The Pine Wood Nematode: a personal view

The first report of the disease (“pine wilt disease”) associated with the pinewood nematode, goes back to 1905, when Yano reported an unusual decline of pines from Nagasaki. For a long time thereafter, the cause of he disease was sought, but without success. Because of the large number of insect species that were usually seen around and on infected trees, it had always been assumed that the causal agent would prove to be one of these. However, in 1971, Kiyohara and Tokushike found a nematode of the genus Bursaphelenchus in infected trees. The nematode found was multiplied on fungal culture, inoculated into healthy trees and then re-isolated from the resulting wilted trees. The subsequent published reports were impressive: this Bursaphelenchus species could kill fully-grown trees within a few months in the warmer areas of Japan, and could destroy complete forests of susceptible pine species within a few years. Pinus densiflora, P. thunbergii und P. luchuensis were particularly affected. In 1972, Mamiya and Kiyohara described the new species of nematode extracted from the wood of diseased pines; it was a named Bursaphelenchus lignicolus. Since 1975, the species has spread to the north of Japan, with the exception of the most northerly prefectures. In 1977, the loss of wood in the west of the country reached 80%. Probably as a result of unusually high summer temperatures and reduced rainfall in the years 1978 and 1979, the losses were more than 2 million m3 per year. From the beginning, B. lignicolus was always considered by Japanese scientists to be an exotic pest. But where did it come from? That this nematode could also cause damage in the USA became clear in 1979 when B. lignicolus was isolated in great numbers from wood of a 39 year-old pine tree (Pinus nigra) in Missouri which had suddenly died after the colour of its needles changed to a reddish-brown colour (Dropkin und Foudin, 2 1979). In 1981, B. lignicolus was synonymised by Nickle et al. with B. xylophilus which had been found for the first time in the USA as far back as 1929, and reported by Steiner and Buhrer in 1934. It had originally been named Aphelenchoides xylophilus, the wood-inhabiting Aphelenchoides but was recognised by Nickle, in 1970,to belong in the genus Bursaphelenchus. Its common name in the USA was the "pine wood nematode" (PWN. After its detection in Missouri, it became known that B. xylophilus was widespread throughout the USA and Canada. It occurred there on native species of conifers where, as a rule, it did not show the symptoms of pine wilt disease unless susceptible species were stressed eg., by high temperature. This fact was an illuminating piece of evidence that North America could be the homeland of PWN. Dwinell (1993) later reported the presence of B. xylophilus in Mexico. The main vector of the PWN in Japan was shown to be the long-horned beetle Monochamus alternatus, belonging to the family Cerambycidae. This beetle lays its eggs in dead or dying trees where the developing larvae then feed in the cambium layer. It was already known in Japan in the 19th century but in the 1930s, it was said to be present in most areas of Japan, but was generally uncommon. However, with the spread of the pine wilt disease, and the resulting increase of weakened trees that could act as breeding sites for beetles, the populations of Monochamus spp. increased significantly In North America, other Monochamus species transmit PWN, and the main vector is M. carolinensis. In Japan, there are also other, less efficient vectors in the genus Monochamus. Possibly, all Monochamus species that breed in conifers can transmit the PWN. The occasional transmission by less efficient species of Monochamus or by some of the many other beetle genera in the bark or wood is of little significance. In Europe, M. galloprovincialis and M. sutor transmits the closely related species B. mucronatus. Some speculate that these two insect species are “standing by” and waiting for the arrival of B. xylophilus. In 1982, the nematode was detected and China. It was first found in dead pines near the Zhongshan Monument of Nanjing (CHENG et. al. 1983); 265 trees were then killed by pine wilt disease. Despite great efforts at eradication in China, the nematode spread further and pine wilt disease has been 3 reported from parts of the provinces of Jiangsu, Anhui, Guangdong, Shandong, Zhejiang and Hubei (YANG, 2003). In 1986, the spread of the PWN to Taiwan was discovered and in 1989, the nematode was reported to be present in the Republic of Korea where it had first been detected in Pinus thunbergii and P. densiflora. It was though to have been introduced with packing material from Japan. PWN was advancing. In 1984, B. xylophilus was found in wood chips imported into Finland from the USA and Canada, and this was the impetus to establish phytosanitary measures to prevent any possible spread into Europe. Finland prohibited the import of coniferous wood chips from these sources, and the other Nordic countries soon followed suit. EPPO (the European and Mediterranean Plant Protection Organization) made a recommendation to its member countries in 1986 to refuse wood imports from infested countries. With its Directive of 1989 (77/93 EEC), the European Community (later called the European Union or EU) recognised the potential danger of B. xylophilus for European forests and imposed restrictions on imports into the Europe. PWN was placed on the quarantine list of the EU and also of other European countries. Later, in 1991, a dispensation was allowed by the Commission of the EU(92/13 EEC) for coniferous wood from North America provided that certain specified requirements were fulfilled that would prevent introduction.

Bursaphelenchus pinophilus Brzeski & Baujard, 1997 (Nematoda: Parasitaphelenchinae) associated with nematangia on Pityogenes bidentatus (Herbst, 1783) (Coleoptera: Scolytinae), from the Czech Republic

The occurrence of Bursaphelenchus species in the Czech Republic is poorly known, the first report of the genus being made by Kubátová et al. (2000) who reported the association of B. eremus with the hyphomycetous microfungus, Esteya vermicola, and the bark beetle, Scolytus intricatus, collected from Quercus robur, in central Bohemia. To date, four other species have been reported from the country, namely B. fungivorus (Braasch et al., 2002), B. hofmanni (see Braasch, 2001), B. mucronatus (see Braasch, 2001) and B. vallesianus (Gaar et al., 2006). More recently, a survey for Bursaphelenchus species associated with bark- and wood-boring insects in the Czech Republic identified B. pinophilus Brzeski & Baujard, 1997 from the Moravia region. Although this represents a new country record, it was also associated with nematangia on the hind wings of a new insect vector. A total of 404 bark- and wood-boring insects were collected from declining or symptomatic trees and screened for the presence of Bursaphelenchus. Bark and longhorn beetles were captured manually after debarking parts of the trunk displaying symptoms of insect attacks. Longhorn beetle larvae were also collected together with logs cut from the trunk. Logs were kept at room temperature in the laboratory until insect emergence. Each adult insect was individually dissected in water and examined for nematodes. All nematodes resembling dauer juveniles of Bursaphelenchus were collected and identified by molecular characterisation using a region of ribosomal DNA (rDNA) containing the internal transcribed spacer regions ITS1 and ITS2. ITS-RFLP analyses using five restriction enzymes (AluI, HaeIII, HinfI, MspI, RsaI) were performed to generate the species-specific profile according to Burgermeister et al. (2009). Species identification was also confirmed by morphological data after culture of the dauers on Botrytis cinerea Pers. ex Ft., growing in 5% malt extract agar. During this survey, only species belonging to the Curculionidae, subfamily Scolytinae, revealed the presence of nematodes belonging to Bursaphelenchus. Dauers of this genus were found aggregated under the elytra in nematangia formed at the root of the hind wings (Fig. 1). The dauers were identified from 12 individuals of Pityogenes bidentatus (Herbst, 1783) (Coleoptera: Scolytinae) collected under the bark of Pinus sylvestris trunks. Each insect carried ca 10-100 dauers. The ITS-RFLP patterns of the dauers so obtained confirmed the identification of B. pinophilus associated with this insect species. Bursaphelenchus pinophilus has been found mainly in Europe and has been reported from various countries such as Poland (Brzeski & Baujard, 1997), Germany (Braasch, 2001), and Portugal (Penas et al., 2007). The recent detection of this species associated with dead P. koraiensis in Korea (Han et al., 2009) expands its geographical distribution and potential importance. It has been found associated only with Pinus species, but very little is known about the insect vector. The bark beetle, Hylurgus ligniperda, was initially suggested as the insect vector by Pe-nas et al. (2006), although the nematode associated with this insect was later reclassified as B. sexdentati by morphological and molecular analysis (Penas et al., 2007). According to the literature, P. bidentatus has been cited as a vector of Ektaphelenchus sp. (Kakuliya, 1966) in Georgia, and an unidentified nematode species in Spain (Roberston et al., 2008). Interestingly, B. pinophilus was found in the nematangia formed at the root of the hind wings of P. bidentatus. Although this phenomenon is not so common in other Bursaphelenchus species, B. rufipennis has been found recently in such a structure on the hind wings of the insect Dendroctonus rufipennis (Kanzaki et al., 2008). Although other nematode species (e.g., Ektaphelenchus spp.) are frequently found associated within the same nematangia (see Kanzaki et al., 2008), in this particular case, only dauers of B. pinophilus were identified. The association between B. pinophilus and P. bidentatus represents the first report of this biological association and the association with the Scolytinae strengthens the tight and specific links between this group of Bursaphelenchus species and members of the Scolytinae (Ryss et al., 2005).

Upgrading of suberin from cork and birch outer bark

O trabalho aqui apresentado teve como principal propósito o estudo do potencial da suberina como fonte de produtos de química fina e como precursor de novos materiais macromoleculares de origem renovável. O interesse na suberina reside, não só na sua ubiquidade e nas suas propriedades únicas em termos de composição química e hidrofobicidade, mas também no facto de ser um dos principais componentes macromoleculares dos subprodutos da indústria corticeira de Quercus suber L. no Sul da Europa, e da indústria de pasta de papel do Norte da Europa, que utiliza a Betula pendula Roth como matéria-prima. A primeira parte do presente trabalho consistiu no estudo detalhado da composição química da cortiça de Quercus suber L. e respectivos resíduos industriais bem como da casca de Betula pendula Roth recorrendo a diferentes técnicas de caracterização, nomeadamente GC-MS, IV, RMN de 1H e de 13C, DSC, termomicroscopia, TGA e difracção de raios-X. Os resultados mostraram que os produtos de despolimerização da suberina representam tipicamente uma fracção substancial de todas as amostras. Para além da suberina, foram também identificados nas diversas amostras quantidades variáveis de compostos triterpénicos, lenhina, polissacarídeos e matéria inorgânica. Os principais resultados da análise por GC-MS mostraram que todas as amostras de suberina despolimerizada são fontes abundantes de ω-hidroxiácidos e de ácidos dicarboxílicos, bem como dos correspondentes derivados epóxidados. No entanto, as quantidades relativas de cada componente identificado foram significativamente diferentes entre amostras. Por exemplo, em amostras de suberina da casca de Quercus suber L. isoladas por metanólise alcalina o composto maioritário encontrado foi o ácido 22-hidroxidocosanóico, enquanto que a suberina também proveniente da cortiça, mas isolada por hidrólise alcalina era composta maioritariamente pelo ácido 9,10-dihidroxioctadecanóico. Já no caso da amostra de suberina despolimerizada proveniente da casca externa da bétula o composto identificado como mais abundante foi o ácido 9,10-epoxi-18-hidroxioctadecanóico. A caracterização das diversas amostras de suberina despolimerizada por FTIR e RMN de 1H e de 13C foram concordantes com os resultados de GC-MS, evidenciando a sua natureza predominantemente lipofílica. Foi ainda determinada a razão entre os grupos CO2H/OH e CO2CH3/OH por RMN de 1H das amostras convenientemente derivatizadas com isocianato de tricloroacetilo, verificando-se que a suberina despolimerizada possuía quantidades não-estequiométricas destes grupos funcionais. A investigação do comportamento térmico das amostras de suberina despolimerizada, por DSC e termomicroscopia, bem como a análise por difracção de raios-X, permitiu concluir que algumas amostras de suberina despolimerizada possuíam importantes domínios cristalinos e pontos de fusão bem definidos, tipicamente próximos de 70 oC, enquanto outras amostras eram essencialmente amorfa. Factores como a fonte de suberina ou as condições de despolimerização estiveram na origem destas diferenças. iv Neste trabalho estudaram-se também os extractáveis lipofílicos da cortiça e dos seus resíduos industriais, em particular os do pó industrial de cortiça e dos condensados negros, mostrando que os extractáveis lipofílicos são uma fonte abundante de compostos triterpénicos, em particular de ácido betulínico e de friedelina. Foram ainda identificadas fracções abundantes de ω-hidroxiácidos e de ácidos dicarboxílicos no condensado negro. A segunda parte deste trabalho abordou a síntese e a caracterização de novos poliésteres alifáticos derivados de suberina. Estes materiais foram sintetizados utilizando, quer misturas de suberina despolimerizada, quer monómeros modelo estruturalmente análogos aos existentes na suberina. Recorreu-se para o efeito a duas aproximações distintas de polimerização por passos, a policondensação e a politransesterificação. Procurou-se em simultâneo maximizar a eficiência da polimerização em termos de peso molecular e de extensão da reacção e utilizar condições de reacção de química “verdes”. Neste sentido, utilizou-se a policondensação em emulsão utilizando um tensioactivo como catalisador e a policondensação em massa utilizando a lipase B de Candida antarctica. Adicionalmente foram também testado os catalisadores trifluorometanosulfonato de bismuto(III) no caso da policondensação, e ainda os catalisadores clássicos óxido de antimónio(III) e o carbonato de potássio no caso da politransesterificação. Os poliésteres resultantes foram caracterizados através de várias técnicas, tais como IV, RMN (de 1H e de 13C), DSC, DMA, TGA, difracção de raios-X e medidas dos ângulos de contacto. Verificou-se que os catalisadores trifluorometanosulfonato de bismuto (III), óxido de antimónio(III) e carbonato de potássio conduziram aos rendimentos de isolamento dos polímeros resultantes mais elevados. No caso dos poliésteres derivados da suberina os resultados em termos de rendimentos e pesos moleculares sofreram um incremento substancial quando a estequiometria da reacção de polimerização foi adequadamente balanceada (r=1) com a adição de uma quantidade extra de um comonómero. Verificou-se a predominância de diferentes estruturas consoante a amostra de suberina utilizada e as condições de síntese adoptada, predominando as cadeias lineares ou então quantidades substanciais de estruturas reticuladas. Globalmente, este primeiro estudo sistemático da utilização de suberina como um precursor de novos poliésteres alifáticos confirmou o elevado potencial deste recurso abundante e renovável como precursor para preparar materiais macromoleculares.

Extraction and purification of triterpenic acids from eucalypt bark

A indústria da pasta e do papel é um sector importante da economia mundial, particularmente a que assenta em espécies de Eucalyptus. No entanto, essas indústrias geram quantidades significativas de correntes secundárias de subprodutos e resíduos de biomassa que podem ser exploradas em aplicações de valor acrescentado em vez de serem queimadas para produção de energia. Um exemplo nobre pode ser a produção de ácidos triterpénicos com estruturas dos tipos lupano, oleanano e ursano, dada a sua abundância em alguns destes resíduos, em particular na casca, adotando o conceito de biorrefinaria integrada numa fábrica de pasta. Estes compostos são conhecidos pelas suas inúmeras actividades biológicas, por exemplo, antioxidante, anti-inflamatória e antitumoral, e podem encontrar aplicações em produtos de elevado valor, tais como cosméticos, nutracêuticos ou farmacêuticos. Neste sentido, o estudo das potencialidades das cascas das espécies de eucalipto mais exploradas enquanto fontes de compostos triterpénicos é um tópico relevante. Por conseguinte, foram analisados e comparados em pormenor os teores e composições em ácidos triterpénicos (TTAs) das cascas externas de várias espécies de eucalipto (E. globulus, E. grandis, E. urograndis, E. maidenii e E. nitens). Os teores dos principais TTAs identificados nestas espécies variaram entre 4.5 g/kg no E. urograndis e 21.6 g/kg no E. nitens. Observou-se que as cascas externas de Eucalyptus de zonas temperadas e Mediterrânicas, nomeadamente E. nitens e E. globulus, são mais ricas em TTAs que as espécies de regiões tropicais e subtropicais. Além disso, a casca externa do E. globulus é claramente a mais rica em ácidos com estruturas do tipo ursano enquanto a do E. nitens é a mais rica em ácidos do tipo oleanano e lupano. Estes resultados levaram-nos a estudar a extração dos TTAs da casca de Eucalyptus, bem como a sua posterior concentração e purificação, a qual foi efetuada por extração sólido-líquido convencional combinada com a precipitação de solutos, e por extração com fluidos supercríticos (SFE). No que diz respeito à primeira abordagem referida, foi desenvolvido neste trabalho um método patenteado que permite obter extratos enriquecidos em TTAs das cascas de eucalipto baseado em tecnologias disponíveis no imediato. Em relação à segunda abordagem, e de forma a apostar em processos de baixo impacto ambiental exigidos pelas biorrefinarias do futuro, a SFE surge como uma opção natural. Assim, foi efetuada a SFE da casca caduca do E. globulus com dióxido de carbono puro e modificado para recuperar a fração de TTAs, e os resultados foram comparados com os obtidos por extração em Soxhlet com diclorometano. Foram realizados estudos preliminares sobre a influência da pressão (100-200 bar), a adição de co-solvente (0, 5 e 8% m/m de etanol), e operação em múltiplos passos a fim de avaliar a aplicabilidade da alternativa supercrítica para a sua produção eficiente e selectiva. Os resultados destacaram a influência da pressão e o importante papel resumo (cont.) desempenhado pelo co-solvente neste processo, cujo efeito foi mais relevante do que o aumento da pressão em várias dezenas de bar. Este trabalho foi depois otimizado, usando o planeamento factorial de experiências e a metodologia de superfícies de resposta, para analisar a influência da temperatura (40-60 ºC), pressão (100-200 bar), e teor de etanol (0.0-5.0% m/m) na recuperação dos TTAs e respectiva concentração nos extractos. Nestes intervalos, as melhores condições de operação encontradas foram 200 bar, 40 °C e 5% de etanol, para as quais os modelos de regressão estatisticamente validados previram um rendimento de extração de 1.2% com 50% de concentração em TTAs, correspondendo ao rendimento em TTAs de 5.1 g/kg de casca e uma recuperação de 79.2% comparativamente ao valor do Soxhlet. Os TTAs livres e acetilados apresentaram tendências de extracção bastante distintas devido às suas diferentes afinidades para o CO2 causadas pelas diferentes polaridades: os derivados acetilados aproximam-se de um patamar máximo a cerca de 200 bar e 5% de etanol, enquanto a extração dos TTAs livres apresenta uma tendência sempre crescente no intervalo de condições estudado. Foram também medidas curvas cumulativas de SFE da casca do E. globulus de forma a analisar o comportamento cinético do processo em termos de rendimento total, rendimento em TTAs, rendimento em TTAs livres, rendimento em TTAs acetilados, e concentração dos TTAs nos extractos. Foi analisada a influência da pressão, temperatura, teor de co-solvente e caudal do dióxido de carbono sobre as respostas anteriores. Os dados experimentais foram modelados com os modelos Logístico, de Dessorção, de Placa Plana Simples, e de Difusão. Na globalidade, os resultados confirmaram que a pressão e o teor de etanol têm um efeito significativo sobre as curvas de extração, os rendimentos finais e as concentrações dos extratos, e mostraram a presença de limitações externas à transferência de massa em alguns ensaios. Mais uma vez, as famílias individuais de TTAs livres e acetilados apresentaram diferentes tendências de extracção. A modelação permitiu-nos confirmar não só o importante papel desempenhado pela difusão intraparticular na SFE, mas também a contribuição da resistência no filme em alguns ensaios. Após a análise de todos os resultados, foi efetuado um ensaio em duas etapas em série, possibilitando o enriquecimento do teor em TTAs no extracto devido às diferentes condições adotadas em cada etapa. Por último, um éster metílico de um ácido triterpénico do tipo oleanano - morolato de metilo - foi identificado pela primeira vez enquanto componente da casca de Eucalyptus na casca externa do Eucalyptus grandis x globulus, onde ocorre em teores elevados. A sua extração com CO2 supercrítico foi também realizada, visando a conceção de uma alternativa de extração ambientalmente benigna para este composto. A 200 bar e 60 ºC, a remoção do morolato de metilo atingiu um patamar às 6 h para 5.1 kg h-1 de CO2 / kg de casca. Em geral, e de forma semelhante à SFE da casca do E. globulus, os TTAs acetilados foram mais significativamente extraídos quando comparados com os seus ácidos livres, o que está diretamente relacionado com a natureza menos polar destas moléculas. O trabalho apresentado nesta tese é uma contribuição para a valorização de uma corrente de biomassa com baixo valor na indústria de pasta em duas vertentes complementares. Por um lado, aumentou o conhecimento da composição lipofílica das cascas de Eucalyptus spp. com interesse comercial para a produção de pasta, destacando o seu potencial enquanto fontes de ácidos triterpénicos. Por outro lado, foram desenvolvidos dois processos alternativos e facilmente integráveis numa fábrica de pasta para a sua exploração a partir da casca: um baseado em tecnologias convencionais bem estabelecidas a nível industrial, prevendo a sua aplicação a curto prazo, e um outro baseado na SFE, seguindo as tendências das futuras biorrefinarias.

Discordances between phylogenetic and morphological patterns in alpine leaf beetles attest to an intricate biogeographic history of lineages in postglacial Europe.

Pleistocene glacial and interglacial periods have moulded the evolutionary history of European cold-adapted organisms. The role of the different mountain massifs has, however, not been accurately investigated in the case of high-altitude insect species. Here, we focus on three closely related species of non-flying leaf beetles of the genus Oreina (Coleoptera, Chrysomelidae), which are often found in sympatry within the mountain ranges of Europe. After showing that the species concept as currently applied does not match barcoding results, we show, based on more than 700 sequences from one nuclear and three mitochondrial genes, the role of biogeography in shaping the phylogenetic hypothesis. Dating the phylogeny using an insect molecular clock, we show that the earliest lineages diverged more than 1 Mya and that the main shift in diversification rate occurred between 0.36 and 0.18 Mya. By using a probabilistic approach on the parsimony-based dispersal/vicariance framework (MP-DIVA) as well as a direct likelihood method of state change optimization, we show that the Alps acted as a cross-roads with multiple events of dispersal to and reinvasion from neighbouring mountains. However, the relative importance of vicariance vs. dispersal events on the process of rapid diversification remains difficult to evaluate because of a bias towards overestimation of vicariance in the DIVA algorithm. Parallels are drawn with recent studies of cold-adapted species, although our study reveals novel patterns in diversity and genetic links between European mountains, and highlights the importance of neglected regions, such as the Jura and the Balkanic range.

Impact des coupes partielles sur l’activité de coléoptères phloeophages et xylophages en forêt boréale

Ce projet de recherche évalue la réponse à court terme de coléoptères phloeophages et xylophages (Cerambycidae et Scolytinae) à différentes intensités de coupes partielles (0, 25 et 40% de la surface terrière prélevée) afin de déterminer la viabilité de cette méthode sylvicole en forêt boréale. Disposant de 12 parcelles expérimentales (4 répétitions pour chaque intensité de coupe) dans une sapinière à bouleau blanc située au sud de la forêt boréale (Québec, Canada), nous avons évalué l’abondance, la diversité ainsi que l’établissement (taux d’attaque) de ces deux groupes d’insectes, et ce dès la première année suivant la coupe. L’échantillonnage a été réalisé à l’aide de pièges à interception multidirectionnelle et de l’écorçage de sections de 3 espèces d’arbres exposées dans l’ensemble des parcelles. Nos résultats montrent une plus grande activité/abondance des deux taxons (abondance 5 à 6 fois plus élevée) ainsi qu’une composition en espèces différente et plus diversifiée dans les peuplements partiellement coupés (25 et 40%). De plus, la présence et la distribution d’espèces colonisant habituellement des hôtes affaiblis (e.g., Trypodendron lineatum, Rhagium inquisitor) – et pouvant donc réduire la valeur économique d’arbres résiduels – a été recensée et semble être favorisée entres autres par l’ouverture de la canopée et des blessures physiques faites aux arbres pendant les opérations sylvicoles. Par ailleurs, l’approche combinant différentes techniques d’échantillonnage a permis une meilleure compréhension des mécanismes de localisation/sélection d’hôte (variant en fonction de l’espèce), un aspect important de la dynamique des insectes pour l’évaluation des risques suite aux coupes forestières. Sur la base de cette étude à court terme, il ne semblerait pas y avoir de différence significative sur les risques pour le milieu quant à l’augmentation d’activité des Cerambycidae et Scolytinae entre les deux traitements de coupe appliqués. Il reste cependant indispensable de vérifier la validité de ces résultats sur une plus longue période afin d’établir des plans d’aménagement forestier durables pour la forêt boréale.

New beetles (Insecta : Coleoptera) from the Berriasian Purbeck Limestone Group, Dorset, UK

Four new beetle species are described from the Lower Cretaceous Purbeck Limestone Group of southern England: Mesogyrus anglicus sp. nov. (Gyrinidae), Coptoclavella purbeckensis sp. nov. (Coptoclavidae), Palaeodytes incompleta sp. nov. (Dytiscidae) and Cretorabus suleatus sp. nov. (Carabidae). The first three taxa were aquatic; the last is terrestrial but may have frequented the margins of water bodies. © 2005 Elsevier Ltd. All rights reserved.

Feeding responses of carabid beetles to dimethoate-contaminated prey

1 The feeding responses of Pterostichus madidus Fab., P. melanarius Illiger and Nebria brevicollis Fab. (Coleoptera: Carabidae) to dimethoate-contaminated prey were investigated in 'no-choice' and 'choice' feeding tests. 2 In the no-choice tests, starved beetles were presented with aphid prey treated with four concentrations of dimethoate. In the choice tests, treated and untreated prey were presented together and the feeding preferences of the starved beetles observed. 3 No avoidance or rejection behaviour was seen in any of the carabids in either of the tests, i.e. no discrimination of the treated and untreated prey was observed. 4 Sufficient dimethoate was consumed with the aphid prey to cause significant mortality levels in the carabids. 5 The concentrations of dimethoate used in these experiments are comparable to field exposure, so carabids feeding in treated fields and field margins could potentially suffer lethal effects via the indirect exposure route of consuming contaminated prey.

Extraction and determination of ellagic acid content in chestnut bark and fruit

Chestnuts are an important economic resource in the chestnut growing regions, not only for the fruit, but also for the wood. The content of ellagic acid (EA), a naturally occurring inhibitor of carcinogenesis, was determined in chestnut fruits and bark. EA was extracted with methanol and free ellagic acid was determined by HPLC with UV detection, both in the crude extract and after hydrolysis. The concentration of EA was generally increased after hydrolysis due to the presence of ellagitannins in the crude extract. The concentration varied between 0.71 and 21.6 ing g(-1) (d.w.) in un-hydrolyzed samples, and between 2.83 and 18.4 mg g(-1) (d.w.) ill hydrolyzed samples. In chestnut fruits, traces of EA were present in the seed, with higher concentrations in the pellicle and pericarp. However, all fruit tissues had lower concentrations of EA than had the bark. The concentration of EA in the hydrolyzed samples showed a non-linear correlation with the concentration in the unhydrolyzed extracts. (C) 2008 Elsevier Ltd. All rights reserved.

The role of management and landscape context in the restoration of grassland phytophagous beetles

1. Declines in area and quality of species-rich mesotrophic and calcareous grasslands have occurred all across Europe.While the European Union has promoted schemes to restore these grasslands, the emphasis for management has remained largely focused on plants. Here we focus on restoration of the phytophagous beetles of these grasslands. Although local management, particularly that which promotes the establishment of host plants, is key to restoration success, dispersal limitation is also likely to be an important limiting factor during the restoration of phytophagous beetle assemblages. 2. Using a 3-year multi-site experiment, we investigated how restoration success of phytophagous beetles was affected by hay-spreading management (intended to introduce target plant species), success in restoration of the plant communities and the landscape context within which restoration was attempted. 3. Restoration success of the plants was greatest where green hay spreading had been used to introduce seeds into restoration sites. Beetle restoration success increased over time, although hayspreading had no direct effect. However, restoration success of the beetles was positively correlated with restoration success of the plants. 4. Overall restoration success of the phytophagous beetles was positively correlated with the proportion of species-rich grassland in the landscape, as was the restoration success of the polyphagous beetles. Restoration success for beetles capable of flight and those showing oligophagous host plant specialism were also positively correlated with connectivity to species-rich grasslands. There was no indication that beetles not capable of flight showed greater dependence on landscape scale factors than flying species. 5. Synthesis and applications. Increasing the similarity of the plant community at restoration sites to target species-rich grasslands will promote restoration success for the phytophagous beetles. However, landscape context is also important, with restoration being approximately twice as successful in those landscapes containing high as opposed to low proportions of species-rich grassland. By targeting grassland restoration within landscapes containing high proportions of species-rich grassland, dispersal limitation problems associated with restoration for invertebrate assemblages are more likely to be overcome.

The restoration of phytophagous beetles in species-rich chalk grasslands

This study focuses on the restoration of chalk grasslands over a 6-year period and tests the efficacy of two management practices, hay spreading and soil disturbance, in promoting this process for phytophagous beetles. Restoration success for the beetles, measured as similarity to target species-rich chalk grassland, was not found to be influenced by either management practice. In contrast, restoration success for the plants did increase in response to hay spreading management. Although the presence of suitable host plants was considered to dictate the earliest point at which phytophagous beetles could successfully colonized, few beetle species colonized as soon as their host plants became established. Morphological characteristics and feeding habits of 27 phytophagous beetle species were therefore tested to identify factors that limited their colonization and persistence. The lag time between host plant establishment and colonization was greatest for flightless beetles. Beetles with foliage-feeding larvae both colonized at slower rates than seed-, stem-, or root-feeding species and persisted within the swards for shorter periods. Although the use of hay spreading may benefit plant communities during chalk grassland restoration, it did not directly benefit phytophagous beetles. Without techniques for overcoming colonization limitation for invertebrate taxa, short-term success of restoration may be limited to the plants only.