

The generation of functional, vascularized tissues is a key challenge for the field of tissue engineering. Before clinical implantations of tissue engineered bone constructs can succeed, in vitro fabrication needs to address limitations in large-scale tissue development, including controlled osteogenesis and an inadequate vasculature network to prevent necrosis of large constructs. The tubular perfusion system (TPS) bioreactor is an effective culturing method to augment osteogenic differentiation and maintain viability of human mesenchymal stem cell (hMSC)-seeded scaffolds while they are developed in vitro. To further enhance this process, we developed a novel osteogenic growth factors delivery system for dynamically cultured hMSCs using microparticles encapsulated in three-dimensional alginate scaffolds. In light of this increased differentiation, we characterized the endogenous cytokine distribution throughout the TPS bioreactor. An advantageous effect in the ‘outlet’ portion of the uniaxial growth chamber was discovered due to the system’s downstream circulation and the unique modular aspect of the scaffolds. This unique trait allowed us to carefully tune the differentiation behavior of specific cell populations. We applied the knowledge gained from the growth profile of the TPS bioreactor to culture a high-volume bone composite in a 3D-printed femur mold. This resulted in a tissue engineered bone construct with a volume of 200cm3, a 20-fold increase over previously reported sizes. We demonstrated high viability of the cultured cells throughout the culture period as well as early signs of osteogenic differentiation. Taking one step closer toward a viable implant and minimize tissue necrosis after implantation, we designed a composite construct by coculturing endothelial cells (ECs) and differentiating hMSCs, encouraging prevascularization and anastomosis of the graft with the host vasculature. We discovered the necessity of cell to cell proximity between the two cell types as well as preference for the natural cell binding capabilities of hydrogels like collagen. Notably, the results suggested increased osteogenic and angiogenic potential of the encapsulated cells when dynamically cultured in the TPS bioreactor, suggesting a synergistic effect between coculture and applied shear stress. This work highlights the feasibility of fabricating a high-volume, prevascularized tissue engineered bone construct for the regeneration of a critical size defect.

Flower abscission and fruit set on table grapes (Vitis vinifera L.): unraveling physiological and molecular mechanisms

Doutoramento em Engenharia Agronómica - Instituto Superior de Agronomia - UL