Three-dimensional nitrogen-doped graphene supported molybdenum disulfide nanoparticles as an advanced catalyst for hydrogen evolution reaction

An efficient three-dimensional (3D) hybrid material of nitrogen-doped graphene sheets (N-RGO) supporting molybdenum disulfide (MoS2) nanoparticles with high-performance electrocatalytic activity for hydrogen evolution reaction (HER) is fabricated by using a facile hydrothermal route. Comprehensive microscopic and spectroscopic characterizations confirm the resulting hybrid material possesses a 3D crumpled few-layered graphene network structure decorated with MoS2 nanoparticles. Electrochemical characterization analysis reveals that the resulting hybrid material exhibits efficient electrocatalytic activity toward HER under acidic conditions with a low onset potential of 112 mV and a small Tafel slope of 44 mV per decade. The enhanced mechanism of electrocatalytic activity has been investigated in detail by controlling the elemental composition, electrical conductance and surface morphology of the 3D hybrid as well as Density Functional Theory (DFT) calculations. This demonstrates that the abundance of exposed active sulfur edge sites in the MoS2 and nitrogen active functional moieties in N-RGO are synergistically responsible for the catalytic activity, whilst the distinguished and coherent interface in MoS 2 /N-RGO facilitates the electron transfer during electrocatalysis. Our study gives insights into the physical/chemical mechanism of enhanced HER performance in MoS2/N-RGO hybrids and illustrates how to design and construct a 3D hybrid to maximize the catalytic efficiency.

Operando synchronous DRIFTS/MS/XAS as a powerful tool for guiding the design of Pd catalysts for the selective oxidation of alcohols

The selective aerobic oxidation of crotyl alcohol to crotonaldehyde was investigated by time-resolved synchronous DRIFTS/MS/XAS over silica and alumina supported Pd nanoparticles. Alcohol and oxygen reactant feeds were cycled through the catalyst bed while dynamic measurements of the palladium oxidation state, molecular adsorbates and evolved product distribution were made simultaneously on a sub-second timescale. Highly dispersed palladium nanoparticles remained in a partially oxidised state

Rational design of heterogeneous catalysts for biodiesel synthesis

Dwindling oil reserves and growing concerns over carbon dioxide emissions and associated climate change are driving the utilisation of renewable feedstocks as alternative, sustainable fuel sources. Catalysis has a rich history of facilitating energy efficient, selective molecular transformations, and contributes to 90% of current chemical manufacturing processes. In a post-petroleum era, catalysis will be pivotal in overcoming the scientific and engineering barriers to economically feasible bio-fuels. This perspective highlights some recent developments in heterogeneous catalysts for the synthesis of biodiesel from renewable resources, derived from plant and aquatic oil sources. Particular attention will be paid to the importance of catalyst pore architecture, surface polarity and acid and base properties, in meeting the challenge of transforming highly polar and viscous bio-based reactants. © 2012 The Royal Society of Chemistry.

Rebirth of a neighborhood: In streetscape design

This study involves one of the eight neighborhoods in the City of Miami named Little Havana. Little Havana, once a flourishing Hispanic community during the 1960s through the 1980s, is now experiencing housing deterioration, economic disinvestment, and increased social needs. ^ Although the City developed a Community Development Plan for the neighborhood addressing the neighborhood problems, needs, and objectives, it failed to address and take advantage of the area's prominent commercial street, Calle Ocho, as a cultural catalyst for the revitalization of the neighborhood. With an urban study and understanding of the area's needs for transit system improvements, program analysis, and a valuable architectural inventory, an intervention project can be developed. The project will capitalize on the area's historical and cultural assets and serve as a step towards altering the area's decline and revitalizing the street and community to recapture the energy present during the early years of the massive Cuban migration. ^

Campus Design: Locating a new center of international studies

FIU's campus master plan should portray an overall concept of the University's vision. Its design should represent a distinctive sense of institutional purpose. Its architecture should support the campus design in the realization of an ideal academic environment. The present master plan of Florida International University (FIU) offers neither a clear typology of architectural elements nor adequate relationships and connections between buildings. FIU needs to enhance its master plan with an architectural and urban vocabulary that creates a better environment. This thesis will examine FIU's present master plan, explaining the history of its development. Further, it will critically examine the quality of the campus, highlighting the success and failure of its various parts. The unrealized potential of the campus' original vision will be juxtaposed to the built reality. In addition, FlU's planning strategies will be parallel with the planning of several master plans of American universities. Finally, this thesis will propose a set of criteria for the inclusion of a new building in the campus master plan. The Center of International Study will be the catalyst that would bring into focus the university's vision. As a means to prove the validity of these criteria, a new location for the center of international studies will be selected, and a schematic architectural proposal will be made.

Design and Experimental Investigation of a Hydroxyl Ammonium Nitrate Based Workhorse Microthruster

Thesis (Master's)--University of Washington, 2016-08

Toxic metal recovery from spent hydroprocessing catalyst

Spent hydroprocessing catalysts (HPCs) are solid wastes generated in refinery industries and typically contain various hazardous metals, such as Co, Ni, and Mo. These wastes cannot be discharged into the environment due to strict regulations and require proper treatment to remove the hazardous substances. Various options have been proposed and developed for spent catalysts treatment; however, hydrometallurgical processes are considered efficient, cost-effective and environmentally-friendly methods of metal extraction, and have been widely employed for different metal uptake from aqueous leachates of secondary materials. Although there are a large number of studies on hazardous metal extraction from aqueous solutions of various spent catalysts, little information is available on Co, Ni, and Mo removal from spent NiMo hydroprocessing catalysts. In the current study, a solvent extraction process was applied to the spent HPC to specifically remove Co, Ni, and Mo. The spent HPC is dissolved in an acid solution and then the metals are extracted using three different extractants, two of which were aminebased and one which was a quaternary ammonium salt. The main aim of this study was to develop a hydrometallurgical method to remove, and ultimately be able to recover, Co, Ni, and Mo from the spent HPCs produced at the petrochemical plant in Come By Chance, Newfoundland and Labrador. The specific objectives of the study were: (1) characterization of the spent catalyst and the acidic leachate, (2) identifying the most efficient leaching agent to dissolve the metals from the spent catalyst; (3) development of a solvent extraction procedure using the amine-based extractants Alamine308, Alamine336 and the quaternary ammonium salt, Aliquat336 in toluene to remove Co, Ni, and Mo from the spent catalyst; (4) selection of the best reagent for Co, Ni, and Mo extraction based on the required contact time, required extractant concentration, as well as organic:aqueous ratio; and (5) evaluation of the extraction conditions and optimization of the metal extraction process using the Design Expert® software. For the present study, a Central Composite Design (CCD) method was applied as the main method to design the experiments, evaluate the effect of each parameter, provide a statistical model, and optimize the extraction process. Three parameters were considered as the most significant factors affecting the process efficiency: (i) extractant concentration, (ii) the organic:aqueous ratio, and (iii) contact time. Metal extraction efficiencies were calculated based on ICP analysis of the pre- and post–leachates, and the process optimization was conducted with the aid of the Design Expert® software. The obtained results showed that Alamine308 can be considered to be the most effective and suitable extractant for spent HPC examined in the study. Alamine308 is capable of removing all three metals to the maximum amounts. Aliquat336 was found to be not as effective, especially for Ni extraction; however, it is able to separate all of these metals within the first 10 min, unlike Alamine336, which required more than 35 min to do so. Based on the results of this study, a cost-effective and environmentally-friendly solventextraction process was achieved to remove Co, Ni, and Mo from the spent HPCs in a short amount of time and with the low extractant concentration required. This method can be tested and implemented for other hazardous metals from other secondary materials as well. Further investigation may be required; however, the results of this study can be a guide for future research on similar metal extraction processes.

Catalyst: Architecture for Change and Social Justice

In major cities today, there are neighborhoods that have been continually underserved and as a result are in decay. Private investors and developers turn to these particular neighborhoods, propose large developments that gentrify these areas, displacing communities and with them their social, political, and economic issues. The purpose of this thesis is to analyze South West, Baltimore, a community composed of 8 neighborhoods on the verge of being gentrified, by incoming development. Through investigating the key issues present in this community for many years, this thesis will attempt to develop a catalytic environment, which will facilitate change within the community by providing a place for its members to help tackle these issues, improving their circumstances, and the circumstances of the neighborhoods they form part of.

South Carolina’s Creative Cluster : A Catalyst for Economic Development

This report presents results from a study of the creative economy associated with the arts, design, crafts and related activities in South Carolina. As this report will show, these creative individuals and enterprises exert a strong impact on the state’s economic base. Like other drivers of the regional economy, this creative activity revolves around a cluster, or a set of interrelated industries, that thrive in tandem. Along with manufacturing and agriculture, the creative cluster is a catalyst for state and local economic development. The report presents results from an analysis of the South Carolina creative cluster based on 2008 data. For the first time, this report provides a comprehensive summary of the creative economic footprint in South Carolina.

Heterogeneous Catalysts: Design, Applications and Research Insights

The cyclization of pseudoionone yields a mixture of alpha-ionone, beta-ionone and gamma-ionone. By careful control of reagent and reaction conditions, either the alpha- and beta- isomer can be favoured. The alpha-ionone has violet odour and is widely used in perfumery and flavours. beta-Ionone is the main precursor of Vitamin A and beta-carotene. Traditionally, strong homogeneous catalysts, like sulphuric acid and phosphoric acid have been used. These problems can be overcome by the use of solid acid catalysts. This work reports the cyclization of pseudoionone over USY zeolites, at 80ºC. USY It is observed that the initial activity increases with the Si/Al ratio of zeolite until a maximum, which is obtained with USY3. With higher Si/Al ratio, a decrease in the catalytic activity is observed. Selectivity to ionone isomers is around 42 %, at 75% of pseudoionone conversion, after 24 h of reaction. USY3 zeolite was reused four times with the same catalyst sample in the same condicions. It was observed a stabilization of the catalytic activity, after the second use.