Respiratory effects of an exposure to grain dust among grain workers in the Vaud region (Switzerland)

Introduction: Bioaerosols such as grain dust, via biologically active agents, elicit local inflammation and direct immunological reactions within the human respiratory system. Workplace-dependent exposure to grain dust (GD) may thus induce asthma, chronic bronchitis, and hypersensitivity pneumonitis. The aim of this study is to assess the clinical impact of occupational exposure to GD and to determine quantitative biological markers of bioaerosol exposure in grain workers. Methods: This longitudinal study has been conducted from summer 2012, to summer 2013, comprising 6 groups of 30 active workers with different GD exposure patterns (4 groups of grain workers, 2 control groups). After obtaining informed consent, two evaluations at high- and low-exposing seasons take place, during which an occupational history and a detailed medical history are questionnaire-assessed, lung function is evaluated by spirometry, airway inflammation is measured by exhaled nitric oxide (eNO), and specific blood IgG and IgE are titrated. The preliminary results presented hereafter are those of two of the four exposed groups, namely harvesters and mill workers, compared to the control groups, at first assessment (n=100). Results: Mean age is 38.4 [years]; 98% are male. Exposed groups differ from controls (p<0.05) in daily contact with animals (57% vs. 40%) and active smoking (39% vs. 11%). Grain workers have more respiratory (50%), nasal (57%), ocular (45%), dermatologic (36%) and systemic (20%) occupational symptoms than controls (6.4%, 19%, 16%, 6.4%, 1.6% respectively, p<0.05). Lower mean peak-expiratory-flow (PEF) values (96.1 ± 18.9 vs. 108.2 ± 17.4 [% of predicted], p<0.05) and eNO values (13.9 ± 9.6 vs. 20.5 ± 14.7 [ppm], p<0.05) are observed in the exposed groups. Conclusion: Preliminary results show a higher prevalence of clinical symptoms and a lower mean PEF value in the exposed groups. Detailed supplementary analyses are pending.

Correlation of Der p 2 T-cell responses with clinical characteristics of children allergic to house dust mite.

BACKGROUND: An understanding of the mechanisms responsible for the development and maintenance of allergic inflammation and their clinical implications is needed to develop specific and successful treatment for allergy. OBJECTIVES: To characterize in vitro T-cell responses to Der p 2, one of the major allergens of house dust mite (HDM), and investigate potential correlations between clinical and laboratory parameters. METHODS: Forty-two patients monosensitized to HDM and 10 age-matched, healthy children were studied. Dendritic cells pulsed with Der p 2 were used to stimulate autologous CD14(-) cells. Der p 2-specific T-cell activation markers, proliferation, and cytokine production profiles were examined. RESULTS: Der p 2-specific T-cell activation markers, proliferation, and T(H)2 cytokine production were significantly higher in HDM patients compared with healthy controls. Moreover, a significant correlation between proliferation and T(H)2 cytokine production was observed. Within the allergic group, skin reaction to HDM was significantly stronger in patients with a Der p 2-specific T-cell response. Levels of HDM-specific IgE directly correlated with interleukin 5 and interleukin 13 levels and with skin prick test results and, ultimately, with the patient's family history of allergy. Furthermore, the presence of atopic march correlated with T-cell proliferation. CONCLUSION: We found that, in HDM patients, Der p 2-specific T(H)2 responses, promoted by autologous dendritic cells in vitro, correlate with clinical parameters.

Vertical integration or specialisation: producing and commercialising cotton goods (1815-1913)

This article describes the ways in which cotton goods were commercialised during the nineteenth century and the first third of the twentieth. Several national cases are analysed: Britain, as the Workshop of the World; France, Germany, Switzerland and the US, as core economies; and Italy and Spain as countries on the European periphery. The main question that we address is why some cotton industries vertically integrated their production and commercialisation processes, but others did not. We present a model that combines industrial district size and product differentiation to explain why vertical integration was present in most cases and why there was vertical specialisation in Lancashire and Lowell.

Cotton manufacturers as bankers: the textile trade and credit in spain, 1840-1913

[cat] La historiografia ha assenyalat que en el segle XIX el crèdit que els fabricants cotoners catalans oferien als seus clients era de caràcter informal i, per tant, impossible de ser transferit al sistema bancari. Això hauria tingut un efecte negatiu en la rendibilitat de les empreses cotoneres. A partir de l’anàlisi de diversos arxius empresarials, així com de fonts judicials i notarials, aquest treball confirma aquesta descripció dels fets però proposa una interpretació més optimista. Els fabricants feien de banquers dels seus clients perquè eren els millor situats per a exercir aquesta funció. Havien construït una bona estructura d’informació, gestionaven eficientment el risc creditici i obtenien beneficis d’aquesta activitat.

Monitoring nitrogen nutrition in cotton

Both N excess and deficiency may affect cotton yield and quality. It would therefore be useful to base the N management fertilization on the monitoring of the nutritional status. This study investigated the correlations among the following determination methods of the N nutritional status of cotton (Gossypium hirsutum L., var. Latifolia): chlorophyll readings (SPAD-502®, Minolta), specific-ion nitrate meter (Nitrate Meter C-141, Horiba-Cardy®), and laboratory analysis (conventional foliar diagnosis). Samples were taken weekly from two weeks before flowering to the fifth week after the first flower. The experiment was conducted on the Fazenda Santa Tereza, Itapeva, State of São Paulo, Brazil. The crop was fertilized with 40 kg ha-1 N at planting and 0, 30, 60, 90, and 120 kg ha-1 of side-dressed N. The range of leaf N contents reported as adequate for samples taken 80-90 days after plant emergence (traditional foliar diagnosis) may be used as reference from the beginning of flowering when the plant is not stressed. Specific-ion nitrate meter readings can be used as a nutritional indicator of cotton nutrition from one week after pinhead until the third week of flowering. In this case, plants are well-nourished when readings exceed 8,000 mg L-1 NO3-. The chlorophyll meter can also be used to estimate the nutritional status of cotton from the third week of flowering. In this case the readings should be above 48 in well-nourished plants.

Beaufils ranges to assess the cotton nutrient status in the southern region of Mato Grosso

The relationships between nutrient contents and indices of the Diagnosis and Recommendation Integrated System (DRIS) are a useful basis to determine appropriate ranges for the interpretation of leaf nutrient contents. The purpose of this study was to establish Beaufils ranges from statistical models of the relationship between foliar concentrations and DRIS indices, generated by two systems of DRIS norms - the F value and natural logarithm transformation - and assess the nutritional status of cotton plants, based on these Beaufils ranges. Yield data from plots (average acreage 100 ha) and foliar concentrations of macro and micronutrients of cotton (Gossypium hirsutum r. latifolium) plants, in the growing season 2004/2005, were stored in a database. The criterion to define the reference population consisted of plots with above-average yields + 0.5 standard deviation (over 4,575 kg ha-1 seed cotton yield). The best-fitting statistical model of the relationship between foliar nutrient concentrations and DRIS indices was linear, with R² > 0.8090, p < 0.01, except for N, with R² = 0.5987, p < 0.01. The two criteria were effective to diagnose the plant nutritional status. The diagnoses were not random, but based on the effectiveness of the chi-square-tested method. The agreement between the methods to assess the nutritional status was 92.59-100 %, except for S, with 74.07 % agreement.

Compared boron uptake and translocation in cotton cultivars

The mobility of boron (B), a commonly deficient micronutrient in cotton, has been shown to be low in the plant phloem. Nevertheless, studies have indicated that cotton cultivars can respond differently to B application. A greenhouse experiment was conducted to compare B absorption and mobility in cotton cultivars grown in nutrient solution. Treatments consisted of three cotton cultivars (FMT 701, DP 604BG and FMX 993), and five B rates (0.0, 2.5, 5.0, 10.0, and 20.0 µmol L-1). Plant growth and development were monitored for four weeks from the appearance of the first square. The time of onset and severity of B deficiency symptoms varied among cotton cultivars. Initial B uptake of cv. DP 604BG was lower than of the other cultivars, but a greater amount of available B in the nutrient solution was required to prevent deficiency symptoms in this cultivar. Boron deficiency impairs cotton growth, with no differences among cultivars, regardless of the time of appearance and intensity of B deficiency symptoms.

Assessment of bioaerosols and inhalable dust exposure in Swiss sawmills

An assessment of wood workers' exposure to airborne cultivable bacteria, fungi, inhalable endotoxins and inhalable organic dust was performed at 12 sawmills that process mainly coniferous wood species. In each plant, samples were collected at four or five different work sites (debarking, sawing, sorting, planing and sawing cockpit) and the efficiency of sampling devices (impinger or filter) for determining endotoxins levels was evaluated. Results show that fungi are present in very high concentrations (up to 35 000 CFU m(-3)) in all sawmills. We also find that there are more bioaerosols at the sorting work site (mean +/- SD: 7723 +/- 9919 CFU m(-3) for total bacteria, 614 +/- 902 CFU m(-3) for Gram-negative, 19 438 +/- 14 246 CFU m(-3) for fungi, 7.0 +/- 9.0 EU m(-3) for endotoxin and 2.9 +/- 4.8 g m(-3) for dust) than at the sawing station (mean +/- SD: 1938 +/- 2478 CFU m(-3) for total bacteria, 141 +/- 206 CFU m(-3) for Gram-negative, 12 207 +/- 10 008 CFU m(-3) for fungi, 2.1 +/- 1.9 EU m(-3) for endotoxin and 0.75 +/- 0.49 mg m(-3) for dust). At the same time, the species composition and concentration of airborne Gram-negative bacteria were studied. Penicillinium sp. were the predominant fungi, while Bacillus sp. and the Pseudomonadacea family were the predominant Gram-positive and Gram-negative bacteria encountered, respectively. [Authors]

Nitrogen and Potassium in Narrow-Row Cotton

ABSTRACT Information on fertilizer management for cotton in narrow-row cropping system is scarce; therefore, studies are needed to improve nutrient stewardship for such systems. The aim of this study was to evaluate the effects of nitrogen and potassium application on yield and fiber quality of cotton under a narrow-row system. A field trial was carried out for three years, where the treatments were set up in an incomplete factorial arrangement [(4 × 4) + 1] under a randomized block design, with four N rates (20, 40, 60, and 80 kg ha-1), four K2O rates (0, 40, 80, and 120 kg ha-1), and one control (no N or K2O), for a total of 17 treatments, with four replicates. Urea and potassium chloride were applied on the soil surface 20 days after crop emergence. Varieties used were FMT 701 (2009/2010 and 2010/2011) and FMT 709 (2011/2012). Cotton yield and fiber quality parameters were measured. In the narrow-row cropping system, cotton lint yield was positively affected by N and K application. Cotton yield in relation to K applications was not dependent on N rates. Potassium application increased the micronaire index and fiber resistance, whereas high N rates reduced fiber resistance.

Vertical integration or specialisation: producing and commercialising cotton goods (1815-1913)

This article describes the ways in which cotton goods were commercialised during the nineteenth century and the first third of the twentieth. Several national cases are analysed: Britain, as the Workshop of the World; France, Germany, Switzerland and the US, as core economies; and Italy and Spain as countries on the European periphery. The main question that we address is why some cotton industries vertically integrated their production and commercialisation processes, but others did not. We present a model that combines industrial district size and product differentiation to explain why vertical integration was present in most cases and why there was vertical specialisation in Lancashire and Lowell.