Uma análise endógena do sistema de defesa civil do estado do Rio de Janeiro no bilênio 2012-2014 sobre a ótica das relações político administrativo

The increase in the number of natural disasters, as well as their social and economic effects, in recent years, has raised a larger collection, by the media, population and control organs, in the members of the Civil Defense system on the reduction of their effects on society, given that the same has been increasingly overwhelming. To this end, the research analyzes the screen because of the Civil Defense system, historically, have focused their actions, programs and public policies on disaster management, i.e. in the response and recovery at the expense of disaster risk management, i.e. on prevention, preparedness and mitigation of the same, given that the same cannot be avoided, but its effects Yes decreased.This arrangement is studied from the literature review, interviews and field visits. Thus, it was found that the resposabilização ratio and Reduction of risk of disasters that the higher the enforcement and accountability greater and consistent are the number of actions, programmes and public policies aimed at prevention, preparedness and mitigation, i.e. for disaster risk reduction management.

Gestão de risco de desastres naturais no Brasil

A presente pesquisa tinha como objetivo compreender como as organizações localizadas em áreas afetadas por desastres naturais atuam para mitigar o risco e qual o papel destas organizações durante o evento. A partir de uma análise documental, o estudo identificou os principais eventos acontecidos no Brasil durante o período de 2003 a 2013 e também as cadeias de suprimentos mais afetadas, bem como os players durante o desastre e os maiores impactos para as atividades econômicas. Os resultados não fornecem indícios que os desastres naturais são considerados na gestão de risco pelas empresas, apesar de serem continuamente afetadas por eles. O poder público, porém, tem aumentado sua preocupação com estes fenômenos

Natural disasters and their impacts on supply chains

This research aimed to understand how Brazilian organizations, located in areas affected by natural disasters were impacted in their operations and the impacts to their whole supply chain. Based on documentary analysis, the study identified the major events that happened in Brazil between 2003 and 2012 and the most affected supply chains, as well as key players during the disaster and the greatest impacts on economic activities. The results suggest that natural disasters are still not considered in the risk management by companies, despite the effects on their activities

Sistema de notificação e extensão da plataforma WISE-MUSE

A integração de sensores em estruturas, máquinas e ambientes, juntamente com uma eficiente recolha e envio de informação, trazem elevados benefícios para as sociedades actuais. Nesse sentido, com a crescente importância que as redes sem fios (WSN) assumem no contexto da qualidade de vida dos indivíduos, principalmente ao nível das comunicações, é fundamental procedermos à exploração das suas diversas potencialidades nos mais variados âmbitos. Deste modo, as WSN podem ser aplicadas em diversas áreas: saúde, monitorização ambiental, segurança de edifícios, indústria, monitorização de tráfego, monitorização de terramotos ou outras catástrofes naturais. Assim surge o projecto WISE-MUSE (Environmental Monitoring based on Wireless Sensor Networks for conservation of artwork and historical archives), que visa a implementação de um conjunto de soluções que permitem a monitorização contínua e automática de parâmetros ambientais (luminosidade, humidade, temperatura e CO2) através de WSN em museus. Este projecto de Mestrado em Engenharia Informática situa-se no âmbito deste projecto WISE-MUSE e tem como intuito: (i) a extensão da plataforma de monitorização de modo a recolher os dados das portas de emergência; (ii) a implementação de um sistema de notificações e alarmes via SMS e E-mail; e (iii) o desenvolvimento da plataforma Web WISE-MUSE, que permita a visualização remota dos dados dos sensores e das portas de uma forma integrada e em tempo real.

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

BMMobile: uma linha de produtos para dimensionamento de bombeio mecânico em dispositivos móveis

With the increase of processing ability, storage and several kinds of communication existing such as Bluetooth, infrared, wireless networks, etc.., mobile devices are no longer only devices with specific function and have become tools with various functionalities. In the business field, the benefits that these kinds of devices can offer are considerable, because the portability allows tasks that previously could only be performed within the work environment, can be performed anywhere. In the context of oil exploration companies, mobile applications allow quick actions could be taken by petroleum engineers and technicians, using their mobile devices to avoid potential catastrophes like an unexpected stop or break of important equipment. In general, the configuration of equipment for oil extraction is performed on the work environment using computer systems in desktop platforms. After the obtained configuration, an employee goes to equipment to be configured and perform the modifications obtained on the use desktop system. This management process equipment for oil extraction takes long time and does not guarantee the maintenance in time to avoid problems. With the use of mobile devices, management and maintenance of equipment for oil extraction can be performed in a more agile time once it enables the engineer or technician oil can perform this configuration at the time and place where the request comes for example, near in the oil well where the equipment is located. The wide variety of mobile devices creates a big difficulty in developing mobile applications, since for one application can function in several types of devices, the application must be changed for each specific type of device, which makes the development quite costly. This paper defines and implements a software product line for designing sucker-rod pumping systems on mobile devices. This product line of software, called BMMobile, aims to produce products that are capable of performing calculations to determine the possible configurations for the equipment in the design suckerrod pumping, and managing the variabilities of the various products that can be generated. Besides, this work performs two evaluations. The first evaluation will verify the consistency of the products produced by the software product line. The second evaluation will verify the reuse of some products generated by SPL developed

Classificador neural híbrido para imagens obtidas por sensoriamento remoto

Remote sensing is one technology of extreme importance, allowing capture of data from the Earth's surface that are used with various purposes, including, environmental monitoring, tracking usage of natural resources, geological prospecting and monitoring of disasters. One of the main applications of remote sensing is the generation of thematic maps and subsequent survey of areas from images generated by orbital or sub-orbital sensors. Pattern classification methods are used in the implementation of computational routines to automate this activity. Artificial neural networks present themselves as viable alternatives to traditional statistical classifiers, mainly for applications whose data show high dimensionality as those from hyperspectral sensors. This work main goal is to develop a classiffier based on neural networks radial basis function and Growing Neural Gas, which presents some advantages over using individual neural networks. The main idea is to use Growing Neural Gas's incremental characteristics to determine the radial basis function network's quantity and choice of centers in order to obtain a highly effective classiffier. To demonstrate the performance of the classiffier three studies case are presented along with the results.

La sociedad de la información en América Latina y el Caribe: desarrollo de las tecnologías y tecnologías para el desarrollo

Incluye Bibliografía

Institucionalidad pública y políticas ambientales explícitas e implícitas

Incluye Bibliografía

Bainha de segurança para acondicionamento de facão canavieiro durante sua vida útil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Proposta de um procedimento metodológico para o estudo de problemas geoambientais com base em banco de dados de eventos atmosféricos severos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Metodologias para reconhecimento de padrões em sistemas SHM utilizando a técnica da Impedância Eletromecânica (E/M)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Biodegradação e avaliação fitotoxicológica do diesel e do biodiesel

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC