Alternative to peat for Agaricus brasiliensis yield

Casing layer is one of the most important components of Agaricus spp. production and it directly affects mushroom productivity, size and mass. The aim of this study was to evaluate potential raw materials as a casing layer and their effect on Agaricus brasiliensis productivity. Raw materials from Brazil with potential use were selected and characterized, and the most promising ones were tested as casing layers for mushroom yield. Evaluated raw materials included lime schist, vermiculite, eucalyptus sawdust, sand, São Paulo peat, Santa Catarina peat, subsoil and charcoal. Particle size, porosity and water absorption in relation to mushroom yield for casing layers were determined. Lime schist, an alternate casing layer to peat, is presented and the effects of the casing layer on the mushroom yield are discussed. © 2009 Elsevier Ltd. All rights reserved.

Desempenho de novilhas de corte alimentadas com cana hidrolisada

The objective of this study was to evaluate the performance, consumption and feed conversion of Angus x Nellore heifers fed hydrolyzed sugarcane. Twenty-four (1/2 Angus x Nellore crossbred) heifers were used with average body weight of 242 kg ± 23 kg, confined in individual pens with total area of 15 m2. The study consisted of six treatments distributed as follows: T1-in natura sugarcane: sugarcane was given to animals after being chopped; T2-hydrolyzed sugarcane with 0.5 % lime and 24 hours of air exposure; T3-hydrolyzed sugarcane with 0.5 % lime and 48 hours of air exposure; T4-hydrolyzed sugarcane with 1.0 % lime and 24 hours of air exposure; T5-hydrolyzed sugarcane with 1.0 % lime and 48 hours of air exposure; T6-hydrolyzed sugarcane with 1.0 % lime and 72 hours of air exposure. We used a completely randomized design with four replicates per treatment, and averages were compared by Tukey test at 5 % significant level of probability. No statistical difference was found for any of the treatments (P>0.05). The processing of sugarcane with lime did not increase the intake and performance of animals evaluated in this study.

Cana-de-açúcar in natura e queimada ensilada com cal virgem e diferentes tempos após a queima

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação do potencial de uso agrícola da fluorita com óxido silício (AgroSiCa), derivado da fabricação de fertilizantes fosfatados

Phosphate fertilizers are critical for crop production in tropical soils, which are known for having high phosphate-fixing capacity and aluminium saturation, as well as low pH and calcium contents. Fluorine is a component of many phosphate rocks used to make phosphate fertilizers, via a process that generates hexafluorosilicic acid (H2SiF6). While many treatment technologies have been proposed for removal of fluorine in industrial facilities, little attention has been given to a process of neutralizing H2SiF6 with calcium oxide aiming to find out an alternative and sustainable use of a by-product with a great potential for beneficial use in tropical agriculture. This study evaluated the effect of a by-product of phosphoric acid production (fluorite with silicon oxide, hereafter called AgroSiCa) in levels of phosphorus (P), calcium (Ca), silicon (Si), aluminum (Al) and fluorine (F) and some others parameters in soils as on growth of soybean and corn. Experiments were conducted in a greenhouse condition at the Federal University of Lavras (UFLA), Lavras, Minas Gerais, using different types of soils in tropical regions and different doses of AgroSiCa. The application of AgroSiCa resulted in a slight increase in soil pH and significant increases in calcium, phosphorus and silicon in the soil solution and the shoots of corn and soybeans. We also found very low levels of fluoride in all soil leachates. A significant reduction of labile aluminum levels found in all soils after the cultivation of corn and soybeans. In sum, AgroSiCa improved soil properties and contributed to better growth of both cultures. In sum, AgroSiCa improved soil properties and contributed to a better growth of both crops. Our results show that reacting H2SiF6 derived from the wet-process phosphoric acid production with calcium oxide leads to a by-product with potential for agricultural use, especially when applied in highly-weathered soils. Besides providing calcium and silicon to plants, the use of such by-product in soils with high phosphate-fixing capacity and high aluminium saturation delivers additional benefits, since fluoride and silicon can play an important role in improving soil conditions due to the formation of less plant-toxic forms of aluminium, as well as upon decreasing phosphate fixation, thus improving root development and making fertilizer-derived phosphate more available for plant growth.

Ensilagem da cana-de-açúcar in natura ou queimada e aditivada ou não com óxido de cálcio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Craqueamento termocatalítico do óleo de buriti (Mauritia flexuosa L.), óleo de palma (Elaeis guineensis) e sabões do óleo de buriti (Mauritia flexuosa L)

O presente trabalho visa investigar o Processo de Craqueamento Termocatalítico do Óleo de Buriti (Mauritia flexuosa L.), óleo de palma (Elaeis guineensis) e sabão de óleo de buriti, considerando a transformação dos óleos vegetais e sabões via craqueamento termocatalítico em biocombustíveis, utilizando-se Na₂CO₃ (Carbonato de Sódio), CaCO₃ (Carbonato de Cálcio),CaO (óxido de cálcio) e Zeólitas Ácidas (HZSM-5) como catalisadores,as temperaturas de 420, 450 e 480 °C.O fruto de Buriti (Mauritia flexuosa L.) foi coletado e extraído óleo da polpa, em seguida este óleo foi caracterizado em relação Índice de Acidez, Índice de saponificação, Viscosidade Cinemática, Densidade , Índice de Refração e análise de CHN.Para testes preliminares foi utilizado o óleo de palma refinado e neutralizado portanto eles não foram caracterizados.O sabão de buriti foi preparado em laboratório com hidróxido de potássio e hidróxido de sódio e armazenados para pirólise térmica.Os catalisadores também foram caracterizados com relação ao infravermelho,Ressonância Magnética Nuclear de ²⁹Si e ²⁷Al, difração de raio X ,análise térmica, análise química e TPD de Amônia .No processo de craqueamento termocatalítico os produtos líquidos produzidos foram analisados quanto aos parâmetros: rendimento, índice de acidez, espectro de infravermelho, espectro de RMN e análise de CHN em seguida foram caracterizados com relação à densidade e viscosidade cinemática. No entanto, com relação ao índice de acidez dos produtos líquidos, somente os catalisadores básicos produziram craqueados com valores aceitáveis para utilização como combustível. A partir dos resultados verificou-se a eficiência dos catalisadores no qual o catalisador carbonato de sódio forneceu produtos de baixa acidez e com boas características para uso como combustível.

Aditivos na silagem de cana-de-açúcar “in natura” ou queimada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cana-de-açúcar hidrolisada com doses crescentes de cal virgem e tempos de exposição ao ar para a alimentação de bovinos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Digestibility and nitrogen balance of lambs fed sugarcane hydrolyzed under different conditions as roughage in the diet

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho e consumo de nutrientes em cordeiros alimentados com cana-de-açúcar hidrolizada sob diferentes condições

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de tijolos cerâmicos com escória de alto-forno

The construction industry is booming, and the federal government is heavily financially supporting public housing. This scenario is very favorable for the development of construction materials, especially low-cost construction. Thus, this study aims to develop a new class of unfired clay masonry bricks: GGBS stabilized bricks. Studies show that the ground granulated blast furnace slag, a material used as raw material in cement manufacture, can be used together with calcium oxide in soil stabilization for the manufacture of bricks. This study aims to test and identify the best parameters for the manufacture of unfired bricks, adapting its composition to the materials found in Brazil and identify the optimum curing conditions for our climate. So far preliminary studies were done to verify the technical feasibility of the material. Future studies should be done to ascertain the economic feasibility and environmental gains of such material

Quantitative measures of lambs fed hydrolyzed sugarcane under aerobic and anaerobic conditions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Propriedades físicas, químicas, antimicrobianas e biológicas de cimentos endodônticos com óxido de cálcio e resina salicilato

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Bromatological characteristics and in vitro digestibility of four sugarcane varieties subjected or not to the application of quicklime

The experiment was conducted to evaluate the bromatological characteristics and the in vitro digestibility of four sugarcane varieties, subjected or not to hydrolysis, with quicklime. A completely randomized design was employed with three replications arranged in a 4 × 2 factorial scheme, with four sugarcane varieties (SP 52454, RB 867515, RB 855536 and IAC 862480), hydrolyzed or not. There was significant effect on brix (p < 0.05) and industrial fiber (p < 0.05), and IAC 862480 variety had the lowest levels of industrial fiber. There were no significant difference (p > 0.05) in neutral detergent fiber, acid detergent fiber and lignin levels among the sugarcane varieties under analysis and for the sugarcanes, hydrolyzed or not. The use of sugarcane hydrolysis with 1% quicklime improves the in vitro digestibility of NDF and ADF, regardless of the variety studied. Hydrolysis with 1% quicklime did not alter the sugarcane chemical composition.

Distribution of metals in several vineyards of North Italy: from soil to wine

Nowadays we live in densely populated regions and this leads to many environmental issues. Among all pollutants that human activities originate, metals are relevant because they can be potentially toxic for most of living beings. We studied the fate of Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn in a vineyard environment analysing samples of plant, wine and soil. Sites were chosen considering the type of wine produced, the type of cultivation (both organic and conventional agriculture) and the geographic location. We took vineyards that cultivate the same grape variety, the Trebbiano). We investigated 5 vineyards located in the Ravenna district (Italy): two on the Lamone Valley slopes, one in the area of river-bank deposits near Ravenna city, then a farm near Lugo and one near Bagnacavallo in interfluve regions. We carried out a very detailed characterization of soils in the sites, including the analysis of: pH, electric conductivity, texture, total carbonate and extimated content of dolomite, active carbonate, iron from ammonium oxalate, Iron Deficiency Chlorosis Index (IDCI), total nitrogen and organic carbon, available phosphorous, available potassium and Cation Exchange Capacity (CEC). Then we made the analysis of the bulk chemical composition and a DTPA extraction to determine the available fraction of elements in soils. All the sites have proper ground to cultivate, with already a good amount of nutrients, such as not needing strong fertilisations, but a vineyard on hills suffers from iron deficiency chlorosis due to the high level of active carbonate. We found some soils with much silica and little calcium oxide that confirm the marly sandstone substratum, while other soils have more calcium oxide and more aluminium oxide that confirm the argillaceous marlstone substratum. We found some critical situations, such as high concentrations of Chromium, especially in the farm near Lugo, and we noticed differences between organic vineyards and conventional ones: the conventional ones have a higher enrichment in soils of some metals (Copper and Zinc). Each metal accumulates differently in every single part of grapevines. We found differences between hill plants and lowland ones: behaviors of plants in metal accumulations seems to have patterns. Metals are more abundant in barks, then in leaves or sometimes in roots. Plants seem trying to remove excesses of metal storing them in bark. Two wines have excess of acetic acid and one conventional farm produces wine with content of Zinc over the Italian law limit. We already found evidence of high values relating them with uncontaminated environments, but more investigations are suggested to link those values to their anthropogenic supplies.