993 resultados para Cycle length
Resumo:
We describe growth, longevity, sex ratio, reproductive period, and recruitment of Aegla paulensis from Jaragua Stale Park, Sao Paulo, Brazil (23 degrees 27'27.9 '' S; 46 degrees 45'32.3 '' W). The population was sampled monthly (September 2007 through August 2009) with the aid of traps. Over five thousand individuals were captured, sexed, measured (carapace length = CL) and inspected for reproductive traits (females only), and then released back to the sampling site. The pattern of the reproductive cycle was strongly seasonal (austral mid autumn through late winter), with a single recruitment pulse per year. The obtained von Bertalanffy growth equations were CL = 21.25[1-e(-0.041(t + 1.250))] and CL = 16.52[1-e(-0.049(t + 1.823))] for males and females, respectively. Males (mean CL +/- SD = 11.86 +/- 2.79 mm) attain larger sizes than females (mean CL +/- SD = 10.84 +/- 2.36 mm). Aegla paulensis reproduces twice during an estimated life span of 40.2 months for females and 33.9 months for males. Temporal variation of sex ratio showed a distinctive pattern characterized by a sequence of three distinct periods that repeated from one year to another, and which suggested that a behavioral component influence the proportion of sex in adult specimens sampled with traps during reproductive and non-reproductive periods.
Resumo:
The aim of this study was to directly compare the causes of fatigue after a short- and a long-rest interval between consecutive stretch-shortening cycle exercises. Eleven healthy males jumped with different resting period lengths (short = 6.1 +/- 1 s, long = 8.6 +/- 0.9 s), performing countermovement jumps at 95% of their maximal jump height until they were unable to sustain the target height. After short- and long-rest, the maximal voluntary isometric contraction knee extension torque decreased (-7%; p = 0.04), comparing to values obtained before exercise protocols. No change was seen from pre- to post-exercise, for either short- or long-rest, in biceps femoris coactivation (-1%; p = 0.95), peak-to-peak amplitude (1%; p = 0.95) and duration (-8%; p = 0.92) of the compound muscle action potential of the vastus lateralis. Evoked peak twitch torque reduced after both exercise protocols (short = -26%, long = -32%; p = 0.003) indicating peripheral fatigue. However, central fatigue occurred only after short-rest evidenced by a reduction in voluntary activation of the quadriceps muscle (-14%; p = 0.013) measured using the interpolated twitch technique. In conclusion, after Stretch-shortening cycle exercise using short rest period length, the cause of fatigue was central and peripheral, while after using long rest period length, the cause of fatigue was peripheral.
Resumo:
Eusociality is taxonomically rare, yet associated with great ecological success. Surprisingly, studies of environmental conditions favouring eusociality are often contradictory. Harsh conditions associated with increasing altitude and latitude seem to favour increased sociality in bumblebees and ants, but the reverse pattern is found in halictid bees and polistine wasps. Here, we compare the life histories and distributions of populations of 176 species of Hymenoptera from the Swiss Alps. We show that differences in altitudinal distributions and development times among social forms can explain these contrasting patterns: highly social taxa develop more quickly than intermediate social taxa, and are thus able to complete the reproductive cycle in shorter seasons at higher elevations. This dual impact of altitude and development time on sociality illustrates that ecological constraints can elicit dynamic shifts in behaviour, and helps explain the complex distribution of sociality across ecological gradients.
Resumo:
Postembryonic development of Misumenops pallida (Keyserling) (Araneae, Thomisidae), one of the most abundant predator species in soybean fields in Buenos Aires Province (Argentina) was studied. The life cycle was observed in the laboratory from egg sacs collected in the field, and from egg sacs spined in the laboratory by gravid females collected in the field. Results indicated that instar length and feeding rate increased throughout the life cycle being higher in females than in males. Greater mortality was observed to third and fourth instars decreasing thereafter. These results may contribute to deternmine the efficiency of this species as a natural enemy of insect pests of soybean.
Resumo:
Concentration gradients regulate many cell biological and developmental processes. In rod-shaped fission yeast cells, polar cortical gradients of the DYRK family kinase Pom1 couple cell length with mitotic commitment by inhibiting a mitotic inducer positioned at midcell. However, how Pom1 gradients are established is unknown. Here, we show that Tea4, which is normally deposited at cell tips by microtubules, is both necessary and, upon ectopic cortical localization, sufficient to recruit Pom1 to the cell cortex. Pom1 then moves laterally at the plasma membrane, which it binds through a basic region exhibiting direct lipid interaction. Pom1 autophosphorylates in this region to lower lipid affinity and promote membrane release. Tea4 triggers Pom1 plasma membrane association by promoting its dephosphorylation through the protein phosphatase 1 Dis2. We propose that local dephosphorylation induces Pom1 membrane association and nucleates a gradient shaped by the opposing actions of lateral diffusion and autophosphorylation-dependent membrane detachment.
Resumo:
How do cells sense their own size and shape? And how does this information regulate progression of the cell cycle? Our group, in parallel to that of Paul Nurse, have recently demonstrated that fission yeast cells use a novel geometry-sensing mechanism to couple cell length perception with entry into mitosis. These rod-shaped cells measure their own length by using a medially-placed sensor, Cdr2, that reads a protein gradient emanating from cell tips, Pom1, to control entry into mitosis. Budding yeast cells use a similar molecular sensor to delay entry into mitosis in response to defects in bud morphogenesis. Metazoan cells also modulate cell proliferation in response to their own shape by sensing tension. Here I discuss the recent results obtained for the fission yeast system and compare them to the strategies used by these other organisms to perceive their own morphology.
Resumo:
Background: Copeptin (CP), a derivate from the antidiuretic hormone (ADH) precursor pre-pro-vasopressin, stochiometrically mirrors ADH secretion. CP is increasingly evaluated as a diagnostic and prognostic biomarker in different diseases. It is therefore important to recognize possible confounding factors when interpreting CP levels. In healthy regularly menstruating women, there is a small but measurable physiological variability of hormones involved in fluid regulation. ADH plasma levels have been found to be lowest at menstruation, increasing during the follicular phase with a peak at ovulation and a drop in the luteal phase. We investigated the variability of CP during the menstrual cycle (MC) and its correlation to MC hormones. Methods: In total, 15 healthy women with regular MC (from 26 to 33 days) were included in this study. Ovulation was confirmed by progesterone (prog) levels on day 21 of the MC before entering the study and during the study. Blood collection was performed on days 3, 5, 8-16, 18, 21, 24 and 27 of their MC. Serums were assayed for prog, estradiol (E2), LH, and CP. Mixed linear regression analysis for repeated measures was performed to study the changes of CP, prog, E2 and LH during the MC, and to test the correlation of CP with sex hormones during the MC. Results: Mean MC length in all subjects was 28.5±2.2 d. E2, prog, and LH exhibited characteristic changes during the MC (all P< 0.05). All cycles were ovulatory (peak prog 54±15 nmol/l). CP levels did not change significantly throughout the MC, and were not associated with changes in prog, E2 or LH-levels (all P=ns). Conclusion: CP levels remain stable during the MC and are not influenced by changes in sex hormones. This implicates that it is not necessary to consider MC phases when using CP as a biomarker in premenopausal women.
Resumo:
Background: To determine whether misalignment structures such as duplications, repeats, and palindromes are associated to insertions/deletions (indels) in gp120, indicating that indels are indeed frameshift mutations generated by DNA misalignment mechanism. Methods: Cloning and sequencing of a fragment of HIV-1 gp120 spanning C2-C4 derived from plasma RNA in 12 patients with early chronic disease and naïve to antiretroviral therapy. Results: Indels in V4 involved always insertion and deletion of duplicated nucleotide segments, and AAT repeats, and were associated to the presence of palindromic sequences. No duplications were detected in V3 and C3. Palindromic sequences occurred with similar frequencies in V3, C3 and V4; the frequency of palindromes in individual genes was found to be significantly higher in structural (gp120, p ≤ 3.00E-7) and significantly lower in regulatory (Tat, p ≤ 9.00E-7) genes, as compared to the average frequency calculated over the full genome. Discussion: Indels in V4 are associated to misalignment structures (i.e. duplications repeat and palindromes) indicating DNA misalignment as the mechanism underlying length variation in V4. The finding that indels in V4 are caused by DNA misalignment has some very important implications: 1) indels in V4 are likely to occur in proviral DNA (and not in RNA), after integration of HIV into the host genome; 2) they are likely to occur as progressive modifications of the early founder virus during chronic infection, as more and more cells get infected; 3) frameshift mutations involving any number of base pairs are likely to occur evenly across gp120; however, only those mutants carrying a functional gp120 (indels as multiples of three base pairs) will be able to perpetuate the virus cycle and to keep spreading through the population.
Resumo:
Interest towards working capital management increased among practitioners and researchers because the financial crisis of 2008 caused the deterioration of the general financial situation. The importance of managing working capital effectively increased dramatically during the financial crisis. On one hand, companies highlighted the importance of working capital management as part of short-term financial management to overcome funding difficulties. On the other hand, in academia, it has been highlighted the need to analyze working capital management from a wider perspective namely from the value chain perspective. Previously, academic articles mostly discussed working capital management from a company-centered perspective. The objective of this thesis was to put working capital management in a wider and more academic perspective and present case studies of the value chains of industries as instrumental in theoretical contributions and practical contributions as complementary to theoretical contributions and conclusions. The principal assumption of this thesis is that selffinancing of value chains can be established through effective working capital management. Thus, the thesis introduces the financial value chain analysis method which is employed in the empirical studies. The effectiveness of working capital management of the value chains is studied through the cycle time of working capital. The financial value chain analysis method employed in this study is designed for considering value chain level phenomena. This method provides a holistic picture of the value chain through financial figures. It extends the value chain analysis to the industry level. Working capital management is studied by the cash conversion cycle that measures the length (days) of time a company has funds tied up in working capital, starting from the payment of purchases to the supplier and ending when remittance of sales is received from the customers. The working capital management practices employed in the automotive, pulp and paper and information and communication technology industries have been studied in this research project. Additionally, the Finnish pharmaceutical industry is studied to obtain a deeper understanding of the working capital management of the value chain. The results indicate that the cycle time of working capital is constant in the value chain context over time. The cash conversion cycle of automotive, pulp and paper, and ICT industries are on average 70, 60 and 40 days, respectively. The difference is mainly a consequence of the different cycle time of inventories. The financial crisis of 2008 affected the working capital management of the industries similarly. Both the cycle time of accounts receivable and accounts payable increased between 2008 and 2009. The results suggest that the companies of the automotive, pulp and paper and ICT value chains were not able to self-finance. Results do not indicate the improvement of value chains position in regard to working capital management either. The findings suggest that companies operating in the Finnish pharmaceutical industry are interested in developing their own working capital management, but collaboration with the value chain partners is not considered interesting. Competition no longer occurs between individual companies, but between value chains. Therefore the financial value chain analysis method introduced in this thesis has the potential to support value chains in improving their competitiveness.
Resumo:
The purpose of this study was to test the hypothesis that the potentiation of dynamic function was dependent upon both length change speed and direction. Mouse EDL was cycled in vitro (25º C) about optimal length (Lo) with constant peak strain (± 2.5% Lo) at 1.5, 3.3 and 6.9 Hz before and after a conditioning stimulus. A single pulse was applied during shortening or lengthening and peak dynamic (concentric or eccentric) forces were assessed at Lo. Stimulation increased peak concentric force at all frequencies (range: 19 ± 1 to 30 ± 2%) but this increase was proportional to shortening speed, as were the related changes to concentric work/power (range: -15 ± 1 to 39 ± 1 %). In contrast, stimulation did not increase eccentric force, work or power at any frequency. Thus, results reveal a unique hysteresis like effect for the potentiation of dynamic output wherein concentric and eccentric forces increase and decrease, respectively, with work cycle frequency.
Resumo:
The purpose of this study was to test the hypothesis that the potentiation of dynamic function was dependent upon both length change speed and direction. Mouse EDL was cycled in vitro (250 C) about optimal length (Lo) with constant peak strain (± 2.5% Lo) at 1.5,3.3 and 6.9 Hz before and after a conditioning stimulus. A single pulse was applied during shortening or lengthening and peak dynamic (concentric or eccentric) forces were assessed at Lo. Stimulation increased peak concentric force at all frequencies (range: 19±1 to 30 ± 2%) but this increase was proportional to shortening speed, as were the related changes to concentric work/power (range: -15 ± 1 to 39 ± 1 %). In contrast, stimulation did not increase eccentric force, work or power at any frequency. Thus, results reveal a unique hysteresis like effect for the potentiation of dynamic output wherein concentric and eccentric forces increase and decrease, respectively, with work cycle frequency.
Resumo:
Le programme -Une école adaptée à tous ses élèves-, qui s'inscrit dans la réforme actuelle de l'éducation au Québec, nous a amenée à nous intéresser aux représentations dans les grandeurs en mesure en mathématiques des élèves en difficulté d'apprentissage. Nous nous sommes proposés de reconduire plusieurs paramètres de la recherche de Brousseau (1987, 1992) auprès de cette clientèle. La théorie des champs conceptuels (TCC) de Vergnaud (1991), appliquée aux structures additives, a été particulièrement utile pour l'analyse et l'interprétation de leurs représentations. Comme méthode de recherche, nous avons utilisé la théorie des situations didactiques en mathématiques (TSDM), réseau de concepts et de méthode de recherche appuyé sur l'ingénierie didactique qui permet une meilleure compréhension de l'articulation des contenus à enseigner. Grâce à la TSDM, nous avons observé les approches didactiques des enseignants avec leurs élèves. Notre recherche est de type exploratoire et qualitatif et les données recueillies auprès de 26 élèves de deux classes spéciales du deuxième cycle du primaire ont été traitées selon une méthode d'analyse de contenu. Deux conduites ont été adoptées par les élèves. La première, de type procédural a été utilisée par presque tous les élèves. Elle consiste à utiliser des systèmes de comptage plus ou moins sophistiqués, de la planification aux suites d'actions. La deuxième consiste à récupérer directement en mémoire à long terme le résultat associé à un couple donné et au contrôle de son exécution. L'observation des conduites révèle que les erreurs sont dues à une rupture du sens. Ainsi, les difficultés d'ordre conceptuel et de symbolisation nous sont apparues plus importantes lorsque l'activité d'échange demandait la compétence "utilisation" et renvoyait à la compréhension de la tâche, soit les tâches dans lesquelles ils doivent eux-mêmes découvrir les rapports entre les variables à travailler et à simuler les actions décrites dans les énoncés. En conséquence, les problèmes d'échanges se sont révélés difficiles à modéliser en actes et significativement plus ardus que les autres. L'étude des interactions enseignants et élèves a démontré que la parole a été presque uniquement le fait des enseignants qui ont utilisé l'approche du contrôle des actes ou du sens ou les deux stratégies pour aider des élèves en difficulté. Selon le type de situation à résoudre dans ces activités de mesurage de longueur et de masse, des mobilisations plurielles ont été mises en oeuvre par les élèves, telles que la manipulation d'un ou des étalon(s) par superposition, par reports successifs, par pliage ou par coupure lorsque l'étalon dépassait; par retrait ou ajout d'un peu de sable afin de stabiliser les plateaux. Nous avons également observé que bien que certains élèves aient utilisé leurs doigts pour se donner une perception globale extériorisée des quantités, plusieurs ont employé des procédures très diverses au cours de ces mêmes séances. Les résultats présentés étayent l'hypothèse selon laquelle les concepts de grandeur et de mesure prennent du sens à travers des situations problèmes liées à des situations vécues par les élèves, comme les comparaisons directes. Eles renforcent et relient les grandeurs, leurs propriétés et les connaissances numériques.
Resumo:
The evaluation of life cycle greenhouse gas emissions from power generation with carbon capture and storage (CCS) is a critical factor in energy and policy analysis. The current paper examines life cycle emissions from three types of fossil-fuel-based power plants, namely supercritical pulverized coal (super-PC), natural gas combined cycle (NGCC) and integrated gasification combined cycle (IGCC), with and without CCS. Results show that, for a 90% CO2 capture efficiency, life cycle GHG emissions are reduced by 75-84% depending on what technology is used. With GHG emissions less than 170 g/kWh, IGCC technology is found to be favorable to NGCC with CCS. Sensitivity analysis reveals that, for coal power plants, varying the CO2 capture efficiency and the coal transport distance has a more pronounced effect on life cycle GHG emissions than changing the length of CO2 transport pipeline. Finally, it is concluded from the current study that while the global warming potential is reduced when MEA-based CO2 capture is employed, the increase in other air pollutants such as NOx and NH3 leads to higher eutrophication and acidification potentials.