Estudo de geopolímeros utilizando cinzas residuais do bagaço de cana-de-açúcar

Pós-graduação em Engenharia Civil - FEIS

Comportamento da cana-de-açúcar em duas safras e atributos físicos do solo, sob diferentes tipos de preparo

The tillage comprises on average 25% of the cost of deploying a reed, so this cost reduction measures are desirable since they do not compromise the quality of the operation and longevity of sugarcane. The objective was to evaluate the effect of different tillage systems in Acrustox, correlating soil physical properties and characteristics of sugarcane agroindustrial plant cane and ratoon cane. We used five types of soil tillage, over experimental design in blocks with five replications. The particle size was measured every 0.1 m to 0.4 m depth, through deformed soil samples collected at the end of the first growth cycle of the culture. For other soil physical properties: bulk density, total porosity and water content, assessments were performed at the end of each cycle, collecting soil samples in layers of 0-0.20 to 0.21-0.40 m, in addition to performing the penetration resistance, using a penetrometer impact. The response of sugarcane depending on the types of tillage was determined from the evaluation of productivity per hectare of stem (TCH), sugar (TPH), the values of pol % cane (AP), sugar total recoverable (ATR) and fiber samples collected at harvest stalk of sugarcane plant and ratoon cane. In the tillage studied, there was a change of the physical attributes of the soil, causing reduced productivity in 2009/2010 crop, compared with the 2008/2009 season. In tillage system of furrowing direct lowest result was observed for TCH, especially in 2009/2010 crop, when the difference with conventional tillage was 20.53 Mg ha(-1).

Análise da viabilidade da utilização da cinza do bagaço de cana-de-açúcar como aglomerante para a produção de matrizes cimentantes

Pós-graduação em Engenharia Civil - FEIS

Uso de algoritmos genéticos na otimização do sistema de coleta do palhiço de cana-de-açúcar

The Brazilian government has convinced the world that ethanol deriving from sugar cane is a promissory means of sustainable fuel for vehicles. There is a great growth of ex vehicles , i.e, run both by ethanol and gasoline, due to competent automotive industries and e cient alcohol production technology. In 2009 and 2010 the ethanol production was 25.7 billion liters and 53.8% of sugar cane production was destined to alcohol production. Nevertheless, the sugar production also derived from sugar cane should increase in 2011. Brazil produced 33 million tons of sugar in the last harvest. With sugar cane on the rise production is arising new environmental problems. The harvest using mechanized cut besides improving the logistic transportation system leaves the generating residue in the eld. This residue is a mixture of straw, leavings and scrap of sugar cane named sugar cane crop residue and corresponds to 30% of biomass and can be burned and produce electricity by cogeneration. But the transport the sugar cane crop from the eld is expensive due costs involved in the transport system. This work aims to propose a formulation for the bales collecting problem from sugar cane eld to mill that minimize the costs involved in the transport system. The computational tests use the C++ language and an algorithm based on genetic algorithms techniques

Concreto com adição de cinza de bagaço de cana-de-açúcar

Pós-graduação em Engenharia Civil - FEIS

Distribuição espacial e dinâmica populacional de Sphenophorus levis (Coleoptera: Curculionidae) em cana-de-açúcar

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Atributos físicos de latossolos cultivados com cana-de-açúcar sob sistemas de usos do solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Identificação de bandas espectrais para detecção de cultura de cana-de-açúcar sadia e doente utilizando câmara hiperespectral embarcada em VANT

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Boro em cana-de-açúcar cultivada em solução nutritiva

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Importância econômica e generalidades para o controle de Telchin licus Drury, 1773 (Lepidoptera: Casttniidae) em cana-de-açúcar

The sugar cane plantation expands its borders each year, throughout the national territory. Thus, increases the amount of biomass that will to be exploited by man in sugar and alcohol produce and also by other organisms, which will have food in abundance. The growth of mechanized harvesting, with the consequent decrease in burning of straw and the expansion of the sucroalcooleiro sector are causing changes into entomofauna in certain areas or regions of sugar cane plantation. One of the new threats to the sugar cane plantations in southcentral region, causing uncertainty and concern to farmers, is the giant worm, Telchin licus, known in Brazil since 1927, in the Northeast of Brazil, is considered a major pest of cane sugar. In 2007 it was first recorded in the state of São Paulo, which accounts for 60% of the country's crops. Whereas until then there is not much information about their management and control, the aim of this review is to gather information on the basis for its control within the context of Integrated Pest Management of cane sugar.

Modelos de previsão de ocorrência de adultos de diatraea saccharalis (Fabricius, 1794) (Lepidoptera: Crambidae) em cana-de-açúcar (Saccharum spp.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Alterações no metabolismo da cana-de-açúcar em função da aplicação de maturadores

O objetivo deste trabalho foi avaliar as alterações nos níveis de ácido chiquímico e ácido salicílico em plantas de cana-de-açúcar submetidas à aplicação de maturadores. Aplicou-se glyphosate nas doses de 400 e 200 mL ha-1 e na dose de 150 mL ha-1 em mistura com sulfumeturon-methyl a 12 e 20 g ha-1 e sulfumeturon-methyl a 20 g ha-1. As avaliações foram realizadas aos 15 e 30 dias após a aplicação (DAA) e aos 30, 60, 90, 120 e 150 dias após a colheita da cana-de-açúcar. Os teores de ácido chiquímico e salicílico nas plantas de canade-açúcar foram determinados por cromatografia líquida e espectrometria de massas. Os resultados mostraram que as doses de glyphosate correlacionaram-se diretamente com as concentrações de ácido chiquímico na planta, sendo superiores à da testemunha. Aos 30 DAA, houve aumento na concentração de ácido salicílico em todos os tratamentos estudados, revelando um processo de senescência da planta. Maiores doses de glyphosate promoveram aumento na concentração de ácido chiquímico e ácido salicílico antes da colheita da canade-açúcar. No período de crescimento da planta, aumentos nos teores dos ácidos chiquímico e salicílico revelaram dependência da aplicação dos produtos e também dos fatores abióticos e bióticos a que a cultura foi exposta.

Uso da cinza do bagaço da cana-de-açúcar como matéria-prima na substituição dos fundentes para aplicações em porcelanato

The present study aims to evaluate the potential use of bagasse ash from sugar cane (CBC) as a flux, replacing phyllite and/or feldspar in standard industrial mass production of enameled porcelain, verifying the possibility of the CBC contribute to the overall reduction of the coefficient of thermal expansion of the ceramic mass. To this end, as a result of the research, we characterized the raw material components of the standard mass (clay, phyllite, kaolin, feldspar, quartz and talc) and the residue of BCC, by testing by XRF, XRD, AG, DTA and ATG. Specimens (CDP) were manufactured in the dimensions of 100 mm x 50 mm x 8 mm in uniaxial matrix under compaction pressure of 33 MPa, assembled in batches of 3 units subsequently sintered at temperatures of 1150°C to 1210°C by varying the Rating Scale at 10°C, heating and cooling ramp of 50°C/min and 25°C/min, with levels of 1 min, 3 min, 5 min, 8 min, 10 min, 15 min, 30 min and 60 min. analyzing the results of the physical properties of water absorption (WA), linear firing shrinkage (LFS), dilatometric analysis (DTA), flexural strain (SFT) and SEM of the sintered bodies in order to verify the adequacy of CDP to ISO 13006, ISO 10545, NBR 13816 standards; NBR 13817 and NBR 13818. The study showed that the formulations that best suit the requirements of the standards are:. G4 - which was applied in 10% of replacing the CBC phyllite, sintering temperature 1210 ° C for 10 min and porch, and F3 - with application of 7.5% of CBC to replace the feldspar in the sintering temperatures of 1190°C, 1200°C and 1210°C for 10 min and porch. These formulations showed better performance regarding the formation of primary and secondary mullite, with considerable reduction of cracks and pores, meeting the prerequisites of standards for glazed porcelain. The results shows that the use of the CBC as a flux in the preparation of porcelain mass meets standard parameters for the manufacture of the product, and thereby can reduce environmental impact and the cost of production. Therefore, it is recommended to use this residue in the ceramics industry, due to its industrial, commercial and collaborative viability for sustainability.

Adição do resíduo de biomassa da cana-de-açúcar em pastas para cimentação de poços petrolíferos produtores de óleos pesados

The Potiguar basin has large fields of viscous oil where the used method for recovering is based on vapor injection; this operation is carried out by injecting vapor in the oilwell directly, without the protection of a revetment through thermal insulation, what causes its dilation and, consequently, cracks in the cement placed on the annular, and lost of hydraulic insulation; this crack is occasioned by the phenomenon of retrogression of the compressive resistance due to the conversion of the hydrated calcium silicate in phases calcium-rich, caused by the high temperatures in the wells, subjected to thermal recuperation. This work has evaluated the application of composite pastes with addition of residue of biomass of ground sugar-cane bagasse as anti-retrogression mineral admixture for cementation of oil-wells subjected to thermal recuperation. The addition of the mineral residue was carried out considering a relative amount of 10, 20, 30, 40 and 59% in relation to cement mass, trying to improve the microstructure of the paste, still being developed a reference paste only with cement and a paste with addition of 40% of silica flour - renowned material in the oil industry as anti-retrogression additive. Pozzolanic activity of the ash was evaluated through XRD, TG/DTG, as the resistance to compression, and it was also determined the physical and mechanical behavior of the pastes when submitted to cure at low temperatures (22 and 38º C); besides it was evaluated the behavior of the pastes when submitted to two cycles of cure at high temperature (280ºC) and pressure (7 MPa). It was verified that the ash of the sugar-cane biomass presents pozzolanic reaction and has great efficiency in decrease the permeability of the paste by filler effect, as well as that addition of ash in a relative amount of 10, 20 e 30% increases cured compressive resistance at low temperatures. It was also showed that the ash in a relative amount of 40% and 59% has very significant efficiency as anti-retrogression additive, since it prevents the decrease of compressive resistance and forms hydrated calcium silicate type xenotlita and tobermorita which have more resistance and stability in high temperatures

Uso da radiação gama na broca de cana-de-açúcar Diatraea saccharalis (f.) visando o seu controle.

A tecnica do Inseto Esteril (SIT) e um tipo de controle especifico e nao poluente de pragas tem sido ja utilizado com sucesso por alguns paises. A Broca da cana-de-acucar, D. saccharolla (F.), e um dos insetos candidatos ao controle por meio desta tecnica. No presente trabalho procurou-se estabelecer a dose de radiacao gama, que aplicada na fase pupal, torna os machos adultos estereis. utilizou-se crisalidas com idade de 5 a 7 dias, as quais foram irradiadas com doses de 3, 5, 7, e 9 Krad, mais a testemunha. Foram irradiados sob uma taxa de 35 Krad/hora. A medida que os machos emergiam dos pulparios, eram colocados junto com femeas normais para acasalamento. Atraves da contagem dos ovos ferteis, obteve-se 45%, 56%, 24%, 4% e 16% de fertilidade, respectivamentepara as doses de 0,3, 5, 7 e 9 Krad. O numero medio dos ovos por femea foi respectivamente de 69, 97, 100, 83, e 37. Pelos resultados nota-se que a dose de 7 Krad foi a que proporcionou maior esterelidade. O que esperava e que a porcentagem de fertilidade fosse inversamente proporcional as doses de radiacao, mas tal nao ocorreu pois a de Krad apresentou uma fertilidade maior em relacao a dose de 7 Krad. Em compensacao o numero de ovos por femea decresceu em funcao do aumento da dose de radiacao empregada.