Resposta tecidual induzida por Biodentine™e MTA Branco em subcutâneo de ratos

Pós-graduação em Odontologia - FOAR

Effect of colloidal silica on the mechanical properties of fiber-cement reinforced with cellulosic fibers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Radiopacity, pH and antimicrobial activity of Portland cement associated with micro- and nanoparticles of zirconium oxide and niobium oxide

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades físico-químicas e mecânicas, potencial bioativo e caracterização da interface dentina-cimento de cimentos endodônticos experimentais à base de cimento Portland associados à radiopacificadores micro e nanoparticulados

Pós-graduação em Odontologia - FOAR

Supercritical carbonation treatment on extruded fibre-cement reinforced with vegetable fibres

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of superconducting BSCCO/CaSiO3 and BSCCO/CaZrO3 Ag PIT wires

The addition of two compounds, calcium silicate and calcium zirconate was tested in the preparation of Bi: 2212 silver sheathed wires by powder-in-tube method. The wires were treated in an atmosphere of O-2/Ar using partial melting method. The characterizations were structural and on their electrical and magnetic properties. It was found that the addition of calcium silicate or zirconate promoted higher transition temperatures, up to 116 K for BSCCO with 1wt.% CaSiO3. The critical current densities determined by transport and magnetization measurements were improved in comparison with the wires without any addition.

Characterization of superconducting BSCCO/CaSiO3 and BSCCO/CaZrO3 Ag PIT wires

The addition of two compounds, calcium silicate and calcium zirconate was tested, in the preparation of Bi: 2212 silver sheathed wires by powder-in-tube method, which were successfully tested previously in processing chips. The wires were treated in an atmosphere of O2/Ar using partial melting method. The characterizations were structural and on their electrical and magnetic properties. As the results, transition temperatures were higher than the expected for this stage, ranged from 105K (BSCCO880) to 116K (+Si883). The critical current densities encountered in transport and magnetization measurements were improved in comparison with the wires without addition.

Dinâmica populacional de insetos fitófagos e predadores em cana-de-açúcar sob aplicação de silício

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Petrologia e geoquímica das rochas graníticas do maciço do Capão Bonito, SP

The granitic massif Capão Bonito is located in the southwest of the State of São Paulo and is associated with Neoproterozoic evolution of Central Mantiqueira Province. Its rocks outcrop along the edge of the Paraná Basin in a body with elongated shape whose major axis has a general NE-SW, covering an area of approximately 110km2. Occurs in intrusive epimetamorphic rocks of Votuverava Formation, Acungui Group and granitic rocks of the Três Córregos Complex and their placement is related to a brittle tectonics of NE-SW direction shear zones. In metasediments, when preserved from deformational features imposed by mylonitic deformation, preserve up textures and mineralogy of contact metamorphism with development of mineral in albite-epidote and hornblende hornfels facies. The Massif Capão Bonito consists of red syenogranites, holo-leucocratic with biotite and rare hornblende, medium to coarse inequigranulars and isotropic lightly mylonitic and / or cataclastic in marginal regions. Commercially are called Vermelho Capão Bonito and for export as Ruby Red Granite. Rocks belonging to the calcium-alkaline high potassium to shoshonitic series or the series subalkaline potassic and metaluminous to peraluminous character. The magmatism is compatible with granite type A, tardi-orogenic to anorogenic of intraplate environment, from the crust material with lower melting emplacement associated with correlated transtensive structure to shear zones in an extensional environment at the end of collisional event of Orogênese Ribeira. Metamorphism occurred in the region in the greenschist facies, low to medium, generating quartzites, phyllites, schists, and calcium-silicate metabasics

Resposta dos tecidos periodontais aos cimentos de silicato tricálcico associado ao óxido de zircônio ou óxido de nióbio usados no selamento de perfurações de furca em molares de ratos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resposta dos tecidos periodontais aos cimentos de silicato tricálcico associado ao óxido de zircônio ou óxido de nióbio usados no selamento de perfurações de furca em molares de ratos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Acúmulo de macronutrientes na soja influenciado pelo cultivo prévio do capim-marandu, correção e compactação do solo

O presente trabalho foi desenvolvido com o objetivo de avaliar o efeito do cultivo prévio do capim-Marandu (Brachiaria brizantha cv. Marandu), da aplicação de corretivos e da compactação do solo no acúmulo de macronutrientes pela soja cultivada em sucessão. O delineamento experimental foi inteiramente casualizado em esquema fatorial 4 x 6 x 2, com três repetições. Os fatores de estudo foram quatro densidades do solo: 1,0; 1,20; 1,40 e 1,60 Mg m-3; seis tratamentos de correção: 1) controle, sem correção; 2) calcário; 3) silicato de cálcio; 4) gesso; 5) calcário + gesso; 6) silicato de cálcio + gesso; além de dois sistemas de cultivo: com e sem cultivo prévio do capim-Marandu. As unidades experimentais foram compostas por vasos de tubos de PVC de 20 cm de diâmetro, compostos por dois anéis: o anel inferior, de 40 cm de altura, recebeu o solo sob condições naturais e densidade de 1,0 Mg m-3; o anel superior, com 20 cm de altura representando 6,28 dm³, recebeu os tratamentos de densidades, correção e gesso como descrito adiante. Em cada um foram conduzidas três plantas de soja (cv. Conquista) até o final do ciclo, quando o acúmulo de macronutrientes pela cultura foi avaliado. Os resultados mostraram que o cultivo prévio do capim-Marandu e o uso de corretivos amenizaram os efeitos negativos da compactação do solo sobre a nutrição da soja. A utilização de corretivos do solo contribuiu para o aumento no acúmulo de macronutrientes na parte aérea da soja, porém o incremento na compactação diminuiu o acúmulo de N, P, K, Ca, Mg e S. A compactação do solo persistiu parcialmente mediante o cultivo prévio com o capim marandu.

Surface layer formation in polymer melts and in solutions

In this work the surface layer formation in polymer melts and in polymer solutions have been investigated with the atomic force microscope (AFM). In polymer melts, the formation of an immobile surface layer results in a steric repulsion, which can be measured by the AFM. From former work it is know, that polydimethyl siloxane (PDMS) forms a stable surface layer for molecular weights above 12 kDa. In the present thesis, polyisoprene (PI) was investigated apart from PDMS, by a)measuring the steric surface interactions and b)measuring the surface slip in hydrodynamic experiments. If a polymer flows over a surface, the flow velocity at the surface is larger then zero. If case of a surface layer formation the flow plane changes to the top of the adsorbed layer and the surface slip is reduced to zero. By measuring the surface slip in hydrodynamic experiments, it is therefore possible to determine the presence of a stable surface layer. The results show no stable repulsion for PI and only a small decrease of the surface slip. This indicates that PI does not form a stable surface layer, but is only adsorbed weakly to the surface. Furthermore for 8 kDa PDMS the timescale of the formation of a surface layer was investigated by changing themaximal force the tip applied to the surface. With a repulsive force present, applying a higher force than 15 nN resulted in a destruction of the surface layer, indicated by attractive forces. Reducing the applied force below 15 nN then resulted in an increase of the repulsion to the former state during one minute, thus indicating that a surface layer can be formed within one minute even under the influence of continuous measurements. As a next step, mixtures of two PDMS homopolymers with different chain lengths have been investigated. The aim was to verify theoretical predictions that shorter chains should predominate at the surface due to their smaller loss in conformational entropy. The measurements where done in dependence of the volume fractions of short and long chain PMDS. The results confirmed the short chain dominance for all mixtures with less then 90 vol.% long chain PDMS. Surface layer formation in solution was investigated for superplasticizers which are industrially used as an additive to cement. They change the surface interaction between the cement grains from attractive to repulsive and the freshlymixed cement paste therefore becomes liquid. The aimin this part of the thesis was, to investigate cement particle interactions in a close to real environment. Therefore calcium silicate hydrate phases have been precipitated onto an AFM tip and onto a calcite crystal and the interaction between these surfaces have beenmeasured with and without addition of superplasticizers. The measurements confirmed the change from attraction to repulsion upon addition of superplasticizers. The repulsive steric interaction increased with the length of the sidechain of the superplasticizer, and the dependence of the range of the steric interactions on the sidechain length indicated that the sidechains are in a coiled conformation.

Spectroscopic study of Bioceramics for Endodontic and Orthopaedics

This thesis was aimed at investigating the physical-chemical properties and the behaviour in physiological environment of two classes of bioceramics: calcium silicate-based dental cements and alumina-based femoral heads for hip joint prostheses. The material characterization was performed using spectroscopic techniques such as that allow to obtain information on the molecular structure of the species and phases present in the analyzed samples. Raman, infrared and fluorescence spectroscopy was principally used. Calcium silicate cements, such as MTA (Mineral Trioxide Aggregate), are hydraulic materials that can set in presence of water: this characteristic makes them suitable for oral surgery and in particular as root-end filling materials. With the aim to improve the properties of commercial MTA cements, several MTA-based experimental formulations have been tested with regard to bioactivity (i.e. apatite forming ability) upon ageing in simulated body fluids. The formation of a bone-like apatite layer may support the integration in bone tissue and represents an essential requirement for osteoconduction and osteoinduction. The spectroscopic studies demonstrated that the experimental materials under study had a good bioactivity and were able to remineralize demineralized dentin. . Bioceramics thanks to their excellent mechanical properties and chemical resistance, are widely used as alternative to polymer (UHMWPE) and metal alloys (Cr-Co) for hip-joint prostesis. In order to investigate the in vivo wear mechanisms of three different generations of commercial bioceramics femoral heads (Biolox®, Biolox® forte, and Biolox® delta), fluorescence and Raman spectroscopy were used to investigate the surface properties and residual stresses of retrieved implants. Spectroscopic results suggested different wear mechanisms in the three sets of retrievals. Since Biolox® delta is a relatively recent material, the Raman results on its retrievals has been reported for the first time allowing to validate the in vitro ageing protocols proposed in the literature to simulate the effects of the in vivo wear.

Biomaterials for Clinical Application in Endodontics

Endodontic therapy consists in the management of several tissues such as pulp tissue, periodontal tissue, periapical bone and dentine. These tissues are often contaminated by blood, periapical exudates and biological fluids. An ideal orthograde or retrograde filling material should be non toxic, noncarcinogenic, nongenotoxic, biocompatible with the host tissues, insoluble in tissue fluids, and dimensionally stable. Calcium-silicate MTA based cements own many of these ideal characteristics, but the long setting time, the non-easy handling and the lack of mechanical properties at early times are few drawbacks which may complicate the clinical application. The aim of this study was to investigate the chemical, physical and biological properties of calcium-silicate MTA cements in order to improve the mechanical properties and the handling keeping the biological characteristics unchanged. Chemical and physical properties such as setting time, solubility, water-uptake, ion release, sealing ability were investigated according the ISO and ADA specifications. The bioactivity (ability to produce apatite nano-sferulities) of MTA cements were evaluated using ESEM/EDX, micro-Raman and ATR/FTIR spettroscopy.