Obtenção de superligas NiCrAIY nanoestruturadas por moagem de alta energia e sua aplicação por aspersão térmica hipersônica (HVOF)

Esta dissertação tem como objetivos o estudo da produção de uma liga metálica nanoestruturada através do processo de moagem de alta energia, determinar a evolução microestrutural desta liga metálica durante o seu processamento e sua utilização na forma de revestimento protetor, depositado por aspersão térmica HVOF. O material escolhido foi a superliga NiCrAlY devido a sua grande importância tecnológica e pela pequena quantidade de trabalhos publicados até o momento sobre a produção e o emprego desta liga na forma nanoestruturada. A superliga NiCrAlY foi processada através de um moinho de alta energia do tipo Szegvari, empregando-se esferas de aço AISI 52100 como meio de moagem, em 3 diferentes condições de agitação e 3 relações entre meio de moagem/material. O material processado foi caracterizado através de diferentes métodos de análise, segundo critérios como: i) morfologia, caracterizada através de microscopia eletrônica de varredura e granulometria por difração de laser, ii) tamanho de cristalito, através da análise do alargamento dos picos de difração de raios X pelo método single-line, iii) nível de contaminação por Fe, determinado através da análise por fluorescência de raios X. Revestimentos protetores foram depositados através do processo de aspersão térmica HVOF sobre substratos de aço inox AISI 304 para o estudo dos parâmetros de deposição e controle microestrutural dos revestimentos, com o objetivo de manter o tamanho de cristalito nanométrico das partículas após a deposição Os resultados mostram que o processo de moagem de alta energia provoca uma profunda alteração na morfologia das partículas, originando partículas achatadas e pequenos fragmentos, além de uma rápida redução do tamanho de cristalito, atingindo valores menores do que 20 nm nas primeiras horas de processamento. A microestrutura dos revestimentos depositados apresenta-se com um caráter lamelar acentuado, devido ao formato pré-aspersão das partículas, e uma microestrutura densa com uma quantidade relativamente grande de óxidos interlamelares. Também foi constatado que o processo de deposição dos revestimentos por aspersão térmica HVOF leva a um crescimento no tamanho dos cristalitos das partículas, mas é capaz de manter o tamanho dos cristalitos inferior a 100 nm após a deposição, levando a um revestimento com microdureza Vickers 35% superior com relação ao revestimento depositado com o material convencional.

Análise de sensibilidade aplicada a uma planta térmica de geração de potência

Este trabalho tem o objetivo de realizar uma análise de sensibilidade dos parâmetros operacionais e de projeto de uma usina termelétrica. A análise de sensibilidade serve para indicar qual a importância dessas grandezas no resultado do sistema. A planta modelada é a da Usina Termelétrica Presidente Médici – Fase B, localizada em Candiota, RS, onde cada módulo é capaz de produzir até 160 MW de potência. Para esta planta é apresentado o equacionamento de cada componente do sistema. Destacam-se duas modelagens para a turbina a vapor, usadas para a simulação de seu comportamento em carga parcial, o da Elipse de Stodola e o de Schegliáiev. Ambos os modelos são comparados. Também são apresentados os modos de controle de carga por válvula de estrangulamento, por válvula de bocais e por pressão deslizante. A análise de sensibilidade é feita por meio de três métodos distintos, cujos resultados são comparados. O Método Diferencial utiliza as derivadas parciais para estimar a sensibilidade. O Método de Monte Carlo realiza uma série de avaliações do sistema, com os dados de entrada gerados randomicamente em cada avaliação e análise estatística dos resultados para avaliar a sensibilidade das respostas. É desenvolvido neste trabalho o Método da Transformada de Fourier, que gera os dados de forma senoidal e utiliza a transformada de Fourier para medir as sensibilidades. A medida da sensibilidade é feita através de dois índices. O índice de importância é a derivada parcial de um resultado em relação a um parâmetro, adimensionalizado pelas médias das variáveis, e o índice de sensibilidade é a composição fracional da variância de um resultado. Como conclusão, observa-se que os modelos para operação em carga parcial da turbina de Schegliáiev e de Stodola produzem praticamente os mesmos resultados. Os três métodos de análise de sensibilidade conduzem aos mesmos índices de sensibilidade no caso estudado. A ordenação da importância dos parâmetros estudados é idêntica quando se usa tanto o índice de importância quanto o de sensibilidade, mesmo seus valores sejam diferentes para cada parâmetros.

A influência do tipo de envidraçados e da inércia térmica dos materiais na prevenção de situações de sobreaquecimento no verão: uma análise baseada no RCCTE

A importância dos vãos envidraçados deve-se não só à sua contribuição para o isolamento térmico da habitação, mas também, por permitirem obter uma otimização dos ganhos solares, maximizando-os no inverno e minimizando-os no verão, contribuindo deste modo para a melhoria das condições de conforto e diminuição dos consumos energéticos. Sendo os vãos envidraçados elementos bastante favoráveis às trocas de calor, tornase necessário conhecer de que forma as diferentes soluções envidraçadas existentes no mercado, e proteções solares/oclusão noturna, podem influenciar o desempenho térmico dos edifícios. Com a crescente tendência de utilização do vidro na construção torna-se ainda mais importante uma escolha criteriosa das soluções para os vãos envidraçados. Este trabalho contribui para a avaliação da influência do tipo de envidraçados e da inércia térmica dos materiais, na prevenção de situações de sobreaquecimento no verão, com base no RCCTE (Regulamento das Características de Comportamento Térmico dos Edifícios), bem como para identificar a melhor relação custo/benefício das soluções. Como caso de estudo, considerou-se uma moradia unifamiliar, simulando diferentes soluções envidraçadas e analisado o seu impacto na moradia. A metodologia consistiu numa análise paramétrica e económica, sustentada no RCCTE e direcionada para a influência dos envidraçados na prevenção do sobreaquecimento no verão. Para a análise da viabilidade económica das soluções propostas, recorreu-se à metodologia definida pela ADENE (Agência para a Energia), pelo cálculo dos custos de exploração e períodos de retorno do investimento, e também o método VAL (Valor Atual Líquido) que pressupõe uma análise do investimento ao longo do tempo. Com este trabalho, conclui-se que um projeto cuidado dos vãos envidraçados e uma seleção criteriosa dos elementos construtivos, aliados a uma análise inerente ao custo/benefício, contribui significativamente para a escolha adequada das soluções construtivas a adotar, de forma a privilegiar o conforto térmico, o desempenho energético dos edifícios e a conservação de energia.

Modos projetuais de simulação: uso de ferramentas de simulação térmica no processo projetual de arquitetura

This thesis aims to describe and demonstrate the developed concept to facilitate the use of thermal simulation tools during the building design process. Despite the impact of architectural elements on the performance of buildings, some influential decisions are frequently based solely on qualitative information. Even though such design support is adequate for most decisions, the designer will eventually have doubts concerning the performance of some design decisions. These situations will require some kind of additional knowledge to be properly approached. The concept of designerly ways of simulating focuses on the formulation and solution of design dilemmas, which are doubts about the design that cannot be fully understood nor solved without using quantitative information. The concept intends to combine the power of analysis from computer simulation tools with the capacity of synthesis from architects. Three types of simulation tools are considered: solar analysis, thermal/energy simulation and CFD. Design dilemmas are formulated and framed according to the architect s reflection process about performance aspects. Throughout the thesis, the problem is investigated in three fields: professional, technical and theoretical fields. This approach on distinct parts of the problem aimed to i) characterize different professional categories with regards to their design practice and use of tools, ii) investigate preceding researchers on the use of simulation tools and iii) draw analogies between the proposed concept, and some concepts developed or described in previous works about design theory. The proposed concept was tested in eight design dilemmas extracted from three case studies in the Netherlands. The three investigated processes are houses designed by Dutch architectural firms. Relevant information and criteria from each case study were obtained through interviews and conversations with the involved architects. The practical application, despite its success in the research context, allowed the identification of some applicability limitations of the concept, concerning the architects need to have technical knowledge and the actual evolution stage of simulation tools

Síntese, caracterização e cinética da decomposição térmica dos materiais cerâmicos PrMO3 (M = Ni ou Co)

In this work have been studied the preparation, characterization and kinetic study of decomposition of the polymerizing agent used in the synthesis under non-isothermal condition ceramics PrMO3 of general formula (M = Co and Ni). These materials were obtained starting from the respective metal nitrates, as a cations source, and making use of gelatin as polymerizing agent. The powders were calcined at temperatures of 500°C, 700°C and 900°C and characterized by X-ray Diffraction (XRD), Thermogravimetric Analysis (TG / DTG/ DTA), Infrared Spectroscopy (FTIR), Temperature Programmed Reduction (TPR) and Scanning Electron Microscopy (SEM). The perovskite phase was detected in all the X-rays patterns. In the infrared spectroscopy observed the oxide formation as the calcination temperature increases with the appearance of the band metal - oxygen. The images of SEM revealed uniform distribution for the PrCoO3 and particles agglomerated as consequence of particle size for PrNiO3. From the data of thermal analysis, the kinetics of decomposition of organic matter was employed using the kinetics methods called Model Free Kinetics and Flynn and Wall, in the heating ratios 10, 20 and 30° C.min-1 between room temperature and 700°C. Finally, been obtained the values of activation energy for the region of greatest decomposition of organic matter in samples that were determined by the degree of conversion (α)

Adição do resíduo de biomassa da cana-de-açúcar em pastas para cimentação de poços petrolíferos produtores de óleos pesados

The Potiguar basin has large fields of viscous oil where the used method for recovering is based on vapor injection; this operation is carried out by injecting vapor in the oilwell directly, without the protection of a revetment through thermal insulation, what causes its dilation and, consequently, cracks in the cement placed on the annular, and lost of hydraulic insulation; this crack is occasioned by the phenomenon of retrogression of the compressive resistance due to the conversion of the hydrated calcium silicate in phases calcium-rich, caused by the high temperatures in the wells, subjected to thermal recuperation. This work has evaluated the application of composite pastes with addition of residue of biomass of ground sugar-cane bagasse as anti-retrogression mineral admixture for cementation of oil-wells subjected to thermal recuperation. The addition of the mineral residue was carried out considering a relative amount of 10, 20, 30, 40 and 59% in relation to cement mass, trying to improve the microstructure of the paste, still being developed a reference paste only with cement and a paste with addition of 40% of silica flour - renowned material in the oil industry as anti-retrogression additive. Pozzolanic activity of the ash was evaluated through XRD, TG/DTG, as the resistance to compression, and it was also determined the physical and mechanical behavior of the pastes when submitted to cure at low temperatures (22 and 38º C); besides it was evaluated the behavior of the pastes when submitted to two cycles of cure at high temperature (280ºC) and pressure (7 MPa). It was verified that the ash of the sugar-cane biomass presents pozzolanic reaction and has great efficiency in decrease the permeability of the paste by filler effect, as well as that addition of ash in a relative amount of 10, 20 e 30% increases cured compressive resistance at low temperatures. It was also showed that the ash in a relative amount of 40% and 59% has very significant efficiency as anti-retrogression additive, since it prevents the decrease of compressive resistance and forms hydrated calcium silicate type xenotlita and tobermorita which have more resistance and stability in high temperatures

Revestimentos a base de Ta/Al2O3 produzidos por aspersão térmica sobre substrato metálico

Metal substrates were coated by thermal spraying plasma torch, they were positioned at a distance of 4 and 5 cm from the nozzle exit of the plasma jet. The starting materials were used for deposition of tantalum oxide powder and aluminium. These two materials were mixed and ground into high-energy mill, then immersed in the torch for the production of alumina coating infused with particles of tantalum with nano and micrometric size. The spraying equipment used is a plasma torch arc not transferred, which operating in the range of 250 A and 80 V, was able to produce enough heat to ignite aluminothermic between Ta2O5 and aluminum. Upon reaching the plasma jet, the mixing powders react with the heat of the blaze, which provides sufficient energy for melting aluminum particles. This energy is transferred through mechanisms of self-propagating to the oxide, beginning a reduction reaction, which then hits on the surface of the substrate and forms a coating on which a composite is formed by a junction metal - ceramic (Ta +Al2O3). The phases and quantification of each were obtained respectively by X-ray diffraction and the Rietveld method. Morphology by scanning electron microscopy and chemical analysis by energy dispersive spectroscopy EDS. It was also performed measurements of the substrate roughness, Vickers microhardness measurements in sprays and determination of the electron temperature of the plasma jet by optical emission spectroscopy EEO. The results confirmed the expectation generated around the end product of spraying the mixture Ta2O5 + Al, both in the formation of nano-sized particles and in their final form. The electron excitation temperature was consistent with the purpose of work, in addition, the thermodynamic temperature was efficient for the reduction process of Ta2O5. The electron excitation temperature showed values of 3000, 4500 and 8000 K for flows10, 20 and 30 l / min respectively, these values were taken at the nozzle exit of the plasma jet. The thermodynamic temperature around 1200 ° C, was effective in the reduction process of Ta2O5

Síntese de nanopartículas de magnetita via decomposição térmica em meio não-aquoso

This work aims at obtaining nanoparticles of iron oxide, the magnetite one (Fe3O4), via synthesis by thermal decomposition through polyol. Thus, two routes were evaluated: a simple decomposition route assisted by reflux and a hydrothermal route both without synthetic air atmosphere using a synthesis temperature of 260ºC. In this work observed the influence of the observe of surfactants which are generally applied in the synthesis of iron oxide nanoparticles decreasing cluster areas. Further, was observed pure magnetite phase without secondary phases generally found in the iron oxide synthesis, a better control of crystallite size, morphology, crystal structure and magnetic behavior. Finally, the introduction of hydroxyl groups on the nanoparticles surface was analyzed besides its employment in the polymer production with OH radicals. The obtained materials were characterized by XRD, DLS, VSM, TEM, TG and DSC analyses. The results for the magnetite obtainment with a particle size greater than 5 nm and smaller than 11 nm, well defined morphology and good magnetic properties with superparamagnetic behavior. The reflux synthesis was more efficient in the deposition of the hydroxyl groups on the nanoparticles surface

Conversão térmica e termocatalítica à baixa temperatura do óleo de girassol para obtenção de bio-óleo

The use of biofuels remotes to the eighteenth century, when Rudolf Diesel made the first trials using peanut oil as fuel in a compression ignition engine. Based on these trials, there was the need for some chemical change to vegetable oil. Among these chemical transformations, we can mention the cracking and transesterification. This work aims at conducting a study using the thermocatalytic and thermal cracking of sunflower oil, using the Al-MCM-41 catalyst. The material type mesoporous Al-MCM-41 was synthesized and characterized by Hydrothermical methods of X-ray diffraction, scanning electron microscopy, nitrogen adsorption, absorption spectroscopy in the infrared and thermal gravimetric analysis (TG / DTG).The study was conducted on the thermogravimetric behavior of sunflower oil on the mesoporous catalyst cited. Activation energy, conversion, and oil degradation as a function of temperature were estimated based on the integral curves of thermogravimetric analysis and the kinetic method of Vyazovkin. The mesoporous material Al-MCM-41 showed one-dimensional hexagonal formation. The study of the kinetic behavior of sunflower oil with the catalyst showed a lower activation energy against the activation energy of pure sunflower oil. Two liquid fractions of sunflower oil were obtained, both in thermal and thermocatalytic pyrolisis. The first fraction obtained was called bio-oil and the second fraction obtained was called acid fraction. The acid fraction collected, in thermal and thermocatalytic pyrolisis, showed very high level of acidity, which is why it was called acid fraction. The first fraction was collected bio-called because it presented results in the range similar to petroleum diesel

Pirólise térmica e catalítica de resíduos de vácuo gerados no refino de petróleo

In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste

Avaliação térmica dos resíduos da destilação atmosférica das blendas - biodiesel/diesel

The worldwide concern regarding the use of sustainable energy and preserving the environment are determining factors in the search for resources and alternative sources of energy and therefore fuel less aggressive nature. In response to these difficulties Biodiesel has emerged as a good solution because it is produced from renewable sources, produces burns cleaner and is easily reproducible. This work was synthesized with biodiesel oil, sunflower via homogeneous catalysis in the presence of KOH, with and without the use of BHT and subsequently added to the blends BX (a proportion of biodiesel X = 5, 10, 15 and 20 %). Atmospheric distillation of the analysis, performed in blends with and without BHT were collected residue generated by each sample and performed a study heat from the thermogravimetric analysis at a heating rate of 10 °C*min-1, nitrogen atmosphere and heating to 600 °C. According to the specifications of Resolution N 7/2008 for biodiesel, it was found that the synthesized material was in accordance with the specifications. For blends showed that the samples are in accordance with the Resolution of ANP N 42/2009. From the TG / DTG curves of the samples of biodiesel, blends and waste can be seen that these show a single loss of thermal decomposition concerning constituents present in each sample. The blends without BHT with ratios of 5%, 10% and 15% biodiesel showed a lower amount of waste (1,07%; 1,09% e 1,10%) to mineral diesel (1,15%). Therefore, it is concluded that the addition of biodiesel with diesel mineral can improve some physico-chemical parameters, but also, depending on the added amount, decreasing the amount of waste generated. This fact is of great importance because the carbonaceous residue can cause problems in mechanical equipment and parts for vehicles, causing more frequent maintenance, and this is not desirable

Avaliação da efetividade de estratégias não farmacológicas para o alívio da dor de parturientes na fase ativa do período de dilatação no trabalho de parto

This study was aim to evaluate the effectiveness of strategies non pharmacological for the relief of the intensity of the parturient pain in the phase activates of the dilation period in the labor. Is a clinic rehearse of the type therapeutic intervention before and after" with a quantitative approach, accomplished in the Humanized Unit of Childbirth of the Maternity Januário Cicco School of the Federal University of Rio Grande do Norte, in Natal/RN, whit 130 parturient, being 30 in the pre-test of the strategies and 100 in the application of the strategies non pharmacological combined (breathing exercises, muscular relaxation and lombossacral massage) and isolated (shower bath in a normal temperature). We used the visual analogical scale to evaluate the intensity of the pain of the study parturient before and after" to the application of the strategies in the phases of acceleration, maximum inclination and desaceleration in the phase activates of dilation period in the labor. The principal results showed that the majority of the study parturient was between 20 to 30 years old (60%); with incomplete fundamental teaching (85%); family income until 2 minimum wages (74%); 78% had a companion and these, 44% were the own husband. The oxytocin was administered in the parturient during the phase activates of the labor in 81% of the cases and only 15% these women didn´t reciev anything medication. We verified significant relief (ρ=0.000) of intensity of the pain of the study parturient after application of the strategies non pharmacological combined and isolated. We concluded that the strategies non pharmacological combined and isolated were effective in the relief of the pain of the study parturient in the phase activates de labor