143 resultados para Chapéu submerso


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dois arquivos, um no formato PNG e outro em formato SVG. Dimensão: 390x699px.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersible Pumping is an option that has been gaining ground among the methods of Artificial Lift due to the ability to handle a large flow of liquid in onshore and offshore environments. The performance of a well equipped with ESP systems is intrinsically related to the centrifugal pump operation. It is the pump that has the function to turn the motor power into Head. In this present work, a computer model to analyze the three-dimensional flow in a centrifugal pump used in Electric Submersible Pumping has been developed. Through the commercial program, ANSYS® CFX®, initially using water as fluid flow, the geometry and simulation parameters have been defined in order to obtain an approximation of what occurs inside the channels of the impeller and diffuser pump in terms of flow. Three different geometry conditions were initially tested to determine which is most suitable to solving the problem. After choosing the most appropriate geometry, three mesh conditions were analyzed and the obtained values were compared to the experimental characteristic curve of Head provided by the manufacturer. The results have approached the experimental curve, the simulation time and the model convergence were satisfactory if it is considered that the studied problem involves numerical analysis. After the tests with water, oil was used in the simulations. The results were compared to a methodology used in the petroleum industry to correct viscosity. In general, for models with water and oil, the results with single-phase fluids were coherent with the experimental curves and, through three-dimensional computer models, they are a preliminary evaluation for the analysis of the two-phase flow inside the channels of centrifugal pump used in ESP systems

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O trabalho foi realizado com o objetivo de descrever morfologicamente os frutos, sementes e plântulas de castanheira. Foi feita a biometria dos frutos e das sementes e sua caracterização quanto à forma, por meio de mensurações com paquímetro e observações realizadas em estereomicroscópio com câmara clara. Os frutos de castanheira são carnosos, indeiscentes, do tipo nucóide, glabros, de coloração verde a vinácea, projeção das nervuras carpelares externamente evidentes, com epicarpo delgado, mesocarpo carnoso e esponjoso de coloração vinácea, com feixes vasculares conspícuos em corte transversal. Geralmente, cada fruto contém apenas uma semente. As sementes são exalbuminosas, de formas alongadas e cilíndricas, recobertas por endocarpo rígido de coloração marrom; possuem cerca de 2,5cm, 0,7cm e 0,7cm, de comprimento, largura e espessura, respectivamente. A germinação das sementes de castanheira é epígea, e a plantula é fanerocotiledonar.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objetivou-se com este trabalho classificar em seguras ou inseguras as condições de trabalho de aplicação da formulação comercial de paraquat a 0,5% e de abastecimento dos tanques em operação de repasse em cultura de cana-de-açúcar com os pulverizadores costal manual, costal pressurizado e Pulmipur manual; determinar o efeito das variações na operação de repasse em quatro usinas de açúcar e álcool com o pulverizador costal pressurizado sobre as exposições dos trabalhadores ao paraquat; determinar a eficácia de equipamentos de proteção individual nessas condições de trabalho; e avaliar a intensidade da deriva e a eficácia de acessórios protetores de deriva. As exposições dérmicas e respiratórias dos trabalhadores foram avaliadas e utilizadas para calcular a margem de segurança (MS). Os valores de MS foram utilizados para classificar essas condições de trabalho em seguras (MS > 1) ou em inseguras (MS < 1). Para avaliar a deriva das aplicações na cultura e a eficácia dos protetores de deriva, foram estudados os tratamentos: formulação comercial de paraquat a 0,5% na calda, aplicada com o costal manual, sem e com o chapéu de proteção de deriva; com o costal pressurizado, sem e com a planilha de proteção de deriva; formulação comercial de paraquat pura com o Pulmipur; formulação comercial de glyphosate a 1% com o costal pressurizado e com a planilha, e puro com o Pulmipur; e testemunha sem aplicação. As duas atividades com o Pulmipur proporcionam as maiores exposições dérmicas, devido ao manuseio da formulação, e são inseguras sem o uso dos EPIs e seguras com estes. As atividades com o pulverizador costal manual ou pressurizado são seguras com ou sem os EPIs. As grandes diferenças nas EDs dos trabalhadores se devem às diferenças no tempo de trabalho diário e no número de trabalhadores nas equipes entre as usinas de açúcar e álcool. O protetor de deriva tipo chapéu é eficaz no controle da deriva na aplicação do paraquat, e a planilha, não.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Foram analisadas 40 amostras de salmouras empregadas na salga por submersão de queijos tipo mussarela, em uma indústria de laticínios do Estado de São Paulo, Brasil, com o objetivo de se conhecer a variação das características físico-químicas e microbiológicas durante o período de sua utilização. Os valores médios do pH, concentração de cloreto de sódio e de proteínas solúveis, desde o preparo da salmoura até o 21° dia de utilização, variaram de 7,21 a 5,76, 27,1 a 24,5 e de zero a 0,126 mg/ml, respectivamente. Por outro lado, os valores médios das contagens de microrganismos mesófilos e do número mais provável de coliformes totais e de origem fecal variaram de 5,8 x 10 UFC/ml a 6,9 x 10(4) UFC/ml, zero a 1,6 x 10(5)/100ml e zero a 1,1 x 10(5)/100ml, respectivamente. Além disso, os valores médios das contagens de bolores e leveduras e de Staphylococcus coagulase positiva, variaram de 0,4 x 10 UFC/ml a 2,0 x 10³ UFC/ml e de zero a 1,3 x 10 UFC/ml, respectivamente. Os resultados encontrados sugerem a existência de condições higiênicas inadequadas durante o preparo e utilização das salmouras, de modo a representar uma importante fonte de contaminação para os queijos. em decorrência deste fato, existe a possibilidade do comprometimento da qualidade dos queijos, de modo a representar risco potencial à população consumidora.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Com o objetivo de avaliar os efeitos da aplicação em jato dirigido com e sem proteção do bico de pulverização através de chapéu-de-napoleão para misturas de herbicidas de ação total na cultura da mamoneira de porte anão, na safra 2004/2005, um experimento foi conduzido no município de Garça-SP, utilizando-se o híbrido Lyra e espaçamento de 1,0 x 0,5 m. O delineamento experimental utilizado foi o de blocos casualizados, com tratamentos em esquema fatorial 2 x 10, com quatro repetições, em que o primeiro fator representou a forma de aplicação de jato dirigido com e sem uso de chapéu-de-napoleão e o segundo os herbicidas: glyphosate (0,72 kg ha-1); glyphosate + 2,4-D (0,72 + 0,35 kg ha-1); glyphosate + flumioxazin (0,72 + 0,025 kg ha-1); glyphosate + carfentrazone-ethyl (0,72 + 0,016 kg ha-1); glyphosate + diuron (0,72 + 0,75 kg ha-1); MSMA + diuron (1,44+ 0,75 kg ha-1); paraquat + diuron (0,9 kg ha-1); paraquat + diquat (0,20 + 0,20 kg ha-1); paraquat + bentazon (0,40 + 0,48 kg ha-1); e testemunha capinada. A aplicação dos herbicidas foi feita em pós-emergência das plantas daninhas, nas entrelinhas da cultura, utilizando-se pulverizador costal pressurizado com CO2, com uma ponta XR 8002-VS para o uso de chapéu-de-napoleão e duas pontas XR 11002-VS, espaçadas de 50 cm, para condição sem proteção, ambas com consumo de calda equivalente a 200 L ha-1. O herbicida glyphosate e as misturas de paraquat + bentazon, glyphosate + 2,4-D e paraquat + diquat proporcionaram os maiores níveis de produtividade da mamoneira Lyra quando aplicados em jato dirigido e com auxílio de chapéu-de-napoleão. As misturas paraquat + bentazon (0,40 + 0,48 kg ha-1) e paraquat + diquat (0,20 + 0,20 kg ha-1) demonstraram ser as mais indicadas para aplicação em jato dirigido com proteção do bico de pulverização.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A ferrugem de espécies de Capsicum spp. (pimenta e pimentão), é causada pelo fungo Puccinia pampeana, pode causar perdas totais em plantios de diversas espécies de Capsicum, onde preodminam temperaturas ao redor de 21ºC. Esta ferrugem, mesmo sendo específica do gênero Capsicum, e mesmo muitas espécies dentro deste gênero sendo suscetíveis, algumas apresentam reação de hipersensibilidade. Foi o caso de Capsicum annuum (pimenta cv. Cayenne) e C. chinense (pimenta cv. Habañero), que após a formação dos espermogônios (11 dias), apresentou manchas necróticas na região periférica aos espermogônios, aos 15 dias após a inoculação, não havendo evolução da infecção. Também foi observada reação de hipersensibilidade, de forma mais moderada em folhas C. annuum (pimenta serrano) e C. baccatum (chapéu-de-frade). Com relação às outras solanáceas inoculadas (jiló e berinjela) não foram observados os sintomas e sinais da infecção.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Nowadays generation ethanol second, that t is obtained from fermentation of sugars of hydrolyses of cellulose, is gaining attention worldwide as a viable alternative to petroleum mainly for being a renewable resource. The increase of first generation ethanol production i.e. that obtained from sugar-cane molasses could lead to a reduction of lands sustainable for crops and food production. However, second generation ethanol needs technologic pathway for reduce the bottlenecks as production of enzymes to hydrolysis the cellulose to glucose i.e. the cellulases as well as the development of efficient biomass pretreatment and of low-cost. In this work Trichoderma reesei ATCC 2768 was cultivated under submerged fermentation to produce cellulases using as substrates waste of lignocellulosic material such as cashew apple bagasse as well as coconut bagasse with and without pretreatment. For pretreatment the bagasses were treated with 1 M NaOH and by explosion at high pressure. Enzyme production was carried out in shaker (temperature of 27ºC, 150 rpm and initial medium pH of 4.8). Results showed that T.reesei ATCC 2768 showed the higher cellulase production when the cashew apple bagasse was treated with 1M NaOH (2.160 UI/mL of CMCase and 0.215 UI/mL of FPase), in which the conversion of cellulose, in terms of total reducing sugars, was of 98.38%, when compared to pretreatment by explosion at high pressure (0.853 UI/mL of CMCase and 0.172 UI/mL of Fpase) showing a conversion of 47.39% of total reducing sugars. Cellulase production is lower for the medium containing coconut bagasse treated with 1M NaOH (0.480 UI/mL of CMcase and 0.073 UI/mL of FPase), giving a conversion of 49.5% in terms of total reducing sugars. Cashew apple bagasse without pretreatment showed cellulase activities lower (0.535 UI/mL of CMCase and 0,152 UI/mL of FPase) then pretreated bagasse while the coconut bagasse without pretreatment did not show any enzymatic activity. Maximum cell concentration was obtained using cashew nut bagasse as well as coconut shell bagasse treated with 1M NaOH, with 2.92 g/L and 1.97 g/L, respectively. These were higher than for the experiments in which the substrates were treated by explosion at high pressure, 1.93 g/L and 1.17 g/L. Cashew apple is a potential inducer for cellulolytic enzymes synthysis showing better results than coconut bagasse. Pretreatment improves the process for the cellulolytic enzyme production

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study evaluates the biosurfactants production from cassava wastewater, an agro industrial residue, to be used as carbon source. Using a factorial design 24-1 (half fraction), 10 tests were performed using Pseudomonas aeruginosa AP029/GVII-A in submerged batch cultivation in rotating incubator (shaker). The influence of factors (temperature, agitation, aeration ratio and concentration of cultivation medium) at two different levels for the synthesis of the biosurfactant. Samples were collected throughout the cultivation by 132 hours of fermentation were completed. The best outcome was intended by following production through substrate consumption, dry matter, reduction of surface tension (ring method) and emulsification index. The kinetics of microorganism was assessed for the carbon source used. The results showed that the cassava wastewater is a well assimilable substrate for the production of biotensoactive, reaching 91 % of consumption by the micro-organism under study. The growth temperature was found to be one of the leading factors in the synthesis of the metabolite, followed by aeration and also due to the agitation. The best results showed a 30 % reduction in surface tension (% RTS) for the environment, reaching values of 30 mN/m; 3.0 g /L of biomass and emulsifying index greater than 65 %. The metabolite synthesized still remained stable for different salt concentrations (1, 5 and 10 % w/ v) and alkaline pH (8-10).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Although the good performance in organic matter and suspended solids removal, the anaerobic reactors are unable to remove ammonia nitrogen from sewage, which makes indispensable to include a step of post-treatment for removal of ammonia or nitrate as necessary. This paper presents the performance of a new variant technology, where the nitrification unit, preceded by anaerobic units, is a submerged aerated biological filter, without continuous sludge discharge in their daily operation. The oxygenation system is very simple and inexpensive, consisting of perforated hoses and compressors. The anaerobic reactors are a septic tank with two chambers followed (8.82 m³) and two parallel anaerobic filters (36 m³ each) filled with ceramic bricks and conics plastic parts. Both followed aerated filters were filled with cut corrugated conduit. The study evaluated the behavior of the system with constant domestic sewage flow (10 m³/d) and different aeration conditions, are these: stage 01, when applied air flow of 0.01 m³ air/min in both aerated filter; stage 02, remained in the initial air flow rate in the second aerated filter and increased at the first to 0.05 m³ air/min; at last, at last, in stage 03, the air flow rate of first aerated filter was 0.10 m³ air/min and on the second remained at 0.01 m³ air/min. The filter FA1 received load of 0.41 kg COD/m³.d, 0.37 kg COD/m³.d and 0.26 kg COD/m³.d on phases 01, 02 and 03, respectively. The FA2 received loads of 0.25 kg COD/m³.d, 0.18 kg COD/m³.d and 0.14 kg COD/m³.d on phases 01, 02 and 03, respectively. During stage 01, were found the following results: 98% removals of BODtotal and 92% of CODtotal, with effluent presenting 9 mg/L of BODtotal final average and 53 mg/L of CODtotal average; suspended solids removals of 93%, with a mean concentration of 10 mg/L in the final effluent; 47% reduction of ammonia of FA2 to FAN 's, presenting average of 28 mg NNH3/ L of ammonia in the effluent with; the dissolved oxygen levels always remained around 2.0 mg/L. During stage 02, were found removals of 97% and 95% to BODtotal and suspended solids, respectively, with average final concentrations of 8 and 7 mg/L, respectively; was removed 60% of ammonia, whose final concentration was 16.3 mg NNH3/ L, and nitrate was increased to a final average concentration of 16.55 mg N-NO3/L. Finally, the stage 03 provided 6 mg/L of DBOtotal (98% removal) and 23 mg/L of CODtotal (95% removal) of final effluent concentrations average. At this stage was identified the higher ammonia oxidation (86%), with final effluent showing average concentration of 6.1 mg N-NH3/L, reaching a minimum of 1.70 mg N-NH3/L. In some moments, during stage 03, there was a moderate denitrification process in the last aerated filter. The average turbidity in the effluent showed around 1.5 NTU, proving the good biomass physical stability. Therefore, the results demonstrate the submerged biological filters potential, filled with high void ratio material (98%), and aerated with hoses and compressor adoption, in the carbonaceous and nitrogenous matter oxidation, also generating an effluent with low concentration of solids

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study aimed to verify the prevalence of lip and perioral lesions in worker who were under sunshine on the beaches of Natal/RN and to investigate possible associations of these with sociodemographic, occupational and general health variables. For this, 362 individuals who had one of the urban beaches (Ponta Negra / Environment / Redinha) in the city of Natal/RN as a working environment in the study. We excluded people under 18 years old. Data collection was done through epidemiological analysis and extra-oral validated questionnaire with questions that characterize socioeconomic and demographic factors, occupational exposure and general health. The male subjects (72.6%) were the majority in the sample. The people who worked directly exposed to high peaks of ultraviolet radiation, as well as informal workers predominated. Considering the total sample of individuals, ephelides in the perioral region (33.7%) and labial region (24.0%), solar lentigo perioral (15.2%) and actinic cheilitis (13.8%) stood out as the most prevalent lesions. Indoor workers and those who had a habit occurrence of injuries by 19% and 21% respectively higher when compared to outdoor workers and people without habits. The variable use of cap / hat was associated with the presence of cold sores (Qui2 = 1,328, p = 0,058). On the threshold of significance, the type of work was also associated with lesions in lip occurrence (p = 0,042). Men showed a lower incidence of perioral lesions when compared to female workers (PR=0,716, p valor = 0,002). The present study showed high prevalence of lip and perioral lesions. The premalignant lesions were the most identified, both as in lip skin. It is important therefore to be encouraged to adopt protective measures against excessive sun exposure, fairly and consistently

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This dissertation the results of a research developed in the area of São Bento do Norte and Caiçara do Norte, northern coast of the State of Rio Grande do Norte, during the period of June of 2000 to August of 2001, in the ambit of the projects MAMBMARÉ (CNPq/CTPETRO) and PROBRAL (CAPES/DAAD). The objective principal of this research was the characterization of the sedimentary dynamics of this coast, with base in data of coastal process (winds, currents, waves and tides), with topographical risings (beach profiles and dunes), satellite images and sedimentary analyses. The more specific objectives were accomplished the coastal monitoring of this coast, to verify the maintenance of an erosive tendency or progradacional after the groynes construction for contention of the erosion in the beach of Caiçara do Norte, as well as to verify the influence of the features of bottom of the platform interns adjacent on the pole petroliferous of Guamaré. The executed monitoramento allowed to identify that the movement of the sediments, along the year, in that area, is cyclical, reaching the largest oscillations during the months of winter (deposition) and they will summer (erosion). The sedimentologic studies indicated a general tendency for sands quartzosas, with gravel presence, moderately to good selected, with asymmetry predominantly negative. In agreement with the parameter of Dean (1957), used in the identification of the state morfodinâmico of the beaches, monitored beaches, are basically reflectivas with tendency to middlemen, what frames that space of the coast norte-riograndense, as a space strongly vulnerable to erosive processes. The studies developed in the platform, it interns of this area, allowed to visualize for the first time, in large scale, the distribution of the features of the submarine bottom to the batométrico coat of 25 meters. Being pointed out the presence of a high one topographical submerged, with about 5 meters of height, 1 km of width and more than 24 meters of extension, located in the platform it interns in front of São Bento do Norte; coincident with the trend of the system of flaws of Carnaubais. This feature relay an important paper on the control of the sedimentary processes and oceanographic, as well as in the coastal evolution of this area of the RN state, and they affect the area of the pole petroliferous of Guamaré directly. These results contribute to a better knowledge of the processes in the area, and consequently as subsidies implantation of measures of coastal and environmental protection for the cities of São Bento do Norte and Caiçara do Norte, as well as to understand how the geological-sedimentary processes and oceanographic, in this area, are influencing the characteristics geoambientais of the pole petroliferous of Guamaré

Relevância:

10.00% 10.00%

Publicador:

Resumo:

On the modern Continental Shelf to the north of Rio Grande do Norte state (NE Brazil) is located a paleo-valley, submerged during the last glacial sea-level lowstand, that marks continuation of the most important river of this area (Açu River). Despite the high level of exploration activity of oil industry, there is few information about shallow stratigraphy. Aiming to fill this gap, situated on the Neogene, was worked a marine seismic investigation, the development of a processing flow for high resolution data seismic, and the recognition of the main feature morphology of the study area: the incised valley of the River Açu. The acquisition of shallow seismic data was undertaken in conjunction with the laboratory of Marine Geology/Geophysics and Environmental Monitoring - GGEMMA of Federal University of Rio Grande do Norte UFRN, in SISPLAT project, where the geomorphological structure of the Rio paleovale Açu was the target of the investigation survey. The acquisition of geophysical data has been over the longitudinal and transverse sections, which were subsequently submitted to the processing, hitherto little-used and / or few addressed in the literature, which provided a much higher quality result with the raw data. Once proposed for the flow data was developed and applied to the data of X-Star (acoustic sensor), using available resources of the program ReflexW 4.5 A surface fluvial architecture has been constructed from the bathymetric data and remote sensing image fused and draped over Digital Elevation Models to create three-dimensional (3D) perspective views that are used to analyze the 3D geometry geological features and provide the mapping morphologically defined. The results are expressed in the analysis of seismic sections that extend over the region of the continental shelf and upper slope from mouth of the Açu River to the shelf edge, providing the identification / quantification of geometrical features such as depth, thickness, horizons and units seismic stratigraphyc area, with emphasis has been placed on the palaeoenvironmental interpretation of discordance limit and fill sediment of the incised valley, control by structural elements, and marked by the influence of changes in the sea level. The interpretation of the evolution of this river is worth can bring information to enable more precise descriptions and interpretations, which describes the palaeoenvironmental controls influencing incised valley evolution and preservation to provide a better comprehensive understanding of this reservoir analog system

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This dissertation the results of a research developed in the area of São Bento do Norte and Caiçara do Norte, northern coast of the State of Rio Grande do Norte, during the period of June of 2000 to August of 2001, in the ambit of the projects MAMBMARÉ (CNPq/CTPETRO) and PROBRAL (CAPES/DAAD).The objective principal of this research was the characterization of the sedimentary dynamics of this coast, with base in data of coastal process (winds, currents, waves and tides), with topographical risings (beach profiles and dunes), satellite images and sedimentary analyses. The more specific objectives were accomplished the coastal monitoring of this coast, to verify the maintenance of an erosive tendency or progradacional after the groynes construction for contention of the erosion in the beach of Caiçara do Norte, as well as to verify the influence of the features of bottom of the platform interns adjacent on the pole petroliferous of Guamaré. The executed monitoramento allowed to identify that the movement of the sediments, along the year, in that area, is cyclical, reaching the largest oscillations during the months of winter (deposition) and they will summer (erosion). The sedimentologic studies indicated a general tendency for sands quartzosas, with gravel presence, moderately to good selected, with asymmetry predominantly negative. In agreement with the parameter of Dean (1957), used in the identification of the state morfodinâmico of the beaches, monitored beaches, are basically reflectivas with tendency to middlemen, what frames that space of the coast norteriograndense, as a space strongly vulnerable to erosive processes. The studies developed in the platform, it interns of this area, allowed to visualize for the first time, in large scale, the distribution of the features of the submarine bottom to the batométrico coat of 25 meters. Being pointed out the presence of a high one topographical submerged, with about 5 meters of height, 1 km of width and more than 24 meters of extension, located in the platform it interns in front of São Bento do Norte; coincident with the trend of the system of flaws of Carnaubais. This feature relay an important paper on the control of the sedimentary processes and oceanographic, as well as in the coastal evolution of this area of the RN state, and they affect the area of the pole petroliferous of Guamaré directly. These results contribute to a better knowledge of the processes in the area, and consequently as subsidies implantation of measures of coastal and environmental protection for the cities of São Bento do Norte and Caiçara do Norte, as well as to understand how the geological-sedimentary processes and oceanographic, in this area, are influencing the characteristics geoambientais of the pole petroliferous of Guamaré

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The brazilian marginal basins have a huge potential to generate and accumulate petroleum. Incised valleys which are eroded in response to a fall of relative sea level are related to potential reservoir as well, modern drowned-valley estuaries serve as harbors to petroleum and salt industries, fisheries, waste-disposal sites and recreational areas for a significant fraction of the world s population. The combined influence of these factors has produced a dramatic increase in research on modern and ancient incised-valley systems. This research is one expression of this interest. The integrated use of satellites images and high resolution seismic (bathymetry, sides scan sonar) was used on the Apodi River mouth-RN to characterizes the continental shelf This area is located at the Potiguar Basin in the NE Brazilian Equatorial Atlantic margin. Through bathymetric and side scan sonar data processing, a digital Terrain Model was developed, and a detailed geomorphologic analysis was performed. In this way was possible to recognize the geomorphologic framework and differents sismofacies, which may influence this area. A channel extending from the ApodiMossoró river mouth to the shelf edge dominates the investigated area. This structure can be correlated with the former river valley developed during the late Pleistocene sea level fall. This channel has two main directions (NW-SE and NE-SW) probably controlled by the Potiguar Basin structures. The western margin of the channel is relatively steep and pronounced whereas the eastern margin consists only of a gentle slope. Longitudinal bedforms and massive ridges also occur. The first are formed doe to the shelf sediment rework and the reef-like structures probably are relics of submerged beachrock-lines indicating past shoreline positions during the deglacial sea-level rise. The sub-bottom seismic data allow the identification of different sismic patterns and a marcant discontinuity, interpreted as the Upper