Extensometria: estudo das microdeformações ao redor de três implantes de hexágono interno, com posicionamento linear, sob a influência da fundição de coifas plásticas e usinadas

The objective of this in vitro study was quantify the micro strain development around the internal hexagon implants, varying the type of prosthetic coping. For This reason, three implants of internal hexagon were inserted into one polyurethane block in line placement. Microunit abutments were screwed onto the implants. Tangentially the implants were bonded the strain gauges, two to the center implant. Ten structures, each one containing three copings were cast in Co-Cr alloy, that were divided into groups in the first group, plastic copings were used, and in the second group machined copings were used. The superstructure’s occlusal screws were tightened onto Microunit abutments with 10 Ncm torque, the magnitude of micro strain was recorded. The mean values of each strain gauge of each plastic copings were 363,37 ± 237,66 and the machined copings were 338,12 ± 223,01. The data were analyzed statistically by t- Student test. No statistically significant difference was found between the prosthetic copings (p= 0,867). It was concluded that to internal hexagon implants in line placement, the type of copings presented similar magnitude of micro strain after prosthetic occlusal screw was tightened

Caracterização estrutural da Liga Al-1% Si

The aim of this study is to characterize the macrostructure and microstructure of Al - 1%Si alloy obtained in sand and metallic molds. Aluminium has good mechanical properties, but adding silicon, even in small quantities, can change the microstructure and improves mechanical behavior. Workpieces were castings in metallic and sand molds and one can see a difference in their cooling curve, macroscopic and microscopic structures. The sand mold casting has lower cooling rate and so its grains are larger. Due to the lower concentration of grain boundary, the hardness is lower compared to that found in metallic molds, which has smaller grains and a higher hardness. Therefore, it can be concluded that the cooling rate and alloying elements affect the final microstructure of the workpiece

Utilização da função Desirability em um processo de fundição de aço ABNT 1030

This dissertation addresses the main theme the use of desirability tool in optimizing a process with multiple response variables. The current scenario of strong bids to conquer the consumer market makes it necessary to develop improvements for better process performance as a whole, is to cut costs, increase efficiency or effectiveness. Thus, the use of methods to assist in this process is becoming increasingly feasible. This study used the MINITAB program and the data of the doctoral thesis of Dr. Luiz Henrique Dias Alves, in order to compare the results obtained in both studies. As a result, after applying the desirability method, simulated to optimize two responses variables regarding the formation of voids related to solidification in ABNT 1030 steel casting process. Thus, it was possible to evaluate the behavior of the variables with the variation of parameters of the desirability function

Utilização da função Desirability em um processo de fundição de aço ABNT 1030

This dissertation addresses the main theme the use of desirability tool in optimizing a process with multiple response variables. The current scenario of strong bids to conquer the consumer market makes it necessary to develop improvements for better process performance as a whole, is to cut costs, increase efficiency or effectiveness. Thus, the use of methods to assist in this process is becoming increasingly feasible. This study used the MINITAB program and the data of the doctoral thesis of Dr. Luiz Henrique Dias Alves, in order to compare the results obtained in both studies. As a result, after applying the desirability method, simulated to optimize two responses variables regarding the formation of voids related to solidification in ABNT 1030 steel casting process. Thus, it was possible to evaluate the behavior of the variables with the variation of parameters of the desirability function