Razionalizzazione del flusso delle merci e delle informazioni in un terminal container : il caso terminal container Ravenna

Studio dell'attività, dei flussi e delle procedure di un terminal container. Identificazione di problematiche e riprogettazione del gate-in del terminal. Integrazione di nuove tecnologie ed automazione. Valutazione tecnico economica del progetto.

Analisi e ottimizzazione di un container management system nel settore automotive: Il caso Robert Bosch GmbH.

Il presente elaborato descrive l’attività di progetto svolta durante il periodo di tirocinio presso la business unit “automotive technologies” della Robert Bosch GmbH: la Robert Bosch GmbH Branch in Italy che ha sede a Torino, e che si configura come fornitore di componenti per l’industria automotive. La funzione logistica è l’ufficio in cui si è svolta l’esperienza di tirocinio, che si è sviluppato nell’ambito del progetto di Container Management System. In particolare, è stato analizzato il sistema di gestione dei Returnable Packaging relativi ai componenti che vengono forniti agli stabilimenti dei clienti localizzati in Italia. L’elaborato è composto da due parti: una parte teorica e una parte pratica. La parte teorica espone gli strumenti teorici sui quali si fondano i contenuti sviluppati nella parte pratica. La parte pratica è volta a descrivere l’attività di progetto da un punto di vista strettamente operativo. Il primo capitolo illustra i motivi che hanno determinato l’avvio del progetto. Sono poi messi in evidenza quali sono gli obiettivi intermedi e finali che si intendono raggiungere, declinandoli in termini di organizzazione del lavoro. Sono qui esposte le basi teoriche del metodo utilizzato e della disciplina a cui si fa riferimento. Viene inoltre dato spazio alla trattazione di alcuni topic nell’ambito dei Returnable Packaging, approfondendo l’argomento per il settore automotive. Il secondo capitolo descrive la struttura organizzativa, i settori di business e le attività svolte dal gruppo Robert Bosch GmbH nel mondo e in Italia. Viene dato particolare rilievo alla sede di Torino ed alla divisione logistica di quest’ultima, in modo tale da descrivere il contesto entro il quale si sviluppa il progetto. Il capitolo presenta infine gli attori che operano nella catena logistica analizzata, descrivendone le attività svolte e caratterizzando la rete logistica studiata al fine di definire i confini entro i quali si sviluppa il progetto. Il terzo capitolo presenta l’analisi effettuata sul caso in esame, descrivendone le modalità operative per ciascuna fase. Il quarto capitolo presenta delle osservazioni sull’analisi effettuata, la validazione tecnico econimica delle soluzioni proposte e le considerazioni conclusive.

Stato attuale e prospettive di sviluppo del trasporto marittimo di container nei porti dell'alto adriatico

Le infrastrutture portuali rappresentano un elemento chiave come motore di crescita per l’economia globale. Il 74% delle merci importate ed esportate dall’UE transitano per porti. Per questo motivo sono necessari investimenti in infrastrutture e attrezzature portuali per far fronte alle previsioni di crescita del trasporto merci nel prossimo decennio. La crescita del transhipment, quindi di grossi scali chiamati hub, ha rivoluzionato la scelta delle tratte principali e la scelta degli scali. Nel corso del seguente elaborato ci si è concentrati sulla situazione dell’Alto Adriatico, analizzando lo stato attuale dei principali porti e i possibili sviluppi futuri. La situazione dell’Alto Adriatico è particolare, questi porti si trovano sulle rotte principali del trasporto globale ma vista la crescita di scambi commerciali con la Cina e l’estremo Oriente, per via dello spostamento verso Est del baricentro dell’economia, si trovano in posizione ottimale per diventare un grosso gateway. Questo è l’obbiettivo che si sono prefissati i porti del Nord Adriatico cioè far capire che risalire l’Adriatico, anche se fuori dalle rotte può risultare conveniente visto il risparmio di cinque giorni di navigazione, rispetto ai porti del Nord Europa, che si traduce in un risparmio di tempo e di costi. Per creare attrattiva sono stati svolti, e continuano, numerosi investimenti per lo sviluppo dei fondali e del retroporto, nel tentativo di potersi affermare all’interno del mercato europeo e globale. Nel corso dell’elaborato saranno analizzati i grossi vantaggi di cui godono i porti del Nord Adriatico grazie alla loro posizione geografica, e alcune delle problematiche che ostacolano la crescita.

Modellierung und Bewertung der maritimen Leercontainerlogistik unter Berücksichtigung des Container-Poolings

Vor dem Hintergrund zunehmenden Kostendrucks und der Suche nach Effizienzsteigerungen im Leercontainermanagement gewinnen zukünftig kooperative Gestaltungsansätze vermehrt an Bedeutung. Einen Ansatz zur kooperativen Neugestaltung des Leercontainermanagements in der maritimen Containerlogistik stellt die gemeinsame Nutzung eines Container-Pools durch mehrere Reedereien und Containerleasinggesellschaften dar. Dieses sogenannte Container-Pooling orientiert auf die Reduzierung des Repositionierungs-, Transport-, Umschlag- und Lagerungsaufwands durch gezielte Ausnutzung struktureller Ungleichgewichte. In der Praxis ist dieser Ansatz insbesondere aufgrund unternehmenspolitischer Gründe (Container als Werbeträger) bisher kaum umgesetzt. Für eine Optimierung und zur Unterstützung der operativen Planung sind mathematische Ansätze notwendig, die die verschiedenen Gestaltungsmöglichkeiten des Container-Poolings modellseitig berücksichtigen sowie zwischen Pool-, Reeder- und Leasing-Containern unterscheiden. Ziel dieses Beitrags ist daher die Vorstellung eines mathematischen Optimierungsansatzes, der sowohl die Abläufe der maritimen Containerlogistik beschreibt, als auch die Einsparungspotentiale durch den Einsatz des Container-Poolings quantifiziert. Es wird gezeigt, dass durch den Einsatz des Container-Poolings Kosteneinsparungen im Vergleich zum unkooperativen Verhalten vorliegen.

Container Terminal Simulation. A case study: port of Valencia.

This paper is concerned with the study of non-Markovian queuing systems in container terminals. The methodology presented has been applied to analyze the ship traffic in the port of Valencia located in the Western Mediterranean. Two container terminals have been studied: the public container terminal of NOATUM and the dedicated container terminal of MSC. This paper contains the results of a simulation model based on queuing theory. The methodology presented is found to be effective in replicating realistic ship traffic operations in port as well as in conducting capacity evaluations. Thus the methodology can be used for capacity planning (long term), tactical planning (medium term) and even for the container terminal design (port enlargement purposes).

Berth Management in Container Terminals: Quality of Service

This paper empirically evaluates container terminal service attributes. The methodology proposed focuses on statistical control. Based on the concept of service segmentation, the authors employed control charts to classify container terminal services. The purpose of control charts is to allow simple detection of events that are indicative of actual process change. This simple decision can be difficult where the process characteristic is continuously varying, the control chart provides statistically objective criteria of change. When change is detected and considered good its cause should be identified and possibly become the new way of working, where the change is bad then its cause should be identified and eliminated. Both theoretical and practical implications of the research findings are discussed in this paper.

Berth management in container terminals: quality of service

This paper empirically evaluates container terminal service attributes. The methodology proposed focuses on statistical control. Based on the concept of service segmentation, we employed control charts to classify container terminal services. The purpose of control charts is to allow simple detection of events that are indicative of actual process change. This simple decision can be difficult where the process characteristic is continuously varying; the control chart provides statistically objective criteria of change. When change is detected and considered good its cause should be identified and possibly become the new way of working, where the change is bad then its cause should be identified and eliminated. This paper is organized as follows: Section 1 is the introduction, Section 2 provides a brief note on other studies that inspired this research, section 3 focuses on the methodology used, and develops the results obtained and finally conclusions are shown in Section 4. Theoretical and practical implications of the research findings are discussed.

Neutron spectra and dosimetric assessment around a neutron Howitzer container

The neutron Howitzer container at the Neutron Measurements Laboratory of the Nuclear Engineering Department of the Polytechnic University of Madrid (UPM), is equipped with a 241Am-Be neutron source of 74 GBq in its center. The container allows the source to be in either the irradiation or the storage position. To measure the neutron fluence rate spectra around the Howitzer container, measurements were performed using a Bonner spheres spectrometer and the spectra were unfolded using the NSDann program. A calibrated neutron area monitor LB6411 was used to measure the ambient dose equivalent rates, H*(10). Detailed Monte-Carlo simulations were performed to calculate the measured quantities at the same positions. The maximum relative deviation between simulations and measurements was 19.53%. After validation, the simulated model was used to calculate the equivalent dose rate in several key organs of a voxel phantom. The computed doses in the skin and lenses of the eyes are within the ICRP recommended dose limits, as is the H*(10) value for the storage position.

A methodology proposal to obtain operational parameter forecasts and operational risk assessment in container terminals

Las terminales de contenedores son sistemas complejos en los que un elevado número de actores económicos interactúan para ofrecer servicios de alta calidad bajo una estricta planificación y objetivos económicos. Las conocidas como "terminales de nueva generación" están diseñadas para prestar servicio a los mega-buques, que requieren tasas de productividad que alcanzan los 300 movimientos/ hora. Estas terminales han de satisfacer altos estándares dado que la competitividad entre terminales es elevada. Asegurar la fiabilidad de las planificaciones del atraque es clave para atraer clientes, así como reducir al mínimo el tiempo que el buque permanece en el puerto. La planificación de las operaciones es más compleja que antaño, y las tolerancias para posibles errores, menores. En este contexto, las interrupciones operativas deben reducirse al mínimo. Las principales causas de dichas perturbaciones operacionales, y por lo tanto de incertidumbre, se identifican y caracterizan en esta investigación. Existen una serie de factores que al interactuar con la infraestructura y/o las operaciones desencadenan modos de fallo o parada operativa. Los primeros pueden derivar no solo en retrasos en el servicio sino que además puede tener efectos colaterales sobre la reputación de la terminal, o incluso gasto de tiempo de gestión, todo lo cual supone un impacto para la terminal. En el futuro inmediato, la monitorización de las variables operativas presenta gran potencial de cara a mejorar cualitativamente la gestión de las operaciones y los modelos de planificación de las terminales, cuyo nivel de automatización va en aumento. La combinación del criterio experto con instrumentos que proporcionen datos a corto y largo plazo es fundamental para el desarrollo de herramientas que ayuden en la toma de decisiones, ya que de este modo estarán adaptadas a las auténticas condiciones climáticas y operativas que existen en cada emplazamiento. Para el corto plazo se propone una metodología con la que obtener predicciones de parámetros operativos en terminales de contenedores. Adicionalmente se ha desarrollado un caso de estudio en el que se aplica el modelo propuesto para obtener predicciones de la productividad del buque. Este trabajo se ha basado íntegramente en datos proporcionados por una terminal semi-automatizada española. Por otro lado, se analiza cómo gestionar, evaluar y mitigar el efecto de las interrupciones operativas a largo plazo a través de la evaluación del riesgo, una forma interesante de evaluar el effecto que eventos inciertos pero probables pueden generar sobre la productividad a largo plazo de la terminal. Además se propone una definición de riesgo operativo junto con una discusión de los términos que representan con mayor fidelidad la naturaleza de las actividades y finalmente, se proporcionan directrices para gestionar los resultados obtenidos. Container terminals are complex systems where a large number of factors and stakeholders interact to provide high-quality services under rigid planning schedules and economic objectives. The socalled next generation terminals are conceived to serve the new mega-vessels, which are demanding productivity rates up to 300 moves/hour. These terminals need to satisfy high standards because competition among terminals is fierce. Ensuring reliability in berth scheduling is key to attract clients, as well as to reduce at a minimum the time that vessels stay the port. Because of the aforementioned, operations planning is becoming more complex, and the tolerances for errors are smaller. In this context, operational disturbances must be reduced at a minimum. The main sources of operational disruptions and thus, of uncertainty, are identified and characterized in this study. External drivers interact with the infrastructure and/or the activities resulting in failure or stoppage modes. The later may derive not only in operational delays but in collateral and reputation damage or loss of time (especially management times), all what implies an impact for the terminal. In the near future, the monitoring of operational variables has great potential to make a qualitative improvement in the operations management and planning models of terminals that use increasing levels of automation. The combination of expert criteria with instruments that provide short- and long-run data is fundamental for the development of tools to guide decision-making, since they will be adapted to the real climatic and operational conditions that exist on site. For the short-term a method to obtain operational parameter forecasts in container terminals. To this end, a case study is presented, in which forecasts of vessel performance are obtained. This research has been entirely been based on data gathered from a semi-automated container terminal from Spain. In the other hand it is analyzed how to manage, evaluate and mitigate disruptions in the long-term by means of the risk assessment, an interesting approach to evaluate the effect of uncertain but likely events on the long-term throughput of the terminal. In addition, a definition for operational risk evaluation in port facilities is proposed along with a discussion of the terms that better represent the nature of the activities involved and finally, guidelines to manage the results obtained are provided.

Multi-distributed wireless sensors for monitoring a long distance transport in a reefer container

The study of the temperature gradients in cold stores and containers is a critical issue in the food industry for the quality assurance of products during transport and for minimising losses. This work presents an analysis of the temperatures during the refrigerated transport of 4,320 kg of blueberries in a reefer (set point temperature at ?1ºC) on a container ship from Montevideo (Uruguay) to Verona (Italy). The monitoring was performed by using semi-passive RFID loggers (TurboTag cards). The objective was to carry out a multi-distributed supervision using low-cost, wireless and autonomous sensors for the characterisation of the distribution and spatial gradients of temperatures during a long distance transport. Data analysis shows spatial (phase space) and temporal sequencing diagrams and reveals a significant heterogeneity of temperature at different locations in the container, which highlights the ineffectiveness of a temperature control system based on a single sensor, as is usually done.

Pesticide container processing in commercial reconditioning facilities /

Mode of access: Internet.

Study of plutonium oxide heat generation in a wood moderated container /

The generation of heat due to the radioactive decay of plutonium in the form of plutonium dioxide stored in wooden containers is considered. The results of two experiments in which plutonium dioxide is placed inside wooden blocks and the temperature rise measured at various points is reported. Heat transfer calculations are then performed to show that the data obtained are those which would be expected, i.e., that Fourier's Law adequately describes the situation. The heat build up in a proposed wood moderated shipping container is calculated, using some of the assumptions verified in the described experiments.