Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

O papel da observação na compreensão da natureza do conhecimento científico : uma proposta didática baseada nas reações de combustão

Com vista a abandonar a ideia tradicional de que a observação é objetiva e que, decorrente da objetividade dos factos empíricos é possível estabelecer uma correspondência com a realidade e a verdade, procura-se, através de uma situação experimental problemática, inserida num contexto de História da Ciência, criar um contexto didático apropriado para a compreensão da relação da observação com a teoria que a interpreta. Os resultados obtidos no decurso do Projeto lbero-americano de Avaliação de Atitudes Relativas a Ciência, Tecnologia e Sociedade, através da aplicação do Cuestionario de Opiniones sobre Ciencia-Tecnologia-Sociedad mostraram que a conceção que os alunos têm sobre a Natureza da Ciência e Tecnologia e sobre a relação entre observação e teoria não é a mais adequada. A Sequência de Ensino-Aprendizagem proposta baseia-se na realização de uma atividade experimental problemática e na discussão dos resultados, relacionando-os com a análise e debate de dois textos sobre a Teoria do Flogisto e a Teoria do Oxigénio.

Automatização de um dinamômetro hidráulico para ensaios de motores de combustão interna

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Mecânica, 2015.

Influência do uso de combustíveis alternativos na síntese por combustão via microondas para a produção de materiais cerâmicos com estrutura espinélio

The development and study of detectors sensitive to flammable combustible and toxic gases at low cost is a crucial technology challenge to enable marketable versions to the market in general. Solid state sensors are attractive for commercial purposes by the strength and lifetime, because it isn t consumed in the reaction with the gas. In parallel, the use of synthesis techniques more viable for the applicability on an industrial scale are more attractive to produce commercial products. In this context ceramics with spinel structure were obtained by microwave-assisted combustion for application to flammable fuel gas detectors. Additionally, alternatives organic-reducers were employed to study the influence of those in the synthesis process and the differences in performance and properties of the powders obtained. The organic- reducers were characterized by Thermogravimetry (TG) and Derivative Thermogravimetry (DTG). After synthesis, the samples were heat treated and characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), analysis by specific area by BET Method and Scanning Electron Microscopy (SEM). Quantification of phases and structural parameters were carried through Rietveld method. The methodology was effective to obtain Ni-Mn mixed oxides. The fuels influenced in obtaining spinel phase and morphology of the samples, however samples calcined at 950 °C there is just the spinel phase in the material regardless of the organic-reducer. Therefore, differences in performance are expected in technological applications when sample equal in phase but with different morphologies are tested

Síntese e caracterização de óxidos de cério e cobalto obtidos por gel-combustão e Pechini aplicados às reações de oxidação de n-hexano

Oxide type spinel AB2O4 presents structure adjusted for application in the automobile industry. The spinel of cobalt has many practical applications had its excellent physical and chemical properties such as catalyst in hydrocarbon oxidation reaction. The CeO2 has been used in many of these processes because it assigns to a material with excellent thermal resistance and mechanics, high capacity of oxygen stockage (OSC) among others properties. This work deals with the synthesis, characterization and catalytic application of spinel of cobalt and CeO2 with fluorita structure, obtained for method of Pechini and method of Gel-Combustion. The process of Pechini, the puff was obtained at 300 ºC for 2 h in air. In the process of Gel-Combustion the approximately at 350 ºC material was prepared and burnt for Pyrolysis, both had been calcined at 500 ºC, 700 ºC, 900 ºC and 1050 ºC for 2 h in air. The materials of the calcinations had been characterized by TG/DTA, electronic microscopy of sweepings (MEV), spectroscopy of absorption in the infra-red ray (FTIR) and diffraction of X-rays (DRX). The obtained material reaches the phase oxide at 450 oC for Pechini method and 500 °C for combustion method. The samples were submitted catalytic reaction of n-hexane on superficies of materials. The reactor function in molar ration of 0, 85 mol.h-1.g-1 and temperature of system was 450 °C. The sample obtained for Pechini and support in alumine of superficial area of 178,63 m2.g-1 calcined at 700 ºC, give results of catalytic conversions of 39 % and the sample obtained for method of gel-combustion and support in alumina of 150 mesh calcined at 500 ºC result 13 % of conversion. Both method were selective specie C1

Obtenção e caracterização de dióxido de estanho nanoestruturado pelo método de síntese contínua por combustão em solução

Continuous Synthesis by Solution Combustion was employed in this work aiming to obtain tin dioxide nanostructured. Basically, a precursor solution is prepared and then be atomized and sprayed into the flame, where its combustion occurs, leading to the formation of particles. This is a recent technique that shows an enormous potential in oxides deposition, mainly by the low cost of equipment and precursors employed. The tin dioxide (SnO2) nanostructured has been widely used in various applications, especially as gas sensors and varistors. In the case of sensors based on semiconducting ceramics, where surface reactions are responsible for the detection of gases, the importance of surface area and particle size is even greater. The preference for a nanostructured material is based on its significant increase in surface area compared to conventional microcrystalline powders and small particle size, which may benefit certain properties such as high electrical conductivity, high thermal stability, mechanical and chemical. In this work, were employed as precursor solution tin chloride dehydrate diluted in anhydrous ethyl alcohol. Were utilized molar ratio chloride/solvent of 0,75 with the purpose of investigate its influence in the microstructure of produced powder. The solution precursor flux was 3 mL/min. Analysis with X-ray diffraction appointed that a solution precursor with molar ratio chloride/solvent of 0,75 leads to crystalline powder with single phase and all peaks are attributed to phase SnO2. Parameters as distance from the flame with atomizer distance from the capture system with the pilot, molar ratio and solution flux doesn t affect the presence of tin dioxide in the produced powder. In the characterization of the obtained powder techniques were used as thermogravimetric (TGA) and thermodiferential analysis (DTA), particle size by laser diffraction (GDL), crystallographic analysis by X-ray diffraction (XRD), morphology by scanning electron microscopy (SEM), transmission electron microscopy (TEM), specific surface area (BET) and electrical conductivity analysis. The techniques used revealed that the SnO2 exhibits behavior of a semiconductor material, and a potentially promising material for application as varistor and sensor systems for gas

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate

Estudo do processo de combustão in-situ em reservatórios maduros de óleos médios e leves (high pressure air injection)

Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves

Estudo dos parâmetros operacionais do processo de combustão in situ em reservatório de petróleo pesado

The occurrence of heavy oil reservoirs have increased substantially and, due to the high viscosity characteristic of this type of oil, conventional recovery methods can not be applied. Thermal methods have been studied for the recovery of this type of oil, with a main objective to reduce its viscosity, by increasing the reservoir temperature, favoring the mobility of the oil and allowing an increasing in the productivity rate of the fields. In situ combustion (ISC) is a thermal recovery method in which heat is produced inside the reservoir by the combustion of part of the oil with injected oxygen, contrasting with the injection of fluid that is heated in the surface for subsequent injection, which leads to loss heat during the trajectory to the reservoir. The ISC is a favorable method for recovery of heavy oil, but it is still difficult to be field implemented. This work had as an objective the parametric analysis of ISC process applied to a semi-synthetic reservoir with characteristics of the Brazilian Northeast reservoirs using vertical production and vertical injection wells, as the air flow injection and the wells completions. For the analysis, was used a commercial program for simulation of oil reservoirs using thermal processes, called Steam, Thermal and Advanced Processes Reservoir Simulator (STARS) from Computer Modelling Group (CMG). From the results it was possible to analyze the efficiency of the ISC process in heavy oil reservoirs by increasing the reservoir temperature, providing a large decrease in oil viscosity, increasing its mobility inside the reservoir, as well as the improvement in the quality of this oil and therefore increasing significantly its recovered fraction. Among the analyzed parameters, the flow rate of air injection was the one which had greater influence in ISC, obtaining higher recovery factor the higher is the flow rate of injection, due to the greater amount of oxygen while ensuring the maintenance of the combustion front

Processos de secagem da matéria fresca do capim-elefante e do sorgo biomassa visando sua combustão direta.

2016

O exercício físico melhora a sensibilidade à insulina de ratos expostos à fumaça de cigarro

INTRODUÇÃO E OBJETIVO: Sabe-se que o tabagismo pode provocar alterações cardiovasculares e redução na sensibilidade à insulina, e que o exercício físico melhora este quadro. O objetivo do estudo foi avaliar o efeito do tabagismo e da prática de atividade física sobre a sensibilidade à insulina em músculo cardíaco de ratos, através da avaliação de expressão do transportador de glicose GLUT4. MÉTODOS: Ratos machos Wistar foram divididos em quatro grupos: (CS) controle, (CE) controle exercitado, (FS) fumante sedentário e (FE) fumante submetido ao exercício físico. Os grupos FS e FE foram submetidos à combustão de quatro cigarros/30 min/60 dias, 2x/dia. Os grupos CE e FE executaram corrida em esteira rolante durante 60 min/60 dias. Foi realizado teste de tolerância à insulina, e a expressão de GLUT4 no coração foi feita através de Western Blotting - ECL e RT-PCR. Foi utilizado método estatístico descritivo e o teste ANOVA, e as diferenças entre os grupos foram consideradas significantes quando P < 0,05. RESULTADOS: Nem o tabagismo nem a atividade física alteraram o peso corpóreo (CS: 364,7 ± 9,7; CE: 372,4 ± 7,2, FS: 368,9 ± 6,7; FE: 376,4 ± 7,8g) e o peso do coração (CS: 1,12 ± 0,05; CE: 1,16 ± 0,04; FS: 1,14 ± 0,05; FE: 1,19 ± 0,05g). A sensibilidade à insulina foi reduzida no grupo fumante, porém, a prática de exercício físico melhorou este quadro (CS: 3,7 ± 0,3; CE: 5,28 ± 0,5*; FS: 2,1 ± 0,7*; FE: 4,8 ± 0,09** %/min; *P < 0,05 vs. CS, **P < 0,05 vs. FS). Os conteúdos de RNAm e de proteína não se alteraram entre os grupos. Porém, quando se calculou o conteúdo total de proteína GLUT4 por grama de tecido, observou-se que o tabagismo causou redução e que o exercício induziu aumento neste parâmetro (CS: 119,72 ± 9,98; CE: 143,09 ± 9,09; FS: 84,36 ± 10,99*; FE: 132,18 ± 11,40# UA/g tecido, *P < 0,05 vs. CS, #P < 0,01 vs. FS). CONCLUSÃO: Conclui-se que o tabagismo reduz a sensibilidade à insulina e a capacidade do coração captar glicose. Já a prática de exercício físico moderado reverte este quadro por completo.

Queimadas de cana-de-açúcar no Brasil: efeitos à saúde respiratória

O artigo objetivou atualizar as informações sobre a produção científica referente aos efeitos da queima da cana-de-açúcar à saúde respiratória, em vista da expansão das plantações de cana no Brasil e no estado de São Paulo. São comentados estudos publicados no período de 1996-2006 que tratam de efeitos à saúde da queima da cana e/ou de poluentes atmosféricos produzidos pela queima. Os estudos sugerem que uma parcela da população - sobretudo de idosos, crianças e asmáticos - tem sua saúde agravada pela queima da cana-de-açúcar, demandando atendimento dos serviços de saúde e assim onerando os serviços de saúde e suas famílias

Processo auto - sustentável de sinterização de pelotas de minério de ferro: influência da estrutura

O Brasil é um dos países que possuem as maiores jazidas de minério de ferro do mundo. Devido aos recursos financeiros envolvidos, mão-de-obra, arrecadação de impostos, envolvimento de atividades logísticas e comercialização exterior, a mineração é uma das principais atividades econômicas do país, envolvendo nesse contexto as plantas de pelotização de minério de ferro. As pelotas de minério de ferro são um dos insumos essenciais utilizados na produção mundial do aço. Compostas essencialmente de óxido de ferro (Fe2O3), são aglomerados com diâmetro que varia de 6,3 a 16 mm, cuja sua produção envolve a combustão para que obtenham a resistência mecânica necessária para serem utilizadas nos alto fornos siderúrgicos. Tal característica impede que as pelotas se quebrem e se transformem em finos, dificultando a permeação do ar através da carga do alto forno e consequentemente reduzindo a eficiência da queima e produção do ferro gusa, o qual é transformado em aço nas etapas posteriores de refino. Para garantir a produção de pelotas com a qualidade desejada, especialmente nos aspectos de composição e resistência mecânica, foi proposta queima controlada em reator de leito fixo simulando as características dos fornos utilizados na indústria. Com os resultados obtidos, foi possível correlacionar nível de temperatura, consumo de O2 e geração de CO2 e resistência à compressão, permitindo o aprimoramento do processo de combustão de pelotas, além de atestar a possibilidade de utilização de outros combustíveis sólidos como alternativas ao gás natural.

Tensão térmica e taxa de reação em um reator para gaseificação de biomassa do tipo concorrente

A conversão da energia química da biomassa em outras formas de energia pode ser processada de diversas maneiras. Dentre essas, encontra-se a gaseificação, que utiliza reatores para conversão da biomassa em gás combustível. Para o dimensionamento de um gaseificador e seus constituintes, vários fatores devem ser levados em consideração, desde as características do combustível até as reais necessidades de energia térmica liberada. Especificamente no dimensionamento da grelha, alguns índices servem de referência, como a tensão térmica e a taxa de reação. Este trabalho teve como objetivos determinar a taxa de reação e a tensão térmica de uma grelha plana utilizada em um gaseificador bem como comparar os valores obtidos com aqueles recomendados para o dimensionamento de grelhas em fornalhas. Foi utilizado um gaseificador de biomassa de fluxo concorrente de pequena escala, ao qual foi acoplada uma câmara para combustão do gás produzido. O combustível utilizado foi toretes de eucalipto, em pedaços com diâmetro de 4 a 8 cm e comprimento de 10 a 20 cm. Conclui-se que os índices de taxa de reação e tensão térmica encontrados podem ser utilizados como parâmetros para o dimensionamento de grelhas de gaseificadores de leito fixo.

Desempenho na barra de tração de um trator agrícola de pneus, alimentado com misturas de óleo diesel e óleo de soja reutilizado

O petróleo é a principal fonte de energia para motores de combustão interna, possibilitando sua transformação em energia mecânica. A dependência do petróleo conduz à necessidade de alternativas, mediante o cultivo de matérias-primas renováveis. Os problemas atuais são os custos dos biocombustíveis, que são maiores que dos derivados do petróleo, e o fato de que não existem muitos motores de combustão adequados ao uso de óleos vegetais. Em vista disso, são necessárias mais investigações quanto às técnicas de produção e de refino dos biocombustíveis e, ainda, à adequação de motores ao uso de óleos vegetais, para que estes possam ser uma alternativa viável. O objetivo deste trabalho foi caracterizar as diferentes misturas e avaliar o desempenho de um trator agrícola de pneus, utilizando misturas de óleo Diesel (OD) com óleo de soja reutilizável (OSR). Primeiramente, foi realizado um estudo de densidade, viscosidade das misturas e comportamento da temperatura do OD no sistema de alimentação de combustível no motor. Após as análises, verificou-se, por meio de ensaios na barra de tração, o desempenho das misturas de OD e OSR. As principais conclusões deste trabalho foram: a densidade e viscosidade das misturas sofrem variações com o aumento da quantidade de OSR e com a variação da temperatura. Para as avaliações na barra de tração, os melhores resultados observados no rendimento do trator foram verificados com o aumento das percentagens de mistura (25% OSR, para carga N, 25, 75 e 100% OSR, para a quarta marcha, como carga, e 75 e 100% OSR, para a terceira, segunda e primeira marcha, como carga).