A morphology-related study on photodegradation of protein fibres

The wool fibre has a complex morphology, consisting of an outer layer of cuticle scales surrounding an inner cortex. These two components are hard to separate effectively except by using harsh chemical treatments, making it difficult to determine the susceptibility of the different components of the fibre to photoyellowing. An approach to this problem based on mechanical fibre modification is described. To expose the inner cortex of wool to different degrees, clean wool fibres were converted into ‘powders’ of various fineness via mechanical chopping, air-jet milling, ball milling or their combination. Four types of powdered wool (samples A, B, C and D) were produced with reducing particle size distributions and an increasing level of surface damage as observed using SEM. Sample A contained essentially intact short fibre snippets and sample D contained a large amount of exposed cortical materials. Samples B and C contained a mixture of short fibre snippets and cortical materials. Solid wool discs were then compressed from the corresponding powder samples in a polished stainless steel die to enable colour measurement and UV irradiation studies. ATR-FTIR studies on powder discs demonstrated a small shift in the amide I band from 1644 cm−1 for disc A to 1654 cm−1 for disc D due to the different structures of the wool cuticle and cortex, in agreement with previous studies. Similarly an increase in the intensity ratio of the amide I to amide II band (1540 cm−1) was observed for disc D, which contains a higher fraction of cortical material at the surface of the disc.

Discs prepared from sample D appeared the lightest in colour before exposure and had the slowest photoyellowing rate, whereas discs made from powders A–C with a higher level of cuticle coverage were more yellow before exposure and experienced a faster rate of photoyellowing. This suggests that the yellow chromophores of wool may be more prevalent in cuticle scales, and that wool photoyellowing occurs to a greater extent in the cuticle than in the cortex. Photo-induced chemiluminescence measurements showed that sample D had a higher chemiluminescence intensity after exposure to UVA radiation and a faster decay rate than samples A and B. Thus one of the roles of the wool cuticle may be to protect the cortex by quenching of free radical oxidation during exposure to the UV wavelengths present in sunlight.

Frequency dependence of ultrasonic wool scouring

Conventional aqueous scouring of greasy wool promotes wool felting and can be energy and water intensive. Ultrasonic wool scouring could be an alternative technology to minimise the negative impact, provided that the cleaning efficiency and fibre quality are not compromised. This study  examined the influence of ultrasonic irradiation frequency and ultrasonic power variations on wool scouring performance at different liquor ratios. Scoured fibre, residual ash content, residual grease content, whiteness and yellowness were evaluated. The impact of liquor degassing on wool scouring effectiveness was studied. Fibre surface damage was also assessed in this work. It was observed that while there was no significant influence of ultrasonic frequency on the whiteness or yellowness of the scoured fibres, wool scoured at frequencies of 28 kHz and 80 kHz had more grease and dirt removed than that scoured at 45 kHz. Low ultrasonic power and degassed bath liquor increased wool grease removal ability. Ultrasonic treatment caused scale cracking/peeling in some wool fibres. More severe cuticle damage was observed in fibres scoured at the lower frequency. This damage resulted in increased dye uptake by the fibres.

Ultrasonic scouring of wool and its effects on fibre breakage during carding

Ultrasonics has shown the potential to reduce the cost and environmental impact of textile processing. This work investigates the impact of ultrasonic scouring on fibre entanglement caused during the scouring process. Levels of fibre entanglement were quantified by measuring fibre length using OFDA4000 after carding. A significant reduction in fibre entanglement after ultrasonic scouring was observed and this was due to a reduced fibre migration in the wash bath when compared with the mechanical agitation seen in conventional scouring process. Fibre cuticle scale damage resulting from the ultrasonic irradiation may also have contributed to the reduction in fibre entanglement. A reduced level of fibre entanglement from ultrasonic wool scouring leads to a reduction in fibre breakage during carding.

Fibre properties affecting the softness of wool and other keratins

The emerging market for next-to-skin knitwear requires wool to satisfy the consumer’s tactile requirements for softness. The role of the fibre’s surface and physical properties on fibre and fabric softness was examined. The fibre’s cuticle properties were found to have a greater influence on softness than the fibre’s mechanical properties.

What happens during natural protein fibre dissolution in ionic liquids

Here, we monitor the dissolution of several natural protein fibres such as wool, human hair and silk, in various ionic liquids (ILs). The dissolution of protein-based materials using ILs is an emerging area exploring the production of new materials from waste products. Wool is a keratin fibre, which is extensively used in the textiles industry and as a result has considerable amounts of waste produced each year. Wool, along with human hair, has a unique morphology whereby the outer layer, the cuticle, is heavily cross linked with disulphide bonds, whereas silk does not have this outer layer. Here we show how ILs dissolve natural protein fibres and how the mechanism of dissolution is directly related to the structure and morphology of the wool fibre. © 2014 by the authors; licensee MDPI, Basel, Switzerland.

Ultramorphology and histochemistry of fat body cells from last Instar larval of the Pachycondyla (=Neoponera) villosa (Fabricius) (Formicidae: Ponerinae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morfologia de frutos de goiabeira

A eficiência na absorção de nutrientes pelos frutos pode sofrer interferências em função da estrutura morfológica presente. Assim, frente à importância do conhecimento da morfologia dos frutos para um manejo mais adequado dos pomares em termos de adubação foliar, ou de tratamentos pós-colheita para ampliar a vida útil dos mesmos, desenvolveu-se o presente estudo, cujo objetivo foi descrever a morfologia do pericarpo dos frutos de goiabeira. Para isto, amostras do pericarpo de goiabas (cv. Paluma) foram observadas ao microscópio ótico e eletrônico de varredura. Algumas das características observadas, como a presença de cutícula espessa, cêra epicuticular, três camadas subepidérmicas de células compactas e grande quantidade de esclereídeos, bem como a presença esporádica e dispersa de estômatos, podem constituir-se em barreiras para a absorção e movimentação de nutrientes e substâncias aplicadas aos frutos de goiabeira.

An evergreen neotropical savanna tree (Gochnatia polymorpha, Asteraceae) produces different dry- and wet-season leaf types

Gochnatia polymorpha (Less.) Cabrera is a widespread tree species found in different physiognomies of neotropical savanna (cerrado) formations of south-eastern Brazil. The present study describes some leaf anatomical characteristics of this species as a function of the time of leaf flush, during dry or wet seasons. This species presents anatomical plasticity in the cuticle, palisade parenchyma and abaxial epidermis as well as in stomatal size and stomatal and trichome density, which are leaf structures linked with water-status control. Leaf structure changed to suit the particular environmental conditions during dry and wet seasons. The production of different wet-and dry-season leaf types in G. polymorpha could be a response to drought and an adaptation to environmental constraints in the cerrado.

Aerial stem and leaf morphoanatomy of some species of Smilax

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Usos potenciais de moringa oleifera lam., uma matriz para produção de biodiesel e tratamento de água no semiárido nordestino

The current environmental crisis demands transformations in the relations among society, nature and development, considering sustainability. In this context, an important theme is replacing fossil fuels with biofuels, such as biodiesel. Moringa oleifera Lam. is a species that can be used as a raw material to produce biodiesel. Besides, it is a multiple purposes plant, which can be used also in water treatment. Thus, the aims of this work were to analyze the anatomical adaptations found in the stem and in the leaf and the seed s oil stores of M. oleifera., to investigate chemical characteristics of M. oleifera s seed oil, considering biodiesel production, and to evaluate the coagulation activity of these seeds in water treatment. Semipermanent histological laminas were made and it follows that the stem has thick cuticle, stomata whose cells guard are below the epidermis line, hollow medulla, druses and tector trichomes as adaptations to climate and soil conditions in which the species is found and the leaf is dorsiventral and it has thick cuticle, tector trichomes and druses. The seed has great reserves of oil. These features favor the use of Moringa oleifera Lam. as a raw material to produce biodiesel in Brazil s Northeast semiarid region. Chemical analysis were made through oil solvent extraction using mechanic stirrer. The oil was analyzed in UV spectrophotometer. A transesterification was made and biodiesel was analyzed in gas chromatography. Oil yield was high and good quality biodiesel was obtained. To evaluate seeds coagulantion activity, coagulation and flocculation essays in jartest were made, using seed extract to treat raw water. Seeds were efficient in cogulation process to treat water. So, they can be used in rudimentary systems or as a raw material to coagulant proteins extraction, as an alternative to traditional coagulants. M. oleifera has characteristics that favor its use to biodiesel production and water treatment

Ontogenesis, structure and ultrastructure of Hymenaea stigonocarpa (Fabaceae : Caesalpinioideae) colleters

The genus Hymenaea is characterized by a great diversity of secretory structures, but there are no reports of colleters yet. The objectives of this study are to report the occurrence and describe the origin and structure of colleters in Hymenaea stigonocarpa Mart. ex Hayne. Shoot apex samples were collected, fixed, and processed for light microscopy, scanning electron microscopy, and transmission electron microscopy as per usual methods. Colleters occur predominantly on the stipule's adaxial side. These structures are found at the base on a narrow strip, corresponding to the median vein up to half the length of the stipule. When present on the abaxial side, they are concentrated at the base and restricted to the margins. Colleters develop from the protoderm; they are elongate and club-shaped. Their body has no stratification; their surface cells differ from the inner cells only in position and presence of cuticle. Colleter cells have thin walls, dense cytoplasm, large nuclei, many mitochondria, rough endoplasmic reticulum, and abundant dictyosomes. Histochemical tests with Ruthenium red showed pectic compounds in the cytosol. In H. stigonocarpa, colleter arrangement is compatible with the hypothesis that they protect shoot apex. In this species, protection is reinforced by the sheath formed by the stipule pairs.

Coléteres dendróides em Alibertia sessilis (Vell.) K. Schum., uma espécie não-nodulada de Rubiaceae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Two novel reports of semidry stigmatic surface in Asteraceae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cytochemical localization of lipids in the venom glands of worker bees of Apis mellifera (Hymenoptera, Apidae)

The technique of osmium imidazol for the ultrastructural detection of lipids in the secretory cells of the venom gland of 14-days old worker bees of Apis mellifera L. demonstrated the presence of these components at various sites of the gland. These lipids were found mainly associated to the external region of the basal lamina and the microvilli, in the intercellular spaces, in the cuticle of the collecting canaliculi and in the secretion contained in the glandular lumen. Therefore, in addition to revealing the presence of lipids in the secretion, this technique also allowed us to attribute an exogenous origin to the lipids in the secretion; they are taken up from the haemolymph.

Venom gland of Pachycondyla striata worker ants (Hymenoptera : Ponerinae). Ultrastructural characterization

Morphological data concerning the venom gland of worker ants of Pachycondyla striata revealed that this gland consists of three distinct regions: an external secretory portion, composed by a secretory filament that bifurcates in order to give rise to other two filaments; an internal secretory portion, represented by the convoluted gland; and a storage portion, represented by a sac-shaped reservoir. The ultrastructural analysis showed that the reservoir is enveloped by a simple pavementous epithelium, coated internally with a cuticle. The external secretory portion is composed by cells forming a simple cubic epithelium, in which the apical portion presents numerous microvilli while the basal portion of the cells shows infoldings of the plasma membrane containing numerous mitochondria. The convoluted gland possesses cells of irregular morphology with nuclei containing condensed chromatin, suggesting inactivity. However, these cells are in fact undergoing secretory activity, which is probably added to the final secretion produced by the gland. The cytoplasm of these cells contains several elements distributed therein, such as ribosomes and polyribosomes, lipid droplets, and protein inclusions in the form of crystals, thus Suggestive of protein storage, which would be used by the insect when metabolically required. (c) 2005 Elsevier Ltd. All rights reserved.