Aluminum induced crystallization of strongly (111) oriented polycrystalline silicon thin film and nucleation analysis

A polycrystalline silicon thin film was fabricated on glass substrate by means of aluminum induced crystallization (AIC). Al and alpha-Si layers were deposited by magnetron sputtering respectively and annealed at 480A degrees C for 1 h to realize layer exchange. The polycrystalline silicon thin film was continuous and strongly (111) oriented. By analyzing the structure variation of the oxidation membrane and lattice mismatch between gamma-Al2O3 and Si, it was concluded that aluminum promoted the formation of (111) oriented silicon nucleus by controlling the orientation of gamma-Al2O3, which was formed at the early stage of annealing.

Optymalizacja metod analizy Főrsterowskiego rezonansowego przeniesienia energii (FRET) pojedynczych cząsteczek

Wydział Chemii: Zakład Chemii Fizycznej

BAYESIAN MODEL SEARCH AND MULTILEVEL INFERENCE FOR SNP ASSOCIATION STUDIES.

Technological advances in genotyping have given rise to hypothesis-based association studies of increasing scope. As a result, the scientific hypotheses addressed by these studies have become more complex and more difficult to address using existing analytic methodologies. Obstacles to analysis include inference in the face of multiple comparisons, complications arising from correlations among the SNPs (single nucleotide polymorphisms), choice of their genetic parametrization and missing data. In this paper we present an efficient Bayesian model search strategy that searches over the space of genetic markers and their genetic parametrization. The resulting method for Multilevel Inference of SNP Associations, MISA, allows computation of multilevel posterior probabilities and Bayes factors at the global, gene and SNP level, with the prior distribution on SNP inclusion in the model providing an intrinsic multiplicity correction. We use simulated data sets to characterize MISA's statistical power, and show that MISA has higher power to detect association than standard procedures. Using data from the North Carolina Ovarian Cancer Study (NCOCS), MISA identifies variants that were not identified by standard methods and have been externally "validated" in independent studies. We examine sensitivity of the NCOCS results to prior choice and method for imputing missing data. MISA is available in an R package on CRAN.

Los contratistas de cosecha de plantaciones forestales : análisis de las funciones de producción y de la influencia de la innovación tecnológica como factor en las mismas

La cosecha de plantaciones forestales ha crecido sostenidamente en Sudamérica en los últimos años. Esta se desarrolla mayoritariamente con empresas contratistas, que abastecen plantas industriales. Esta Tesis tiene por objetivos analizar por medio de funciones de producción y de la innovación, las empresas contratistas de cosecha en Misiones y Corrientes (Argentina), Paraná, Santa Catarina y Rio Grande do Sul (Brasil), y Uruguay. Los datos fueron obtenidos por encuestas personalizadas: 22 en Argentina, 35 en Brasil, y 10 en Uruguay, entre 2008 y 2012. Se evaluaron modelos de costos y producción. El crecimiento de las empresas fue analizado con modelos lineales mixtos. La producción relevada fue de 17,7 millones de metros cúbicos, (58,3 por ciento del total regional). Los modelos de producción del tipo Cobb-Douglas, mostraron muy alta necesidad de capital al inicio, con un cambio a partir de las 50.000 t/mes, y fueron asintóticos desde las 100.000 t/mes. Los contratistas en Argentina produjeron en promedio 13.636 t/mes, con 30,7 empleados por empresa. En Brasil, produjeron 25.649t/mes, con 65,12 empleados. Los modelos de costo por tonelada resultaron en 5,82 US$/t para 18.000 t/mes para Argentina. En Brasil el costo mínimo fue de 11,23 US$/t para 25.000 t/mes. En Uruguay fue de 18,43 US$/t para 15.000 t/mes. En los tres países existió preponderancia de contratos con celulósicas. No se encontró ninguna contratista que desarrolle los indicadores de producción o de costo por tonelada que obtuvieron estas empresas mutualistas. En los análisis de producción de los últimos 10 años, fueron significativos el número de empleados, y la mecanización. Cuando se consideraron la capacidad de hacer negocios y la innovación, fue solo significativa esta última. La inclusión de las variables aleatorias, país y edad de la empresa, produjo mejores AIC (Akaike Information Criterion). En el análisis del crecimiento de las empresas en los últimos 10 años, resultaron significativos el capital y el número de empleados. En los últimos 5 años, ocurrió lo contrario, fueron significativas la innovación y la capacidad de hacer negocios. Se puede concluir que el capital es el principal factor para predecir la capacidad productiva de una contratista. Existen diferencias de escala entre las empresas de los tres países, así como en los sectores de cada país. A los largo de los últimos 10 años, las empresas han ido creciendo basándose en diferentes estrategias, al principio en capital y empleados, y últimamente en la capacidad de hacer negocios y en la innovación. Sudamérica, Cosecha forestal.

Bivariate distribution modeling with tree diameter and height data

The Logit-Logistic (LL), Johnson's SB, and the Beta (GBD) are flexible four-parameter probability distribution models in terms of the (skewness-kurtosis) region covered, and each has been used for modeling tree diameter distributions in forest stands. This article compares bivariate forms of these models in terms of their adequacy in representing empirical diameter-height distributions from 102 sample plots. Four bivariate models are compared: SBB, the natural, well-known, and much-used bivariate generalization of SB; the bivariate distributions with LL, SB, and Beta as marginals, constructed using Plackett's method (LL-2P, etc.). All models are fitted using maximum likelihood, and their goodness-of-fits are compared using minus log-likelihood (equivalent to Akaike's Information Criterion, the AIC). The performance ranking in this case study was SBB, LL-2P, GBD-2P, and SB-2P

Channel characterization for single- and multiple-antenna wearable systems used for indoor body-to-body communications

In this paper, an analysis of radio channel characteristics for single- and multiple-antenna bodyworn systems for use in body-to-body communications is presented. The work was based on an extensive measurement campaign conducted at 2.45 GHz representative of an indoor sweep and search scenario for fire and rescue personnel. Using maximum-likelihood estimation in conjunction with the Akaike information criterion (AIC), five candidate probability distributions were investigated and from these the kappa - mu distribution was found to best describe small-scale fading observed in the body-to-body channels. Additional channel parameters such as autocorrelation and the cross-correlation coefficient between fading signal envelopes were also analyzed. Low cross correlation and small differences in mean signal levels between potential dual-branch diversity receivers suggested that the prospect of successfully implementing diversity in this type application is extremely good. Moreover, using selection combination, maximal ratio, and equal gain combining, up to 8.69-dB diversity gain can be made available when four spatially separated antennas are used at the receiver. Additional improvements in the combined envelopes through lower level crossing rates and fade durations at low signal levels were also observed.

Experimenting with the Coxian Phase-Type Distribution to Uncover Suitable Fits

In the past few decades, Coxian phase-type distributions have become increasingly more popular as a means of representing survival times. In healthcare, they are considered suitable for modelling the length of stay of patients in hospital and more recently for modelling the patient waiting times in Accident and Emergency Departments. The Coxian phase-type distribution has not only been shown to provide a good representation of real survival data, but its interpretation seems reasonably initiative to the medical experts. The drawback, however, is fitting the distribution to the data. There have been many attempts at accurately estimating the Coxian phase-type parameters. This paper wishes to examine the most promising of the approaches reported in the literature to determine the most accurate. Three performance measures are introduced to assess the fitting process of the algorithms along with the likelihood values and AIC to examine the goodness of fit and complexity of the model. Previous research suggests that the fitting process is strongly influenced by the initial parameter estimates and the data itself being quite variable. To overcome this, one experiment in this research paper will use the same initial parameter values for each estimation and perform the fits on the data simulated from a Coxian phase-type distribution with known parameters.

Statistical-based monitoring of multivariate non-Gaussian systems

The monitoring of multivariate systems that exhibit non-Gaussian behavior is addressed. Existing work advocates the use of independent component analysis (ICA) to extract the underlying non-Gaussian data structure. Since some of the source signals may be Gaussian, the use of principal component analysis (PCA) is proposed to capture the Gaussian and non-Gaussian source signals. A subsequent application of ICA then allows the extraction of non-Gaussian components from the retained principal components (PCs). A further contribution is the utilization of a support vector data description to determine a confidence limit for the non-Gaussian components. Finally, a statistical test is developed for determining how many non-Gaussian components are encapsulated within the retained PCs, and associated monitoring statistics are defined. The utility of the proposed scheme is demonstrated by a simulation example, and the analysis of recorded data from an industrial melter.

Header design for flow equalization in microstructured reactors

To enhance the uniformity of fluid flow distribution in microreactors, a header configuration consisting of a cone diffuser connected to a thick-walled screen has been proposed. The thick-walled screen consists of two sections: the upstream section constitutes a set of elongated parallel upstream channels and the downstream section constitutes a set of elongated parallel downstream channels positioned at an angle of 90 with respect to the upstream channels. In this approach the problem of flow, equalization reduces to that of flow equalization in the first and second downstream channels of the thick-walled screen. In turn, this requires flow equalization in the corresponding cross sections of the upstream channels. The computational fluid dynamics analysis of the fluid flow maldistribution shows that eight parallel upstream channels with a width of 300-600 pm are required per 1 cm of length for flow equalization. The length to width ratio of these channels has to be > 15. The numerical results suggest that the proposed header-configuration can effectively improve the performance of the downstream microstructured devices, decreasing the ratio of the maximum flow velocity to the mean flow velocity from 2 to 1.005 for a wide range of Reynolds numbers (0.5-10). 2006 American Institute of Chemical Engineers AlChE J, 53: 28-38, 2007.

How many dimensions of biodiversity do we need?

Biodiversity is not a commodity, nor a service (ecosystem or otherwise), it is a scientific measure of the complexity of a biological system. Rather than directly valuing biodiversity, economists have tended to value its services, more often the services of 'key' species. This is understandable given the confusion of definitions and measures of biodiversity, but weakly justified if biodiversity is not substitutable. We provide a quantitative and comprehensive definition of biodiversity and propose a framework for examining its substitutability as the first step towards valuation. We define biodiversity as a measure of semiotic information. It is equated with biocomplexity and measured by Algorithmic Information Content (AIC). We argue that the potentially valuable component of this is functional information content (FIC) which determines biological fitness and supports ecosystem services. Inspired by recent extensions to the Noah's Ark problem, we show how FIC/AIC can be calculated to measure the degree of substitutability within an ecological community. From this, we derive a way to rank whole communities by Indirect Use Value, through quantifying the relation between system complexity and production rate of ecosystem services. Understanding biodiversity as information evidently serves as a practical interface between economics and ecological science.

Functional Complexity: The source of value in biodiversity.

Biodiversity may be seen as a scientific measure of the complexity of a biological system, implying an information basis. Complexity cannot be directly valued, so economists have tried to define the services it provides, though often just valuing the services of 'key' species. Here we provide a new definition of biodiversity as a measure of functional information, arguing that complexity embodies meaningful information as Gregory Bateson defined it. We argue that functional information content (FIC) is the potentially valuable component of total (algorithmic) information content (AIC), as it alone determines biological fitness and supports ecosystem services. Inspired by recent extensions to the Noah's Ark problem, we show how FIC/AIC can be calculated to measure the degree of substitutability within an ecological community. Establishing substitutability is an essential foundation for valuation. From it, we derive a way to rank whole communities by Indirect Use Value, through quantifying the relation between system complexity and the production rate of ecosystem services. Understanding biodiversity as information evidently serves as a practical interface between economics and ecological science. © 2012 Elsevier B.V.

Role of Predalors, Habitat Attributes, and Spatial Autocorrelation on the Distribution of Eggs in the Northern Spectacled Salamander (Salamandrina perspicillata)

We predicted that the probability of egg occurrence of salamander Salamandrina perspicillata depended on stream features and predation by native crayfish Austropotamobius fulcisianus and the introduced trout Salmo trutta. We assessed the presence of S. perspicillata at 54 sites within a natural reserve of southern Tuscany, Italy. Generalized linear models with binomial errors were constructed using egg presence/absence and altitude, stream mean size and slope, electrical conductivity, water pH and temperature, and a predation factor, defined according to the presence/absence of crayfish and trout. Some competing models also included an autocovariate term, which estimated how much the response variable at any one sampling point reflected response values at surrounding points. The resulting models were compared using Akaike's information criterion. Model selection led to a subset of 14 models with Delta AIC(c) <7 (i.e., models ranging from substantial support to considerably less support), and all but one of these included an effect of predation. Models with the autocovariate term had considerably more support than those without the term. According to multimodel inference, the presence of trout and crayfish reduced the probability of egg occurrence from a mean level of 0.90 (SE limits: 0.98-0.55) to 0.12 (SE limits: 0.34-0.04). The presence of crayfish alone had no detectable effects (SE limits: 0.86-0.39). The results suggest that introduced trout have a detrimental effect on the reproductive output of S. perspicillata and confirm the fundamental importance of distinguishing the roles of endogenous and exogenous forces that act on population distribution.

Application of DPSIR framework integrated with multiple regression model to simulate Guadiana catchment - estuary continuum, south eastern Iberia

Dissertação de Mestrado, Gestão da Água e da Costa, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2010

Forest resources in Graciosa Island (Azores) : biomass availability for sustainable energetic use

Dissertação de Mestrado em Ambiente, Saúde e Segurança.