The roles of feature-specific task set and bottom-up salience in attentional capture: An ERP study

We investigated the roles of top-down task set and bottom-up stimulus salience for feature-specific attentional capture. Spatially nonpredictive cues preceded search arrays that included a color-defined target. For target-color singleton cues, behavioral spatial cueing effects were accompanied by cueinduced N2pc components, indicative of attentional capture. These effects were only minimally attenuated for nonsingleton target-color cues, underlining the dominance of top-down task set over salience in attentional capture. Nontarget-color singleton cues triggered no N2pc, but instead an anterior N2 component indicative of top-down inhibition. In Experiment 2, inverted behavioral cueing effects of these cues were accompanied by a delayed N2pc to targets at cued locations, suggesting that perceptually salient but task-irrelevant visual events trigger location-specific inhibition mechanisms that can delay subsequent target selection.

Bottom-up, not top-down, modulation of imitation by human and robotic models

Visual observation of human actions provokes more motor activation than observation of robotic actions. We investigated the extent to which this visuomotor priming effect is mediated by bottom-up or top-down processing. The bottom-up hypothesis suggests that robotic movements are less effective in activating the ‘mirror system’ via pathways from visual areas via the superior temporal sulcus to parietal and premotor cortices. The top-down hypothesis postulates that beliefs about the animacy of a movement stimulus modulate mirror system activity via descending pathways from areas such as the temporal pole and prefrontal cortex. In an automatic imitation task, subjects performed a prespecified movement (e.g. hand opening) on presentation of a human or robotic hand making a compatible (opening) or incompatible (closing) movement. The speed of responding on compatible trials, compared with incompatible trials, indexed visuomotor priming. In the first experiment, robotic stimuli were constructed by adding a metal and wire ‘wrist’ to a human hand. Questionnaire data indicated that subjects believed these movements to be less animate than those of the human stimuli but the visuomotor priming effects of the human and robotic stimuli did not differ. In the second experiment, when the robotic stimuli were more angular and symmetrical than the human stimuli, human movements elicited more visuomotor priming than the robotic movements. However, the subjects’ beliefs about the animacy of the stimuli did not affect their performance. These results suggest that bottom-up processing is primarily responsible for the visuomotor priming advantage of human stimuli.

Bottom-up planning and the future of planning education in India

The article discusses normative guidelines for reorienting planning education in India within the context of the immensely influential Constitutional Amendment Act of 1993. First, it briefly sketches the status of planning education at present in India, in relation to the role of planners in planning practice. It then descibes the changes that have taken place in general, following the Constitutional Amendment Act, dwelling more on the specific changes within the State of Kerala. The implications of these for planning education in general are then discussed normatively, highlighting three areas that need immediate attention from the planning academic community.

Race-to-the-bottom or -top at home or abroad: Health and safety standards and the multinational firm

We develop a model to illustrate potential complexities in the relationship between corporate geographical diversification and the health and safety (H&S) standards set in national jurisdictions. A firm, that initially has a plant in its home country, may choose to also have one or two foreign plants in order to improve its bargaining position versus local governments, and so ensure reduced H&S standards, i.e. a race-to-the-bottom. However, contrary to the main focus of the popular debate on this topic, we note the potential for the race-to-the-bottom tendency to be exerted on H&S standards in the multinational company’s home rather than host country, and also for an upward push on H&S to instead result.

Processes controlling surface, bottom and lateral melt of Arctic sea ice in a state of the art sea ice model

We present a modelling study of processes controlling the summer melt of the Arctic sea ice cover. We perform a sensitivity study and focus our interest on the thermodynamics at the ice–atmosphere and ice–ocean interfaces. We use the Los Alamos community sea ice model CICE, and additionally implement and test three new parametrization schemes: (i) a prognostic mixed layer; (ii) a three equation boundary condition for the salt and heat flux at the ice–ocean interface; and (iii) a new lateral melt parametrization. Recent additions to the CICE model are also tested, including explicit melt ponds, a form drag parametrization and a halodynamic brine drainage scheme. The various sea ice parametrizations tested in this sensitivity study introduce a wide spread in the simulated sea ice characteristics. For each simulation, the total melt is decomposed into its surface, bottom and lateral melt components to assess the processes driving melt and how this varies regionally and temporally. Because this study quantifies the relative importance of several processes in driving the summer melt of sea ice, this work can serve as a guide for future research priorities.

Coordination, inclusiveness and wage inequality between median and bottom income workers

What explains cross-national variation in wage inequality? Research in comparative political economy stresses the importance of the welfare state and wage coordination in reducing not only disposable income inequality but also gross earnings inequality. However, the cross-national variation in gross earnings inequality between median and low income workers is at odds with this conventional wisdom: the German coordinated market economy is now more unequal in this type of inequality than the UK, a liberal market economy. To solve this puzzle, I argue that non-inclusive coordination benefits median but not bottom income workers and is as a result associated with higher – rather than lower - wage inequality. I find support for this argument using a large N quantitative analysis of wage inequality in a panel of Western European countries. Results are robust to the inclusion of numerous controls, country fixed effects, and also hold with a sample of OECD countries. Taken together these findings force us to reconsider the relationship between coordination and wage inequality at the bottom of the income distribution.

Identifiering av parametrar till ackumulatortanken Solus1050 från consolar - en metodbeskrivning

This report describes the work done creating a computer model of a kombi tank from Consolar. The model was created with Presim/Trnsys and Fittrn and DF were used to identify the parameters. Measurements were carried out and were used to identify the values of the parameters in the model. The identifications were first done for every circuit separately. After that, all parameters are normally identified together using all the measurements. Finally the model should be compared with other measurements, preferable realistic ones. The two last steps have not yet been carried out, because of problems finding a good model for the domestic hot water circuit.The model of the domestic hot water circuit give relatively good results for low flows at 5 l/min, but is not good for higher flows. In the report suggestions for improving the model are given. However, there was not enough time to test this within the project as much time was spent trying to solve problems with the model crashing. Suggestions for improving the model for the domestic circuit are given in chapter 4.4. The improved equations that are to be used in the improved model are given by equation 4.18, 4.19 and 4.22.Also for the boiler circuit and the solar circuit there are improvements that can be done. The model presented here has a few shortcomings, but with some extra work, an improved model can be created. In the attachment (Bilaga 1) is a description of the used model and all the identified parameters.A qualitative assessment of the store was also performed based on the measurements and the modelling carried out. The following summary of this can be given: Hot Water PreparationThe principle for controlling the flow on the primary side seems to work well in order to achieve good stratification. Temperatures in the bottom of the store after a short use of hot water, at a coldwater temperature of 12°C, was around 28-30°C. This was almost independent of the temperature in the store and the DHW-flow.The measured UA-values of the heat exchangers are not very reliable, but indicates that the heat transfer rates are much better than for the Conus 500, and in the same range as for other stores tested at SERC.The function of the mixing valve is not perfect (see diagram 4.3, where Tout1 is the outlet hot water temperature, and Tdhwo and Tdhw1 is the inlet temperature to the hot and cold side of the valve respectively). The outlet temperature varies a lot with different temperatures in the storage and is going down from 61°C to 47°C before the cold port is fully closed. This gives a problem to find a suitable temperature setting and gives also a risk that the auxiliary heating is increased instead of the set temperature of the valve, when the hot water temperature is to low.Collector circuitThe UA-value of the collector heat exchanger is much higher than the value for Conus 500, and in the same range as the heat exchangers in other stores tested at SERC.Boiler circuitThe valve in the boiler circuit is used to supply water from the boiler at two different heights, depending on the temperature of the water. At temperatures from the boiler above 58.2°C, all the water is injected to the upper inlet. At temperatures below 53.9°C all the water is injected to the lower inlet. At 56°C the water flow is equally divided between the two inlets. Detailed studies of the behaviour at the upper inlet shows that better accuracy of the model would have been achieved using three double ports in the model instead of two. The shape of the upper inlet makes turbulence, that could be modelled using two different inlets. Heat lossesThe heat losses per m3 are much smaller for the Solus 1050, than for the Conus 500 Storage. However, they are higher than those for some good stores tested at SERC. The pipes that are penetrating the insulation give air leakage and cold bridges, which could be a major part of the losses from the storage. The identified losses from the bottom of the storage are exceptionally high, but have less importance for the heat losses, due to the lower temperatures in the bottom. High losses from the bottom can be caused by air leakage through the insulation at the pipe connections of the storage.

Relação entre a cultura organizacional e os indicadores de desempenho econômico, ambiental, e social de sustentabilidade do triple bottom line (3BL): um estudo nas companhias de energia elétrica

Tese apresentada ao Programa de Pós-Graduação em Administração da Universidade Municipal de São Caetano do Sul para obtenção do título de Doutora em Administração

Uma abordagem Bottom-UP para a integração semântica de esquemas XML

XML (eXtensibile Markup Language) é um padrão atual para representação e intercâmbio dos semi-estruturados na Web. Dados semi-estruturados são dados não convencionais cujas instâncias de uma mesma fonte de dados podem ter representações altamente heterogêneas. Em função isto, um esquema para estes dados tende a ser extenso para suportar todas as alternativas de representação que um dado pode assumir. Parte do grande volume de dados disponível hoje na Web é composto por fontes de dados heterogêneas XML sobre diversos domínios do conhecimento. Para realizar o acesso a estas fontes, aplicações na Web necessitam de um mecanismo de integração de dados. O objetivo principal deste mecanismo é disponibilizar um esquema de dados global representativo dos diversos esquemas XML das fontes de dados. Com base neste esquema global, consultas são formuladas, traduzidas para consultas sobre os esquemas XML, executadas nas fontes de dados e os resultados retornados à aplicação. Esta tese apresenta uma abordagem para a integração semântica de esquemas XML relativos a um domínio de aplicação chamada BInXS. BInXS adota um processo bottom-up de integração, no qual o esquema global é definido para um conjunto de esquemas XML representadas atrtavés de DTDs (Document Type Definitions). A vantagem do processo bottom-up é que todas as informações dos esquemas XML são consideradas no esquema global. Desta forma, toda a informação presente nas fontes de dados pode ser consultada. O processo de integração de BInXS é baseado em um conjunto de regras e algoritmos que realizam a cnversão de cada DTD para um esquema canônico conceitual e a posterior integração semântica propriamente dita destes esquemas canônicos. O processo é semi-automático pois considera uma eventual intervenção de um usuário especialista no domínio para validar ou confirmar alternativas de resultado produzidas automaticamente. Comparada com trabalhos relacionados, BInXS apresenta as seguintes contribuições: (i) uma representação canônica conceitual para esquemas XML que é o resultado de uma anállise detalhada do modelo XML; (ii) um étodo de unificação que lida com as particularidades da integração de dados semi-estruturados e; (iii) uma estratégia de mapeamento baseada em expressões de consulta XPath que possibilita uma tradução simples de consultas globais para consultas a serem executadas nas fontes de dados XML.

Brachyuran soft-bottom assemblage from marine shallow waters in the southeastern Brazilian littoral.

The present investigation examined the assemblages of brachyuran crabs in three bays of southeastern So Paulo State, analyzing the numbers of species and individuals, biomass, and diversity. The crabs were collected monthly in Ubatumirim, Ubatuba, and Mar Virado bays in the Ubatuba region over 2 years (1998 and 1999). In each bay, six tows were made from a fishing boat. A total of 39,820 specimens, representing 11 super families, 39 genera, and 65 species of brachyurans, were obtained. The mean number of specimens and biomass varied seasonally, which can be mainly related with the population tendencies of two dominant species in the area (Callinectes ornatus and Hepatus pudibundus). The highest numbers of individuals and species were found in Ubatuba Bay, followed by Ubatumirim and Mar Virado. The highest diversity index was estimated for Ubatumirim (H' = 2.44), followed by Ubatuba (H' = 2.37) and Mar Virado (H' = 1.86). In general, the coastal region supported high abundance and species richness concerning brachyurans, with high diversity indices, probably because of its more-heterogeneous substrate, which may afford more refuges for certain species. These results suggested that environmental conditions in this area, although they showed certain differences, are favorable for the establishment and development of a diverse brachyuran guild.

Leakage current behavior of Bi3.25La0.75Ti3O12 ferroelectric thin films deposited on different bottom electrodes

Bi3.25La0.75Ti3O12 (BLT) thin films were grown on LaNiO3 (LNO), RuO2 (RuO2) and La0.5Sr0.5CoO3 (LSCO) bottom electrodes by using the polymeric precursor method and microwave furnace. The bottom electrode is found to be an important parameter which affects the crystallization, morphology and leakage current behaviors. The XRD results clearly show that film deposited on LSCO electrode favours the growth of (117) oriented grains whereas in films deposited on LNO and RuO2 the growth of (001) oriented grains dominated. The film deposited on LSCO has a plate-like grain structure, and its leakage current behavior is in agreement with the prediction of the space-charge-limited conduction model. on the other hand, the films deposited on RuO2 and LNO electrodes present a rounded grain shape with some porosity, and its high field conduction is well explained by the Schottky and Poole-Frenkel emission models. The remanent polarization (P-r) and the drive voltage (V-c) were in the range of 11-23 mu C cm(-2) and 0.86-1.56 V, respectively, and are better than the values found in the literature. (c) 2007 Published by Elsevier B.V.