Facial type measurements influence on transverse dimensions of normal occlusion arches

Objective – To correlate facial type measurements of Caucasian individuals with transverse dimensions of normal occlusion arches. Methods – Twenty-one pairs of dental models were selected according to the following inclusion criteria: presence of all permanent teeth from 1 st molar to 1 st molar; normal occlusion; no prosthetic crowns; no previous orthodontic treatment and 2 mm or less of crow- dings or spacings. The cephalometric measurements of lateral cephalometric X-ray of the same individuals were taken and tabulat ed. To evaluate the repetition of arch measurements, paired Student’s t-test and Pearson's correlation coefficient were used. The r elationship between the measurements was analysed by using the Pearson’s correlation. Results – The repetition of the measurements showed high correlation and no systematic error. In the comparison between the measurements, a moderate negative correlation was observed b et- ween facial axis angle and the measurements Upper and Lower 6-6, whereas a positive correlation was observed between dentition height and the latter. Conclusion – It was observed a negative correlation between facial axis angle and upper and lower inter-molar distance as well as a positive correlation between dentition height and upper and lower inter-molar distance.

Aparelho extrabucal como recurso auxiliar para alinhamento e nivelamento no tratamento orto cirúrgico de má oclusão classe III esquelética

When well indicated, the orthodontic surgical approach is the ideal treatment mean for Skeletal Class III adult patients. To improve facial esthetic results from orthognatic surgery, the leveling and alignment of maxillary dental arch must be achieved with minimal inclination and projection or even retro-inclination of anterior upper teeth. During a pre-surgical phase of 12 months, headgear bilateral force of 150 g/F was applied to the upper molars of a 22 years old male compliant patient with Class III skeletal malocclusion, to provide an upper teeth control of mesial tipping and projection during alignment and leveling. The ideal occlusal parameters required for surgical procedure were achieved without dental extractions permitting a total treatment period of 37 months. The outcomes remained stable over 3 years follow up after the removal of the appliance. The results indicate that, although headgear use depends greatly on patient compliance, when well indicated it is an interesting alternativetopromote dentaldecompensationon pre-surgical period, in order to allow surgical correction of skeletal Class III malocclusion.

Alterações dimensionais em pacientes submetidos à expansão rápida da maxila com aparelho do tipo Haas

The maxillary atresia is a alteration in the transverse dimension that can result in a unilateral or bilateral crossbite. For correction of atresia of the upper dental arch appliances with the intent to expand the arch of orthopedic or orthodontic manner are used, obtaining across-compatibility between the dental arches. The purpose of this study was to evaluate the dimensional changes of the maxillary in patients in the mixed dentition with atresia in the upper dental arch, using occlusal radiographs taken before, after rapid maxillary expansion and after removal of the appliance. Methods: the sample consisted of 35 patients who used the appliance type conventional Haas, in the mixed dentition, according to the standard protocol for installation, activation, containment and removal of the appliances rapid maxillary expansion. Results: the results confirm that the suture opening occurs in greater quantities in the anterior (4.3 mm) than posterior to (3.74 mm), representing a triangular opening of 7 degrees on average with the posterior opening 87% of the quantity of anterior opening. The molars region expanded about 5 mm, and the base bone 3.7 mm, representing a 74% bone expansion of the expansion teeth.

Confecção e montagem do set-up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Montagem e confecção do set up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Conhecimento de mães sobre os procedimentos de emergência nos casos de avulsão dentária

Introduction: Despite tooth avulsion following trauma being relatively common in children, the available studies show that adults have limited knowledge about it. Aim: The purpose of this study was to assess, by a questionnaire, the mothers’ general knowledge about the immediate management of tooth avulsion. Material and method: This descriptive study was carried out on a convenient sample of mothers (n= 65) who participated of the “Pastoral da Criança”, from Araraquara, SP, Brazil. The questionnaire comprised 15 questions about personal data and knowledge on tooth avulsion management. Results: Participants were, on average, 35 years old. A total of 30.8% of the mothers reported that their children suffered dental trauma. The majority had never received advice on this subject (76.9%); and did not know how teeth are kept in the dental arch (69.2%). Almost a half of the sample believed that an avulsed tooth can be replanted (49.2%). In relation to the management of tooth avulsion, 40% of them would clean the avulsed tooth with water, even if it was not dirty (38.5%). Most of them (69.2%) would take the tooth by hand for cleaning purposes, regardless the tooth region; and believed that brushing the tooth was important to take the dirty out (67.7%). Conclusion: The general knowledge of mothers about the immediate management of tooth avulsion was considered inadequate endangering the successful treatment of tooth avulsion.

Estudo in vivo e in vitro da incidência de bifurcação do canal radicular de incisivos inferiores pelo método radiográfico digital direto

Pós-graduação em Biopatologia Bucal - ICT

Quarto molar retido: a importância do diagnóstico precoce

Introductions: A supernumerary tooth is one that is additional to the normal series and can be found in almost any region of the dental arch. Its etiology is not fully understood. With regard to its prevalence, it occurs more commonly in permanent dentition and twice as often in men than in women. Supernumerary teeth are classified according to their morphology and location. Their presence can cause problems such as failure of eruption, displacement of teeth, crowding and odontogenic cysts and tumors. The diagnosis is usually by routine radiographs, for the majority of such teeth are impacted and asymptomatic. Objective and Case report: The purpose of this study was to make a brief review of the relevant literature and report one clinical case of the female patient, 23 years, melanoderma, featuring three quarters molars. Final considerations: The early diagnosis proved to be important for the resolution of the case in order to minimize or even prevent the development of complications and thus establish a proper plan of treatment.

Influence of adenotonsillectomy on hard palate dimensions

Objective: To evaluate hard palate width and height in mouth-breathing children pre- and post-adenotonsillectomy. Methods: We evaluated 44 children in the 3-6 year age bracket, using dental study casts in order to determine palatal height, intercanine width, and intermolar width. The children were divided into two groups: nasal breathing (n = 15) and mouth breathing (n = 29). The children in the latter group underwent adenotonsillectomy. The study casts were obtained prior to adenotonsillectomy, designated time point 1(11), at 13 months after adenotonsillectomy (T2), and at 28 months after adenotonsillectomy (13). Similar periods of observation were obtained for nasal breathing children. Results: At T1, there was a significantly lower intercanine width in mouth breathing children; intermolar width and palate height were similar between groups. After surgery, there was a significant increase in all the analyzed parameters in both groups, probably due to facial growth. Instead, the increase in intercanine width was substantially more prominent in mouth breathing children than in nasal breathing children, and the former difference failed in significance after the procedure. Conclusions: There were no significant differences between the nasal-breathing and mouth-breathing children in terms of intermolar width and palatal height prior to or after tonsillectomy. Although intercanine width was initially narrower in the mouth-breathing children, it showed normalization after the surgical procedure. These results confirm that the restoration of nasal breathing is central to proper occlusal development. (C) 2012 Elsevier Ireland Ltd. All rights reserved.

Clinical evaluation of the failure rates of metallic brackets

OBJECTIVES: The aim of this study was to evaluate in vivo the bonding of metallic orthodontic brackets with different adhesive systems. MATERIAL AND METHODS: Twenty patients (10.5-15.1 years old) who had sought corrective orthodontic treatment at a University Orthodontic Clinic were evaluated. Brackets were bonded from the right second premolar to the left second premolar in the upper and lower arches using: Orthodontic Concise, conventional Transbond XT, Transbond XT without primer, and Transbond XT associated with Transbond Plus Self-etching Primer (TPSEP). The 4 adhesive systems were used in all patients using a split-mouth design; each adhesive system was used in one quadrant of each dental arch, so that each group of 5 patients received the same bonding sequence. Initial archwires were inserted 1 week after bracket bonding. The number of bracket failures for each adhesive system was quantified over a 6-month period. RESULTS: The number of debonded brackets was: 8- Orthodontic Concise, 2- conventional Transbond XT, 9- Transbond XT without primer, and 1- Transbond XT + TPSEP. By using the Kaplan-Meier methods, statistically significant differences were found between the materials (p=0.0198), and the Logrank test identified these differences. Conventional Transbond XT and Transbond XT + TPSEP adhesive systems were statistically superior to Orthodontic Concise and Transbond XT without primer (p<0.05). There was no statistically significant difference between the dental arches (upper and lower), between the dental arch sides (right and left), and among the quadrants. CONCLUSIONS: The largest number of bracket failures occurred with Orthodontic Concise and Transbond XT without primer systems and few bracket failures occurred with conventional Transbond XT and Transbond XT+TPSEP. More bracket failures were observed in the posterior region compared with the anterior region.

Comparison of two scoring systems for evaluation of treatment outcome in patients with complete bilateral cleft lip and palate

Objective : To compare two scoring systems: the Huddart/Bodenham system (HB system) and the Bauru-BCLP yardstick (BCLP yardstick), which classify treatment outcome in terms of dental arch relationships in patients with complete bilateral cleft lip and palate (CBCLP). The predictive value of these scoring systems for treatment outcome was also evaluated. Design : Retrospective longitudinal study. Patients : Dental arch relationships of 43 CBCLP patients were evaluated at 6, 9, and 12 years. Setting : Treatment outcome in BCLP patients using two scoring systems. Main Outcome Measures : For each age group, the HB scores were correlated with the BCLP yardstick scores using Spearman's correlation coefficient. The predictive value of the two scoring systems was evaluated by backward regression analysis. Results : Intraobserver Kappa values for the BCLP yardstick scoring for the two observers were .506 and .627, respectively, and the interobserver reliability ranged from .427 and .581. The intraobserver reliability for the HB system ranged from .92 to .97 and the interobserver reliability from .88 to .96. The BCLP yardstick scores of 6 and 9 years together were predictors for the outcome at 12 years (explained variance 41.3%). Adding the incisor and lateral HB scores in the regression model increased the explained variance to 67%. Conclusions : The BCLP yardstick and the HB system are reliable scoring systems for evaluation of dental arch relationships of CBCLP patients. The HB system categorizes treatment outcome into similar categories as the BCLP yardstick. In case a more sensitive measure of treatment outcome is needed, selectively both scoring systems should be used.

Preventive effect of ozone on the development of white spot lesions during multibracket appliance therapy

OBJECTIVE: To test the null hypotheses: (1) there is no difference in the caries protective effect of ozone and Cervitec/Fluor Protector during multibracket (MB) appliance therapy, and (2) DIAGNOdent and quantitative light-induced fluorescence (QLF) are not superior to a visual evaluation of initial caries lesions. MATERIALS AND METHODS: Twenty right-handed patients with a very poor oral hygiene who required full MB appliance therapy were analyzed during 26 months. In a split-mouth-design, the four quadrants of each patient were either treated with ozone, a combination of Cervitec and Fluor Protector, or served as untreated controls. The visible plaque index (VPI) and white spot formation were analyzed clinically. DIAGNOdent and QLF were used for a quantitative assessment of white spot formation. RESULTS: The average VPI in all four dental arch quadrants amounted to 55.6% and was independent of the preventive measure undertaken. In the quadrants treated with Cervitec/Fluor Protector, only 0.7% of the areas developed new, clinically visible white spots. This was significantly (P < .05) less than in the quadrants treated with ozone (3.2%). The lesions detected with QLF only partially corresponded to the clinically detected white spots, while DIAGNOdent proved to be unable to detect any changes at all. CONCLUSIONS: The caries protective effect of Cervitec/Fluor Protector during MB therapy was superior to ozone, and a visual evaluation of initial caries lesions was superior to both DIAGNOdent and QLF.

DETERMINAÇÃO DAS FORMAS DO ARCO DENTÁRIO INFERIOR NA OCLUSÃO NORMAL NATURAL

Com a finalidade de determinar as formas do arco dentário inferior de maior incidência na oclusão normal natural, utilizou-se um método matemático associado ao emprego de uma função polinomial, o qual foi aplicado a 63 modelos de arcadas inferiores selecionados a partir de 6118 adolescentes. Todos os indivíduos eram portadores de dentição permanente, incluindo os segundos molares, e oclusão normal natural. Em cada dente foi fixada uma esfera de vidro, que teve a função de simular o acessório do aparelho ortodôntico, sendo utilizada na medição das distâncias entre o centro da imagem dessas esferas aos eixos x e y. Após a digitalização dos modelos de gesso, as imagens foram plotadas em um programa de computador, a fim de se obterem a função polinomial de sexto grau e o gráfico dessa função para os 126 segmentos de curva, originados das secções das imagens em lado direito e esquerdo. A seguir organizaram-se esses segmentos, de acordo com as características da curvatura anterior dos arcos dentários, em oito grupos diferentes de formas, que receberam as denominações de Forma A, Forma B, Forma C, Forma D, Forma E, Forma F, Forma G, Forma H. Cada grupo foi, então, dividido em três subgrupos, conforme os tamanhos pequeno, médio e grande. Os resultados indicaram 23 formas representativas do arco dentário inferior e uma forma média para a oclusão normal natural.

DETERMINAÇÃO DAS FORMAS DO ARCO DENTÁRIO INFERIOR NA OCLUSÃO NORMAL NATURAL

Com a finalidade de determinar as formas do arco dentário inferior de maior incidência na oclusão normal natural, utilizou-se um método matemático associado ao emprego de uma função polinomial, o qual foi aplicado a 63 modelos de arcadas inferiores selecionados a partir de 6118 adolescentes. Todos os indivíduos eram portadores de dentição permanente, incluindo os segundos molares, e oclusão normal natural. Em cada dente foi fixada uma esfera de vidro, que teve a função de simular o acessório do aparelho ortodôntico, sendo utilizada na medição das distâncias entre o centro da imagem dessas esferas aos eixos x e y. Após a digitalização dos modelos de gesso, as imagens foram plotadas em um programa de computador, a fim de se obterem a função polinomial de sexto grau e o gráfico dessa função para os 126 segmentos de curva, originados das secções das imagens em lado direito e esquerdo. A seguir organizaram-se esses segmentos, de acordo com as características da curvatura anterior dos arcos dentários, em oito grupos diferentes de formas, que receberam as denominações de Forma A, Forma B, Forma C, Forma D, Forma E, Forma F, Forma G, Forma H. Cada grupo foi, então, dividido em três subgrupos, conforme os tamanhos pequeno, médio e grande. Os resultados indicaram 23 formas representativas do arco dentário inferior e uma forma média para a oclusão normal natural.

ESTUDO DAS FORMAS E DIMENSÕES LINGUAIS DAS ARCADAS DENTÁRIAS EM INDIVÍDUOS BRASILEIROS COM OCLUSÃO NORMAL

A preocupação com o estudo das formas e dimensões das arcadas dentárias sempre esteve presente na ciência ortodôntica. Para a Ortodontia Lingual, que surgiu no final da década de 70, o primeiro artigo publicado foi o Fujita, onde relatou sobre a forma do arco a ser utilizado nesta técnica, a forma de cogumelo. Apesar de estar sendo divulgada de uma maneira mais intensa nestes últimos anos como uma solução estética definitiva e eficaz, o enfoque dos estudos sobre esta técnica tem sido a fabricação de novos materiais, técnicas de montagem do aparelho lingual e soluções clínicas, com poucas menções sobre a morfologia das arcadas dentárias. O presente trabalho tem a finalidade de estudar as formas e dimensões linguais das arcadas dentárias de indivíduos leucodermas com oclusão normal. Foram utilizados 47 pares de modelos de gesso de oclusão normal digitalizados pela face olcusal, previamente desgastadas até o terço médio da coroa para proporcionar melhor visualização. Por meio do programa CorelDraw 12 foram determinados pontos de referências e criados alguns pontos virtuais necessários para a realização das medidas. Os resultados determinaram três formas das arcadas dentárias linguais: cogumelo, árvore de Natal e mista. A maior prevalência foi a forma árvore de Natal, mas quando analisadas separadamente as arcadas dentárias linguais, encontrados no superior, maior prevalência da forma de cogumelo e no inferior da forma árvore de Natal. Conseqüentemente, esta foi a combinação mais prevalente entre as arcadas dentárias linguais superiores e inferiores. Propusemos diagramas para conformação de arcos ortodônticos linguais com base nos valores obtidos da amostra, determinando-se o quartil 1, mediana e quartil 3, como definidores dos tamanhos pequeno, médio e grande.