Removal of reactive dye from aqueous solution using thermally treated red mud

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Streptococcus mutans-derived extracellular matrix in cariogenic oral biofilms

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo das aplicações das variedades de um quartzo-sienito com hiperstênio, como rochas ornamentais, com auxílio da caracterização tecnológica e das análises de cor e imagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

EFFECT OF THERMAL TREATMENT ON THE CHEMICAL CHARACTERISTICS OF WOOD FROM Eucalyptus grandis W. Hill ex Maiden UNDER DIFFERENT ATMOSPHERIC CONDITIONS

Thermal treatment (thermal rectification) is a process in which technological properties of wood are modified using thermal energy, the result of Which is often value-added wood. Thermally treated wood takes on similar color shades to tropical woods and offers considerable resistance to destructive microorganisms and climate action, in addition to having high dimensional stability and low hygroscopicity. Wood samples of Eucalyptus grandis were subjected to various thermal treatments, as performed in presence (140 degrees C; 160 degrees C; 180 degrees C) or in absence of oxygen (160 degrees C; 180 degrees C; 200 degrees C) inside a thermal treatment chamber, and then studied as to their chemical characteristics. Increasing the maximum treatment temperatures led to a reduction in the holocellulose content of samples as a result of the degradation and volatilization of hemicelluloses, also leading to an increase in the relative lignin content. Except for glucose, all monosaccharide levels were found to decrease in samples after the thermal treatment at a maximum temperature of 200 degrees C. The thermal treatment above 160 degrees C led to increased levels of total extractives in the wood samples, probably ascribed to the emergence of low molecular weight substances as a result of thermal degradation. Overall, it was not possible to clearly determine the effect of presence or absence of oxygen in the air during thermal treatment on the chemical characteristics of the relevant wood samples.

Effect of thermal treatment on the chemical characteristics of wood from Eucalyptus grandis W. Hill ex Maiden under different atmospheric conditions

Thermal treatment (thermal rectification) is a process in which technological properties of wood are modified using thermal energy, the result of which is often value-added wood. Thermally treated wood takes on similar color shades to tropical woods and offers considerable resistance to destructive microorganisms and climate action, in addition to having high dimensional stability and low hygroscopicity. Wood samples of Eucalyptus grandis were subjected to various thermal treatments, as performed in presence (140ºC; 160ºC; 180ºC) or in absence of oxygen (160ºC; 180ºC; 200ºC) inside a thermal treatment chamber, and then studied as to their chemical characteristics. Increasing the maximum treatment temperatures led to a reduction in the holocellulose content of samples as a result of the degradation and volatilization of hemicelluloses, also leading to an increase in the relative lignin content. Except for glucose, all monosaccharide levels were found to decrease in samples after the thermal treatment at a maximum temperature of 200ºC. The thermal treatment above 160ºC led to increased levels of total extractives in the wood samples, probably ascribed to the emergence of low molecular weight substances as a result of thermal degradation. Overall, it was not possible to clearly determine the effect of presence or absence of oxygen in the air during thermal treatment on the chemical characteristics of the relevant wood samples.

Stripe based clothes segmentation

[EN]In this paper, a clothes segmentation method for fashion parsing is described. This method does not rely in a previous pose estimation but people segmentation. Therefore, novel and classic segmentation techniques have been considered and improved in order to achieve accurate people segmentation. Unlike other methods described in the literature, the output is the bounding box and the predominant color of the different clothes and not a pixel level segmentation. The proposal is based on dividing the person area into an initial fixed number of stripes, that are later fused according to similar color distribution. To assess the quality of the proposed method the experiments are carried out with the Fashionista dataset that is widely used in the fashion parsing community.

Elektrophysiologische Charakterisierung der Neurone im Tectum opticum des Goldfisches hinsichtlich Farbe und Bewegung

Die vorliegende Arbeit verfolgte mehrere Ziele. Die Hauptaufgabe war es, farbsensitive und bewegungssensitive Neurone im Tectum opticum des Goldfisches zu finden und diese hinsichtlich ihres Antwortverhaltens zu charakterisieren. Aus Verhaltensversuchen ist bekannt, dass sowohl das Ganzfeldbewegungssehen als auch das Objektbewegungssehen „farbenblind“ ist, da die Verarbeitung dieser Sehleistungen jeweils nur von einem Zapfentyp getrieben wird. Es sollte untersucht werden, ob sich diese Farbenblindheit auch auf Ebene der tectalen bewegungsempfindlichen Neurone finden lässt. Schließlich sollten die Ableitorte im Tectum opticum kartiert werden, um festzustellen, ob es jeweils bestimmte örtlich abgegrenzte Areale für Farbe einerseits und für Bewegung andererseits gibt.rnDie Aktivität von tectalen Units wurde durch extrazelluläre Ableitungen registriert. Um farbspezifische Neurone zu identifizieren und zu charakterisieren, wurden 21 verschiedene Farbpapiere (HKS-Standard) aus dem gesamten Farbenkreis (ausgenommen UV) präsentiert. Auf jedes Farbpapier folgte ein neutrales Graupapier. Des Weiteren wurde eine Schwarz-Weiß-Grau-Sequenz gezeigt, um das Antwortverhalten der Units auf Helligkeitswechsel zu prüfen. Jeder Stimulus wurde für fünf Sekunden präsentiert und die gesamte Stimulussequenz wurde mindestens dreimal wiederholt. Zur Identifizierung bewegungssensitiver Neurone wurde ein sich exzentrisch bewegendes schwarz-weißes Zufallspunktmuster präsentiert. Um die „Farbenblindheit“ des Bewegungssehens zu testen, wurden zwei rot-grüne Zufallspunktmuster präsentiert, die den L-Zapfen des Goldfisches unterschiedlich stark modulierten. Den meisten Units wurden sowohl die Farb- als auch die Bewegungsstimuli gezeigt.rnEs konnten 69 Units abgeleitet werden. Von diesen antworteten 34 sowohl auf Farbstimuli als auch auf Helligkeitsreize, 19 Units reagierten ausschließlich auf Farbstimuli, 15 Units zeigten sich nur für den Bewegungsstimulus sensitiv und zwei Units beantworteten ausschließlich Helligkeitswechsel. Die farbempfindlichen Units konnten in 14 Gruppen eingeteilt werden: sechs Gruppen im Rotbereich (22 Units), fünf Gruppen im Blau-Grünbereich (21 Units), eine Gruppe im Gelbbereich (zwei Units), eine Gruppe, die alle Farbstimuli mit Erhöhung der Aktivität (sechs Units) und eine Gruppe, die alle Farbstimuli mit Erniedrigung der Aktivität (eine Unit) beantwortete. Es wurden zwei Arten von Gegenfarbzellen gefunden: Rot-ON/Blau-und-Grün-OFF (12 Units) und Rot-OFF/Blau-und-Grün-ON (sieben Units). Es wurden verschiedene zeitliche Antwortmuster gefunden. Während einige Units nur Reizwechsel beantworteten, zeigten die meisten Units ein tonisches Antwortverhalten. Manche Units beantworteten jeden Stimuluswechsel phasisch und darüber hinaus bestimmte Stimuli tonisch. Die meisten tectalen Neurone zeigten eine Grundaktivität. Alle Units, denen sowohl der Farb- als auch der Bewegungsstimulus gezeigt wurden, antworteten nur auf eine Stimulusart. rnDiese Ergebnisse lassen folgende Schlüsse zu: Die Verarbeitung von Farbe und Bewegung im Tectum opticum des Goldfischs wird über zwei unterschiedlichen Verarbeitungswegen geleistet, da alle Units entweder auf Farb- oder auf Bewegungsstimuli antworten. Das Bewegungssehen wird im Goldfisch durch nur einen Zapfentyp (M- oder L-Zapfen) vermittelt und ist somit “farbenblind”, da alle bewegungssensitiven Units die Aktivität einstellten, wenn der Stimulus nur noch einen Zapfentyp modulierte. Es scheint spezifische Areale für „Farbe“ und „Bewegung“ im Tectum opticum des Goldfisches zu geben, da bewegungssensitive Units bevorzugt im posterio-medialen Bereich in einer Tiefe zwischen 200-400 µm gefunden und farbspezifische Units vor allem im anterio-medialen Bereich entdeckt wurden.

When conditioned responses "fire back": bidirectional cross-activation creates learning opportunities in synesthesia

In grapheme-color synesthesia, the letter "c" printed in black may be experienced as red, but typically the color red does not trigger the experience of the letter "c." Therefore, at the level of subjective experience, cross-activation is usually unidirectional. However, recent evidence from digit-color synesthesia suggests that at an implicit level bidirectional cross-activation can occur. Here we demonstrate that this finding is not restricted to this specific type of synesthesia. We introduce a new method that enables the investigation of bidirectionality in other types of synesthesia. We found that a group of grapheme-color synesthetes, but not a control group, showed a startle in response to a color-inducing grapheme after a startle response was conditioned to the specific corresponding color. These results implicate that when the startle response was associated with the real color an association between shock and the grapheme was also established. By this mechanism (i.e. implicit cross-activation) the conditioned response to the real color generalized to the synesthetic color. We suggest that parietal brain areas are responsible for this neural backfiring.

Preparation and optimization of calcium fluoride particles for dental applications.

Fluorides are used in dental care due to their beneficial effect in tooth enamel de-/remineralization cycles. To achieve a desired constant supply of soluble fluorides in the oral cavity, different approaches have been followed. Here we present results on the preparation of CaF2 particles and their characterization with respect to a potential application as enamel associated fluoride releasing reservoirs. CaF2 particles were synthesized by precipitation from soluble NaF and CaCl2 salt solutions of defined concentrations and their morphology analyzed by scanning electron microscopy. CaF2 particles with defined sizes and shapes could be synthesized by adjusting the concentrations of the precursor salt solutions. Such particles interacted with enamel surfaces when applied at fluoride concentrations correlating to typical dental care products. Fluoride release from the synthesized CaF2 particles was observed to be largely influenced by the concentration of phosphate in the solution. Physiological solutions with phosphate concentration similar to saliva (3.5 mM) reduced the fluoride release from pure CaF2 particles by a factor of 10-20 × as compared to phosphate free buffer solutions. Fluoride release was even lower in human saliva. The fluoride release could be increased by the addition of phosphate in substoichiometric amounts during CaF2 particle synthesis. The presented results demonstrate that the morphology and fluoride release characteristics of CaF2 particles can be tuned and provide evidence of the suitability of synthetic CaF2 particles as enamel associated fluoride reservoirs.

Toothbrushing after an erosive attack: will waiting avoid tooth wear?

The purpose of this study was to determine if storage for up to 4 h in human saliva results in a decrease of erosive tooth wear (ETW) and in an increase of surface microhardness (SMH) of enamel samples after an erosive attack with subsequent abrasion. Furthermore, we determined the impact of individual salivary parameters on ETW and SMH. Enamel samples were distributed into five groups: group 1 had neither erosion nor saliva treatment; groups 2-5 were treated with erosion, then group 2 was placed in a humid chamber and groups 3-5 were incubated in saliva for 30 min, 2 h, and 4 h, respectively. After erosion and saliva treatments, all groups were treated with abrasion. Surface microhardness and ETW were measured before and after erosion, incubation in saliva, and abrasion. Surface microhardness and ETW showed significant changes throughout the experiment: SMH decreased and ETW increased in groups 2-5, regardless of the length of incubation in saliva. The results of groups 3-5 (exposed to saliva) were not significantly different from those of group 2 (not exposed to saliva). Exposure of eroded enamel to saliva for up to 4 h was not able to increase SMH or reduce ETW. However, additional experiments with artificial saliva without proteins showed protection from erosive tooth wear. The recommendation to postpone toothbrushing of enamel after an erosive attack should be reconsidered.

Palynofacies analysis of sediments in the eastern Equatorial Atlantic

Analyses of the palynofacies and sporomorph thermal alteration indices (TAI) of sediments from Ocean Drilling Program (ODP) Sites 959 to 962 in the Cote d'Ivoire-Ghana Transform Margin, West Africa were undertaken to (1) determine the source and depositional conditions of the organic matter in the sediments, (2) refine a paleobathymetric curve derived from other data for Site 959, which drilled the most continuous sedimentary sequence from Pleistocene to Albian and (3) interpret the paleothermal history of the area. Twelve types of dispersed organic matter were identified: amorphous organic matter (AOM), marine palynomorphs, algae, resins, black debris, yellow-brown fragments, black-brown fragments, cuticles, plant tissue, wood, sporomorphs and fungi, The relative abundances of these organic matter components at each site were analyzed using cluster analysis, resulting in the identification of seven palynofacies assemblages at Site 959, five each at sites 960 and 961, and four at Site 962. Amorphous organic matter (which is chiefly marine derived), black debris and wood have played the most significant role in defining palynofacies assemblages. The palynofacies assemblages show some correlation with lithologic units, sediment sources and depositional environments. Previous palynofacies studies in passive margins have demonstrated that changes in the ratio of AOM to terrestrial organic matter are related primarily to proximal-distal positions of depositional environments relative to the shoreline. However, this assumption does not always hold true for a transform margin where tectonic factors play an important role in the organic matter distribution, at least in the early stages of evolution. Lithofacies, CCD paleodepths for the North Atlantic, trace fossil association, benthic foraminifera and palynofacies data were the criteria used for reconstructing a paleobathymetric curve for Site 959. A cyclicity in the organic matter distribution of the Upper Miocene to Lower Pliocene pelagic sediments could be related to fluctuations in productivity of biosiliceous and calcareous organisms, and sedimentation rates. A drastic increase in the amount of AOM and a decrease in black debris and wood in the carbonate and clastic rocks (Lithologic Unit IV) overlying the tectonized Albian sediments (Lithologic Unit V) at Sites 959 and 960 coincide with the presence of an unconformity. Qualitative color analysis of palynomorphs was undertaken for all sites, although the main focus was on Site 959 where detailed organic geochemical data were available. At Site 959, TAI values indicate an immature stage of organic maturation (<2) down to the black claystones of Lithologic Unit III at about 918.47 mbsf. Below this, samples show an increase with depth to a moderately mature stage (>2 except for the claystone samples between 1012.52 and 1036.5 mbsf, and one limestone sample at 1043.4 mbsf), reaching peak levels of 2.58 to 3.0 in the tectonized Albian sediments below the unconformity. These TAI values show a positive correlation with the Tma x values derived from Rock-Eval pyrolysis data. The highest values recorded in the basal tectonized units at all the sites (Sites 960-962 have mean values between 2.25 and 3.13) may be related to high heat flow during the intracontinental to syntransform basin stage in the region.

New galactic star clusters discovered in the VVV survey. Candidates projected on the inner disk and bulge

Context. VISTA Variables in the Vía Láctea (VVV) is one of six ESO Public Surveys using the 4 meter Visible and Infrared Survey Telescope for Astronomy (VISTA). The VVV survey covers the Milky Way bulge and an adjacent section of the disk, and one of the principal objectives is to search for new star clusters within previously unreachable obscured parts of the Galaxy. Aims. The primary motivation behind this work is to discover and analyze obscured star clusters in the direction of the inner Galactic disk and bulge. Methods. Regions of the inner disk and bulge covered by the VVV survey were visually inspected using composite JHKS color images to select new cluster candidates on the basis of apparent overdensities. DR1, DR2, CASU, and point spread function photometry of 10 × 10 arcmin fields centered on each candidate cluster were used to construct color–magnitude and color–color diagrams. Follow-up spectroscopy of the brightest members of several cluster candidates was obtained in order to clarify their nature. Results. We report the discovery of 58 new infrared cluster candidates. Fundamental parameters such as age, distance, and metallicity were determined for 20 of the most populous clusters.

Maine, 1798 Raster Image

This layer is a digitized geo-referenced raster image of a 1798 map of Maine drawn by D.F. Sotzmann. These Sotzmann maps (10 maps of New England and Mid-Atlantic states) typically portray both natural and manmade features. They are highly detailed with symbols for churches, roads, court houses, distilleries, iron works, mills, academies, county lines, town lines, and more. Relief is usually indicated by hachures and country boundaries have also been drawn. Place names are shown in both German and English and each map usually includes an index to land grants. Prime meridians used for this series are Greenwich and Washington, D.C.

New Hampshire, 1796 Raster Image

This layer is a digitized geo-referenced raster image of a 1796 map of New Hampshire drawn by D.F. Sotzmann. These Sotzmann maps (10 maps of New England and Mid-Atlantic states) typically portray both natural and manmade features. They are highly detailed with symbols for churches, roads, court houses, distilleries, iron works, mills, academies, county lines, town lines, and more. Relief is usually indicated by hachures and country boundaries have also been drawn. Place names are shown in both German and English and each map usually includes an index to land grants. Prime meridians used for this series are Greenwich and Washington, D.C.

Vermont, 1796 Raster Image

This layer is a digitized geo-referenced raster image of a 1796 map of Vermont drawn by D.F. Sotzmann. These Sotzmann maps (10 maps of New England and Mid-Atlantic states) typically portray both natural and manmade features. They are highly detailed with symbols for churches, roads, court houses, distilleries, iron works, mills, academies, county lines, town lines, and more. Relief is usually indicated by hachures and country boundaries have also been drawn. Place names are shown in both German and English and each map usually includes an index to land grants. Prime meridians used for this series are Greenwich and Washington, D.C.