951 resultados para Augmented-Reality
Resumo:
This paper describes a work-in-progress on developing design environments that combine wireless and mobile technologies with augmented reality to facilitate bringing context from the physical environment to the virtual models for design work. One of the challenges for designers in a variety of end-user-oriented design disciplines such as architecture and industrial design has been capturing and replaying the contextual information of the intended domain of the artifact being designed. Either the technology is decidedly low-tech, such as charcoal drawings in a sketchbook, out-of-reach, such as immersive virtual reality CAVEs, or a “make-do” with existing technologies, such as a collage of digital photos. This paper describes a novel combination of “off-the-shelf” technologies that may allow designers more capability to create models using standard computer-aided design applications and augmented reality to combine the current, physical context with the projected, digital context. We demonstrate this approach in the building design domain to address a common problem in building construction, construction defect resolution.
Resumo:
[SPA] El objetivo de este Trabajo de Fin de Grado ha sido diseñar un cuento multilingüe que incorpora una innovación tecnológica, la Realidad Aumentada, para favorecer el proceso de enseñanza-aprendizaje lingüístico en la escuela. Para ello, hemos analizado algunos cuentos con Realidad Aumentada que se pueden encontrar en el mercado. Al no encontrar ningún cuento que cumpliese nuestras expectativas, hemos creado un cuento multilingüe con Realidad Aumentada adaptando el cuento clásico “Peter Pan”, que cumple los objetivos de fomentar el aprendizaje de diferentes idiomas y el gusto por la lectura, valorar las lenguas inmigrantes en las aulas y promover el uso de las TIC.
Resumo:
Training of optometrists is traditionally achieved under close supervision of peers and superiors. With the rapid advancement in technology, medical procedures are performed more efficiently and effectively, resulting in faster recovery times and less trauma to the patient. However, application of this technology has made it difficult to effectively demonstrate and teach these manual skills as the education is now a combination of not only the medical procedure but also the use of the technology. In this paper we propose to increase the training capabilities of optometry students through haptically-enabled single-point and multi-point training tools as well as augmented reality techniques. Haptics technology allows a human to touch and feel virtual computer models as though they are real. Through physical connection to the operator, haptic devices are considered to be personal robots that are capable of improving the human-computer interaction with a virtual environment. These devices have played an increasing role in developing expertise, reducing instances of medical error and reducing training costs. A haptically-enabled virtual training environment, integrated with an optometry slit lamp instrument can be used to teach cognitive and manual skills while the system tracks the performance of each individual. These interactions would ideally replicate every aspect of the real procedure, consequently preparing the trainee for every possible scenario, without risking the health of a real patient.
Resumo:
Projects in the area of architectural design and urban planning typically engage several architects as well as experts from other professions. While the design and review meetings thus often involve a large number of cooperating participants, the actual design is still done by the individuals in the time in between those meetings using desktop PCs and CAD applications. A real collaborative approach to architectural design and urban planning is often limited to early paper-based sketches.In order to overcome these limitations, we designed and realized the ARTHUR system, an Augmented Reality (AR) enhanced round table to support complex design and planning decisions for architects. WhileAR has been applied to this area earlier, our approach does not try to replace the use of CAD systems but rather integrates them seamlessly into the collaborative AR environment. The approach is enhanced by intuitiveinteraction mechanisms that can be easily con-figured for different application scenarios.
Resumo:
Virtual studio technology plays an important role for modern television productions. Blue-screen matting is a common technique for integrating real actors or moderators into computer generated sceneries. Augmented reality offers the possibility to mix real and virtual in a more general context. This article proposes a new technological approach for combining real studio content with computergenerated information. Digital light projection allows a controlled spatial, temporal, chrominance and luminance modulation of illumination – opening new possibilities for TV studios.
Resumo:
In this paper the software architecture of a framework which simplifies the development of applications in the area of Virtual and Augmented Reality is presented. It is based on VRML/X3D to enable rendering of audio-visual information. We extended our VRML rendering system by a device management system that is based on the concept of a data-flow graph. The aim of the system is to create Mixed Reality (MR) applications simply by plugging together small prefabricated software components, instead of compiling monolithic C++ applications. The flexibility and the advantages of the presented framework are explained on the basis of an exemplary implementation of a classic Augmented Realityapplication and its extension to a collaborative remote expert scenario.
Resumo:
Spatial tracking is one of the most challenging and important parts of Mixed Reality environments. Many applications, especially in the domain of Augmented Reality, rely on the fusion of several tracking systems in order to optimize the overall performance. While the topic of spatial tracking sensor fusion has already seen considerable interest, most results only deal with the integration of carefully arranged setups as opposed to dynamic sensor fusion setups. A crucial prerequisite for correct sensor fusion is the temporal alignment of the tracking data from several sensors. Tracking sensors are typically encountered in Mixed Reality applications, are generally not synchronized. We present a general method to calibrate the temporal offset between different sensors by the Time Delay Estimation method which can be used to perform on-line temporal calibration. By applying Time Delay Estimation on the tracking data, we show that the temporal offset between generic Mixed Reality spatial tracking sensors can be calibrated. To show the correctness and the feasibility of this approach, we have examined different variations of our method and evaluated various combinations of tracking sensors. We furthermore integrated this time synchronization method into our UBITRACK Mixed Reality tracking framework to provide facilities for calibration and real-time data alignment.
Resumo:
Negli ultimi anni il crescere della capacità di calcolo dei dispositivi e il diminuire delle loro dimensioni ha permesso di far nascere idee innovative e di esplorare più in dettaglio alcuni settori. Uno di questi è sicuramente quello della realtà aumentata (Augmented reality), infatti, la discussione su questo argomento nasce già negli anni 40 del novecento, ma, per mancanza di mezzi tecnologici adeguati, solo ora si iniziano a realizzare le prime applicazioni che si basano su questa idea e il grande pubblico inizia ad interessarsi all'argomento. La costruzione di applicazioni di realtà aumentata, al momento, è basata sull'utilizzo di alcuni framework che mettono a disposizione dello sviluppatore alcune funzioni molto comuni in questi software, come il tracking di marker e l'utilizzo di bottoni virtuali. Questi strumenti, seppur comodi, non garantiscono sempre la buona progettazione dell'applicazione e tendono a unire insieme parti di logica applicativa e di grafica. Per questo motivo, anche nella ricerca, si stanno cercando di studiare dei metodi in grado di permettere una divisione ottimale dei compiti in modo da ottenere un software riusabile e facilmente mantenibile, ma che permetta anche di sfruttare appieno le potenzialità dell'AR attraverso, per esempio, sistemi distribuiti. Un framework concettuale che rientra in questa categoria è sicuramente quello degli Augmented Worlds, mondi virtuali collegati a quello fisico che ne incrementano le caratteristiche e le possibilità tramite la presenza di entità aumentate. La tesi, quindi, si propone di sviluppare un prototipo di un framework con le caratteristiche sopra citate di estendibilità, utilizzando le piattaforme in questo momento a disposizione e ispirandosi alla visione degli Augmented Worlds.
Resumo:
La tesi presenta una panoramica sull'augmented, virtual e mixed reality, descrivendone le caratteristiche e le modalità di sviluppo. Come caso di studio viene analizzato il dispositivo Microsoft Hololens, descrivendone le caratteristiche concettuali, hardware e software. Per le applicazioni di questo dispositivo viene effettuata una riprogettazione della gestione e del concetto di ologramma all'interno di un'applicazione olografica, analizzandone i motivi e i vantaggi. E' fornita una overview sui dettagli implementativi della riprogettazione al fine di chiarire ogni aspetto dell'applicazione.
Resumo:
Due to the popularity of modern Collaborative Virtual Environments, there has been a related increase in their size and complexity. Developers therefore need visualisations that expose usage patterns from logged data, to understand the structures and dynamics of these complex environments. This chapter presents a new framework for the process of visualising virtual environment usage data. Major components, such as an event model, designer task model and data acquisition infrastructure are described. Interface and implementation factors are also developed, along with example visualisation techniques that make use of the new task and event model. A case study is performed to illustrate a typical scenario for the framework, and its benefits to the environment development team.
Resumo:
This paper anatomises emerging developments in online community engagement in a major global industry: real estate. Economists argue that we are entering a ‘social network economy’ in which ‘complex social networks’ govern consumer choice and product value. In the light of this, organisations are shifting from thinking and behaving in the conventional ‘value chain’ model--in which exchanges between firms and customers are one-way only, from the firm to the consumer--to the ‘value ecology’ model, in which consumers and their networks become co-creators of the value of the product. This paper studies the way in which the global real estate industry is responding to this environment. This paper identifies three key areas in which online real estate ‘value ecology’ work is occurring: real estate social networks, games, and locative media / augmented reality applications. Uptake of real estate applications is, of course, user-driven: the paper not only highlights emerging innovations; it also identifies which of these innovations are actually being taken up by users, and the content contributed as a result. The paper thus provides a case study of one major industry’s shift into a web 2.0 communication model, focusing on emerging trends and issues.
Resumo:
This workshop brings together people from a diverse range of disciplines to discuss how academic researchers and community practitioners and activists can work together to explore the use of information and communication technologies, social media, augmented reality, and other forms of network technologies for research and action in pursuit of social responsibility. The aim is to connect people with ideas, ideas with research projects, and harness new media to further inquiry into socially just outcomes in our community.