Imbalance of IL-2, IFN-gamma and IL-10 secretion in the immunosuppression associated with human paracoccidioidomycosis

Patients with paracoccidioidomycosis (PCM) display a certain degree of immunecompromise characterized by lymphocyte hyporesponsiveness to the main Paracoccidioides brasiliensis antigen (gp43). To determine whether cytokines are involved in this state, we evaluated the secretion of IL-2, IL-10 and IFN-gamma by peripheral blood mononuclear cells (PBMC) from patients with the acute (AF) and chronic (CF) forms of PCM and from healthy, P. brasiliensis-sensitized subjects. gp43-stimulated PBMC from healthy subjects produced substantial amounts of IL-2, IFN-gamma and IL-10, whereas PBMC from AF and CF patients produced low levels of IL-2 and IFN-gamma but substantial amounts of IL-10, Phytohaemagglutinin-induced cytokine secretion was comparable among AF and CF patients and healthy subjects, suggesting integrity of non-specific cellular immune mechanisms in PCM. gp43-pulsed adherent cells, but not non-adherent cells, mere the main source of IL-10, Moreover, IL-2 and IFN-gamma secretion correlated inversely with the amount of specific antibodies produced by patients and healthy subjects. Our results suggest that the imbalance in cytokine production of patients with PCM plays a role in the gp43-hyporesponsiveness and the marked (non-protective) antibody production of these patients. (C) 2001 Academic Press.

Effects of biofertilizer rates on the structural, morphogenetic and productive characteristics of Piata grass

The objective of this study was to investigate the influence of different levels of biofertilizers from cattle and swine manure on the structural, morphogenetic and productive characteristics of Brachiaria brizantha cv. Piata. The experiment was arranged in a completely randomized factorial design with split plots. The plots were defined by eight treatments: two biofertilizers (cattle and swine), four levels (0, 100, 200 and 300 kg N.ha(-1)) and subplots by four different cutting periods. The cutting for plant uniformity was performed at 45 days after sowing at 15 cm above the soil surface. The biofertilizeres were applied in a single level, after the cutting of plants, in rates of 0, 0.23 and 0.19, 0.45 and 0.38, 0.68 and 0.57 liters pot(-1) for the biofertilizers from cattle and swine manure, respectively. These rates were also equivalent to levels of 0, 100, 200 and 300 kg N.ha(-1). There was no significant difference between the types of biofertilizers as there was no interaction between them and the different levels, hence both biofertilizers could be applied without any loss of nutrient intake by the plants used in this experiment. There was a significant difference between the production of green and dry matter, the leaf appearance rate, phyllochron, leaf and pseudostem elongation rates, number of green leaves, final leaf length, number and weight of tillers, according to the increase of nitrogen rates, following linear prediction model. Effect of the cutting periods was also observed, once the plants harvested during the summer presented greater performance of structural and morphogenetic characteristics.

High-density nanoparticle ceramic bodies: A study of heating rates in the sinterization of Gadolinium-doped Ceria

An investigation on the sinterization of Gd:CeO2 (Ce 0.85Gd0.15O1.9-δ ceramic system) 3-10 nm nanoparticles in pressed bodies was done. The heating rate was taken as a key parameter and two competing sinterization processes were identified, associated with different diffusional mechanisms. Using heating rates of 113 C min -1, a high-final density (98 % of the theoretical) was obtained by superposing the two aforementioned mechanisms, resulting in a homogeneous microstructure at lower temperatures. © 2012 Akadémiai Kiadó, Budapest, Hungary.

Cost-center approach to liner conference freight rates

Includes bibliography

Competition and complementarity between road and rail transport in the carriage of freight

A seminar on competition and complementarity between road and rail transport in the carriage of freight was conducted at ECLAC Headquarters on 6-7 November 2001. The seminar was attended by experts on transport matters from a range of countries, and their presentations covered the current state of integration of transport in countries like Argentina, Brazil, Chile and Mexico. Also in attendance was an expert from Central America, who spoke about modal integration of freight transport in that region. Three round-table discussions were held with the participation of representatives of the trucking and rail sectors, drawn from both the private and public spheres.

Causes and consequences of low rates of specialisation in science and technology in CDCC member countries

The importance of science and technology (S&T) in Small Island Developing States (SIDS) is clearly articulated in Chapter XI, paragraphs 57, 58, 61 and 62 of the Mauritius Strategy for the Further Implementation of the Programme of Action for Sustainable Development of Small Island Developing States (MSI). At the regional level, the Heads of Government of the Caribbean Community (CARICOM) noted the challenge that CARICOM member States face in competing in this new international economic environment in which the impact of scientific and technological change has created a knowledge-based global economy. Given the importance of S&T to development of Caribbean SIDS, the Economic Commission for Latin America and the Caribbean (ECLAC) Subregional Headquarters for the Caribbean embarked on a study to determine the causes and consequences of low rates of specialisation in S&T with a view to making recommendations for development of strategies for addressing these challenges. Data on postgraduate (Master of Science, Master of Philosophy and Doctor of Philosophy) enrolment and graduation in agriculture, engineering and the sciences from the three campuses of the University of the West Indies (UWI) as well as from the University of Technology in Jamaica and the University of Trinidad and Tobago (UTT) were examined and analysed. Face-to-face interviews were also held with key personnel from these institutions and a questionnaire was also served to individuals in key institutions. Results of the study revealed that although the number of students enrolled in higher degree programmes has increased in absolute terms, they are decreasing in relative terms. However, enrolment in agriculture has indeed declined while enrolment rates in engineering, although increasing, were not significantly high. Market forces have proved to be a main reason for this trend while facilities for the conduct and supervision of cutting-edge research, the disconnect between science and industry and societal labelling of scientists as “misfits” are also contributing to the situation. This has resulted in a reduced desire by students at all levels of the school system and faculty to be involved in S&T; lack of innovation; a better staffed private, as compared with public, sector; and poor remuneration in science-based employment. There also appears to be a gender bias in enrolment with more males than females being enrolled in engineering while the opposite is apparent in agriculture and the sciences. Recommendations for remedying this situation range from increasing investment in S&T, creating linkages between science and industry as well as with the international community, raising awareness of the value of S&T at all levels of the education system to informing policy to stimulate the science – innovation interface so as to promote intellectual property rights.

Determination of reactivity rates of silicate particle-size fractions

The efficiency of sources used for soil acidity correction depends on reactivity rate (RR) and neutralization power (NP), indicated by effective calcium carbonate (ECC). Few studies establish relative efficiency of reactivity (RER) for silicate particle-size fractions, therefore, the RER applied for lime are used. This study aimed to evaluate the reactivity of silicate materials affected by particle size throughout incubation periods in comparison to lime, and to calculate the RER for silicate particle-size fractions. Six correction sources were evaluated: three slags from distinct origins, dolomitic and calcitic lime separated into four particle-size fractions (2, 0.84, 0.30 and <0.30-mm sieves), and wollastonite, as an additional treatment. The treatments were applied to three soils with different texture classes. The dose of neutralizing material (calcium and magnesium oxides) was applied at equal quantities, and the only variation was the particle-size material. After a 90-day incubation period, the RER was calculated for each particle-size fraction, as well as the RR and ECC of each source. The neutralization of soil acidity of the same particle-size fraction for different sources showed distinct solubility and a distinct reaction between silicates and lime. The RER for slag were higher than the limits established by Brazilian legislation, indicating that the method used for limes should not be used for the slags studied here.

NUTRITIONAL STATUS AND DRY MASS PRODUCTION OF ALFALFA IN FUNCTION OF POTASSIUM RATES IN TWO SOILS

Potassium fertilization is very important to alfalfa crop in terms of yield, quality and persistence of forage, especially on soils naturally poor K. Thus, to assess the effects of K fertilization in alfalfa production and nutritional status, was carried out an experiment in a greenhouse using samples of a Dystrophic Oxisol medium texture (LV) (0.6 mmol(c) dm(-3) K) and a Dystrophic Ultisol sandy/medium texture (PVA) (2.2 mmol(c) dm(-3) K). A completely randomized design in a factorial arrangement 6 x 2 (six K rates and two soils) was used, with four replications. The K rates used were: 0, 25, 50, 100, 150 and 200 mg kg(-1) K. Potassium fertilization increased K content in soil and shoots. Dry matter production was increased with the K addition. However, in the PVA, this occurred only in the second cut. In LV, potassium fertilization increased N concentration in alfalfa shoots in both cuts. Plants with K concentration around 10 g kg(-1) had typical symptoms of this nutrient deficiency. The K critical levels of K in soil and shoots were 1.8 mmolc dm(-3) and 16.7 g kg(-1), respectively.

Andropogon grass consortium with stylo in two times: the forage response and sources of phosphorus rates

The use of legumes intercropped with forage in the Brazilian savannah (Cerrado) region is an alternative to reverse the process of pasture degradation. The natural phosphorus deficiency in this region and the high retention capacity of this nutrient in the soil are factors that directly affect the sustainability of the production system. The objective of this study was to evaluate the effect of a phosphate with medium solubility (Arad) compared to more soluble sources such as triple superphosphate and mono-ammonium phosphate, on the formation and maintenance of pastures of Andropogon gayanus with or without the introduction of Stylosantes guianensis in pasture already established in the Brazilian savannah. Two experiments were carried out under field conditions in an Oxisol using a randomized block design with split plots, plots with two sources of phosphorus (Arad and super-triple or MAP) and subplots with different levels of phosphorus. The study showed that andropogon grass, even though characterised as forage requiring low fertilization, responded to increased fertilization, especially with the use of more soluble sources of P at planting. From the second year on, with the introduction of Stylosantes guianensis, verified effects were seen on legumes in their efficiency of utilization of residual fertilization from the first year; however, this didn't affect legume dry matter production resulting from the P sources used for the andropogon grass. The mixed stands of andropogon grass and Stylosantes guianensis made it more advantageous to increase the P sources using phosphate fertilizer with lower solubility (Arad), when compared to MAP.

Solidification thermal parameters and dendritic growth during the horizontal directional solidification of Al-7wt.%Si alloy

O principal objetivo desse trabalho é investigar a influência dos parâmetros térmicos velocidade de solidificação (V_L) e taxa de resfriamento (T_R), nos espaçamentos dendríticos primários (λ₁) da liga hipoeutética Al-7%Si, durante a solidificação direcional horizontal, em regime transiente. Os valores de λ₁ foram medidos ao longo do comprimento do lingote e correlacionados com esses parâmetros. A variação dos espaçamentos dendríticos estudados é expressa por meio de funções na forma de potência de V_Le T_Rdadas, respectivamente, por λ₁= 55(V_L)^-1.1e λ₁= 212 (T_R)^-0.55. Um estudo comparativo é realizado entre os resultados encontrados nesse trabalho e aqueles obtidos para a mesma liga quando solidificada direcionalmente nos sistemas verticais ascendente e descendente, sob as mesmas condições assumidas. Finalmente, os resultados experimentais obtidos são comparados com valores fornecidos por alguns modelos teóricos propostos na literatura para analisar espaçamentos dendríticos primários.

The evolution of mating rates in Pieris napi

In the green-veined white butterfly (Pieris napi), females obtain direct fitness benefits from mating multiply and studies have shown that fitness increases seemingly monotonically with number of matings. The reason is that at mating males transfer a large nutritious gift (a so called nuptial gift) to the females that the females use to increase both their fecundity and lifespan. In addition, if exposed to poor food conditions as larvae, females mature at a smaller size compared to males. Accordingly, it was suggested that smaller females could compensate for their size through nuptial feeding by, for instance, mating more frequently. We did not find any support for that hypothesis. On the contrary, larger females remated sooner and had a higher lifetime number of matings. Neither were smaller females able to compensate in any other way, because singly mated females and multiply mated females suffered to the same extent from their smaller size. This thesis also shows that despite the positive relationship between fitness and number of matings, there is a large variation in female mating frequency in wild populations and about every second female mates only once or twice. This variation is not dependent on how often females get courted by males, because female mating frequency was shown not to be affected by male courtship intensity. Hence, the reason for the low mating frequency could either be that males have evolved the ability to manipulate females to mate at a suboptimal rate as a measure of protection against sperm competition, or alternatively, that female mating rate is suppressed by some costs. Using two selection lines, artificially selected for either a high or a low mating rate, we showed that the variation in mating rate was mainly a female trait because which line the females were from affected their mating rate whereas which line the male was from did not. This implies that females mate at a low rate due to hidden costs or due to constraints. The same study also showed that females with a high "intrinsic" mating rate lived shorter, but only when denied remating. This led us to test the hypothesis that the cost females face is to have the ability to mate at a high rate but the cost is only paid when remating opportunities are scarce. However, we found no support for such an idea, because females with a high intrinsic mating rate held in a cold environment where the butterflies were prevented from flying and feeding did not live shorter. Neither was there an effect of a female’s mating rate on her ability to quickly break down and convert male nutrient gifts into egg material. Female mating rate did, on the other hand, affect dispersal tendency, with low mating rate females being more inclined to fly between different habitats. The underlying reason for this is still to be explored.