Iowa Racing & Gaming Commission Annual Report 2013

The Annual Report of the Iowa Racing and Gaming Commission is committed to maintaining a vibrant racing and gaming industry that provides economic growth and development for the State of Iowa while continuing to promote responsible gaming.

Iowa Racing & Gaming Commission Annual Report 2014

The Annual Report of the Iowa Racing and Gaming Commission is committed to maintaining a vibrant racing and gaming industry that provides economic growth and development for the State of Iowa while continuing to promote responsible gaming.

Iowa Racing & Gaming Commission, 2010 Annual Report

2009 Annual Report on behalf of the Iowa Racing and Gaming Commission (the Commission). The Commission is committed to maintaining a vibrant gaming industry that provides economic growth and development for the State of Iowa while continuing to promote responsible gaming and ensuring continued participation in the "Buy Iowa First" program. Although revenues at the casinos slipped during the year reflecting the general downturn in the economy, the gaming industry once again contributed over $1 billion to the state's economy, including over $300 million in gaming taxes.

Iowa Racing & Gaming Commission 2015 Annual Report

The 2015 Annual Report for the Iowa Racing & Gaming Commission.

Vente à crédit des véhicules automobiles . [Décrets et circulaires du Ministère des travaux publics, des transports et du tourisme. Edition mise à jour au 22 novembre 1956.]

[Code]

Viabilitat energètica de la sobrealimentació tèrmica de motors de combustió interna alternatius

Avaluació de la la viabilitat energètica de la millora de prestacions d’un motor de combustió interna alternatiu de tipus MEP (Motor d’Encesa Provocada o gasolina), mitjançant una sobrealimentació tèrmica. En aquest projecte, s’ha defugit de les tecnologies més esteses i s’ha estudiat una nova via no tant explorada, l’augment de la densitat de l’aire mitjançant la disminució de la seva temperatura a l’admissió, tecnologia que es coneix amb el nom de “sobrealimentació tèrmica”. Així doncs, respecte a les tecnologies de sobrealimentació més clàssiques, en aquest cas no es disposarà de cap sistema de compressió mecànica que augmenti la densitat de l’aire comprimint-lo, sinó que s’utilitzarà un sistema totalment diferent, el qual consistirà en un circuit de refrigeració per compressió mecànica de refrigerant, molt semblant a l’utilitzat pel sistema de climatització del vehicle i que en aquest cas refrigerarà l’aire d’admissió fent-lo passar per un intercanviador de calor (evaporador). Aquest fet repercutirà en un augment de potència i de les prestacions del motor tèrmic, que per contra haurà d’alimentar el cicle de compressió de vapor que produeix el fred. L’elecció d’aquest sistema, ha estat motivada sobretot per demostrar que altres sistemes de sobrealimentació són possibles a partir d’elements en part ja presents en el vehicle i que siguin fàcilment implementables, sense haver de modificar elements mecànics importants del motor

Meeting de Monaco, [avril 1920, les canots automobiles] Nieuport Hispano, Despujols III : [photographie de presse] / [Agence Rol]

Référence bibliographique : Rol, 58977

Fractional slot permanent magnet synchronous motors for low speed applications

This study compares different rotor structures of permanent magnet motors with fractional slot windings. The surface mounted magnet and the embedded magnet rotor structures are studied. This thesis analyses the characteristics of a concentrated two-layer winding, each coil of which is wound around one tooth and which has a number of slots per pole and per phase less than one (q < 1). Compared to the integer slot winding, the fractional winding (q < 1) has shorter end windings and this, thereby, makes space as well as manufacturing cost saving possible. Several possible ways of winding a fractional slot machine with slots per pole and per phase lessthan one are examined. The winding factor and the winding harmonic components are calculated. The benefits attainable from a machine with concentrated windingsare considered. Rotor structures with surface magnets, radially embedded magnets and embedded magnets in V-position are discussed. The finite element method isused to solve the main values of the motors. The waveform of the induced electro motive force, the no-load and rated load torque ripple as well as the dynamic behavior of the current driven and voltage driven motor are solved. The results obtained from different finite element analyses are given. A simple analytic method to calculate fractional slot machines is introduced and the values are compared to the values obtained with the finite element analysis. Several different fractional slot machines are first designed by using the simple analytical methodand then computed by using the finite element method. All the motors are of thesame 225-frame size, and have an approximately same amount of magnet material, a same rated torque demand and a 400 - 420 rpm speed. An analysis of the computation results gives new information on the character of fractional slot machines.A fractional slot prototype machine with number 0.4 for the slots per pole and per phase, 45 kW output power and 420 rpm speed is constructed to verify the calculations. The measurement and the finite element method results are found to beequal.

A comparative performance study of four-pole induction motors and synchronous reluctance motors in variable speed drives

Design aspects of the Transversally Laminated Anisotropic (TLA) Synchronous Reluctance Motor (SynRM) are studied and the machine performance analysis compared to the Induction Motor (IM) is done. The SynRM rotor structure is designed and manufactured for a30 kW, four-pole, three-phase squirrel cage induction motor stator. Both the IMand SynRM were supplied by a sensorless Direct Torque Controlled (DTC) variablespeed drive. Attention is also paid to the estimation of the power range where the SynRM may compete successfully with a same size induction motor. A technicalloss reduction comparison between the IM and SynRM in variable speed drives is done. The Finite Element Method (FEM) is used to analyse the number, location and width of flux barriers used in a multiple segment rotor. It is sought for a high saliency ratio and a high torque of the motor. It is given a comparison between different FEM calculations to analyse SynRM performance. The possibility to take into account the effect of iron losses with FEM is studied. Comparison between the calculated and measured values shows that the design methods are reliable. A new application of the IEEE 112 measurement method is developed and used especially for determination of stray load losses in laboratory measurements. The study shows that, with some special measures, the efficiency of the TLA SynRM is equivalent to that of a high efficiency IM. The power factor of the SynRM at rated load is smaller than that of the IM. However, at lower partial load this difference decreases and this, probably, brings that the SynRM gets a better power factor in comparison with the IM. The big rotor inductance ratio of the SynRM allows a good estimating of the rotor position. This appears to be very advantageous for the designing of the rotor position sensor-less motor drive. In using the FEM designed multi-layer transversally laminated rotor with damper windings it is possible to design a directly network driven motor without degrading the motorefficiency or power factor compared to the performance of the IM.

Variaciones en las pautas de localización industrial: formación del "Corredor Industrial del Ebro" y General Motors

El trabajo examina como la ubicación de la factoría de General Motors E., a treinta kilómetros del casco urbano de Zaragoza, está contribuyendo a la acentuación de dos aspectos: la implantación de un nuevo modelo de localización industrial cada vez más alejado de la ciudad, en la medida que los medios de transporte se van desarrollando y la corisolidación del "Corredor Industrial del Ebro", como una de las zonas más dinámicas de todo el "Eje del Ebro".

Bancs de proves per motors de modelisme

Són habituals entre els aeromodelistes les discussions que giren al voltant de la potència dels motors d’explosió i quina hèlix va millor. La manca d’informació tècnica dels motors i de les hèlix fa que aquestes discussions de vegades tinguin una validesa molt limitada, doncs es fonamenten simplement en les sensacions i percepcions subjectives de cadascun dels pilots, sobretot quan es parla de potència. En aquest projecte s’utilitzarà un dinamòmetre inercial, consistent en un volant d’inèrcia el qual s’accelerarà fins assolir les revolucions per minut màximes. La acceleració d’aquest volant mesurat en intervals de temps regulars i conegut el moment d’inèrcia del volant ens permetrà calcular el parell motor i la potència a diferents règims de revolucions per minut. Per altra banda es pretén comparar diferents hèlix muntades en un mateix motor per poder-ne comparar la tracció a diferents revolucions per minut. La tracció es mesurarà utilitzant una cèl·lula de càrrega. Les dades d’ambdós bancs de proves seran recollits i emmagatzemats per un PC amb un software fet a mida per aquest projecte. Una vegada finalitzat cada test es mostraran les dades obtingudes, tant els numèricament com gràficament, permetent a més comparar el resultat de diferents tests, de diferents motors i de diferents hèlix.