Integrated modelling of climate change impacts on water resources and quality in a lowland catchment: River Kennet, UK

An integrated approach to climate change impact assessment is explored by linking established models of regional climate (SDSM), water resources (CATCHMOD) and water quality (INCA) within a single framework. A case study of the River Kennet illustrates how the system can be used to investigate aspects of climate change uncertainty, deployable water resources, and water quality dynamics in upper and lower reaches of the drainage network. The results confirm the large uncertainty in climate change scenarios and freshwater impacts due to the choice of general circulation model (GCM). This uncertainty is shown to be greatest during summer months as evidenced by large variations between GCM-derived projections of future tow river flows, deployable yield from groundwater, severity of nutrient flushing episodes, and Long-term trends in surface water quality. Other impacts arising from agricultural land-use reform or delivery of EU Water Framework Directive objectives under climate change could be evaluated using the same framework. (c) 2006 Elsevier B.V. All rights reserved.

Preferences for the organization of long-term follow-up in adolescent and young adult cancer survivors.

PURPOSE As survival rates of adolescent and young adult (AYA) cancer patients increase, a growing number of AYA cancer survivors need follow-up care. However, there is little research on their preferences for follow-up care. We aimed to (1) describe AYA cancer survivors' preferences for the organization and content of follow-up care, (2) describe their preferences for different models of follow-up, and (3) investigate clinical and sociodemographic characteristics associated with preferences for the different models. METHODS AYA cancer survivors (diagnosed with cancer at age 16-25 years; ≥5 years after diagnosis) were identified through the Cancer Registry Zurich and Zug. Survivors completed a questionnaire on follow-up attendance, preferences for organizational aspects of follow-up care (what is important during follow-up, what should be included during appointments, what specialists should be involved, location), models of follow-up (telephone/questionnaire, general practitioner (GP), pediatric oncologist, medical oncologist, multidisciplinary team), and sociodemographic characteristics. Information on tumor and treatment was available through the Cancer Registry Zurich and Zug. RESULTS Of 389 contacted survivors, 160 (41.1 %) participated and 92 (57.5 %) reported still attending follow-up. Medical aspects of follow-up care were more important than general aspects (p < 0.001). Among different organizational models, follow-up by a medical oncologist was rated higher than all other models (p = 0.002). Non-attenders of follow-up rated GP-led follow-up significantly higher than attenders (p = 0.001). CONCLUSION Swiss AYA cancer survivors valued medical content of follow-up and showed a preference for medical oncologist-led follow-up. Implementation of different models of follow-up care might improve accessibility and attendance among AYA cancer survivors.

Effect of yttrium-rich misch metal on the microstructures, mechanical properties and corrosion behavior of die cast AZ91 alloy

Die cast AZ91-xYmm (x = 0-0.8 wt.%) magnesium alloys with excellent tensile properties and corrosion resistance behavior were successfully prepared by a simple addition of yttrium-rich misch metal (Ymm) to AZ91. Influences of Ymm on the microstructure, mechanical properties and corrosion behavior of AZ91 were investigated. The results showed that addition of Ymm to die cast AZ91 alloy could re. ne the microstructure including primary alpha-Mg and eutectic beta-Mg17Al12. When the content of Ymm reached 0.8 wt.% a small quantity of Al2Y phase would form. The tensile properties were improved greatly with addition of Ymm to AZ91. The creep rate of the AZ91-Ymm alloys, tested at 150 degrees C/50MPa, was one order of magnitude lower than that of AZ91. When addition of Ymm was more than 0.3 wt.%, the salt-spray corrosion resistance of AZ91-Ymm alloys could be 30-40 times of that of AZ91. The improvement of corrosion resistance with addition of Ymm was confirmed by the results of electrochemical polarization experiments. Mechanism of the improvement of mechanical properties and corrosion behavior caused by Ymm was also discussed.

Factores perinatales para riesgo de sobrepeso y obesidad en niños de 4 a 5 años en Colombia 2010.

Introducción: La OMS revela que en 2010 alrededor de 43 millones de niños menores de 5 años presentan sobrepeso. En Colombia según la Encuesta Nacional de Situación Nutricional en Colombia en su versión 2005, mostraba una prevalencia general de sobrepeso de 3.1% niños de 0 a 4 años. Es una condición de salud de origen multifactorial en la que interviene factores genéticos, ambientales, maternos y perinatales. Objetivo: Establecer la asociación de riesgo entre el bajo peso al nacer y el desarrollo de sobrepeso y obesidad en niños de 4 a 5 años. Metodología: Se realizó un estudio observacional descriptivo retrospectivo de corte transversal con los datos nutricionales, maternos y perinatales de la Encuesta Nacional de Demografía en Salud del año 2010 en Colombia. Se analizó la asociación entre la variable independiente bajo peso al nacer con el desenlace sobrepeso y obesidad en menores de 4 a 5 años, usando como medida el IMC según la edad. Se realizaron análisis univariados, bivariados y de regresión logística con un modelo de riesgo según las variables que inciden en el desenlace y la variable independiente. Resultados: La muestra obtenida para el estudio fue de 2166 niños de 4 a 5 años de edad quienes cumplían los criterios de inclusión. La prevalencia de sobrepeso u obesidad en la primera infancia fue de 21.8% (472) y el bajo peso al nacer. Los resultados sugieren la asociación de bajo peso y sobrepeso u obesidad es de ORajustado= 0.560 (0.356 – 0.881). Conclusiones: Los resultados sugieren que existe una asociación como factor protector entre el bajo peso y el sobrepeso u obesidad en la primera infancia. Sin embargo, debido al comportamiento de las variables consideradas en la muestra no hay suficiente información para rechazar completamente la hipótesis nula.

Strength and deformation behavior of ODP Leg 110 sediments

The shape and morphology of the northern Barbados Ridge complex is largely controlled by the sediment yield and failure behavior in response to high lateral loads imposed by convergence. Loads in excess of sediment yield strength result in nonrecoverable deformations within the wedge, and failure strength acts as an upper limit beyond which stresses are released through thrust faults. Relatively high loading rates lead to delayed consolidation and in-situ pore pressures greater than hydrostatic. The sediment yield and failure behavior is described for any stress path by a generalized constitutive model. A yield locus delineates the onset of plastic (non-recoverable) deformation, as defined from the isotropic and anisotropic consolidation responses of high-quality 38-mm triaxial specimens; a failure envelope was obtained by shearing the same specimens in both triaxial compression and extension. The yield locus is shown to be rotated into extension space and is centered about a K-line greater than unity, suggesting that the in-situ major principal stress has rotated into the horizontal plane, and that the sediment wedge is being subjected to extensional effective stress paths.

Object-centric process models and the design of flexible processes

Mainstream business process modelling techniques promote a design paradigm wherein the activities to be performed within a case, together with their usual execution order, form the backbone of a process model, on top of which other aspects are anchored. This paradigm, while eective in standardised and production-oriented domains, shows some limitations when confronted with processes where case-by-case variations and exceptions are the norm. In this thesis we develop the idea that the eective design of exible process models calls for an alternative modelling paradigm, one in which process models are modularised along key business objects, rather than along activity decompositions. The research follows a design science method, starting from the formulation of a research problem expressed in terms of requirements, and culminating in a set of artifacts that have been devised to satisfy these requirements. The main contributions of the thesis are: (i) a meta-model for object-centric process modelling incorporating constructs for capturing exible processes; (ii) a transformation from this meta-model to an existing activity-centric process modelling language, namely YAWL, showing the relation between object-centric and activity-centric process modelling approaches; and (iii) a Coloured Petri Net that captures the semantics of the proposed meta-model. The meta-model has been evaluated using a framework consisting of a set of work ow patterns. Moreover, the meta-model has been embodied in a modelling tool that has been used to capture two industrial scenarios.

Virtual worlds as a model-view approach to the communication of business processes models

The improvement and optimization of business processes is one of the top priorities in an organization. Although process analysis methods are mature today, business analysts and stakeholders are still hampered by communication issues. That is, analysts cannot effectively obtain accurate business requirements from stakeholders, and stakeholders are often confused about analytic results offered by analysts. We argue that using a virtual world to model a business process can benefit communication activities. We believe that virtual worlds can be used as an efficient model-view approach, increasing the cognition of business requirements and analytic results, as well as the possibility of business plan validation. A healthcare case study is provided as an approach instance, illustrating how intuitive such an approach can be. As an exploration paper, we believe that this promising research can encourage people to investigate more research topics in the interdisciplinary area of information system, visualization and multi-user virtual worlds.

Procuring OSM : base-line models of off-site manufacture business processes in Australia

A pressing cost issue facing construction is the procurement of off-site pre-manufactured assemblies. In order to encourage Australian adoption of off-site manufacture (OSM), a new approach to underlying processes is required. The advent of object oriented digital models for construction design assumes intelligent use of data. However, the construction production system relies on traditional methods and data sources and is expected to benefit from the application of well-established business process management techniques. The integration of the old and new data sources allows for the development of business process models which, by capturing typical construction processes involving OSM, provides insights into such processes. This integrative approach is the foundation of research into the use of OSM to increase construction productivity in Australia. The purpose of this study is to develop business process models capturing the procurement, resources and information flow of construction projects. For each stage of the construction value chain, a number of sub-processes are identified. Business Process Modelling Notation (BPMN), a mainstream business process modelling standard, is used to create base-line generic construction process models. These models identify OSM decision-making points that could provide cost reductions in procurement workflow and management systems. This paper reports on phase one of an on-going research aiming to develop a proto-type workflow application that can provide semi-automated support to construction processes involving OSM and assist in decision-making in the adoption of OSM thus contributing to a sustainable built environment.

The causes and consequences of Rent-seeking in Northern Ireland, 1945-72

Northern Ireland's economic performance during the 'golden age' was weak. Crafts suggested that rent-seeking was an important determinant of this poor record. This article offers support for such a conclusion. It is suggested that the growth record was shaped by British regulations preventing conflicts of ministerial interest not being made operational until 1963. This institutional divergence tended to promote rent-seeking behaviour, which impeded the pursuit of an industrial policy that could promote economic efficiency. In 1963 the institutional structure and the industrial policy framework changed. These changes stimulated the pursuit of efficiency and contributed to an improved regional economic performance.

Queueing Theory And Other Applications Of Stochastic Processes Queueing And Inventory Models With Rest Periods

In this thesis we study the effect of rest periods in queueing systems without exhaustive service and inventory systems with rest to the server. Most of the works in the vacation models deal with exhaustive service. Recently some results have appeared for the systems without exhaustive service.

An assessment of the impact of local processes on dust lifting in martian climate models

Simulation of the lifting of dust from the planetary surface is of substantially greater importance on Mars than on Earth, due to the fundamental role that atmospheric dust plays in the former’s climate, yet the dust emission parameterisations used to date in martian global climate models (MGCMs) lag, understandably, behind their terrestrial counterparts in terms of sophistication. Recent developments in estimating surface roughness length over all martian terrains and in modelling atmospheric circulations at regional to local scales (less than O(100 km)) presents an opportunity to formulate an improved wind stress lifting parameterisation. We have upgraded the conventional scheme by including the spatially varying roughness length in the lifting parameterisation in a fully consistent manner (thereby correcting a possible underestimation of the true threshold level for wind stress lifting), and used a modification to account for deviations from neutral stability in the surface layer. Following these improvements, it is found that wind speeds at typical MGCM resolution never reach the lifting threshold at most gridpoints: winds fall particularly short in the southern midlatitudes, where mean roughness is large. Sub-grid scale variability, manifested in both the near-surface wind field and the surface roughness, is then considered, and is found to be a crucial means of bridging the gap between model winds and thresholds. Both forms of small-scale variability contribute to the formation of dust emission ‘hotspots’: areas within the model gridbox with particularly favourable conditions for lifting, namely a smooth surface combined with strong near-surface gusts. Such small-scale emission could in fact be particularly influential on Mars, due both to the intense positive radiative feedbacks that can drive storm growth and a strong hysteresis effect on saltation. By modelling this variability, dust lifting is predicted at the locations at which dust storms are frequently observed, including the flushing storm sources of Chryse and Utopia, and southern midlatitude areas from which larger storms tend to initiate, such as Hellas and Solis Planum. The seasonal cycle of emission, which includes a double-peaked structure in northern autumn and winter, also appears realistic. Significant increases to lifting rates are produced for any sensible choices of parameters controlling the sub-grid distributions used, but results are sensitive to the smallest scale of variability considered, which high-resolution modelling suggests should be O(1 km) or less. Use of such models in future will permit the use of a diagnosed (rather than prescribed) variable gustiness intensity, which should further enhance dust lifting in the southern hemisphere in particular.