923 resultados para Asset Management, Failure Probability, Expected Life, Life Cycle Cost, Average Energy Method
Resumo:
Our objective for this study was to evaluate the influence of preindustrial and expected future atmospheric CO2 concentrations (280 µatm and 700 µatm pCO2, respectively) on different life-cycle stages of the kelp Laminaria hyperborea from Helgoland (Germany, North Sea). Zoospore germination, gametogenesis, vegetative growth, sorus formation and photosynthetic performance of vegetative and fertile tissue were examined. The contribution of external carbonic anhydrase (exCA) to C-supply for net-photosynthesis (net-PS) and the Chla- and phlorotannin content were investigated. Female gametogenesis and vegetative growth of sporophytes were significantly enhanced under the expected future pCO2. rETR(max) and net-PS of young vegetative sporophytes tended to increase performance at higher pCO2. The trend towards elevated net-PS vanished after inhibition of exCA. In vegetative sporophytes, phlorotannin content and Chla content were not significantly affected by pCO2.
Resumo:
Poster presented in the 24th European Symposium on Computer Aided Process Engineering (ESCAPE 24), Budapest, Hungary, June 15-18, 2014.
Resumo:
In this work, we analyze the effect of incorporating life cycle inventory (LCI) uncertainty on the multi-objective optimization of chemical supply chains (SC) considering simultaneously their economic and environmental performance. To this end, we present a stochastic multi-scenario mixed-integer linear programming (MILP) coupled with a two-step transformation scenario generation algorithm with the unique feature of providing scenarios where the LCI random variables are correlated and each one of them has the desired lognormal marginal distribution. The environmental performance is quantified following life cycle assessment (LCA) principles, which are represented in the model formulation through standard algebraic equations. The capabilities of our approach are illustrated through a case study of a petrochemical supply chain. We show that the stochastic solution improves the economic performance of the SC in comparison with the deterministic one at any level of the environmental impact, and moreover the correlation among environmental burdens provides more realistic scenarios for the decision making process.
Resumo:
Investigation about the psychological experiences of the reproductive life cycle showed that in critical moments special reactions may happen. These reactions seem to be defensive in nature, are set in motion in order to promote some kind of emotional protection and are performed in two opposite directions: a) a decreasing of the contact with aggressive impulses and b) an increasing of the use of rationalization and denial of frustrating situations. Examples of those rearrangements were observed at samples of: 1) pregnant women in obstetric high-risk consultation, 2) infertile couples waiting for infertility consultations and 3) pregnant women waiting for amniocentesis results. These data seem to be in accordance with the classical psychological points of view: a) gestation should be considered as a period of protection, b) during pregnancy a “primary maternal preoccupation” (Winnicot, 1958) emerges leading to the mobilization of all resources available for pregnant women and c) along gestational development psychological changes show how flexible maternal functioning may become. What was not expected is that in the absence of pregnancy, infertile couples should behave very similarly to what it is observed when pregnancy is in danger or when medical problems about the mother’s or the baby’s health arise in the horizon. Due to its “freezing” consequences upon emotional development we propose that this kind of reaction will be designated as “stand-by reaction”.
Resumo:
The present work aims to develop the Life Cycle Assessment study of thermo-modified Atlanticwood® pine boards based on real data provided by Santos & Santos Madeiras company. Atlanticwood® pine boards are used mainly for exterior decking and cladding facades of buildings. The LCA study is elaborated based on ISO 14040/44 standard and Product Category Rules for preparing an environmental product declaration for Construction Products and Construction Services. The inventory analysis and, subsequently, the impact analysis have been performed using the LCA software SimaPro8.0.4. The method chosen for impact assessment was EPD (2013) V1.01. The results show that more than ¾ of ‘Acidification’, ‘Eutrophication’, ‘Global warming’ and ‘Abiotic depletion’ caused by 1 m3 of Atlanticwood® pine boards production is due to energy consumption (electricity + gas + biomass). This was to be expected since the treatment is based on heat production and no chemicals are added during the heat treatment process.
Resumo:
BACKGROUND INFORMATION The Plasmodium parasite, during its life cycle, undergoes three phases of asexual reproduction, these being repeated rounds of erythrocytic schizogony, sporogony within oocysts on the mosquito midgut wall and exo-erythrocytic schizogony within the hepatocyte. During each phase of asexual reproduction, the parasite must ensure that every new daughter cell contains an apicoplast, as this organelle cannot be formed de novo and is essential for parasite survival. To date, studies visualizing the apicoplast in live Plasmodium parasites have been restricted to the blood stages of Plasmodium falciparum. RESULTS In the present study, we have generated Plasmodium berghei parasites in which GFP (green fluorescent protein) is targeted to the apicoplast using the specific targeting sequence of ACP (acyl carrier protein), which has allowed us to visualize this organelle in live Plasmodium parasites. During each phase of asexual reproduction, the apicoplast becomes highly branched, but remains as a single organelle until the completion of nuclear division, whereupon it divides and is rapidly segregated into newly forming daughter cells. We have shown that the antimicrobial agents azithromycin, clindamycin and doxycycline block development of the apicoplast during exo-erythrocytic schizogony in vitro, leading to impaired parasite maturation. CONCLUSIONS Using a range of powerful live microscopy techniques, we show for the first time the development of a Plasmodium organelle through the entire life cycle of the parasite. Evidence is provided that interference with the development of the Plasmodium apicoplast results in the failure to produce red-blood-cell-infective merozoites.
Resumo:
Time, cost and quality achievements on large-scale construction projects are uncertain because of technological constraints, involvement of many stakeholders, long durations, large capital requirements and improper scope definitions. Projects that are exposed to such an uncertain environment can effectively be managed with the application of risk management throughout the project life cycle. Risk is by nature subjective. However, managing risk subjectively poses the danger of non-achievement of project goals. Moreover, risk analysis of the overall project also poses the danger of developing inappropriate responses. This article demonstrates a quantitative approach to construction risk management through an analytic hierarchy process (AHP) and decision tree analysis. The entire project is classified to form a few work packages. With the involvement of project stakeholders, risky work packages are identified. As all the risk factors are identified, their effects are quantified by determining probability (using AHP) and severity (guess estimate). Various alternative responses are generated, listing the cost implications of mitigating the quantified risks. The expected monetary values are derived for each alternative in a decision tree framework and subsequent probability analysis helps to make the right decision in managing risks. In this article, the entire methodology is explained by using a case application of a cross-country petroleum pipeline project in India. The case study demonstrates the project management effectiveness of using AHP and DTA.
Resumo:
This article takes a broader theoretical perspective of the retail life cycle by incorporating threshold periods at important inflection points in the international growth process. Specifically, it considers one threshold interval between an early phase of disjointed international expansion and a more focused, accelerated international growth programme. It concludes that executives need to consider a set of threshold periods during the development and growth of international store operations, understand why these events occur, and consider in what ways to respond to them to overcome and cross the threshold. Salient lessons are extracted from Wal-Mart's experiences during the threshold period for other international managers. © 2005 Elsevier Ltd. All rights reserved.
Resumo:
1. Exchange of carbon dioxide (CO2) from soils can contribute significantly to the global warming potential (GWP) of agro-ecosystems. Due to variations in soil type, climatic onditions and land management practices, exchange of CO2 can differ markedly in different geographical locations. The food industry is developing carbon footprints for their products necessitating integration of CO2 exchange from soils with other CO2 emissions along the food chain. It may be advantageous to grow certain crops in different geographical locations to minimize CO2 emissions from the soil, and this may provide potential to offset other emissions in the food chain, such as transport. 2. Values are derived for the C balance of soils growing horticultural crops in the UK, Spain and Uganda. Net ecosystem production (NEP) is firstly calculated from the difference in net primary production (NPP) and heterotrophic soil respiration (Rh). Both NPP and Rh were estimated from intensive direct field measurements. Secondly, net biome production (NBP) is calculated by subtracting the crop biomass from NEP to give an indication of C balance. The importance of soil exchange is discussed in the light of recent discussions on carbon footprints and within the context of food life-cycle assessment (LCA). 3. The amount of crop relative to the biomass and the Rh prevailing in the different countries were the dominant factors influencing the magnitude of NEP and NBP. The majority of the biomass for lettuce Lactuca sativa and vining peas Pisum sativum, was removed from the field as crop; therefore, NEP and NBP were mainly negative. This was amplified for lettuces grown in Uganda (-16·5 and -17 t C ha-1 year-1 compared to UK and Spain -4·8 to 7·4 and -5·1 to 6·3 t C ha-1 year-1 for NEP and NBP, respectively) where the climate elevated Rh. 4. Synthesis and applications. This study demonstrates the importance of soil emissions in the overall life cycle of vegetables. Variability in such emissions suggests that assigning a single value to food carbon footprints may not be adequate, even within a country. Locations with high heterotrophic soil respiration, such as Spain and Uganda (21·9 and 21·6 t C ha-1 year-1, respectively), could mitigate the negative effects of climate on the C costs of crop production by growth of crops with greater returns of residue to the soil. This would minimize net CO2 emissions from these agricultural ecosystems.
Resumo:
"Perceptions of Organizational Effectiveness over Organizational Life Cycles" written by Kim S. Cameron and David S. Whetten, posits a theory regarding organizational effectiveness criteria change as firms develop along the life cycle continuum. Induced from observations obtained from a simulation game, the Cameron and Whetten theory is applied in this article to two real organizations, Wendy's and McDonald's, with the intention of demonstrating that this theory is applicable in "real life" situations.
Resumo:
Abstract : The use of social media tools to support small and medium-sized enterprises (SME) to support their business activities throughout the product life cycle (PLC) phases represents an interesting opportunity. SMEs operate in very competitive environments, and face significant challenges primarily caused by their size disadvantage. By nature, social media tools and platforms can enable them to overcome some of these challenges, as they are often very inexpensive, familiar and easy to use, allowing them to reach large audiences they would not be able to reach with traditional and expensive marketing initiatives. To provide solutions to this problem, this research identified three main objectives. The first objective was to draw a picture of the existing academic literature on the use of social media tools in the PLC context to better understand how these tools were studied and used in businesses, and for what purpose. Second, this research aimed at understanding how SMEs actually use social media tools to support their different business activities to identify the gap between academic research and actual business practices. Finally, based on the findings highlighted from the previous objectives, this research aimed at developing theory on this topic by proposing a conceptual framework of customer engagement enabled by social media. The conceptual framework aimed at answering general questions that emerged from the initial two objectives: Why do some SMEs use social media to support customer engagement, while others do not? Why do firms use different social media tools to support their customer engagement initiatives? Why does the scope of customer engagement initiatives (i.e., across different PLC phases) vary between SMEs? What are the potential outcomes of conducting customer engagement initiatives for the organizing firms? In order to achieve these research objectives, the methodology employed for this research is threefold. First, a systematic literature review was performed in order to properly understand how the use of social media tools in the PLC context had been studied. The final results consisted of 78 academic articles which were analyzed based on their bibliometric information and their content. Second, in order to draw the contrast between the academic publications and managerial reality of SMEs, six semi-structured interviews were conducted to understand how these firms actually use social media to support different activities in each of the PLC phases. Third, five additional semi-structured interviews were performed to gather a deeper understanding of this phenomenon and generate theory to support the proposed conceptual framework. The conceptual framework focuses on the degree of customer engagement, which is comprised of the scope (PLC phases) of customer engagement and the technology (social media tools) employed to support these initiatives. Two sets of antecedents were examined, firm motivators and firm impediments, as they could both potentially affect the scope and the social media tools used to support customer engagement initiatives. Finally, potential customer engagement outcomes for SMEs developing these initiatives were also examined. The semi-structured interviews lasted approximately 25-35 minutes, and were performed using an interview grid consisting of 24 open-ended questions. The interview grid was developed based on the findings of the systematic literature review, and this qualitative approach allowed for a rich understanding of the interviewed SMEs’ use of social media tools to support and engage customers in their different PLC activities. The main results highlighted by this project demonstrate that this field is relatively recent and sees constant increase in research interest since 2008. However, most of the academic research focuses on the use of social media tools to support innovation activities during the new product development process, while the interviewed firms almost exclusively used the tools to engage customers in the later phases of the PLC, primarily for promotion, customer service support, and business development activities. Interestingly, the interviewed firms highlighted several benefits of using social media tools to engage customers, some of which could help them overcome certain size disadvantages previously mentioned. These firms are in need of further guidelines to properly implement such initiatives and reap the expected benefits. Results suggest that SMEs are far behind both large companies and academic research in their use of social media to engage customers in different business activities. The proposed conceptual framework serves as a great tool to better understand their reality and eventually better support them in their social media and customer engagement efforts. However, this framework needs to be further developed and improved. This research project provides a 360-degree view of the phenomenon of the use of social media to support customer engagement for SMEs, by providing both a thorough systematic review of the academic research and an understanding of the managerial reality of SMEs behind this phenomenon. From this analysis, a conceptual framework is then proposed and serves as a stepping stone for future researchers who are interested in developing theory in this field.
Resumo:
The Allergic Rhinitis and its Impact on Asthma (ARIA) initiative commenced during a World Health Organization workshop in 1999. The initial goals were (1) to propose a new allergic rhinitis classification, (2) to promote the concept of multi-morbidity in asthma and rhinitis and (3) to develop guidelines with all stakeholders that could be used globally for all countries and populations. ARIA—disseminated and implemented in over 70 countries globally—is now focusing on the implementation of emerging technologies for individualized and predictive medicine. MASK [MACVIA (Contre les Maladies Chroniques pour un Vieillissement Actif)-ARIA Sentinel NetworK] uses mobile technology to develop care pathways for the management of rhinitis and asthma by a multi-disciplinary group and by patients themselves. An app (Android and iOS) is available in 20 countries and 15 languages. It uses a visual analogue scale to assess symptom control and work productivity as well as a clinical decision support system. It is associated with an inter-operable tablet for physicians and other health care professionals. The scaling up strategy uses the recommendations of the European Innovation Partnership on Active and Healthy Ageing. The aim of the novel ARIA approach is to provide an active and healthy life to rhinitis sufferers, whatever their age, sex or socio-economic status, in order to reduce health and social inequalities incurred by the disease.
Resumo:
Compared to other, plastic materials have registered a strong acceleration in production and consumption during the last years. Despite the existence of waste management systems, plastic_based materials are still a pervasive presence in the environment, with negative consequences on marine ecosystem and human health. The recycling is still challenging due to the growing complexity of product design, the so-called overpackaging, the insufficient and inadequate recycling infrastructure, the weak market of recycled plastics and the high cost of waste treatment and disposal. The Circular economy package, the European Strategy for plastics in a circular economy and the recent European Green Deal include very ambitious programmes to rethink the entire plastic value chain. As regards packaging, all plastic packaging will have to be 100% recyclable (or reusable) and 55% recycled by 2030. Regions are consequently called upon to set up a robust plan able to fit the European objectives. It takes on greater importance in Emilia Romagna where the Packaging valley is located. This thesis supports the definition of a strategy aimed to establish an after-use plastics economy in the region. The PhD work has set the basis and the instruments to establish the so-called Circularity Strategy with the aim to turn about 92.000t of plastic waste into profitable secondary resources. System innovation, life cycle thinking and participative backcasting method have allowed to deeply analyse the current system, orientate the problem and explore sustainable solutions through a broad stakeholder participation. A material flow analysis, accompanied by a barrier analysis, has supported the identification of the gaps between the present situation and the 2030 scenario. Eco-design for and from recycling (and a mass _based recycling rate (based on the effective amount of plastic wastes turned into secondary plastics), valorized by a value_based indicator, are the key-points of the action plan.
Resumo:
Schistosomiasis is a common tropical disease caused by Schistosoma species Schistosomiasis' pathogenesis is known to vary according to the worms' strain. Moreover, high parasitical virulence is directly related to eggs release and granulomatous inflammation in the host's organs. This virulence might be influenced by different classes of molecules, such as lipids. Therefore, better understanding of the metabolic profile of these organisms is necessary, especially for an increased potential of unraveling strain virulence mechanisms and resistance to existing treatments. In this report, direct-infusion electrospray high-resolution mass spectrometry (ESI(+)-HRMS) along with the lipidomic platform were employed to rapidly characterize and differentiate two Brazilian S. mansoni strains (BH and SE) in three stages of their life cycle: eggs, miracidia and cercariae, with samples from experimental animals (Swiss/SPF mice). Furthermore, urine samples of the infected and uninfected mice were analyzed to assess the possibility of direct diagnosis. All samples were differentiated using multivariate data analysis, PCA, which helped electing markers from distinct lipid classes; phospholipids, diacylglycerols and triacylglycerols, for example, clearly presented different intensities in some stages and strains, as well as in urine samples. This indicates that biochemical characterization of S. mansoni may help narrowing-down the investigation of new therapeutic targets according to strain composition and aggressiveness of disease. Interestingly, lipid profile of infected mice urine varies when compared to control samples, indicating that direct diagnosis of schistosomiasis from urine may be feasible.