Nitrogen incorporation into tetrahedral hydrogenated amorphous carbon

Structural changes induced by the incorporation of nitrogen into ta-C : H films have been studied by Electron Energy Loss Spectroscopy, X-Ray Photoelectron Spectroscopy, Fourier Transformed Infrared Spectroscopy and Ultraviolet-Visible Spectroscopy. ta-C:H films have been synthesised using a low pressure Electron Cyclotron Wave Resonance (ECWR) source which provides a plasma beam with a high degree of ionisation and dissociation. Nitrogen was incorporated by adding N2 to the C2H2 plasma used for the deposition of ta-C : H films. The N/C atomic ratio in the films rises rapidly until the N2/C2H2 gas ratio reaches three, and then increases more gradually, while the deposition rate decreases steeply. Chemical sputtering of the forming films and the formation of molecular nitrogen within the films limit the maximum nitrogen content to about N/C = 0.6. For low nitrogen content the films retain their diamond-like properties, however as N/C atomic ratio increases, a polymeric-like material is formed, with >C=N- structures and terminating C=N and NH groups that decrease the connectivity of the network.

Étude préliminaire sur l'incorporation de liants dans un aliment composé pour poisson d'élevage en Côte d'Ivoire

Artificial feeding constitutes a very important aspect for intensive fish culture. Then, the physical properties, particularly water stability of feed, wider influence the fish production. By trying to find some answers to these problems, a preliminary study on water stability has been conducted at the LAYO aquaculture research station. This work consisted in incorporating different types of binders available in tropical countries in fish pellets of 3.5 mm and 6.0 mm diameters in order to identify an efficient binder allowing the improvement of the water stability of feed. From this experiment, it comes out that the use of wheat flour (A1) gives excellent quality pellets followed by cassava flour residue (A3). Moreover, this study shows that it exists an influence of the diameter on the crumbling of the pellets.

Studies on arsenical creosote as a wood preservative for marine structures. Part 1. Incorporation of arsenic in creosote at various temperatures

A detailed study of the fortification of normal creosote and low temperature creosote with As sub(2) O sub(3) at 40°C, 50°C, 60°C, 70°C, 80°C and 90°C was carried out. When compared to normal creosote, low temperature creosote has been found to combine more easily with As sub(2) O sub(3) when temperature was . raised from 40 to 90°C. The incorporated arsenic values obtained shows that low temperature creosote with high phenolic content, retains considerably more As sub(2) O sub(3) and a maximum of 0.2180% w/w can be incorporated in low temperature creosote at 90°C.

Application of whey protein incorporation with Cinnamon oil as a preservative in Huse huso fillet under chilled storage condition

Biodegradable protein-based film was developed by incorporating cinnamon essential oil (CEO) into whey protein concentrate (WPC) at level of 0.8% and 1.5% v/v. Then physical and mechanical properties of the films were evaluated. Adding CEO to the WPC matrix decreased the water vapour permeability of the films and water solubility. Films containing CEO showed significant antibacterial activity both gram-positive and gram-negative strains and exhibited significant inhibitory effect on the studied fungi. In continue, the effect of whey coating and whey coating incorporated with 1.5% CEO on quality and shelf life of Huso huso fillet during refregrated (4±1°C) storage period were also investigated. The control and treated fish samples were analyzed for microbiological (total viable count, psychrophilic counts), chemical (PV, TBA, FFA, pH, TVB-N), and sensory characteristics in 4-day intervals up of microbial, chmical and sensoy analyses indicated lower levels of PV, TBA, FFA, pH, TVB-N in coasted sampels and specially, those with CEO while were kept in refrigerator. Based on results, whey protein edible coating contain 1.5% cinnamon essential oil could enhance preserving ability Huso huso during storage cold.

Fluorine redistribution and incorporation during solid phase epitaxy of preamorphized Si

The redistribution of fluorine during solid phase epitaxial regrowth (SPER) of preamorphized Si has been experimentally investigated, explained, and simulated, for different F concentrations and temperatures. We demonstrate, by a detailed analysis and modeling of F secondary ion mass spectrometry chemical-concentration profiles, that F segregates in amorphous Si during SPER by splitting in three possible states: (i) a diffusive one that migrates in amorphous Si; (ii) an interface segregated state evidenced by the presence of a F accumulation peak at the amorphous-crystal interface; (iii) a clustered F state. The interplay among these states and their roles in the F incorporation into crystalline Si are fully described. It is shown that diffusive F migrates by a trap limited diffusion mechanism and also interacts with the advancing interface by a sticking-release dynamics that regulates the amount of F segregated at the interface. We demonstrate that this last quantity determines the regrowth rate through an exponential law. On the other hand we show that neither the diffusive F nor the one segregated at the interface can directly incorporate into the crystal but F has to cluster in the amorphous phase before being incorporated in the crystal, in agreement with recent experimental observations. The trends of the model parameters as a function of the temperature are shown and discussed obtaining a clear energetic scheme of the F redistribution and incorporation in preamorphized Si. The above physical understanding and the model could have a strong impact on the use of F as a tool for optimizing the doping profiles in the fabrication of ultrashallow junctions. © 2010 The American Physical Society.

BrdU-Hoechst-Giemsa方法的进一步改进以及青鱼和草鱼复制带核型的研究

对BrdU-Hoechst-Giemsa方法进行了一定的改进和补充;并将它应用于青鱼和草鱼的核型研究中。实验进一步阐明,BrdU-Hoechst-Giemsa方法的关键性步骤之一是要先测算实验鱼的细胞周期;BrdU、AMD、Hoechst 33258,EB和AO虽都有抑制鱼类染色体浓缩、促进染色体分带的作用,但其中以DNA碱基特异性给合物BrdU、AMD和Hoechst 33258较佳,特别用AMD和Hoechst 33258同时处理活细胞的分带效果最好。

Role of interface dipole in metal gate/high-k effective work function modulation by aluminum incorporation

The interface dipole and its role in the effective work function (EWF) modulation by Al incorporation are investigated. Our study shows that the interface dipole located at the high-k/SiO2 interface causes an electrostatic potential difference across the metal/high-k interface, which significantly shifts the band alignment between the metal and high-k, consequently modulating the EWF. The electrochemical potential equalization and electrostatic potential methods are used to evaluate the interface dipole and its contribution. The calculated EWF modulation agrees with experimental data and can provide insight to the control of EWF in future pMOS technology.

Deposition of p-type nc-SiC : H thin films with subtle carbon incorporation for applications in p-i-n solar cells

This paper presents a detailed study on the effects of carbon incorporation and substrate temperature on structural, optical, and electrical properties of p-type nanocrystalline amorphous silicon films. A p-nc-SiC: H thin film with optical gap of 1.92 eV and activation energy of 0.06 eV is obtained through optimizing the plasma parameters. By using this p-type window layer, single junction diphasic nc-SiC : H/a-Si : H solar cells have been successfully prepared with a V-oc of 0.94 eV.

Effect of Al incorporation on the AlGaN growth by metalorganic chemical vapor deposition

The effect of Al incorporation on the AlGaN growth by metalorganic chemical vapor deposition is investigated. With the increase of trimethylalluminum (TMAl) flux, the crystal quality becomes worse, and the epilayer surface becomes rougher. An interesting phenomenon is that the growth rate of AlGaN decrease with increasing TMAl flux, which is opposite to the AlN growth rate dependence on the TMAl flux. All these effects are attributed to the different properties of At atoms due to the higher bond strength of Al-N compared with Ga-N, which lead to lower surface mobility and stronger competitive ability of Al atoms during the growth. The enhancement of the surface mobility of Al is especially important for improving the quality of AlGaN. (c) 2006 Elsevier B.V. All rights reserved.