Projeto, construção e análise de desempenho de um forno solar alternativo tipo caixa a baixo custo

An alternative box-type solar oven constructed from the scrap iron of a gas conventional cook is presented, which functions principles are the effect greenhouse and the concentration. The oven of the conventional cook is the baking enclosure where the absorber (pot) of the solar oven is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven for the concentration of the radiation and a reflecting parabola was introduced in the baking enclosure for the exploitation of the incident reflected radiation in the interior of the oven. The oven is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove in study will be demonstrate The average internal temperature of the absorber was around 150°C and the internal temperature around 120°C. Will demonstrate that its low cost and good thermal performance represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

Construção e análise de desempenho de um forno/fogão solar tipo caixa construído a partir de uma sucata de pneu

An alternative box-type solar cooker built starting from the scrap of a tire and a scrap of old office chair is presented, which principles functions are the effect greenhouse and the concentration. The tire served as structure for making of is the baking enclosure where the absorber (roasting pan 20x30cm) of the solar is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven/cook for the concentration of the radiation and a reflecting parable was introduced in the baking enclosure for the exploitation of the incident reflected radiation inside of the oven/cook. The oven/cook is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove/cook in study will be demonstrate. The average internal temperature of the absorber was around 152,3°C and the internal temperature around 110°C. Will demonstrate that toits low cost and good thermal performance, represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

Análise de desempenho de um fogão solar com parabola fabricada em material compósito

It is presented a solar cooker made with a parabolic reflector composed by a composite material. For this purpose, it was utilized a cast concrete with a parabolic profile obtained by means of modeling. It will be demonstrated the manufacturing process and settings, as well as tests results, in order to determine the contact temperature and cooking time of some foods. This solar cooker presents the following main characteristics: the concentration method, low cost and easy manufacturing process. It was performed by employing recycled materials such as cement, plaster, crushed polystyrene and wheels. The captation area measures 1 square meter and its parabole was covered with a mirrors measuring 25 cm2. A temperature higher than 650°C was obtained. Furthermore, it has been demonstrated that the cooking viability for several type of foods such as beans, potatoes, rice, yams and pasta can be used in two meals for a family of four. In addition, the advantages of this cooker were analysed in comparison with others described in literature as well as those operating on gas. Especially in Northeast of Brazil, where there is a potential for solar energy, this prototype is an important tool, because it avoids not only desertification, but also pollutants from burning firewoods which cause ecological imbalance

Análise de desempenho de um fogão solar construído a partir de sucatas de antena de tv

Given the growing environmental crisis caused by degradation, mainly due to the use of polluting energy sources, increasing the growing use of renewable energies worldwide, with emphasis on solar energy, an abundant supply and available to everyone, which can be harnessed in several ways: electricity generation; dehydration of food; heating, disinfection and distillation and cooking. The latter has as its primary feature the viability of clean, renewable energy for society, combating ecological damage caused by large-scale use of firewood for cooking foods, use in tropical countries with high solar radiation, and has funding NGOs throughout the world with the goal of achieving low-income population. The proposed project consists of a solar cooker for concentration, working from the reflection of sunlight by a hub that they converge to a focal point at the bottom of the pot, getting lots of heat. The solar cooker under study consists of two elliptical reflecting parabolas made from the recycling of scrap TV antenna, having 0.29 m² of surface area for each antenna, which were covered by multiple mirrors of 2 mm thick and mounted on a metal structure, with correction for the mobility of the apparent movement of the sun. This structure was built with the recycling of scrap metal, possessing a relatively low cost compared with other solar cookers, around US$ 50.00. This cost becomes negligible, since that will involve a great benefit to not have fuel costs for each meal, unlike the use of gas or firewood for cooking food. The tests show that the cooker has reached the maximum temperature of 740 ° C, for boiling water in an average time of 28 minutes, cooking various types of foods such as potatoes, rice and pasta in an average time of 45 minutes and still going as a solar oven, making pizza baking and meat. These cooking times do not differ much from the cooking times on a gas stove, it becomes the solar cooker as a good consumer acceptance, and furthermore not to deliver the same gases that can poison the food as with the wood stove. Proves the viability of using the stove to cook or bake in two daily meals for a family, still presenting a position to improve his performance with the addition of new materials, equipment and techniques

Viabilidade térmica de um forno solar fabricado com sucatas de pneus

The proposed design provides a solar furnace alternative, box-like, low-cost operation to be used in cooking, comprising three scrap tires to make the recycling thereof. The tires were coupled to each other, forming an enclosure, which stood on its bottom covered by a parable multiple mirrors made from a urupema (sieve indigenous) and the inner sides of the oven aluminum sheet painted black, obtained from beer cans, thus being made to obtain the increase in the concentration of solar radiation incident on the inside of the prototype studied. Two tires were attached, leaving an air layer between them, with the function of thermal insulation. The third tire aimed to support the other two and thermally insulate the bottom of the oven. Externally was placed a metal frame with flat mirrors to reflect the incident rays into the oven, having a mobility to correct the apparent motion of the sun. Its primary feature is the viability of clean, renewable energy to society by tackling the ecological damage caused by the large-scale use of wood for cooking food. The tests show that the furnace reached the maximum temperature of 123.8 °C and baking various foods such as pizza, bun, and other lasagne in an average time 50 minutes. Proves the feasibility of using the oven. Presenting still able to improve their performance with the addition of new materials, equipment and techniques

Mariana , Pai contra mãe e O caso da vara : escravidão e chão histórico em Machado de Assis

Machado de Assis understood his time and brought his perception of Brazilian society in the 19th century, with its multiple aspects economy, politics, culture, amongst others - to the texts he wrote. Through the tensions lived in his novels and short stories, Machado displays Brazilian social reality and the changes it had been undergoing. Mariana and Pai contra mãe show the crisis of the slavery system, the relation of dependency, the treatment given to the captives and the lack of coherence of a country that intended to adopt Liberalism as an ideology, but which kept on living under the shadow of slavery and its consequences. A country where the priorities were given to the landlords, owners of slaves, in protection of their interests. O caso da vara tells about how the crias da casa little black girls who lived in the household and learned how to make spool embroidery were treated. What were the punishments for desobedience and how they were levelled out, how should be the behaviour of a child who lived as a social outcast. Thus, this paper aims at playing a game of mirrors between History and fiction. Not only to play it, but to analyze how Machado deals with the reflections of 19th century Brazil on his short stories

Abordando o ensino de óptica através da construção de telescópios

A proposta deste trabalho é a construção artesanal de um telescópio refletor do tipo Newtoniano relacionando conteúdos abordados na disciplina de óptica, como a formação de imagens em lentes e espelhos, aberrações esféricas e cromáticas, interferência e difração, com cada fase do processo de construção. Com o aparelho construído é possível abordar a fotografia lunar e planetária com alta resolução e sua utilização por alunos do curso de Licenciatura em Física já demonstra ser um grande incentivo à contemplação do céu e à compreensão de muitos fenômenos físicos, com ocorrências de eclipses, formação das marés, estações do ano, etc, que geralmente são pouco abordados nas escolas de Ensino Fundamental e Médio. de acordo com diagnóstico realizado pelos alunos de graduação em algumas escolas do município de Bauru, verificou-se que a única abordagem de astronomia é apenas em relação ao sistema solar, especificamente órbitas planetárias, nas disciplinas de Física ou Geografia. Além do telescópio, a utilização de animações produzidas por alunos de graduação também pode ser considerada como uma ferramenta eficiente no ensino de astronomia, principalmente para alunos de Ensino Fundamental.

Structural variations among monocot emergent and amphibious species from lakes of the semi-arid region of Bahia, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Toxicidade aguda e risco ecotoxicológico do fipronil para o guarú (Poecilia reticulata) e dissipação no ambiente aquático

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Interferometria óptica aplicada à medição de amplitudes de vibração nanométricas em piezoatuadores flextensionais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Um estudo de fractais geométricos através de caleidoscópios e softwares de geometria dinâmica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A Identidade de meninas negras: o mundo do faz de contas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A cristandade e o reino francês: duas facetas do poder Régio (1372-1404)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O léxico da Belle Époque na obra de João do Rio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Economia solidária na 10ª Região Administrativa do estado de São Paulo: possibilidades, limitações e contradições

Pós-graduação em Geografia - FCT