Intelligent automatic overtaking system using vision for vehicle detection

There is clear evidence that investment in intelligent transportation system technologies brings major social and economic benefits. Technological advances in the area of automatic systems in particular are becoming vital for the reduction of road deaths. We here describe our approach to automation of one the riskiest autonomous manœuvres involving vehicles – overtaking. The approach is based on a stereo vision system responsible for detecting any preceding vehicle and triggering the autonomous overtaking manœuvre. To this end, a fuzzy-logic based controller was developed to emulate how humans overtake. Its input is information from the vision system and from a positioning-based system consisting of a differential global positioning system (DGPS) and an inertial measurement unit (IMU). Its output is the generation of action on the vehicle’s actuators, i.e., the steering wheel and throttle and brake pedals. The system has been incorporated into a commercial Citroën car and tested on the private driving circuit at the facilities of our research center, CAR, with different preceding vehicles – a motorbike, car, and truck – with encouraging results.

Automatic fault detection on BIPV systems without solar irradiation data

BIPV systems are small PV generation units spread out over the territory, and whose characteristics are very diverse. This makes difficult a cost-effective procedure for monitoring, fault detection, performance analyses, operation and maintenance. As a result, many problems affecting BIPV systems go undetected. In order to carry out effective automatic fault detection procedures, we need a performance indicator that is reliable and that can be applied on many PV systems at a very low cost. The existing approaches for analyzing the performance of PV systems are often based on the Performance Ratio (PR), whose accuracy depends on good solar irradiation data, which in turn can be very difficult to obtain or cost-prohibitive for the BIPV owner. We present an alternative fault detection procedure based on a performance indicator that can be constructed on the sole basis of the energy production data measured at the BIPV systems. This procedure does not require the input of operating conditions data, such as solar irradiation, air temperature, or wind speed. The performance indicator, called Performance to Peers (P2P), is constructed from spatial and temporal correlations between the energy output of neighboring and similar PV systems. This method was developed from the analysis of the energy production data of approximately 10,000 BIPV systems located in Europe. The results of our procedure are illustrated on the hourly, daily and monthly data monitored during one year at one BIPV system located in the South of Belgium. Our results confirm that it is possible to carry out automatic fault detection procedures without solar irradiation data. P2P proves to be more stable than PR most of the time, and thus constitutes a more reliable performance indicator for fault detection procedures. We also discuss the main limitations of this novel methodology, and we suggest several future lines of research that seem promising to improve on these procedures.

TABLETUTORIAL: Stata module to provide tutorial on automated table generation and reporting

-tabletutorial- illustrates how Stata can be used to export statistical results and generate customized reports. Part 1 explains how results from Stata routines can be accessed and how they can be exported using the -file- comand or a wrapper such as, e.g., -mat2txt-. Part 2 shows how model estimation results can be archived using -estwrite- and how models can be tabulated and exported to LaTeX, MS Excel, or MS Word using -estout-. Part 3 illustrates how to set up automatic reports in LaTeX or MS Word. The tutorial is based on a talk given at CEPS/INSTEAD in Luxembourg in October 2008. After install, type -help tabletutorial- to start the tutorial (in Stata 8, type -whelp tabletutorial-). The -mat2txt-, -estwrite-, and -estout- packages, also available from SSC, are required to run the examples.

Human factors design of automated highway systems: first generation scenarios. Final report.

Federal Highway Administration, Office of Safety and Traffic Operations Research and Development, McLean, Va.

Automatic Telephone

Adjust image to portrait layout

Using architecture models to support the generation and operation of component-based adaptive systems

Modelling architectural information is particularly important because of the acknowledged crucial role of software architecture in raising the level of abstraction during development. In the MDE area, the level of abstraction of models has frequently been related to low-level design concepts. However, model-driven techniques can be further exploited to model software artefacts that take into account the architecture of the system and its changes according to variations of the environment. In this paper, we propose model-driven techniques and dynamic variability as concepts useful for modelling the dynamic fluctuation of the environment and its impact on the architecture. Using the mappings from the models to implementation, generative techniques allow the (semi) automatic generation of artefacts making the process more efficient and promoting software reuse. The automatic generation of configurations and reconfigurations from models provides the basis for safer execution. The architectural perspective offered by the models shift focus away from implementation details to the whole view of the system and its runtime change promoting high-level analysis. © 2009 Springer Berlin Heidelberg.

Proactive environmental systems:the next generation of environmental monitoring

In this article we envision factors and trends that shape the next generation of environmental monitoring systems. One key factor in this respect is the combined effect of end-user needs and the general development of IT services and their availability. Currently, an environmental (monitoring) system is assumed to be reactive. It delivers measurement data and computational results only if the user explicitly asks for it either by query or subscription. There is a temptation to automate this by simply pushing data to end-users. This, however, leads easily to an "advertisement strategy", where data is pushed to end-users regardless of users' needs. Under this strategy, the mere amount of received data obfuscates the individual messages; any "automatic" service, regardless of its fitness, overruns a system that requires the user's initiative. The foreseeable problem is that, unless there is no overall management, each new environmental service is going to compete for end-users' attention and, thus, inadvertently hinder the use of existing services. As the main contribution we investigate the nature of proactive environmental systems, and how they should be designed to avoid the aforementioned problem. We also discuss how semantics, participatory sensing, uncertainty management, and situational awareness link to proactive environmental systems. We illustrate our proposals with some real-life examples.

A Method of Context-sensitive Help Generation Using a Task Project

The article presents a new method to automatic generation of help in software. Help generation is realized in the framework of the tool for development and automatic generation of user interfaces based on ontologies. The principal features of the approach are: support for context-sensitive help, automatic generation of help using a task project and an expandable system of help generation.

Methodology for Language Analysis and Generation in Closed Domains: Pharmaceutical Leaflet

The best results in the application of computer science systems to automatic translation are obtained in word processing when texts pertain to specific thematic areas, with structures well defined and a concise and limited lexicon. In this article we present a plan of systematic work for the analysis and generation of language applied to the field of pharmaceutical leaflet, a type of document characterized by format rigidity and precision in the use of lexicon. We propose a solution based in the use of one interlingua as language pivot between source and target languages; we are considering Spanish and Arab languages in this case of application.

Ontology-based pathways generation for biomass to bioenergy conversion

Bio energy is a renewable energy and a solution to the depleting fossil fuels. Bio energy such as heat, power and bio fuel is generated by conversion technologies using biomass for example domestic waste, root crops, forest residue and animal slurry. Pyrolysis, anaerobic digestion and combined heat and power engine are some examples of the technologies. Depending on the nature of a biomass, it can be treated with various technologies giving out some products, which can be further treated with other technologies and eventually converted into the final products as bio energy. The pathway followed by the biomass, technologies, intermediate products and bio energy in the conversion process is referred to as bio energy pathway. Identification of appropriate pathways optimizes the conversion process. Although there are various approaches to create or generate the pathways, there is still a need for a semantic approach to generate the pathways, which allow checking the consistency of the knowledge, and to share and extend the knowledge efficiently. This paper presents an ontology-based approach to automatic generation of the pathways for biomass to bio energy conversion, which exploits the definition and hierarchical structure of the biomass and technologies, their relationship and associated properties, and infers appropriate pathways. A case study has been carried out in a real-life scenario, the bio energy project for the North West of Europe (Bioen NW), which showed promising results.

Improving the Quality of Education by Using a System for Development and Generation of Personalized Educational Materials

Report published in the Proceedings of the National Conference on "Education and Research in the Information Society", Plovdiv, May, 2016

Application of automatic load transfer on feeder utilisation balance

This paper looks at how automatic load transfer may be used as a possible planning tool to help deliver faster connections for customers. A trial on an area of overhead line Network is presented to show how improvements in % feeder utilisation may be realised by changing the location of the open point. The reported Network data is compared to calculated data under two different configurations over a two week trial period. The results show that ALT open point determination in the presence of generation is different from a load only circuit and that the open points may not be fixed with time. Looking at improvements in Network headroom may not be conducive to other improvements in the network such as loss reduction or improving voltage profiles.

Automatic maintenance of category hierarchy

Category hierarchy is an abstraction mechanism for efficiently managing large-scale resources. In an open environment, a category hierarchy will inevitably become inappropriate for managing resources that constantly change with unpredictable pattern. An inappropriate category hierarchy will mislead the management of resources. The increasing dynamicity and scale of online resources increase the requirement of automatically maintaining category hierarchy. Previous studies about category hierarchy mainly focus on either the generation of category hierarchy or the classification of resources under a pre-defined category hierarchy. The automatic maintenance of category hierarchy has been neglected. Making abstraction among categories and measuring the similarity between categories are two basic behaviours to generate a category hierarchy. Humans are good at making abstraction but limited in ability to calculate the similarities between large-scale resources. Computing models are good at calculating the similarities between large-scale resources but limited in ability to make abstraction. To take both advantages of human view and computing ability, this paper proposes a two-phase approach to automatically maintaining category hierarchy within two scales by detecting the internal pattern change of categories. The global phase clusters resources to generate a reference category hierarchy and gets similarity between categories to detect inappropriate categories in the initial category hierarchy. The accuracy of the clustering approaches in generating category hierarchy determines the rationality of the global maintenance. The local phase detects topical changes and then adjusts inappropriate categories with three local operations. The global phase can quickly target inappropriate categories top-down and carry out cross-branch adjustment, which can also accelerate the local-phase adjustments. The local phase detects and adjusts the local-range inappropriate categories that are not adjusted in the global phase. By incorporating the two complementary phase adjustments, the approach can significantly improve the topical cohesion and accuracy of category hierarchy. A new measure is proposed for evaluating category hierarchy considering not only the balance of the hierarchical structure but also the accuracy of classification. Experiments show that the proposed approach is feasible and effective to adjust inappropriate category hierarchy. The proposed approach can be used to maintain the category hierarchy for managing various resources in dynamic application environment. It also provides an approach to specialize the current online category hierarchy to organize resources with more specific categories.

Wireless Network Analytics for Next Generation Spectrum Awareness

The importance of networks, in their broad sense, is rapidly and massively growing in modern-day society thanks to unprecedented communication capabilities offered by technology. In this context, the radio spectrum will be a primary resource to be preserved and not wasted. Therefore, the need for intelligent and automatic systems for in-depth spectrum analysis and monitoring will pave the way for a new set of opportunities and potential challenges. This thesis proposes a novel framework for automatic spectrum patrolling and the extraction of wireless network analytics. It aims to enhance the physical layer security of next generation wireless networks through the extraction and the analysis of dedicated analytical features. The framework consists of a spectrum sensing phase, carried out by a patrol composed of numerous radio-frequency (RF) sensing devices, followed by the extraction of a set of wireless network analytics. The methodology developed is blind, allowing spectrum sensing and analytics extraction of a network whose key features (i.e., number of nodes, physical layer signals, medium access protocol (MAC) and routing protocols) are unknown. Because of the wireless medium, over-the-air signals captured by the sensors are mixed; therefore, blind source separation (BSS) and measurement association are used to estimate the number of sources and separate the traffic patterns. After the separation, we put together a set of methodologies for extracting useful features of the wireless network, i.e., its logical topology, the application-level traffic patterns generated by the nodes, and their position. The whole framework is validated on an ad-hoc wireless network accounting for MAC protocol, packet collisions, nodes mobility, the spatial density of sensors, and channel impairments, such as path-loss, shadowing, and noise. The numerical results obtained by extensive and exhaustive simulations show that the proposed framework is consistent and can achieve the required performance.

Quality and Aspect based Argument Generation

Natural Language Processing has always been one of the most popular topics in Artificial Intelligence. Argument-related research in NLP, such as argument detection, argument mining and argument generation, has been popular, especially in recent years. In our daily lives, we use arguments to express ourselves. The quality of arguments heavily impacts the effectiveness of our communications with others. In professional fields, such as legislation and academic areas, arguments of good quality play an even more critical role. Therefore, argument generation with good quality is a challenging research task that is also of great importance in NLP. The aim of this work is to investigate the automatic generation of arguments with good quality, according to the given topic, stance and aspect (control codes). To achieve this goal, a module based on BERT [17] which could judge an argument's quality is constructed. This module is used to assess the quality of the generated arguments. Another module based on GPT-2 [19] is implemented to generate arguments. Stances and aspects are also used as guidance when generating arguments. After combining all these models and techniques, the ranks of the generated arguments could be acquired to evaluate the final performance. This dissertation describes the architecture and experimental setup, analyzes the results of our experimentation, and discusses future directions.