基于结构分析地震资料去噪方法研究

With the development of oil and gas exploration, the exploration of the continental oil and gas turns into the exploration of the subtle oil and gas reservoirs from the structural oil and gas reservoirs in China. The reserves of the found subtle oil and gas reservoirs account for more than 60 percent of the in the discovered oil and gas reserves. Exploration of the subtle oil and gas reservoirs is becoming more and more important and can be taken as the main orientation for the increase of the oil and gas reserves. The characteristics of the continental sedimentary facies determine the complexities of the lithological exploration. Most of the continental rift basins in East China have entered exploration stages of medium and high maturity. Although the quality of the seismic data is relatively good, this areas have the characteristics of the thin sand thickness, small faults, small range of the stratum. It requests that the seismic data have high resolution. It is a important task how to improve the signal/noise ratio of the high frequency of seismic data. In West China, there are the complex landforms, the deep embedding the targets of the prospecting, the complex geological constructs, many ruptures, small range of the traps, the low rock properties, many high pressure stratums and difficulties of boring well. Those represent low signal/noise ratio and complex kinds of noise in the seismic records. This needs to develop the method and technique of the noise attenuation in the data acquisition and processing. So that, oil and gas explorations need the high resolution technique of the geophysics in order to solve the implementation of the oil resources strategy for keep oil production and reserves stable in Ease China and developing the crude production and reserves in West China. High signal/noise ratio of seismic data is the basis. It is impossible to realize for the high resolution and high fidelity without the high signal/noise ratio. We play emphasis on many researches based on the structure analysis for improving signal/noise ratio of the complex areas. Several methods are put forward for noise attenuation to truly reflect the geological features. Those can reflect the geological structures, keep the edges of geological construction and improve the identifications of the oil and gas traps. The ideas of emphasize the foundation, give prominence to innovate, and pay attention to application runs through the paper. The dip-scanning method as the center of the scanned point inevitably blurs the edges of geological features, such as fault and fractures. We develop the new dip scanning method in the shap of end with two sides scanning to solve this problem. We bring forward the methods of signal estimation with the coherence, seismic wave characteristc with coherence, the most homogeneous dip-sanning for the noise attenuation using the new dip-scanning method. They can keep the geological characters, suppress the random noise and improve the s/n ratio and resolution. The rutine dip-scanning is in the time-space domain. Anew method of dip-scanning in the frequency-wavenumber domain for the noise attenuation is put forward. It use the quality of distinguishing between different dip events of the reflection in f-k domain. It can reduce the noise and gain the dip information. We describe a methodology for studying and developing filtering methods based on differential equations. It transforms the filtering equations in the frequency domain or the f-k domain into time or time-space domains, and uses a finite-difference algorithm to solve these equations. This method does not require that seismic data be stationary, so their parameters can vary at every temporal and spatial point. That enhances the adaptability of the filter. It is computationally efficient. We put forward a method of matching pursuits for the noise suppression. This method decomposes any signal into a linear expansion of waveforms that are selected from a redundant dictionary of functions. These waveforms are chosen in order to best match the signal structures. It can extract the effective signal from the noisy signal and reduce the noise. We introduce the beamforming filtering method for the noise elimination. Real seismic data processing shows that it is effective in attenuating multiples and internal multiples. The s/n ratio and resolution are improved. The effective signals have the high fidelity. Through calculating in the theoretic model and applying it to the real seismic data processing, it is proved that the methods in this paper can effectively suppress the random noise, eliminate the cohence noise, and improve the resolution of the seismic data. Their practicability is very better. And the effect is very obvious.

What students can tell about lecturers when they are teaching: manifestations of confident and under-confident lecturers

Delivering a lecture requires confidence, a sound knowledge and well developed teaching skills (Cooper and Simonds, 2007, Quinn and Hughes, 2007). However, practitioners who are new to lecturing large groups in higher education may initially lack the confidence to do so which can manifest itself in their verbal and non-verbal cues and the fluency of their teaching skills. This results in the perception that students can identify the confident and non-confident teacher during a lecture (Street, 2007) and so potentially contributing to a lecturer’s level of anxiety prior to, and during, a lecture. Therefore, in the current educational climate of consumerisation, with the increased evaluation of teaching by students, having the ability to deliver high-quality, informed, and interesting lectures assumes greater significance for both lecturers and universities (Carr, 2007; Higher Education Founding Council 2008, Glass et al., 2006). This paper will present both the quantitative and qualitative data from a two-phase mixed method study with 75 nurse lecturers and 62 nursing students in one university in the United Kingdom. The study investigated the notion that lecturing has similarities to acting (Street, 2007). The findings presented here are concerned with how students perceived lecturers’ level of confidence and how lecturers believed they demonstrated confidence. In phase one a specifically designed questionnaire was distributed to both lecturers and students and a response rate of 91% (n=125) was achieved, while in phase two 12 in-depth semi-structured interviews were conducted with lecturers. Results suggested that students in a lecture could identify if the lecturer was confident or not by the way they performed a lecture. Students identified 57 manifestations of non-confidence and lecturers identified 85, while 57 manifestations of confidence were identified by students and 88 by lecturers. Overall, these fell into 12 main converse categories, ranging from body language to the use of space within the room. Both students and lecturers ranked body language, vocal qualities, delivery skills, involving the students and the ability to share knowledge as the most evident manifestations of confidence. Elements like good eye contact, smiling, speaking clearly and being fluent in the use of media recourses where all seen as manifestations confidence, conversely if these were poorly executed then a presentation of under confidence was evident. Furthermore, if the lecturer appeared enthusiastic it was clearly underpinned by the manifestation of a highly confidence lecturer who was secure in their knowledge base and teaching abilities: Some lecturers do appear enthusiastic but others don’t. I think the ones that do know what they are talking about, you can see it in their voice and in their lively body language. I think they are also good at involving the students even. I think the good ones are able to turn boring subjects into lively and interesting ones. (Student 50) Significantly more lecturers than students felt the lecturer should appear confident when lecturing. The lecturers stated it was particularly important to do so when they did not feel confident, because they were concerned with appearing capable. It seems that these students and lecturers perceived that expressive and apparently confident lecturers can make a positive impact on student groups in terms of involvement in lectures; the data also suggested the reverse, for the under confident lecturer. Findings from phase two indicated that these lecturers assumed a persona when lecturing, particularly, but not exclusively, when they were nervous. These lecturers went through a process of assuming and maintaining this persona before and during a lecture as a way of promoting their internal perceptions of confidence but also their outward manifestation of confidence. Although assuming a convincing persona may have a degree of deception about it, providing the knowledge communicated is accurate, the deception may aid rather than hinder learning, because enhances the delivery of a lecture. Therefore, the deception of acting a little more confidently than one feels might be justified when the lecturer knows the knowledge they are communicating is correct, unlike the Dr Fox Effect where the person delivering a lecture is an actor and does not know the subject in any detail or depth and where the deception to be justified (Naftulin, et al., 1973). In conclusion, these students and lecturers perceive that confident and enthusiastic lecturers communicate their passion for the subject in an interesting and meaningful manner through the use of their voice, body, space and interactions in such a way that shows confidence in their knowledge as well as their teaching abilities. If lecturers, therefore, can take a step back to consider how they deliver lectures in apparently confident ways this may increase their ability to engage their students and not only help them being perceived as good lecturers, but also contribute to the genuine act of education.

Stable GeV Ion Beam Acceleration from Thin Foils by Circularly Polarized Laser Pulses

A stable relativistic ion acceleration regime for thin foils irradiated by circularly polarized laser pulses is suggested. In this regime, the "light-sail" stage of radiation pressure acceleration for ions is smoothly connected with the initial relativistic "hole-boring" stage, and a defined relationship between laser intensity I(0), foil density n(0), and thickness l(0) should be satisfied. For foils with a wide range of n(0), the required I(0) and l(0) for the regime are theoretically estimated and verified with the particle-in-cell code ILLUMINATION. It is shown for the first time by 2D simulations that high-density monoenergetic ion beams with energy above GeV/u and divergence of 10 degrees are produced by circularly polarized lasers at intensities of 10(22) W/cm(2), which are within reach of current laser systems.

A Framework for the Evaluation of Digital Musical Instruments

At the outset of a discussion of evaluating digital musical instruments, that is to say instruments whose sound generators are digital and separable though not necessarily separate from their control interfaces (Malloch, 2006), it is reasonable to ask what the term evaluation in this context really means. After all, there may be many perspectives from which to view the effectiveness or otherwise of the instruments we build. For most performers, performance on an instrument becomes a means of evaluating how well it functions in the context of live music making, and their measure of success is the response of the audience to their performance. Audiences evaluate performances on the basis of how engaged they feel they have been by what they have seen and heard. When questioned, they are likely to describe good performances as “exciting,” “skillful,” “musical.” Bad performances are “boring,” and those which are marred by technical malfunction are often dismissed out of hand. If performance is considered to be a valid means of evaluating a musical instrument, then it follows that, for the field of DMI design, a much broader definition of the term “evaluation” than that typically used in human-computer interaction (HCI) is required to reflect the fact that there are a number of stakeholders involved in the design and evaluation of DMIs. In addition to players and audiences, there are also composers, instrument builders, component manufacturers, and perhaps even customers, each of whom will have a different concept of what is meant by “evaluation.”

Dominance of Radiation Pressure in Ion Acceleration with Linearly Polarized Pulses at Intensities of 10(21) W cm(-2)

A novel regime is proposed where, by employing linearly polarized laser pulses at intensities 10(21) W cm(-2) (2 orders of magnitude lower than discussed in previous work [T. Esirkepov et al., Phys. Rev. Lett. 92, 175003 (2004)]), ions are dominantly accelerated from ultrathin foils by the radiation pressure and have monoenergetic spectra. In this regime, ions accelerated from the hole-boring process quickly catch up with the ions accelerated by target normal sheath acceleration, and they then join in a single bunch, undergoing a hybrid light-sail-target normal sheath acceleration. Under an appropriate coupling condition between foil thickness, laser intensity, and pulse duration, laser radiation pressure can be dominant in this hybrid acceleration. Two-dimensional particle-in-cell simulations show that 1.26 GeV quasimonoenergetic C6+ beams are obtained by linearly polarized laser pulses at intensities of 10(21) W cm(-2).

An exploration of seniors’ motivation to use mobile brain-exercise software

This article reports on the development of an iPhone-based brain-exercise tool for seniors involving a series of focus groups (FGs) and field trials (FTs). Four FGs with 34 participants were conducted aimed at understanding the underlying motivational and de-motivational factors influencing seniors’ engagement with mobile brain-exercise software. As part of the FGs, participants had approximately 40 minutes hands-on experience with commercially available brain-exercise software. A content analysis was conducted on the data resulting in a ranking of 19 motivational factors, of which the top three were challenge, usefulness and familiarity and 15 de-motivational factors, of which the top-three were usability issues, poor communication and games that were too fast. Findings were used to inform the design of three prototype brain-exercise games for the iPhone contained within one overall application, named Brain jog. Subsequently, two FTs were conducted using Brain jog to investigate the part that time exposure has to play in shaping the factors influencing engagement. New factors arose with respect to the initial FGs including the motivational factor feedback and the de-motivational factor boring. The results of this research provide valuable guidelines for the design and evaluation of mobile brain-exercise software for seniors.

Laboratory tests to study the influence of rock stress confinement on the performances of TBM discs in tunnels

To clarify some aspects of rock destruction with a disc acting on a high confined tunnel face, a series of tests were carried out to examine fracture mechanisms under an indenter that simulates the tunnel boring machine (TBM) tool action, in the presence of an adjacent groove, when a state of stress (lateral confinement) is imposed on a rock sample. These tests proved the importance of carefully establishing the optimal distance of grooves produced by discs acting on a confined surface, and the value (as a mere order of magnitude) of the increase of the thrust to produce the initiation of chip formation, as long as the confinement pressure becomes greater. © University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg 2011.

Parametric scans of HB and LS-RPA regimes employing Petawatt laser

By contrast to the Target Normal Sheath acceleration (TNSA) mechanism [1], Radiation Pressure Acceleration (RPA) is currently attracting a substantial amount of experimental [2,3] and theoretical [4-6] attention worldwide due to its superior scaling in terms of ion energy and laser-ion conversion efficiency. Employing Vulcan Petawatt lasers of the Rutherford Appleton Laboratory, UK, both the Hole-boring (HB) and the Light-Sail (LS) regimes of the RPA have been extensively explored. When the target thickness is of the order of hole-boring velocity times the laser pulse duration, highly collimated plasma jets of near solid density are ejected from the foil, lasting up to ns after the laser interaction. By changing the linear polarisation of the laser to circular, improved homogeneity in the jet's spatial density profile is achieved which suggests more uniform and sustained radiation pressure drive on target ions. By decreasing the target areal density or increasing irradiance on the target, the LS regime of the RPA is accessed where relatively high flux (~ 1012 particles/MeV/Sr) of ions are accelerated to ~ 10 MeV/nucleon energies in a narrow energy bandwidth. The ion energy scaling obtained from the parametric scans agrees well with theoretical estimation based on RPA mechanism and the narrow bandwidth feature in the ion spectra is studied by 2D particle-in-simulations.

Bursaphelenchus pinophilus Brzeski & Baujard, 1997 (Nematoda: Parasitaphelenchinae) associated with nematangia on Pityogenes bidentatus (Herbst, 1783) (Coleoptera: Scolytinae), from the Czech Republic

The occurrence of Bursaphelenchus species in the Czech Republic is poorly known, the first report of the genus being made by Kubátová et al. (2000) who reported the association of B. eremus with the hyphomycetous microfungus, Esteya vermicola, and the bark beetle, Scolytus intricatus, collected from Quercus robur, in central Bohemia. To date, four other species have been reported from the country, namely B. fungivorus (Braasch et al., 2002), B. hofmanni (see Braasch, 2001), B. mucronatus (see Braasch, 2001) and B. vallesianus (Gaar et al., 2006). More recently, a survey for Bursaphelenchus species associated with bark- and wood-boring insects in the Czech Republic identified B. pinophilus Brzeski & Baujard, 1997 from the Moravia region. Although this represents a new country record, it was also associated with nematangia on the hind wings of a new insect vector. A total of 404 bark- and wood-boring insects were collected from declining or symptomatic trees and screened for the presence of Bursaphelenchus. Bark and longhorn beetles were captured manually after debarking parts of the trunk displaying symptoms of insect attacks. Longhorn beetle larvae were also collected together with logs cut from the trunk. Logs were kept at room temperature in the laboratory until insect emergence. Each adult insect was individually dissected in water and examined for nematodes. All nematodes resembling dauer juveniles of Bursaphelenchus were collected and identified by molecular characterisation using a region of ribosomal DNA (rDNA) containing the internal transcribed spacer regions ITS1 and ITS2. ITS-RFLP analyses using five restriction enzymes (AluI, HaeIII, HinfI, MspI, RsaI) were performed to generate the species-specific profile according to Burgermeister et al. (2009). Species identification was also confirmed by morphological data after culture of the dauers on Botrytis cinerea Pers. ex Ft., growing in 5% malt extract agar. During this survey, only species belonging to the Curculionidae, subfamily Scolytinae, revealed the presence of nematodes belonging to Bursaphelenchus. Dauers of this genus were found aggregated under the elytra in nematangia formed at the root of the hind wings (Fig. 1). The dauers were identified from 12 individuals of Pityogenes bidentatus (Herbst, 1783) (Coleoptera: Scolytinae) collected under the bark of Pinus sylvestris trunks. Each insect carried ca 10-100 dauers. The ITS-RFLP patterns of the dauers so obtained confirmed the identification of B. pinophilus associated with this insect species. Bursaphelenchus pinophilus has been found mainly in Europe and has been reported from various countries such as Poland (Brzeski & Baujard, 1997), Germany (Braasch, 2001), and Portugal (Penas et al., 2007). The recent detection of this species associated with dead P. koraiensis in Korea (Han et al., 2009) expands its geographical distribution and potential importance. It has been found associated only with Pinus species, but very little is known about the insect vector. The bark beetle, Hylurgus ligniperda, was initially suggested as the insect vector by Pe-nas et al. (2006), although the nematode associated with this insect was later reclassified as B. sexdentati by morphological and molecular analysis (Penas et al., 2007). According to the literature, P. bidentatus has been cited as a vector of Ektaphelenchus sp. (Kakuliya, 1966) in Georgia, and an unidentified nematode species in Spain (Roberston et al., 2008). Interestingly, B. pinophilus was found in the nematangia formed at the root of the hind wings of P. bidentatus. Although this phenomenon is not so common in other Bursaphelenchus species, B. rufipennis has been found recently in such a structure on the hind wings of the insect Dendroctonus rufipennis (Kanzaki et al., 2008). Although other nematode species (e.g., Ektaphelenchus spp.) are frequently found associated within the same nematangia (see Kanzaki et al., 2008), in this particular case, only dauers of B. pinophilus were identified. The association between B. pinophilus and P. bidentatus represents the first report of this biological association and the association with the Scolytinae strengthens the tight and specific links between this group of Bursaphelenchus species and members of the Scolytinae (Ryss et al., 2005).

Microtunelação. Aplicação a um caso de obra

Um túnel é uma obra subterrânea dimensionada com o objetivo de satisfazer diversas necessidades num mundo onde o planeamento urbano e a gestão de espaços ganha cada vez mais importância. A execução de este género de obras de engenharia pode ter várias finalidades, que podem ir desde a construção/reabilitação de redes de saneamento, abastecimento de água ou gás (túneis de pequeno diâmetro) até à construção/modernização de redes pedonais, rodoviárias ou ferroviárias, galerias mineiras, tuneis para barragens, etc. (túneis de grande diâmetro). As tuneladoras são uma das ferramentas de desmonte mais utilizadas na execução de obras subterrâneas. Existem no mercado vários tipos de máquinas tuneladoras, a sua escolha e dimensionamento depende de diversos fatores que devem ser cuidadosamente analisados, nomeadamente tipo de terreno a escavar, presença ou não de água na zona de escavação, dureza e/ou abrasividade das formações a atravessar, etc. Será feita uma abordagem aos princípios de funcionamento de este tipo de equipamentos, indicando o seu campo de aplicação dentro da respetiva tecnologia de escavação onde se inserem. Finalmente será desenvolvido o caso da empreitada: “Execução da Travessia do Rio Ave, da Estação Elevatória de Vila do Conde e dos Sistemas Elevatória da Aguçadoura e da Apúlia 4 - AR 44.0.08”, onde em alternativa ao desvio provisório do Rio Ave em Vila do Conde foi projetada a execução de duas travessias no diâmetro 1200 mm, uma delas escavadas maioritariamente em terreno aluvionar brando e a outra em terreno rochoso duro e abrasivo com recurso, em ambos casos, à utilização de máquina tuneladora. Através da avaliação do desempenho do equipamento escolhido para execução de este trabalho será estudada a eficiência da utilização deste tipo de equipamento. Com o objetivo de mostrar os custos associados à execução de obras de escavação subterrânea com recurso a utilização de máquinas tuneladoras, será feita uma análise económica e comparativa relativa aos dois casos de obra apresentados.

A Profile of Gamblers

This Study Presents Both a Comprehensive Survey Jof the Empirical Literature on Gambling and Our Most Recent Research Based on Data Provided by Both Loto-Quebec and Statistics Canada. in Spite of All the Excitement Surrounding the Subject, the Typical Gambler Emerges with the Relatively Boring Image of a Regular, Relatively Lower Paid Blue Or White Collar Worker, Whose Career Stalled, Who Is Relatively Older and Has More Children Than the Rest of the Population. But He Is Not Criminal and Does Not Spend Recklessly. the Game Gives Him Hope, Type of Hope That No Other Existing Spending Opportunities Can Provide. the Study Also Reveals That People Do Not Tell the Truth About Their Spendings on Games of Chance.

Studies on the teredinids of cochin harbour

Teredinids (shipworms), a group of wood boring bivalves occurring in the Cochin Harbour region have been taken up for the eco-physiological studies. On the ecological part, the occurrence, abunance and seasonal intensity of the teredinids in relation to hydrographic conditions have been studied. On the physiological part, salinity tolerance and oxygen consumption of the most commonly occurring shipworms, Nausitcra hedlgyi and Teredo furcifera have been investigated. The hydrographic factors studied are temperature, salinity, dissolved oxygen, phosphate, nitrite, silicate and pH. The variation in temperature is found to be comparatively narrow. But seasonal variation in salinity, dissolved oxygen, phosphate, nitrite and silicate has been observed, with the highest values during the monsoon period. In the case of pH, the minimum value has been obtained during the low saline period and the maximum value, during the high saline period. Of the various hydrographic factors studied, salinity has been found to be the most important fluctuating environmental parameter influencing the life of organisms in the habitat.

Studies on sphaeroma terebrans bate of the port of Cochi

Sphaeroma terebrans Bate, one of the most destructive wood-boring isopod crustacean occurring in the Cochin harbour region was taken up for investigations on its habitat, breeding, attack on timber, salinity tolerance and respiration. The respiration of the animal under different stresses was noted using an instrument fabricated in the laboratory. Of the various hydrographic conditions of the Cochin harbour region studied, salinity is found to be the most fluctuating factor and the variations are largely influenced by the seasonal rain fall from one side and the tidal currents on the other.In spite of the great fluctuations in salinity, Sphaeroma terebrans occurs throughout the year in the Cochin harbour region, though their number varies in different months. Exposure tests show that Sphaeroma terebrans can remain for about 20 to 24 hours outside water in a damp atmosphere.

Retting Of Coconut Husk - A Unique Case Of Water Pollution On The South West Coast Of India

The extensive backwaters of Kerala are the sites for a flourishing cottage industry - the coir industry. This enterprise almost exclusively located along the 590 km coastal belt of Kerala, provides direct employment to over half a million people in the state and produces nearly 90% of the total coir goods in the world. The shallow bays and lagoons of the 30 backwater systems of the state are traditional areas for the retting of coconut husk for the production of the coir fibre. The paper examines the environmental status of the retting grounds in Kerala, in relation to the biotic communities. The study revealed that retting activity has caused large scale organic pollution along with the mass destruction of the flora and fauna, converting sizeable sections of the backwaters into virtual cesspools of foul smelling stagnant waters. High values of hydrogen sulphide, ammonia, BOD5 associated with anoxic conditions and low community diversity of plankton, benthic fauna, fish, shell fish, wood boring and fouling organisms were the outstanding feature of the retting zones.

Randzonenveränderung beim Bohren und ihre Auswirkung auf Folgebearbeitungsverfahren

In der Praxis kommt es bei der spanenden Bearbeitung immer wieder zu großen Standwegunterschieden identischer Werkzeuge bei vordergründig identischen Bearbeitungsrandbedingungen. Insbesondere bei Fertigungsschritten, die das Bohren als Vorbearbeitung erfordern, kommt es gelegentlich zu atypischen Verschleißerscheinungen, die auf das Entstehen einer Neuhärtezone an der Werkstückoberfläche beim Bohren zurückgeführt werden. Grundsätzlich sind Randzonenveränderungen eine Folge der mechanischen und thermischen Beanspruchung bei der Bearbeitung. Beim Eindringen des Schneidkeils kommt es zu Kornverzerrungen, welche die Werkstückhärte bis in eine Tiefe von 40 bis 80 µm erhöhen können. Überdies wird die Randzone des Werkstücks durch den Bearbeitungsvorgang und den Spantransport erhitzt und durch den Kühlschmierstoff bzw. die so genannte Selbstabschreckung im Anschluss sehr schnell abgekühlt. So kann es in Abhängigkeit der Randbedingungen zu Gefügeänderungen mit härtesteigernder (Sekundärabschreckung) oder härtemindernder (Anlasseffekte) Wirkung kommen. Nicht zuletzt beeinflussen beide Beanspruchungsarten auch das Ausmaß der Eigenspannungen in der Werkstückoberfläche. In dieser Arbeit werden die beim Kernlochbohren erzeugten Randzonenveränderungen sowie die Standzeit von Folgebearbeitungswerkzeugen, wie Gewindebohrern und Gewindeformern, und deren Abhängigkeit vom Verschleißzustand des Kernlochbohrers untersucht. Weiterhin werden mit Hilfe einer Energiebilanz die Anteile herausgefiltert, die primär die Eigenschaften der Bohrungsrandzone beeinflussen. Dies geschieht mit Hilfe einer mathematischen Modellierung des Bohrprozesses, in der die Einflüsse der Schneidkantengeometrie, der Schneidkantenverrundung, der Schneidkantenfase sowie des Freiflächenverschleißes berücksichtigt werden.