Modeling, stability analysis and control of microgrid

With the increase in the level of global warming, renewable energy based distributed generators (DGs) will increasingly play a dominant role in electricity production. Distributed generation based on solar energy (photovoltaic and solar thermal), wind, biomass, mini-hydro along with use of fuel cells and micro turbines will gain considerable momentum in the near future. A microgrid consists of clusters of load and distributed generators that operate as a single controllable system. The interconnection of the DG to the utility/grid through power electronic converters has raised concern about safe operation and protection of the equipments. Many innovative control techniques have been used for enhancing the stability of microgrid as for proper load sharing. The most common method is the use of droop characteristics for decentralized load sharing. Parallel converters have been controlled to deliver desired real power (and reactive power) to the system. Local signals are used as feedback to control converters, since in a real system, the distance between the converters may make the inter-communication impractical. The real and reactive power sharing can be achieved by controlling two independent quantities, frequency and fundamental voltage magnitude. In this thesis, an angle droop controller is proposed to share power amongst converter interfaced DGs in a microgrid. As the angle of the output voltage can be changed instantaneously in a voltage source converter (VSC), controlling the angle to control the real power is always beneficial for quick attainment of steady state. Thus in converter based DGs, load sharing can be performed by drooping the converter output voltage magnitude and its angle instead of frequency. The angle control results in much lesser frequency variation compared to that with frequency droop. An enhanced frequency droop controller is proposed for better dynamic response and smooth transition between grid connected and islanded modes of operation. A modular controller structure with modified control loop is proposed for better load sharing between the parallel connected converters in a distributed generation system. Moreover, a method for smooth transition between grid connected and islanded modes is proposed. Power quality enhanced operation of a microgrid in presence of unbalanced and non-linear loads is also addressed in which the DGs act as compensators. The compensator can perform load balancing, harmonic compensation and reactive power control while supplying real power to the grid A frequency and voltage isolation technique between microgrid and utility is proposed by using a back-to-back converter. As utility and microgrid are totally isolated, the voltage or frequency fluctuations in the utility side do not affect the microgrid loads and vice versa. Another advantage of this scheme is that a bidirectional regulated power flow can be achieved by the back-to-back converter structure. For accurate load sharing, the droop gains have to be high, which has the potential of making the system unstable. Therefore the choice of droop gains is often a tradeoff between power sharing and stability. To improve this situation, a supplementary droop controller is proposed. A small signal model of the system is developed, based on which the parameters of the supplementary controller are designed. Two methods are proposed for load sharing in an autonomous microgrid in rural network with high R/X ratio lines. The first method proposes power sharing without any communication between the DGs. The feedback quantities and the gain matrixes are transformed with a transformation matrix based on the line R/X ratio. The second method involves minimal communication among the DGs. The converter output voltage angle reference is modified based on the active and reactive power flow in the line connected at point of common coupling (PCC). It is shown that a more economical and proper power sharing solution is possible with the web based communication of the power flow quantities. All the proposed methods are verified through PSCAD simulations. The converters are modeled with IGBT switches and anti parallel diodes with associated snubber circuits. All the rotating machines are modeled in detail including their dynamics.

Wavelet based approaches and high resolution methods for complex process models

Many industrial processes and systems can be modelled mathematically by a set of Partial Differential Equations (PDEs). Finding a solution to such a PDF model is essential for system design, simulation, and process control purpose. However, major difficulties appear when solving PDEs with singularity. Traditional numerical methods, such as finite difference, finite element, and polynomial based orthogonal collocation, not only have limitations to fully capture the process dynamics but also demand enormous computation power due to the large number of elements or mesh points for accommodation of sharp variations. To tackle this challenging problem, wavelet based approaches and high resolution methods have been recently developed with successful applications to a fixedbed adsorption column model. Our investigation has shown that recent advances in wavelet based approaches and high resolution methods have the potential to be adopted for solving more complicated dynamic system models. This chapter will highlight the successful applications of these new methods in solving complex models of simulated-moving-bed (SMB) chromatographic processes. A SMB process is a distributed parameter system and can be mathematically described by a set of partial/ordinary differential equations and algebraic equations. These equations are highly coupled; experience wave propagations with steep front, and require significant numerical effort to solve. To demonstrate the numerical computing power of the wavelet based approaches and high resolution methods, a single column chromatographic process modelled by a Transport-Dispersive-Equilibrium linear model is investigated first. Numerical solutions from the upwind-1 finite difference, wavelet-collocation, and high resolution methods are evaluated by quantitative comparisons with the analytical solution for a range of Peclet numbers. After that, the advantages of the wavelet based approaches and high resolution methods are further demonstrated through applications to a dynamic SMB model for an enantiomers separation process. This research has revealed that for a PDE system with a low Peclet number, all existing numerical methods work well, but the upwind finite difference method consumes the most time for the same degree of accuracy of the numerical solution. The high resolution method provides an accurate numerical solution for a PDE system with a medium Peclet number. The wavelet collocation method is capable of catching up steep changes in the solution, and thus can be used for solving PDE models with high singularity. For the complex SMB system models under consideration, both the wavelet based approaches and high resolution methods are good candidates in terms of computation demand and prediction accuracy on the steep front. The high resolution methods have shown better stability in achieving steady state in the specific case studied in this Chapter.

User facilitated congestion and attack mitigation

The IEEE Wireless LAN standard has been a true success story by enabling convenient, efficient and low-cost access to broadband networks for both private and professional use. However, the increasing density and uncoordinated operation of wireless access points, combined with constantly growing traffic demands have started hurting the users' quality of experience. On the other hand, the emerging ubiquity of wireless access has placed it at the center of attention for network attacks, which not only raises users' concerns on security but also indirectly affects connection quality due to proactive measures against security attacks. In this work, we introduce an integrated solution to congestion avoidance and attack mitigation problems through cooperation among wireless access points. The proposed solution implements a Partially Observable Markov Decision Process (POMDP) as an intelligent distributed control system. By successfully differentiating resource hampering attacks from overload cases, the control system takes an appropriate action in each detected anomaly case without disturbing the quality of service for end users. The proposed solution is fully implemented on a small-scale testbed, on which we present our observations and demonstrate the effectiveness of the system to detect and alleviate both attack and congestion situations.

Molecular mechanisms of bacteriophage phi6 RNA-dependent RNA polymerase and its utilization in biotechnology

Double-stranded RNA (dsRNA) viruses encode only a single protein species that contains RNA-dependent RNA polymerase (RdRP) motifs. This protein is a central component in the life cycle of a dsRNA virus, carrying out both RNA transcription and replication. The architecture of viral RdRPs resembles that of a 'cupped right hand' with fingers, palm and thumb domains. Those applying de novo initiation have additional structural features, including a flexible C-terminal domain that constitutes the priming platform. Moreover, viral RdRPs must be able to interact with the incoming 3'-terminus of the template and position it so that a productive binary complex is formed. Bacteriophage phi6 of the Cystoviridae family is to date one of the best studied dsRNA viruses. The purified recombinant phi6 RdRP is highly active in vitro and possesses both RNA replication and transcription activities. The extensive biochemical observations and the atomic level crystal structure of the phi6 RdRP provides an excellent platform for in-depth studies of RNA replication in vitro. In this thesis, targeted structure-based mutagenesis, enzymatic assays and molecular mapping of phi6 RdRP and its RNA were used to elucidate the formation of productive RNA-polymerase binary complexes. The positively charged rim of the template tunnel was shown to have a significant role in the engagement of highly structured ssRNA molecules, whereas specific interactions further down in the template tunnel promote ssRNA entry to the catalytic site. This work demonstrated that by aiding the formation of a stable binary complex with optimized RNA templates, the overall polymerization activity of the phi6 RdRP can be greatly enhanced. Furthermore, proteolyzed phi6 RdRPs that possess a nick in the polypeptide chain at the hinge region, which is part of the extended loop, were better suited for catalysis at higher temperatures whilst favouring back-primed initiation. The clipped C-terminus remains associated with the main body of the polymerase and the hinge region, although structurally disordered, is involved in the control of C-terminal domain displacement. The accumulated knowhow on bacteriophage phi6 was utilized in the development of two technologies for the production of dsRNA: (i) an in vitro system that combines the T7 RNA polymerase and the phi6 RdRP to generate dsRNA molecules of practically unlimited length, and (ii) an in vivo RNA replication system based on restricted infection with phi6 polymerase complexes in bacterial cells to produce virtually unlimited amounts of dsRNA. The pools of small interfering RNAs derived from dsRNA produced by these systems were validated and shown to efficiently decrease the expression of both exogenous and endogenous targets.

Mixed Wireless Communications and RFID Sensor Networks over Fibre

A second harmonic suppression scheme allowing RoF links to support communications and passive UHF RFID is reviewed. Using RoF distributed antenna system techniques, the coverage and location accuracy of passive UHF RFID are significantly improved.

基于消息中间件的分布式查询系统

在三层结构中,中间层的实现是整个系统的核心.提出了一个基于消息中间件实现中间层的结构框架,能够以较少的花费实现一个分布式查询系统.中间层各个业务组件利用消息中间件通信,屏蔽了网络复杂性,实现异构平台的互操作,利用持久队列可以确保通信的可靠性,减轻了系统的开发工作和复杂度.

一种分布式转发基站测控系统的研究与实现

布式监测系统(DCS)在许多领域具有重要的应用价值.针对目前分布式监测系统造价高、运行不稳定等问题,该文提出了一种解决方案--基于多种通讯链路的分布式转发基站监测系统.该文详细介绍了阐述了该监测控制系统的工作原理,并对监测控制系统的结构(包括软件的结构和硬件系统的结构)进行了具体地说明,然后详细描述了监控系统软件、硬件以及通讯协议的设计与实现;文章最后,对基于该系统的一个成功应用--无线寻呼基站无人测控系统的实现作了介绍.无线寻呼基站运行实践中所表现出的低成本、高性能的特点进一步验证了该方案的可实施性.

一种新的分布式控制系统容错调度算法

目前多数容错调度算法在调度非周期任务时采用预留时间的方法,非周期任务无法得到充分响应.针对该问题,提出一种新的分布式控制系统容错调度算法,采用任务集划分的方法在不同处理机上运行不同的周期任务子集,使每个处理机具有不同的非周期任务预留时间,当非周期任务发生时,即可得到有效响应.结果表明,该方法能提高容错调度的效率.

基于分布式内存数据库的HIRFL-CSR真空监控系统

This paper introduced a real-time vacuum monitor system based on multilayer Web architecture for HIRFL-CSR(Heavy Ion Research Facility of Lanzhou & Cooler Storage Ring) project in Lanzhou.It combined with COM/DCOM to develop the application layer,and developed the web layer with ActiveX and Ajax technology.It provided a facility and efficiency method for real-time control.The application shows that this system runs stably and accurately.中文文摘：简要介绍了国家"九五"重大科学工程——兰州重离子加速器冷却储存环(HIRFL-CSR)真空监控系统的总体结构,分析了在Web构架下,基于分布式内存数据库的多层真空监控系统的实现方法。采用分布式内存数据库,解决了基于Web构架的分布式实时应用环境下对系统和网络资源的消耗问题。在软件控制方面采用了统一调度,既简化了软件实现过程,又提高了系统的安全性、高效性和易维护性。该系统已成功运行。

基于ARM的研磨抛光机器人运动控制器的设计

本文设计了研磨抛光机器人分布式控制系统中的一种运动控制器,并对运动控制器基于AT91M40800微控制器的硬件结构、基于μC/OS-Ⅱ实时操作系统的软件模块和采用的参数模糊自整定PID机器人关节位置控制策略进行了详细介绍。实验表明该控制器可以大大降低研磨抛光机器人的位置跟踪误差。提高了关节控制的计算及处理能力,易于扩展和维护。

机器人化月表采样器控制系统研究

在未来的深空探测任务中迫切需要采样任务的机器人化。为突破这一关键的技术,我们研制了一台六自由度的机器人化月表采样器原理样机,为其选择合理的控制方式并搭建了一套基于CAN总线的分布式控制系统。本文将详细介绍该机器人化月表采样器的工作原理及其控制系统的基本结构,并将阐述在操作采样器执行采样任务时采用的控制方式。最后搭建试验平台进行采样试验,验证采样器和控制系统的基本功能及其有效性。

仿人机器人控制系统的研究与实现

根据仿人机器人控制性能的要求,设计开发了关节控制器,并通过CAN总线把各个关节控制器、力传感器及上位机连接在一起,构成了分布式控制系统.利用无线局域网技术,实现了语音、视频等多媒体信息的传输,把监控台、头部、上身和移动平台连接在一起,构成了仿人机器人完整的控制系统.最后提出了一些设想以提高系统的性能.

仿人机器人系统的研究与实现

针对仿人机器人的结构和控制性能的要求,设计开发了机器人的关节控制器,并利用CAN总线把各个关节和力传感器及上位机连接在一起,构成了有效可靠的分布式控制系统;利用无线局域网技术,实现了语音、视频等多媒体信息的传输,构成了仿人机器人完整的控制系统。最后提出了一些设想以提高系统的性能。

基于分布式专家系统的超高压输电线路巡检机器人控制系统的研究

探讨了基于分布式专家系统的超高压输电线路巡检机器人控制系统，给出了一种利用CUPS和C、VC++混合编程构成分布式专家系统作为机器人控制器的方法，并且提出了一种基于规则和证据的可信度(CF)的分布式专家系统的协调算法．经过试验论证，该控制方法能很好地实现超高压输电线路巡检机器人的作业功能。