Realization of fractional-order controllers: analysis, synthesis and application to the velocity control of a servo system

The synthesis and application of fractional-order controllers is now an active research field. This article investigates the use of fractional-order PID controllers in the velocity control of an experimental modular servo system. The systern consists of a digital servomechanism and open-architecture software environment for real-time control experiments using MATLAB/Simulink. Different tuning methods will be employed, such as heuristics based on the well-known Ziegler Nichols rules, techniques based on Bode’s ideal transfer function and optimization tuning methods. Experimental responses obtained from the application of the several fractional-order controllers are presented and analyzed. The effectiveness and superior performance of the proposed algorithms are also compared with classical integer-order PID controllers.

Effect of fractional orders in the velocity control of a servo system

The application of fractional-order PID controllers is now an active field of research. This article investigates the effect of fractional (derivative and integral) orders upon system's performance in the velocity control of a servo system. The servo system consists of a digital servomechanism and an open-architecture software environment for real-time control experiments using MATLAB/Simulink tools. Experimental responses are presented and analyzed, showing the effectiveness of fractional controllers. Comparison with classical PID controllers is also investigated.

Projeto e implementação de um pré-regulador de fator de potência com controlo digital

Hoje em dia as fontes de alimentação possuem correção do fator de potência, devido às diversas normas regulamentares existentes, que introduziram grandes restrições no que respeita à distorção harmónica (THD) e fator de potência (FP). Este trabalho trata da análise, desenvolvimento e implementação de um Pré-Regulador de fator de potência com controlo digital. O controlo digital de conversores com recurso a processamento digital de sinal tem vindo a ser ao longo dos últimos anos, objeto de investigação e desenvolvimento, estando constantemente a surgirem modificações nas topologias existentes. Esta dissertação tem como objetivo estudar e implementar um Pré-Regulador Retificador Boost e o respetivo controlo digital. O controlo do conversor é feito através da técnica dos valores médios instantâneos da corrente de entrada, desenvolvido através da linguagem de descrição de hardware VHDL (VHSIC HDL – Very High Speed Integrated Circuit Hardware Description Language) e implementado num dispositivo FPGA (Field Programmable Gate Array) Spartan-3E. Neste trabalho são apresentadas análises matemáticas, para a obtenção das funções de transferência pertinentes ao projeto dos controladores. Para efetuar este controlo é necessário adquirir os sinais da corrente de entrada, tensão de entrada e tensão de saída. O sinal resultante do módulo de controlo é um sinal de PWM com valor de fator de ciclo variável ao longo do tempo. O projeto é simulado e validado através da plataforma MatLab/Simulink e PSIM, onde são apresentados resultados para o regime permanente e para transitórios da carga e da tensão de alimentação. Finalmente, o Pré-Regulador Retificador Boost controlado de forma digital é implementado em laboratório. Os resultados experimentais são apresentados para validar a metodologia e o projeto desenvolvidos.

Encenação digital: dissertação

Dissertação submetida à Escola Superior de Teatro e Cinema para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Teatro - especialização em Encenação.

Projecto e implementação de osciloscópio digital baseado na norma IEEE1451.0

Os osciloscópios digitais são utilizados em diversas áreas do conhecimento, assumindo-se no âmbito da engenharia electrónica, como instrumentos indispensáveis. Graças ao advento das Field Programmable Gate Arrays (FPGAs), os instrumentos de medição reconfiguráveis, dadas as suas vantagens, i.e., altos desempenhos, baixos custos e elevada flexibilidade, são cada vez mais uma alternativa aos instrumentos tradicionalmente usados nos laboratórios. Tendo como objectivo a normalização no acesso e no controlo deste tipo de instrumentos, esta tese descreve o projecto e implementação de um osciloscópio digital reconfigurável baseado na norma IEEE 1451.0. Definido de acordo com uma arquitectura baseada nesta norma, as características do osciloscópio são descritas numa estrutura de dados denominada Transducer Electronic Data Sheet (TEDS), e o seu controlo é efectuado utilizando um conjunto de comandos normalizados. O osciloscópio implementa um conjunto de características e funcionalidades básicas, todas verificadas experimentalmente. Destas, destaca-se uma largura de banda de 575kHz, um intervalo de medição de 0.4V a 2.9V, a possibilidade de se definir um conjunto de escalas horizontais, o nível e declive de sincronismo e o modo de acoplamento com o circuito sob análise. Arquitecturalmente, o osciloscópio é constituído por um módulo especificado com a linguagem de descrição de hardware (HDL, Hardware Description Language) Verilog e por uma interface desenvolvida na linguagem de programação Java®. O módulo é embutido numa FPGA, definindo todo o processamento do osciloscópio. A interface permite o seu controlo e a representação do sinal medido. Durante o projecto foi utilizado um conversor Analógico/Digital (A/D) com uma frequência máxima de amostragem de 1.5MHz e 14 bits de resolução que, devido às suas limitações, obrigaram à implementação de um sistema de interpolação multi-estágio com filtros digitais.

A study on reducing digital piracy: an analytical network process approach with benefits, opportunities, costs and risks analysis

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

Acabamentos funcionais têxteis aplicados por estamparia digital em substratos têxteis ativados por plasma

Tese de Doutoramento em Engenharia Têxtil

Optimización de Arquitecturas de Procesamiento Digital de Señales en Lógica Programable para Aplicaciones en Vuelos No Tripulados

En dispositivos electrónicos de última generación destinados a funciones de comunicación o control automático, los algoritmos de procesamiento digital de señales trasladados al hardware han ocupado un lugar fundamental. Es decir el estado de arte en el área de las comunicaciones y control puede resumirse en algoritmos basados en procesamiento digital de señales. Las implementaciones digitales de estos algoritmos han sido estudiadas en áreas de la informática desde hace tiempo. Sin embargo, aunque el incremento en la complejidad de los algoritmos modernos permite alcanzar desempeños atractivos en aplicaciones específicas, a su vez impone restricciones en la velocidad de operación que han motivado el diseño directamente en hardware de arquitecturas para alto rendimiento. En este contexto, los circuitos electrónicos basados en lógica programable, principalmente los basados en FPGA (Field-Programmable Gate Array), permiten obtener medidas de desempeño altamente confiables que proporcionan el acercamiento necesario hacia el diseño electrónico de circuitos para aplicaciones específicas “ASIC-VLSI” (Application Specific Integrated Circuit - Very Large Scale Integration). En este proyecto se analiza el diseño y la implementación de aquitecturas electrónicas para el procesamiento digital de señales, con el objeto de obtener medidas reales sobre el comportamiento del canal inalámbrico y su influencia sobre la estimación y el control de trayectoria en vehículos aéreos no tripulados (UAV, Unmanned Aerial Vehicle). Para esto se propone analizar un dispositivo híbrido basado en microcontroladores y circuitos FPGA y sobre este mismo dispositivo implementar mediante algoritmo un control de trayectoria que permita mantener un punto fijo en el centro del cuadro de una cámara de video a bordo de un UAV, que sea eficiente en términos de velocidad de operación, dimensiones y consumo de energía.

Digital gesteuerte Stromquellen für das Lichtbogenschweißen

Digital control, power source, arc welding, process control, information management, transient behaviour, thermal impedance, simulation, duty cycle, system design

Estudi de casos pel control de síntesi d’instruments musicals virtuals mitjançant la veu cantada

Report for the scientific sojourn carried out at the Music Technology Area (Sound Processing and Control Lab), Faculty of Music, McGill University, Montreal, Canada, from October to December 2005.The aim of this research is to study the singing voice for controlling virtual musical instrument synthesis. It includes analysis and synthesis algorithms based on spectral audio processing. After digitalising the acoustic voice signal in the computer, a number of expressive descriptors of the singer are extracted. This process is achieved synchronously, thus all the nuance of the singer performance have been tracked. In a second stage, the extracted parameters are mapped to a sound synthesizer, the so-called digital musical instruments. In order achieve it, several tests with music students of the Faculty of Music, McGill University have been developed. These experiments have contributed to evaluate the system and to derive new control strategies to integrate: clarinet synthesis, bass guitar, visual representation of voice signals.

Cost Factors in Digital Projects: A Model Useful in Other Applications

Description of a costing model developed by digital production librarian to determine the cost to put an item into the Claremont Colleges Digital Library at the Claremont University Consortium. This case study includes variables such as material types and funding sources, data collection methods, and formulas and calculations for analysis. This model is useful for grant applications, cost allocations, and budgeting for digital project coordinators and digital library projects.

Structural analysis of Turtle mountain (Alberta) using digital elevation model: Toward a progressive failure

In 1903, the eastern slope of Turtle Mountain (Alberta) was affected by a 30 M m3-rockslide named Frank Slide that resulted in more than 70 casualties. Assuming that the main discontinuity sets, including bedding, control part of the slope morphology, the structural features of Turtle Mountain were investigated using a digital elevation model (DEM). Using new landscape analysis techniques, we have identified three main joint and fault sets. These results are in agreement with those sets identified through field observations. Landscape analysis techniques, using a DEM, confirm and refine the most recent geology model of the Frank Slide. The rockslide was initiated along bedding and a fault at the base of the slope and propagated up slope by a regressive process following a surface composed of pre-existing discontinuities. The DEM analysis also permits the identification of important geological structures along the 1903 slide scar. Based on the so called Sloping Local Base Level (SLBL) an estimation was made of the present unstable volumes in the main scar delimited by the cracks, and around the south area of the scar (South Peak). The SLBL is a method permitting a geometric interpretation of the failure surface based on a DEM. Finally we propose a failure mechanism permitting the progressive failure of the rock mass that considers gentle dipping wedges (30°). The prisms or wedges defined by two discontinuity sets permit the creation of a failure surface by progressive failure. Such structures are more commonly observed in recent rockslides. This method is efficient and is recommended as a preliminary analysis prior to field investigation.

Estudi microgenètic sobre el desenvolupament del coneixement lletrat en alumnes de Primària en relació amb textosmodel d'una base de dades Web: influència del suport digital i del format de presentació

Aquest projecte representa una recerca en les classes basat en l'eficàcia de la combinació entre activitats de lectura i d'escriptura, textos i tecnologia. Presenta un currículum bé dissenyat que ofereix material als professors per a planificar la instrucció en primària i en pre-escolar. Els materials són una selecció de textos considerats com uns mediadors de la instrucció. L’estudi proporciona un model preliminar per a un currículum basat en textos que ajuden en la lectura i escriptura i en les habilitats inicials. Les lectures són llibres tipus àlbum. Dues dècades en el camp dels llibres infantils, il•lustradors, autors, editors han prestat una major atenció a les maneres del procés d'adquisició de la lectura i de l'escriptura. Aquest estudi representa un pas per a incloure aquest tipus de materials de lectura. Tres característiques de text s'han identificat: a) el contingut lingüístic a nivell de la paraula, i a nivell de l'estructura del text (repeticions dels patrons sintàctics i textuals); b) la diversitat de gènere dels llibres (llibres de narració i d'informació); i c) el control de la càrrega cognitiva (densitat de paraules, repetició i predicció del contingut i relació il•lustració-text). Els participants en aquest estudi eren 25 nens de primer curs i 23 nens pre-escolars i els seus professors (CEIP Lavinia de Barcelona). L'escola va ser seleccionada per la seva disposició a l'ús de tecnologies i els seus interessos de participar en aquest projecte experimental. Durant l'any 2007-08 van desenvolupar aquests textos, les activitats i el programa de tecnologia (Veure www.princepsiprinceses.blogspot.com, i www.conills.blogspot.com). Els efectes de la qualitat instruccional, de la selecció de textos i de l'ús de la tecnologia s'han d'observar en les diferències en les pràctiques de les professores, en les habilitats dels nens i en l'ús de tecnologies en les sales de classe.

Testing low-altitude infrared digital photography from a mini-UAV to retrieve information for biological conservation

Satellite remote sensing imagery is used for forestry, conservation and environmental applications, but insufficient spatial resolution, and, in particular, unavailability of images at the precise timing required for a given application, often prevent achieving a fully operational stage. Airborne remote sensing has the advantage of custom-tuned sensors, resolution and timing, but its price prevents using it as a routine technique for the mentioned fields. Some Unmanned Aerial Vehicles might provide a “third way” solution as low-cost techniques for acquiring remotely sensed information, under close control of the end-user, albeit at the expense of lower quality instrumentation and instability. This report evaluates a light remote sensing system based on a remotely-controlled mini-UAV (ATMOS-3) equipped with a color infra-red camera (VEGCAM-1) designed and operated by CATUAV. We conducted a testing mission over a Mediterranean landscape dominated by an evergreen woodland of Aleppo pine (Pinus halepensis) and (Holm) oak (Quercus ilex) in the Montseny National Park (Catalonia, NE Spain). We took advantage of state-of-the-art ortho-rectified digital aerial imagery (acquired by the Institut Cartogràfic de Catalunya over the area during the previous year) and used it as quality reference. In particular, we paid attention to: 1) Operationality of flight and image acquisition according to a previously defined plan; 2) Radiometric and geometric quality of the images; and 3) Operational use of the images in the context of applications. We conclude that the system has achieved an operational stage regarding flight activities, although with meteorological limits set by wind speed and turbulence. Appropriate landing areas can be sometimes limiting also, but the system is able to land on small and relatively rough terrains such as patches of grassland or short matorral, and we have operated the UAV as far as 7 km from the control unit. Radiometric quality is sufficient for interactive analysis, but probably insufficient for automated processing. A forthcoming camera is supposed to greatly improve radiometric quality and consistency. Conventional GPS positioning through time synchronization provides coarse orientation of the images, with no roll information.

Copper filtration in pediatric digital X-ray imaging: its impact on image quality and dose.

The effect of copper (Cu) filtration on image quality and dose in different digital X-ray systems was investigated. Two computed radiography systems and one digital radiography detector were used. Three different polymethylmethacrylate blocks simulated the pediatric body. The effect of Cu filters of 0.1, 0.2, and 0.3 mm thickness on the entrance surface dose (ESD) and the corresponding effective doses (EDs) were measured at tube voltages of 60, 66, and 73 kV. Image quality was evaluated in a contrast-detail phantom with an automated analyzer software. Cu filters of 0.1, 0.2, and 0.3 mm thickness decreased the ESD by 25-32%, 32-39%, and 40-44%, respectively, the ranges depending on the respective tube voltages. There was no consistent decline in image quality due to increasing Cu filtration. The estimated ED of anterior-posterior (AP) chest projections was reduced by up to 23%. No relevant reduction in the ED was noted in AP radiographs of the abdomen and pelvis or in posterior-anterior radiographs of the chest. Cu filtration reduces the ESD, but generally does not reduce the effective dose. Cu filters can help protect radiosensitive superficial organs, such as the mammary glands in AP chest projections.