A NEW DC UPS FOR DC POWER DISTRIBUTION SYSTEM IN DATA CENTER

In recent years, the 380V DC and 48V DC distribution systems have been extensively studied for the latest data centers. It is widely believed that the 380V DC system is a very promising candidate because of its lower cable cost compared to the 48V DC system. However, previous studies have not adequately addressed the low reliability issue with the 380V DC systems due to large amount of series connected batteries. In this thesis, a quantitative comparison for the two systems has been presented in terms of efficiency, reliability and cost. A new multi-port DC UPS with both high voltage output and low voltage output is proposed. When utility ac is available, it delivers power to the load through its high voltage output and charges the battery through its low voltage output. When utility ac is off, it boosts the low battery voltage and delivers power to the load form the battery. Thus, the advantages of both systems are combined and the disadvantages of them are avoided. High efficiency is also achieved as only one converter is working in either situation. Details about the design and analysis of the new UPS are presented. For the main AC-DC part of the new UPS, a novel bridgeless three-level single-stage AC-DC converter is proposed. It eliminates the auxiliary circuit for balancing the capacitor voltages and the two bridge rectifier diodes in previous topology. Zero voltage switching, high power factor, and low component stresses are achieved with this topology. Compared to previous topologies, the proposed converter has a lower cost, higher reliability, and higher efficiency. The steady state operation of the converter is analyzed and a decoupled model is proposed for the converter. For the battery side converter as a part of the new UPS, a ZVS bidirectional DC-DC converter based on self-sustained oscillation control is proposed. Frequency control is used to ensure the ZVS operation of all four switches and phase shift control is employed to regulate the converter output power. Detailed analysis of the steady state operation and design of the converter are presented. Theoretical, simulation, and experimental results are presented to verify the effectiveness of the proposed concepts.

Composizione dinamica di funzioni di rete virtuali in ambienti cloud

Questo documento si interroga sulle nuove possibilità offerte agli operatori del mondo delle Reti di Telecomunicazioni dai paradigmi di Network Functions Virtualization, Cloud Computing e Software Defined Networking: questi sono nuovi approcci che permettono la creazione di reti dinamiche e altamente programmabili, senza disdegnare troppo il lato prestazionale. L'intento finale è valutare se con un approccio di questo genere si possano implementare dinamicamente delle concatenazioni di servizi di rete e se le prestazioni finali rispecchiano ciò che viene teorizzato dai suddetti paradigmi. Tutto ciò viene valutato per cercare una soluzione efficace al problema dell'ossificazione di Internet: infatti le applicazioni di rete, dette middle-boxes, comportano costi elevati, situazioni di dipendenza dal vendor e staticità delle reti stesse, portando all'impossibilità per i providers di sviluppare nuovi servizi. Il caso di studio si basa proprio su una rete che implementa questi nuovi paradigmi: si farà infatti riferimento a due diverse topologie, una relativa al Livello L2 del modello OSI (cioè lo strato di collegamento) e una al Livello L3 (strato di rete). Le misure effettuate infine mostrano come le potenzialità teorizzate siano decisamente interessanti e innovative, aprendo un ventaglio di infinite possibilità per il futuro sviluppo di questo settore.

Content and Context Aware Strategies for QoS Support in VANETs

The increasing interest in autonomous coordinated driving and in proactive safety services, exploiting the wealth of sensing and computing resources which are gradually permeating the urban and vehicular environments, is making provisioning of high levels of QoS in vehicular networks an urgent issue. At the same time, the spreading model of a smart car, with a wealth of infotainment applications, calls for architectures for vehicular communications capable of supporting traffic with a diverse set of performance requirements. So far efforts focused on enabling a single specific QoS level. But the issues of how to support traffic with tight QoS requirements (no packet loss, and delays inferior to 1ms), and of designing a system capable at the same time of efficiently sustaining such traffic together with traffic from infotainment applications, are still open. In this paper we present the approach taken by the CONTACT project to tackle these issues. The goal of the project is to investigate how a VANET architecture, which integrates content-centric networking, software-defined networking, and context aware floating content schemes, can properly support the very diverse set of applications and services currently envisioned for the vehicular environment.

Alternative per la configurazione dell'infrastruttura di rete in piattaforme Openstack

In questo scritto si analizzeranno alcune alternative nella configurazione di rete della piattaforma di cloud computing open source OpenStack. Verrà mostrata un’ installazione in ambiente di laboratorio di un cluster completo basato sulla release Liberty di Openstack, per poi modificarne la componente dedicata al Networking in modo da sfruttare diversi plugin e diversi protocolli. Si osserverà il traffico generato all’interno e verso l’esterno del sistema Openstack in modo da avere un quadro generale del comportamento dell’infrastruttura.

The Impact of office productivity cloud computing on energy consumption and greenhouse gas emissions

Cloud computing is usually regarded as being energy efficient and thus emitting less greenhouse gases (GHG) than traditional forms of computing. When the energy consumption of Microsoft’s cloud computing Office 365 (O365) and traditional Office 2010 (O2010) software suites were tested and modeled, some cloud services were found to consume more energy than the traditional form. The developed model in this research took into consideration the energy consumption at the three main stages of data transmission; data center, network, and end user device. Comparable products from each suite were selected and activities were defined for each product to represent a different computing type. Microsoft provided highly confidential data for the data center stage, while the networking and user device stages were measured directly. A new measurement and software apportionment approach was defined and utilized allowing the power consumption of cloud services to be directly measured for the user device stage. Results indicated that cloud computing is more energy efficient for Excel and Outlook which consumed less energy and emitted less GHG than the standalone counterpart. The power consumption of the cloud based Outlook (8%) and Excel (17%) was lower than their traditional counterparts. However, the power consumption of the cloud version of Word was 17% higher than its traditional equivalent. A third mixed access method was also measured for Word which emitted 5% more GHG than the traditional version. It is evident that cloud computing may not provide a unified way forward to reduce energy consumption and GHG. Direct conversion from the standalone package into the cloud provision platform can now consider energy and GHG emissions at the software development and cloud service design stage using the methods described in this research.

L3-arpsec - módulo seguro para controle e proteção do protocolo de resolução de endereços em redes definidas por software

Pós-graduação em Engenharia Elétrica - FEIS

Software per l'analisi di Big Data su più livelli e sua applicazione a tracce di Google

Con l'avanzare della tecnologia, i Big Data hanno assunto un ruolo importante. In questo lavoro è stato implementato, in linguaggio Java, un software volto alla analisi dei Big Data mediante R e Hadoop/MapReduce. Il software è stato utilizzato per analizzare le tracce rilasciate da Google, riguardanti il funzionamento dei suoi data center.

Criminal Liability of Organizations, Corporations, Legal Persons, and Similar Entities on Law of Portuguese Cybercrime: A Brief Discussion on the Issue of Crimes of “False Information,” the “Damage on Other Programs or Computer Data,” the “Computer-Software Sabotage,” the “Illegitimate Access,” the “Unlawful Interception,” and “Illegitimate Reproduction of the Protected Program”

Abstract: in Portugal, and in much of the legal systems of Europe, «legal persons» are likely to be criminally responsibilities also for cybercrimes. Like for example the following crimes: «false information»; «damage on other programs or computer data»; «computer-software sabotage»; «illegitimate access»; «unlawful interception» and «illegitimate reproduction of protected program». However, in Portugal, have many exceptions. Exceptions to the «question of criminal liability» of «legal persons». Some «legal persons» can not be blamed for cybercrime. The legislature did not leave! These «legal persons» are v.g. the following («public entities»): legal persons under public law, which include the public business entities; entities utilities, regardless of ownership; or other legal persons exercising public powers. In other words, and again as an example, a Portuguese public university or a private concessionaire of a public service in Portugal, can not commit (in Portugal) any one of cybercrime pointed. Fair? Unfair. All laws should provide that all legal persons can commit cybercrimes. PS: resumo do artigo em inglês.

Manual de uso del software Ocean Data View (ODV)

El presente manual de uso del software de visualización de datos “Ocean Data View” (ODV) describe la exploración, análisis y visualización de datos oceanográficos según el formato de la colección mundial de base de datos del océano “World Ocean Database” (WOD). El manual comprende 6 ejercicios prácticos donde se describe paso a paso la creación de las metavariables, la importación de los datos y su visualización mediante mapas de latitud, longitud y gráficos de dispersión, secciones verticales y series de tiempo. Se sugiere el uso extensivo del ODV para la visualización de datos oceanográficos por el personal científico del IMARPE.

Automated Recording of Bridge Inspection Data in the Pontis Format Final Report, HR-364 April 1995

A large percentage of bridges in the state of Iowa are classified as structurally or fiinctionally deficient. These bridges annually compete for a share of Iowa's limited transportation budget. To avoid an increase in the number of deficient bridges, the state of Iowa decided to implement a comprehensive Bridge Management System (BMS) and selected the Pontis BMS software as a bridge management tool. This program will be used to provide a selection of maintenance, repair, and replacement strategies for the bridge networks to achieve an efficient and possibly optimal allocation of resources. The Pontis BMS software uses a new rating system to evaluate extensive and detailed inspection data gathered for all bridge elements. To manually collect these data would be a highly time-consuming job. The objective of this work was to develop an automated-computerized methodology for an integrated data base that includes the rating conditions as defined in the Pontis program. Several of the available techniques that can be used to capture inspection data were reviewed, and the most suitable method was selected. To accomplish the objectives of this work, two userfriendly programs were developed. One program is used in the field to collect inspection data following a step-by-step procedure without the need to refer to the Pontis user's manuals. The other program is used in the office to read the inspection data and prepare input files for the Pontis BMS software. These two programs require users to have very limited knowledge of computers. On-line help screens as well as options for preparing, viewing, and printing inspection reports are also available. The developed data collection software will improve and expedite the process of conducting bridge inspections and preparing the required input files for the Pontis program. In addition, it will eliminate the need for large storage areas and will simplify retrieval of inspection data. Furthermore, the approach developed herein will facilitate transferring these captured data electronically between offices within the Iowa DOT and across the state.

La ??tica en el Aprendizaje-Servicio (ApS) : un Meta-An??lisis a partir de Education Resources Information Center (ERIC)

Resumen basado en el de la publicaci??n

Discrepancies in solar irradiation data for Stockholm and Athens

The aim of this study is to evaluate the variation of solar radiation data between different data sources that will be free and available at the Solar Energy Research Center (SERC). The comparison between data sources will be carried out for two locations: Stockholm, Sweden and Athens, Greece. For the desired locations, data is gathered for different tilt angles: 0°, 30°, 45°, 60° facing south. The full dataset is available in two excel files: “Stockholm annual irradiation” and “Athens annual irradiation”. The World Radiation Data Center (WRDC) is defined as a reference for the comparison with other dtaasets, because it has the highest time span recorded for Stockholm (1964–2010) and Athens (1964–1986), in form of average monthly irradiation, expressed in kWh/m2. The indicator defined for the data comparison is the estimated standard deviation. The mean biased error (MBE) and the root mean square error (RMSE) were also used as statistical indicators for the horizontal solar irradiation data. The variation in solar irradiation data is categorized in two categories: natural or inter-annual variability, due to different data sources and lastly due to different calculation models. The inter-annual variation for Stockholm is 140.4kWh/m2 or 14.4% and 124.3kWh/m2 or 8.0% for Athens. The estimated deviation for horizontal solar irradiation is 3.7% for Stockholm and 4.4% Athens. This estimated deviation is respectively equal to 4.5% and 3.6% for Stockholm and Athens at 30° tilt, 5.2% and 4.5% at 45° tilt, 5.9% and 7.0% at 60°. NASA’s SSE, SAM and RETScreen (respectively Satel-light) exhibited the highest deviation from WRDC’s data for Stockholm (respectively Athens). The essential source for variation is notably the difference in horizontal solar irradiation. The variation increases by 1-2% per degree of tilt, using different calculation models, as used in PVSYST and Meteonorm. The location and altitude of the data source did not directly influence the variation with the WRDC data. Further examination is suggested in order to improve the methodology of selecting the location; Examining the functional dependence of ground reflected radiation with ambient temperature; variation of ambient temperature and its impact on different solar energy systems; Im pact of variation in solar irradiation and ambient temperature on system output.

A software to process daily solar radiation data

This work presents one software developed to process solar radiation data. This software can be used in meteorological and climatic stations, and also as a support for solar radiation measurements in researches of solar energy availability allowing data quality control, statistical calculations and validation of models, as well as ease interchanging of data. (C) 1999 Elsevier B.V. Ltd. All rights reserved.

International Collection of JGOFS (Joint Global Ocean Flux Study), Volume 2: Integrated Data Sets (1989-2003)

The JGOFS International Collection Volume 2: Integrated Data Sets CD is a coherent, organised compilation of existing data sets produced by member countries which participated in JGOFS. In most cases, the data were gathered from the JGOFS International Collection, Volume 1: Discrete Datasets DVD. To produce Vol. 1 data were taken from the original sources and copied "as is" on the DVD. For Vol. 2 data and metadata have been harmonized using the conversion software PanTool and the import routine of PANGAEA checking for completeness of metadata and defining the relations between data and metadata. Prior to the import, data had performed a technical quality control, i.e. format and readability of the file, availability and combination of parameters and units, range of values.