A disaggregate discrete choice model of transportation demand by elderly and disabled people in rural Virginia

This paper uses a correlated multinomial logit model and a Poisson regression model to measure the factors affecting demand for different types of transportation by elderly and disabled people in rural Virginia. The major results are: (a) A paratransit system providing door-to-door service is highly valued by transportation-handicapped people; (b) Taxis are probably a potential but inferior alternative even when subsidized; (c) Buses are a poor alternative, especially in rural areas where distances to bus stops may be long; (d) Making buses handicap-accessible would have a statistically significant but small effect on mode choice; (e) Demand is price inelastic; and (f) The total number of trips taken is insensitive to mode availability and characteristics. These results suggest that transportation-handicapped people take a limited number of trips. Those they do take are in some sense necessary (given the low elasticity with respect to mode price or availability). People will substitute away from relying upon others when appropriate transportation is available, at least to some degree. But such transportation needs to be flexible enough to meet the needs of the people involved.

Two dynamic discrete choice estimation problems and simulation method solutions

This paper considers two problems that frequently arise in dynamic discrete choice problems but have not received much attention with regard to simulation methods. The first problem is how to simulate unbiased simulators of probabilities conditional on past history. The second is simulating a discrete transition probability model when the underlying dependent variable is really continuous. Both methods work well relative to reasonable alternatives in the application discussed. However, in both cases, for this application, simpler methods also provide reasonably good results.

Discrete phase-locked loop systems and spreadsheets

This paper demonstrates the use of a spreadsheet in exploring non-linear difference equations that describe digital control systems used in radio engineering, communication and computer architecture. These systems, being the focus of intensive studies of mathematicians and engineers over the last 40 years, may exhibit extremely complicated behaviour interpreted in contemporary terms as transition from global asymptotic stability to chaos through period-doubling bifurcations. The authors argue that embedding advanced mathematical ideas in the technological tool enables one to introduce fundamentals of discrete control systems in tertiary curricula without learners having to deal with complex machinery that rigorous mathematical methods of investigation require. In particular, in the appropriately designed spreadsheet environment, one can effectively visualize a qualitative difference in the behviour of systems with different types of non-linear characteristic.

Refining a teaching pattern: Reflection around artefacts

This book is about understanding the nature and application of reflection in higher education. It provides a theoretical model to guide the implementation of reflective learning and reflective practice across multiple disciplines and international contexts in higher education. The book presents research into the ways in which reflection is both considered and implemented in different ways across different professional disciplines, while maintaining a common purpose to transform and improve learning and/or practice. Chapter 13 'Refining a Teaching Pattern: Reflection Around Artefacts' explores reflective practices of an artefact, in this case fashion design garment samples.

Decision support system for age-related macular degeneration using discrete wavelet transform

Age-related macular degeneration (AMD) affects the central vision and subsequently may lead to visual loss in people over 60 years of age. There is no permanent cure for AMD, but early detection and successive treatment may improve the visual acuity. AMD is mainly classified into dry and wet type; however, dry AMD is more common in aging population. AMD is characterized by drusen, yellow pigmentation, and neovascularization. These lesions are examined through visual inspection of retinal fundus images by ophthalmologists. It is laborious, time-consuming, and resource-intensive. Hence, in this study, we have proposed an automated AMD detection system using discrete wavelet transform (DWT) and feature ranking strategies. The first four-order statistical moments (mean, variance, skewness, and kurtosis), energy, entropy, and Gini index-based features are extracted from DWT coefficients. We have used five (t test, Kullback–Lieber Divergence (KLD), Chernoff Bound and Bhattacharyya Distance, receiver operating characteristics curve-based, and Wilcoxon) feature ranking strategies to identify optimal feature set. A set of supervised classifiers namely support vector machine (SVM), decision tree, k -nearest neighbor ( k -NN), Naive Bayes, and probabilistic neural network were used to evaluate the highest performance measure using minimum number of features in classifying normal and dry AMD classes. The proposed framework obtained an average accuracy of 93.70 %, sensitivity of 91.11 %, and specificity of 96.30 % using KLD ranking and SVM classifier. We have also formulated an AMD Risk Index using selected features to classify the normal and dry AMD classes using one number. The proposed system can be used to assist the clinicians and also for mass AMD screening programs.

Real-time decision making by driverless city vehicles : a discrete event driven approach

This thesis addresses the topic of real-time decision making by driverless (autonomous) city vehicles, i.e. their ability to make appropriate driving decisions in non-simplified urban traffic conditions. After addressing the state of research, and explaining the research question, the thesis presents solutions for the subcomponents which are relevant for decision making with respect to information input (World Model), information output (Driving Maneuvers), and the real-time decision making process. TheWorld Model is a software component developed to fulfill the purpose of collecting information from perception and communication subsystems, maintaining an up-to-date view of the vehicle’s environment, and providing the required input information to the Real-Time Decision Making subsystem in a well-defined, and structured way. The real-time decision making process consists of two consecutive stages. While the first decision making stage uses a Petri net to model the safetycritical selection of feasible driving maneuvers, the second stage uses Multiple Criteria Decision Making (MCDM) methods to select the most appropriate driving maneuver, focusing on fulfilling objectives related to efficiency and comfort. The complex task of autonomous driving is subdivided into subtasks, called driving maneuvers, which represent the output (i.e. decision alternatives) of the real-time decision making process. Driving maneuvers are considered as implementations of closed-loop control algorithms, each capable of maneuvering the autonomous vehicle in a specific traffic situation. Experimental tests in both a 3D simulation and real-world experiments attest that the developed approach is suitable to deal with the complexity of real-world urban traffic situations.

Self-reflection as an intervention to influence achievement goal orientations and intrinsic motivation

In the context of physical activity, intrinsic motivation refers to the inherent satisfaction associated with participation in the activity. Interest-enjoyment, perceived competence, and effort have been identified as three underlying components of intrinsic motivation. Achievement goal theory stipulates that achievement goals guide our beliefs and behavior. The two main achievement goal orientations identified in the sport and physical activity literature are task and ego orientations. A person with a strong task orientation defines success in self-referenced terms, as improving one’s own performance or mastering new skills. Someone with a strong ego orientation defines success normatively, as being better than others. The majority of research suggests that having a strong task orientation is a good thing, whether with regard to motivationally adaptive responses, sources of sport confidence, students’ satisfaction with learning, or the use of cognitive and self-regulatory strategies. Although the literature supporting the potential benefits of having a strong task orientation is vast, considerably less research has tested interventions designed to strengthen task orientations and intrinsic motivation. A climate that emphasises individual mastery has resulted in increased interest-enjoyment and perceived competence, whereas an emphasis on competition and comparison with others has resulted in a decrease in interest-enjoyment and an increase in tension-pressure. One possible intervention is the use of structured self-reflection. Using self-reflection sheets that cause respondents to focus on specific elements of technique or skills, and rate one’s own performance, should theoretically promote a task focus. Hanrahan suggested that engaging in self-reflection may enhance intrinsic motivation. Perceived competence could be positively affected, as self-analysis and self-monitoring have been found to positively influence the acquisition of physical skills. The purpose of this study was to determine if the use of structured self-reflection in community dance classes would influence achievement goal orientations or levels of intrinsic motivation.

Critical reflection

Critical reflection is a necessary component of professionalism in early childhood education. Evidence of critical reflection within a service draws attention to the intellectual work of early childhood educators and highlights professional capacities beyond the care of young children.

Barbara's story : a thematic analysis of a relative's reflection of being in the intensive care unit

Aim The aim of this reflective account is to provide a view of the intensive care unit (ICU) relative’s experiences of supporting and being supported in the ICU. Background Understanding the relatives’ experiences of ICU is important especially because a recent work has identified the potential for this group to develop post-traumatic stress disorder, a condition that is normally equated with the ICU survivor. Design A thematic analysis was used in identifying emerging themes that would be significant in an ICU nursing context. Setting The incident took place in two 8-bedded ICUs (Private and National Health Service) in October. Results Two emergent themes were identified from the reflective story – fear of the technological environment and feeling hopeless and helpless. Conclusion The use of relative stories as an insight into the live experiences of ICU relatives may give a deeper understanding of their life-world. The loneliness, anguish and pain of the ICU relative extends beyond the walls of the ICU, and this is often negated as the focus of the ICU team is the patient. Relevance to clinical practice: Developing strategies to support relatives might include the use of relative diaries used concurrently with patient diaries to support this groups recovery or at the very least a gaining a sense of understanding for their ICU experience. Relative follow-up clinics designed specifically to meet their needs where support and advice can be given by the ICU team, in addition to making timely and appropriate referrals to counselling services and perhaps involving spiritual leaders where appropriate.

Using upper bounds on attainable discrimination to select discrete valued features

Selection of features that will permit accurate pattern classification is a difficult task. However, if a particular data set is represented by discrete valued features, it becomes possible to determine empirically the contribution that each feature makes to the discrimination between classes. This paper extends the discrimination bound method so that both the maximum and average discrimination expected on unseen test data can be estimated. These estimation techniques are the basis of a backwards elimination algorithm that can be use to rank features in order of their discriminative power. Two problems are used to demonstrate this feature selection process: classification of the Mushroom Database, and a real-world, pregnancy related medical risk prediction task - assessment of risk of perinatal death.

Teaching reflection for service-learning

In this chapter, we discuss an approach for teaching pre-service teachers how to critically reflect on their experiences in a Service-learning program in an advanced subject about inclusive education. The approach was informed by critical social theory, with the expectation that students would engage in transformational learning. By explicitly teaching the students to engage in critical reflective thinking (Fishbowl discussions) and examine the depth of their critical reflection against a heuristic (the 4Rs reflection framework), the final-year Bachelor of Education students were able to gain a deeper understanding of the subject and experience transformational learning. We provide contextual information about the Service-learning program and discuss critical social theory for transformational learning, as well as how the teaching team taught critical reflection. Based on the evidence gathered from the students, we consider lessons learned by the teaching team and provide recommendations for teaching reflection in Service-learning programs.

A model for reflection in the pedagogic field of higher education

This chapter provides an introduction to the use of pedagogical patterns in capturing and sharing educational design experience. In higher education, helping students to learn to engage in productive reflection presents a complex set of challenges. Delicate balances must be found: too little structure and support for students’ reflective work can leave them floundering; too much, and some will remain dependent. Moreover, this is a dynamic teaching problem – scaffolding needs to be adjusted as students develop confidence and capability, which they will do at different rates. The model presented in this chapter embraces the three main elements that teachers can legitimately design, or help set in place, to support their students’ reflective activity: good tasks, the right tools, and appropriate divisions of labour. It delineates a complex, shifting architecture of tasks, tools and people, activities and outcomes associated with reflective learning. It shows how the designable elements of this complex mix can be described in patterns and pattern languages, which then become design resources for teachers’ own action, reflection and professional development.

Further development of discrete computational techniques for calculation of restricted diffusion propagators in porous media

Magnetic resonance is a well-established tool for structural characterisation of porous media. Features of pore-space morphology can be inferred from NMR diffusion-diffraction plots or the time-dependence of the apparent diffusion coefficient. Diffusion NMR signal attenuation can be computed from the restricted diffusion propagator, which describes the distribution of diffusing particles for a given starting position and diffusion time. We present two techniques for efficient evaluation of restricted diffusion propagators for use in NMR porous-media characterisation. The first is the Lattice Path Count (LPC). Its physical essence is that the restricted diffusion propagator connecting points A and B in time t is proportional to the number of distinct length-t paths from A to B. By using a discrete lattice, the number of such paths can be counted exactly. The second technique is the Markov transition matrix (MTM). The matrix represents the probabilities of jumps between every pair of lattice nodes within a single timestep. The propagator for an arbitrary diffusion time can be calculated as the appropriate matrix power. For periodic geometries, the transition matrix needs to be defined only for a single unit cell. This makes MTM ideally suited for periodic systems. Both LPC and MTM are closely related to existing computational techniques: LPC, to combinatorial techniques; and MTM, to the Fokker-Planck master equation. The relationship between LPC, MTM and other computational techniques is briefly discussed in the paper. Both LPC and MTM perform favourably compared to Monte Carlo sampling, yielding highly accurate and almost noiseless restricted diffusion propagators. Initial tests indicate that their computational performance is comparable to that of finite element methods. Both LPC and MTM can be applied to complicated pore-space geometries with no analytic solution. We discuss the new methods in the context of diffusion propagator calculation in porous materials and model biological tissues.