Pré-tratamento e hidrólise da casca de uva para liberação de açúcares fermentescíveis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Atividade antibacteriana de óleo essencial de orégano (Origanum vulgare): ações in vitro e in situ para preservação de alimento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Otimização da inativação fotodinâmica de E. coli por fotossensibilizadores veiculados por nanopartículas de sílica

A nanotecnologia tem sido aplicada para o desenvolvimento de materiais para diversas aplicações inclusive na inativação de patógenos. As nanopartículas de sílica (npSi) destacam-se pela alta área superficial, facilidade na alteração da superfície para aumento da eficiência adsortiva, penetrabilidade e toxicidade para bactérias gram-negativas sendo biocompatíveis para células de mamíferos e mais foto-estáveis que a maioria dos compostos orgânicos. Devido as suas vantagens, as npSi podem ser usadas para veicular fotossensibilizadores (FSs) uma vez que permitem sua utilização em solução aquosa em que os FSs geralmente são insolúveis. Além disso, o uso de FSs em vez de antibióticos, permite a inativação microbiológica pela Terapia Fotodinâmica sem que as bactérias adquiram resistência por mecanismos genéticos. Esse processo ocorre pela interação entre um FS, luz e oxigênio molecular produzindo oxigênio singleto que é extremamente reativo danificando estruturas celulares. O objetivo desse estudo foi otimizar a fotoinativação dinâmica de E .coli utilizando Azul de Metileno (AM) e Azul de Toluidina O (ATO) veiculados por npSi. As npSi foram preparadas pela metodologia sol-gel, caracterizadas por microscopia eletrônica de varredura (MEV) e submetidas à adsorção de AM e ATO em sua superfície. A presença de AM e ATO na superfície das npSi foram analisadas por espectroscopia no infravermelho; espectroscopia de fluorescência por raio-X e análise termogravimétrica. O planejamento experimental, iniciado pelo fatorial 23 e modelado ao composto central em busca das condições ótimas foi adotado pela primeira vez nessa aplicabilidade, visando a fotoinativação de E. coli empregando AM e ATO em solução e em seguida com npSi. AM e ATO veiculados por npSi permitem a fotoinativação em concentrações mais baixas de FS (20 e 51% respectivamente), causando desestruturação da integridade bacteriana demonstrada por MEV. Os resultados sugerem que a veiculação de AM e ATO por npSi é extremamente efetiva para a fotoinativação dinâmica de E. coli e que o planejamento composto central pode levar à completa inativação das bactérias.

Extração, determinação da composição fenólica e avaliação do potencial de desativação de espécies reativas de oxigênio e da atividade anti-inflamatória de resíduos de amendoim, pimenta-rosa e pimenta-do-reino

O setor agroindustrial tem se expandido muito nos últimos anos, levando o país a um aumento na geração de resíduos agroindustriais, sendo que a maior parte deles ainda é descartada no meio ambiente, sem tratamento adequado, ou utilizada na alimentação animal, destinos que a priori, não geram ganhos econômicos para a agroindústria além de representarem gargalos logísticos e ambientais na sua disposição. Nesse sentido, o presente trabalho teve como objetivos otimizar o processo de extração de compostos bioativos, avaliar in vitro as atividades antioxidante, por meio da desativação de espécies reativas de oxigênio, e anti-inflamatória, bem como determinar a composição fenólica dos resíduos agroindustriais a saber: película de amendoim (Arachis hypogaea) (cultivares IAC886 e IAC505), pimenta-rosa (Schinus terebinthifolius Raddi) e pimenta-do-reino (Piper Nigrum L). O processo de otimização da extração de compostos antioxidantes foi realizado utilizando dois processos de extração, extração convencional e subcrítica, em delineamento composto central rotacional, utilizando como variáveis a temperatura e tempo e a pressão e temperatura, respectivamente, com os solventes etanol 80%, água e propilenoglicol 80%. Durante o processo de otimização a atividade antioxidante foi avaliada pelo método de sequestro do radical ABTS. Os melhores resultados foram obtidos para a extração convencional com os solventes etanol 80%, água e propilenoglicol 80%. A película de amendoim (IAC505) apresentou as maiores atividades antioxidantes (1.396,67, 580,44 e 859,89 μmol.g-1 em equivalentes de trolox, para os solventes etanol 80%, água e propilenoglicol 80%, respectivamente). A partir dos resultados obtidos para os solventes testados, utilizando a extração convencional, foram feitas outras análises de atividade antioxidante considerando o tempo e temperatura ideal de extração. Foram realizadas análises de avaliação da capacidade de redução de Folin-Ciocalteau e potencial de desativação dos radicais livres sintéticos (DPPH e ABTS) e espécies reativas de oxigênio (radicais peroxila, superóxido e ácido hipocloroso). O solvente de extração que apresentou melhores resultados em todos os ensaios foi o etanol 80%, sendo, portanto o solvente utilizado nas análises subsequentes. A partir da definição do melhor sistema extrator foram realizadas análises da composição fenólica, por meio das técnicas de cromatografia líquida de alta eficiência em modo analítico (HPLC-RP), cromatografia gasosa acoplada com espectrometria de massas (GC-MS), e avaliação in vitro da atividade anti-inflamatória. Foram identificados nos resíduos estudados procianidinas B1 e B2, ácido p-cumárico, miricetina, ácido ferúlico, ácido siríngico, ácido sinápico, epicatequina e catequina. A pimenta-do-reino diminui significativamente os níveis de TNF-α e nitritos, reduzindo assim o processo inflamatório gerado. Os resultados obtidos neste trabalho demonstram que estes resíduos agroindústrias possuem grande potencial biológico, podendo assim ser melhores aproveitados tanto pela indústria de alimentos quanto pela indústria farmacêutica.

Estudo da cinética de crescimento de células de inseto Sf21 e infecção por baculovírus Anticarsia gemmatalis (AgMNPV) para a produção de bioinseticida.

O interesse em estudar o cultivo das células de inseto está relacionado entre outros usos a sua utilização na produção de biopesticidas. Há muitos anos os pesticidas químicos vêm contribuindo no controle de pragas na agricultura. Entretanto, o uso desses compostos prolongadamente tem resultado na seleção de insetos resistentes e em poluição ambiental. Diante disso, torna-se necessário o desenvolvimento e aprimoramento dos bioinseticidas. No Brasil, o baculovírus Anticarsia gemmatalis multiple nucleopolyhedrovirus (AgMNPV) foi o principal agente de controle biológico da praga da soja Anticarsia gemmatalis. Assim, estudos que viabilizem a produção desses vírus in vitro possibilitariam uma produção mais controlada e de melhor qualidade desses biopesticidas. Neste trabalho, investigou-se a suscetibilidade à infecção por AgMNPV de diferentes linhagens celulares de Sf21 e o crescimento dessas células em diferentes sistemas: cultivos em schotts, em spinner e em biorreator, variando-se a idade do inóculo (IA) e a concentração celular inicial (X0). Constatou-se variação no perfil de infecção das linhagens, sendo as linhagens mais adequadas para a produção de bioinseticida as linhagens de Sf21 denominadas EMBRAPA, UFRN e GibcoG, uma vez que estas apresentaram mais do que 40 % das células com poliedros em cultivos em suspensão, enquanto a linhagem denominada GibcoSF teve menos de 2 % das células infectadas com poliedros. Ao se estudar o efeito do número de subcultivos na morfologia e crescimento celular, foi averiguado um aumento no diâmetro de 10 % e no volume de 26 % das células UFRN em relação às células GibcoSF. Além disso, o crescimento das células UFRN foi 49% menor do que das células GibcoSF. Quando realizado o Delineamento Composto Central Rotacional (DCCR) para se analisar o efeito da IA e a X0 na taxa de crescimento específica máxima (?max) e na concentração celular máxima (Xvmax) em cultivos em schott com células UFRN, obteve-se um modelo empírico. Quando analisadas as variáveis IA e X0 separadamente, não foram encontradas diferenças significativas para as respostas Xvmax e ?max em relação a X0. Para a IA, entretanto, obteve-se os resultados mais satisfatórios para os inóculos com IA de 72 e 96 horas: Xvmax de 5,97.106 cel/mL e 5,99.106 cel/mL, e ?max de 0,70 dia-1 e 0,63 dia-1, respectivamente. Nos cultivos em spinner com células UFRN, foi observada a formação de grumos, o que levou a Xvmax de 2,00.106 cel/mL. No cultivo em biorreator com células UFRN, foi obtido um Xvmax de 6,21.106 cel/mL, ?max de 0,70 dia-1, Qo2 na fase exponencial de 67,3 ± 3,6 .10-18 molO2/cel/s, rendimento de glicose em célula igual a 1,0.109 cel/g de glicose e um rendimento de glutamina em células de 3,0.109 cel/mL. Comprovou-se, portanto, a existência de alterações na infecção entre diferentes linhagens de Sf21; a importância do estado fisiológico da célula nos subcultivos, a ocorrência de mudanças no crescimento celular de acordo com os sistemas de cultivo e o efeito do número de subcultivos na morfologia e crescimento de células Sf21.

Determination of cyclic and linear siloxanes in wastewater samples by ultrasound-assisted dispersive liquid-liquid microextraction followed by gas chromatography-mass spectrometry

A fast, simple and environmentally friendly ultrasound-assisted dispersive liquid-liquid microextraction (USA-DLLME) procedure has been developed to preconcentrate eight cyclic and linear siloxanes from wastewater samples prior to quantification by gas chromatography-mass spectrometry (GC-MS). A two-stage multivariate optimization approach has been developed employing a Plackett-Burman design for screening and selecting the significant factors involved in the USA-DLLME procedure, which was later optimized by means of a circumscribed central composite design. The optimum conditions were: extractant solvent volume, 13 µL; solvent type, chlorobenzene; sample volume, 13 mL; centrifugation speed, 2300 rpm; centrifugation time, 5 min; and sonication time, 2 min. Under the optimized experimental conditions the method gave levels of repeatability with coefficients of variation between 10 and 24% (n=7). Limits of detection were between 0.002 and 1.4 µg L−1. Calculated calibration curves gave high levels of linearity with correlation coefficient values between 0.991 and 0.9997. Finally, the proposed method was applied for the analysis of wastewater samples. Relative recovery values ranged between 71–116% showing that the matrix had a negligible effect upon extraction. To our knowledge, this is the first time that combines LLME and GC-MS for the analysis of methylsiloxanes in wastewater samples.

Tungsten coil atomic emission spectrometry combined with dispersive liquid–liquid microextraction: A synergistic association for chromium determination in water samples

A novel and environment friendly analytical method is reported for total chromium determination and chromium speciation in water samples, whereby tungsten coil atomic emission spectrometry (WCAES) is combined with in situ ionic liquid formation dispersive liquid–liquid microextraction (in situ IL-DLLME). A two stage multivariate optimization approach has been developed employing a Plackett–Burman design for screening and selection of the significant factor involved in the in situ IL-DLLME procedure, which was later optimized by means of a circumscribed central composite design. The optimum conditions were complexant concentration: 0.5% (or 0.1%); complexant type: DDTC; IL anion: View the MathML sourcePF6−; [Hmim][Cl] IL amount: 60 mg; ionic strength: 0% NaCl; pH: 5 (or 2); centrifugation time: 10 min; and centrifugation speed: 1000 rpm. Under the optimized experimental conditions the method was evaluated and proper linearity was obtained with a correlation coefficient of 0.991 (5 calibration standards). Limits of detection and quantification for both chromium species were 3 and 10 µg L−1, respectively. This is a 233-fold improvement when compared with chromium determination by WCAES without using preconcentration. The repeatability of the proposed method was evaluated at two different spiking levels (10 and 50 µg L−1) obtaining coefficients of variation of 11.4% and 3.6% (n=3), respectively. A certified reference material (SRM-1643e NIST) was analyzed in order to determine the accuracy of the method for total chromium determination and 112.3% and 2.5 µg L−1 were the recovery (trueness) and standard deviation values, respectively. Tap, bottled mineral and natural mineral water samples were analyzed at 60 µg L−1 spiking level of total Cr content at two Cr(VI)/Cr(III) ratios, and relative recovery values ranged between 88% and 112% showing that the matrix has a negligible effect. To our knowledge, this is the first time that combines in situ IL-DLLME and WCAES.

Optimization of integrated chemical-biological degradation of a reactive azo dye using response surface methodology

The integrated chemical-biological degradation combining advanced oxidation by UV/H2O2 followed by aerobic biodegradation was used to degrade C.I. Reactive Azo Red 195A, commonly used in the textile industry in Australia. An experimental design based on the response surface method was applied to evaluate the interactive effects of influencing factors (UV irradiation time, initial hydrogen peroxide dosage and recirculation ratio of the system) on decolourisation efficiency and optimizing the operating conditions of the treatment process. The effects were determined by the measurement of dye concentration and soluble chemical oxygen demand (S-COD). The results showed that the dye and S-COD removal were affected by all factors individually and interactively. Maximal colour degradation performance was predicted, and experimentally validated, with no recirculation, 30 min UV irradiation and 500 mg H2O2/L. The model predictions for colour removal, based on a three-factor/five-level Box-Wilson central composite design and the response surface method analysis, were found to be very close to additional experimental results obtained under near optimal conditions. This demonstrates the benefits of this approach in achieving good predictions while minimising the number of experiments required. (c) 2006 Elsevier B.V. All rights reserved.

Synchronized and controlled release of metformin hydrochloride/glipizide from elementary osmotic delivery

The combination of metformin hydrochloride (MTF) and glipizide (GLZ) is second-line medication for diabetes mellitus type 2 (DMT2). In the present study, elementary osmotic pump(EOP)tablet is designed to deliver the combination of MTF and GLZ in a sustained and synchronized manner. By analyzing different variables of the formulation, sodium hydrogen carbonate is introduced as pH modifier to improve the release of GLZ, while ethyl cellulose acts as release retardant to reduce the burst release phase of MTF. A two factor, three level face-centered central composite design (FCCD) is applied to investigate the impact of different factors on drug release profile. Compared with conventional tablets, the elementary osmotic pump (EOP) tablet demonstrates a controlled release behavior with relative bioavailability of 99.2% for MTF and 99.3% for GLZ. Data also shows EOP tablet is able to release MTF and GLZ in a synchronized and sustained manner both in vitro and in vivo

Toxic metal recovery from spent hydroprocessing catalyst

Spent hydroprocessing catalysts (HPCs) are solid wastes generated in refinery industries and typically contain various hazardous metals, such as Co, Ni, and Mo. These wastes cannot be discharged into the environment due to strict regulations and require proper treatment to remove the hazardous substances. Various options have been proposed and developed for spent catalysts treatment; however, hydrometallurgical processes are considered efficient, cost-effective and environmentally-friendly methods of metal extraction, and have been widely employed for different metal uptake from aqueous leachates of secondary materials. Although there are a large number of studies on hazardous metal extraction from aqueous solutions of various spent catalysts, little information is available on Co, Ni, and Mo removal from spent NiMo hydroprocessing catalysts. In the current study, a solvent extraction process was applied to the spent HPC to specifically remove Co, Ni, and Mo. The spent HPC is dissolved in an acid solution and then the metals are extracted using three different extractants, two of which were aminebased and one which was a quaternary ammonium salt. The main aim of this study was to develop a hydrometallurgical method to remove, and ultimately be able to recover, Co, Ni, and Mo from the spent HPCs produced at the petrochemical plant in Come By Chance, Newfoundland and Labrador. The specific objectives of the study were: (1) characterization of the spent catalyst and the acidic leachate, (2) identifying the most efficient leaching agent to dissolve the metals from the spent catalyst; (3) development of a solvent extraction procedure using the amine-based extractants Alamine308, Alamine336 and the quaternary ammonium salt, Aliquat336 in toluene to remove Co, Ni, and Mo from the spent catalyst; (4) selection of the best reagent for Co, Ni, and Mo extraction based on the required contact time, required extractant concentration, as well as organic:aqueous ratio; and (5) evaluation of the extraction conditions and optimization of the metal extraction process using the Design Expert® software. For the present study, a Central Composite Design (CCD) method was applied as the main method to design the experiments, evaluate the effect of each parameter, provide a statistical model, and optimize the extraction process. Three parameters were considered as the most significant factors affecting the process efficiency: (i) extractant concentration, (ii) the organic:aqueous ratio, and (iii) contact time. Metal extraction efficiencies were calculated based on ICP analysis of the pre- and post–leachates, and the process optimization was conducted with the aid of the Design Expert® software. The obtained results showed that Alamine308 can be considered to be the most effective and suitable extractant for spent HPC examined in the study. Alamine308 is capable of removing all three metals to the maximum amounts. Aliquat336 was found to be not as effective, especially for Ni extraction; however, it is able to separate all of these metals within the first 10 min, unlike Alamine336, which required more than 35 min to do so. Based on the results of this study, a cost-effective and environmentally-friendly solventextraction process was achieved to remove Co, Ni, and Mo from the spent HPCs in a short amount of time and with the low extractant concentration required. This method can be tested and implemented for other hazardous metals from other secondary materials as well. Further investigation may be required; however, the results of this study can be a guide for future research on similar metal extraction processes.

Produção de nanopartículas contendo peptídeos bioativos de microalgas

A produção de peptídeos bioativos de distintas fontes de proteínas vem ganhando espaço na produção científica e tecnológica, despertando interesse do setor empresarial. Paralelamente a isso, devido à elevada concentração de proteínas na biomassa das microalgas Spirulina e Chlorella, estas apresentam grande potencial para a extração de biocompostos com alto valor agregado, como biopeptídeos de microalgas. As proteínas são uma importante fonte de peptídeos bioativos, mas estes não estão ativos na proteína precursora e devem ser liberados para que apresentem efeitos fisiológicos desejados. Essa liberação pode ser feita através de hidrólise enzimática a partir de proteases, sendo um dos métodos mais utilizados para a produção destes biocompostos. Dentro deste contexto, vários estudos vêm mostrando o uso da tecnologia por secagem em spray dryer para a obtenção de nanopartículas que contenham compostos bioativos, sendo, essa técnica, amplamente utilizada para transformar líquidos em pós, podendo ser aplicada em materiais sensíveis à temperatura. Este estudo teve como objetivo obter peptídeos bioativos através da reação enzimática, tendo como substrato a biomassa de Spirulina sp. LEB 18 e Chlorella pyrenoidosa e, na sequência, obter nanopartículas contendo os biopeptídeos. Primeiramente, foram testadas as 3 proteases comerciais (Protemax 580 L, Protemax N 200 e pepsina) para a produção de hidrolisados proteicos de microalgas, para isso foram realizados 3 delineamentos compostos centrais para cada microalga em estudo (Chlorella e Spirulina). Os delineamentos utilizados foram do tipo 23 com três repetições no ponto central, variando-se a concentração de enzima (5 a 10 U.mL-1), a concentração de substrato (5 a 10 %) e o tempo de reação (60 a 240 min). Após, realizou-se 2 delineamentos compostos rotacionais do tipo 22 com pontos centrais, um para cada microalga, utilizando-se para a hidrólise a enzima Protemax 580L (5 U.mL-1) variando-se a concentração de substrato e tempo de reação, para todos ensaios estudou-se a solubilidade, capacidade de retenção de água, atividade antioxidante e digestibilidade. Foi selecionado um ensaio para cada microalga, levando em conta os melhores resultados. Então nova hidrólise enzimática foi realizada sendo o sistema reacional composto pela enzima Protemax 580 L (5 U.mL-1) e pela biomassa de Spirulina sp. LEB 18 ou Chlorella pyrenoidosa (4% de proteína) durante tempo de 200 min. Os hidrolisados foram purificados por filtração a vácuo com membranas millipores de diferentes tamanhos (0,45; 0,2 e 0,1 µm) e por colunas com membrana vertical Amicon® Ultra 0.5 (3K e 10K), sendo que após cada etapa, foi realizado teste de atividade antioxidante pelos métodos de poder redutor, DPPH e ABTS, a fim de verificar a permanência da atividade antioxidante. Utilizou-se nano spray dryer Büchi modelo B 90 para a secagem das amostras, sendo o tamanho das partículas obtidas analisados por microscopia eletrônica de varredura (MEV). Por fim, conclui-se que a biomassa de microalgas pode ser utilizada como fonte de produção de peptídeos bioativos com elevada atividade antioxidante e que dentre as microalgas estudadas, Spirulina sp. LEB 18 apresentou melhores resultados, em todas as análises realizadas, quando comparada com Chlorella pyrenoidosa. Esse estudo, também visou utilizar a nanobiotecnologia para obtenção de nanoparículas contendo os biopeptídeos, para tal, utilizou-se o nano Buchi Spray Dryer B-90, o qual gerou partículas nanométricas de 14 a 18 nm para o hidrolisado de Spirulina e de 72 a 108 nm para o hidrolisado de Chlorella.

Bioconversion of agro-industrial wastes for the production of fibrinolytic enzyme from Bacillus halodurans IND18: Purification and biochemical characterization

Background: Agro-wastes were used for the production of fibrinolytic enzyme in solid-state fermentation. The process parameters were optimized to enhance the production of fibrinolytic enzyme from Bacillus halodurans IND18 by statistical approach. The fibrinolytic enzyme was purified, and the properties were studied. Results: A two-level full factorial design was used to screen the significant factors. The factors such as moisture, pH, and peptone were significantly affected enzyme production and these three factors were selected for further optimization using central composite design. The optimum medium for fibrinolytic enzyme production was wheat bran medium containing 1% peptone and 80% moisture with pH 8.32. Under these optimized conditions, the production of fibrinolytic enzyme was found to be 6851 U/g. The fibrinolytic enzyme was purified by 3.6-fold with 1275 U/mg specific activity. The molecular mass of fibrinolytic enzyme was determined by sodium dodecyl sulphate polyacrylamide gel electrophoresis, and it was observed as 29 kDa. The fibrinolytic enzyme depicted an optimal pH of 9.0 and was stable at a range of pH from 8.0 to 10.0. The optimal temperature was 60°C and was stable up to 50°C. This enzyme activated plasminogen and also degraded the fibrin net of blood clot, which suggested its potential as an effective thrombolytic agent. Conclusions: Wheat bran was found to be an effective substrate for the production of fibrinolytic enzyme. The purified fibrinolytic enzyme degraded fibrin clot. The fibrinolytic enzyme could be useful to make as an effective thrombolytic agent.

Optimization of microwave-assisted extraction of hydrophilic and lipophilic antioxidants from a surplus tomato crop by response surface methodology

Tomato is the second most important vegetable crop worldwide and a rich source of industrially interesting antioxidants. Hence, the microwave-assisted extraction of hydrophilic (H) and lipophilic (L) antioxidants from a surplus tomato crop was optimized using response surface methodology. The relevant independent variables were temperature (T), extraction time (t), ethanol concentration (Et) and solid/liquid ratio (S/L). The concentration-time response methods of crocin and β-carotene bleaching were applied, since they are suitable in vitro assays to evaluate the antioxidant activity of H and L matrices, respectively. The optimum operating conditions that maximized the extraction were as follows: t, 2.25 min; T, 149.2 ºC; Et, 99.1 %; and S/L, 45.0 g/L for H antioxidants; and t, 15.4 min; T, 60.0 ºC; Et, 33.0 %; and S/L, 15.0 g/L for L antioxidants. This industrial approach indicated that surplus tomatoes possess a high content of antioxidants, offering an alternative source for obtaining natural value-added compounds. Additionally, by testing the relationship between the polarity of the extraction solvent and the antioxidant activity of the extracts in H and L media (polarity-activity relationship), useful information for the study of complex natural extracts containing components with variable degrees of polarity was obtained.

Microwave-assisted extraction of phenolic acids and flavonoids and production of antioxidant ingredients from tomato: a nutraceutical-oriented optimization study

The production of natural extracts requires suitable processing conditions to maximize the preservation of the bioactive ingredients. Herein, a microwave-assisted extraction (MAE) process was optimized, by means of response surface methodology (RSM), to maximize the recovery of phenolic acids and flavonoids and obtain antioxidant ingredients from tomato. A 5-level full factorial Box-Behnken design was successfully implemented for MAE optimization, in which the processing time (t), temperature (T), ethanol concentration (Et) and solid/liquid ratio (S/L) were relevant independent variables. The proposed model was validated based on the high values of the adjusted coefficient of determination and on the non-significant differences between experimental and predicted values. The global optimum processing conditions (t=20 min; T=180 ºC; Et=0 %; and S/L=45 g/L) provided tomato extracts with high potential as nutraceuticals or as active ingredients in the design of functional foods. Additionally, the round tomato variety was highlighted as a source of added-value phenolic acids and flavonoids.

Estudo do processo de combustão in-situ em reservatórios maduros de óleos médios e leves (high pressure air injection)

Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves