High temperature nanoindentation behavior of Al/SiC multilayers

Nanoscale Al/SiC composite laminates have unique properties, such as high strength, high toughness, and damage tolerance. In this article, the high-temperature nanoindentation response of Al/SiC nanolaminates is explored from room temperature up to 300_C. Selected nanoindentations were analyzed postmortem using focused ion beam and transmission electron microscopy to ascertain the microstructural changes and the deformation mechanisms operating at high temperature.

High temperature micropillar compression of Al/SiC nanolaminates

The effect of the temperature on the compressive stress–strain behavior of Al/SiC nanoscale multilayers was studied by means of micropillar compression tests at 23 °C and 100 °C. The multilayers (composed of alternating layers of 60 nm in thickness of nanocrystalline Al and amorphous SiC) showed a very large hardening rate at 23 °C, which led to a flow stress of 3.1 ± 0.2 GPa at 8% strain. However, the flow stress (and the hardening rate) was reduced by 50% at 100 °C. Plastic deformation of the Al layers was the dominant deformation mechanism at both temperatures, but the Al layers were extruded out of the micropillar at 100 °C, while Al plastic flow was constrained by the SiC elastic layers at 23 °C. Finite element simulations of the micropillar compression test indicated the role played by different factors (flow stress of Al, interface strength and friction coefficient) on the mechanical behavior and were able to rationalize the differences in the stress–strain curves between 23 °C and 100 °C.

Nuevas perspectivas sobre el arte de Al-Andalus bajo el dominio almorávide

Nuevas perspectivas sobre el arte de Al-Andalus bajo el dominio almorávide

Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates

Composite laminates on the nanoscale have shown superior hardness and toughness, but little is known about their high temperature behavior. The mechanical properties (elastic modulus and hardness) were measured as a function of temperature by means of nanoindentation in Al/SiC nanolaminates, a model metal–ceramic nanolaminate fabricated by physical vapor deposition. The influence of the Al and SiC volume fraction and layer thicknesses was determined between room temperature and 150 °C and, the deformation modes were analyzed by transmission electron microscopy, using a focused ion beam to prepare cross-sections through selected indents. It was found that ambient temperature deformation was controlled by the plastic flow of the Al layers, constrained by the SiC, and the elastic bending of the SiC layers. The reduction in hardness with temperature showed evidence of the development of interface-mediated deformation mechanisms, which led to a clear influence of layer thickness on the hardness.

Aplicación de nuevas tecnologías en la Arqueología de la Guerra Civil Española: Los Yesares, Pinto (Madrid. Application of new technologies in archeology of the Civil War:The Yesares, Pinto (Madrid.

ABSTRACT: The surveys carried out in the municipality of Pinto (Madrid) have enabled us to locate various structural remains linked to the military operations that took place around the capital during the Spanish Civil War (1936-1939). In order to identify and record them, surveys were complemented with the use of GPS and air photographs from different time periods. Afterwards, and in collaboration with researchers from various universities, further methods aimed at generating a complete special representation of the area were applied directly to one of the sites which produced the best results, known as "los Yesares". These methods include topographic mapping that resulted in cartographic material at different scales, the photographic recording with flying Unmanned Aerial Vehicles, and the use of land scanners and GPS-corrected photogrammetrics with which to obtain 3D models.

Técnicas y materiales de la construcción fortificada altomedieval en el centro de la Península Ibérica: métodos de análisis a través de la arqueología y la historia de la construcción

Esta tesis doctoral tiene como objeto el acercamiento histórico-constructivo a la realidad material de las fortificaciones edificadas en el centro de la Península Ibérica durante los primeros siglos de la Edad Media. El marco geográfico se extiende desde el cauce del río Duero, delimitado por los valles de sus afluentes, el Duratón, al oeste, y el Escalote al este, hasta las cumbres del Sistema Central oriental en su entronque con el Ibérico, para descender por la falda sur de la sierra hasta los valles altos del Lozoya, Jarama y Henares. Siguiendo las demarcaciones actuales, el marco de estudio ocupa parcialmente las provincias de Soria, Guadalajara, Madrid, Segovia, Burgos y Valladolid. Desde un punto de vista cronológico, el espacio temporal se inicia con la conquista musulmana de la Península Ibérica de 711 y culmina con la incorporación definitiva al reino de Castilla de las zonas estudiadas, en torno al año 1150. Se trata de un espacio de transición, tanto desde el punto de vista social como ecológico. Los territorios al sur de la sierra correspondían a los confines septentrionales de la Marca Media de al-Andalus, mientras que la falta norte, los extrema durii, fueron un territorio escasamente poblado y desorganizado, foco de la expansión de los reinos de León y Castilla y zona de conflicto con al-Andalus a principios del siglo X. Un territorio tan amplio y heterogéneo, unido a una compleja evolución histórica y social y la parquedad de las fuentes escritas, ha necesitado de un acercamiento con una metodología de tipo mixto, en la que han convergido las técnicas propias de la documentación histórica, de la arqueología y de la historia de la construcción. Esta metodología parte de un exhaustivo vaciado bibliográfico, tras lo cual se planteó una prospección arqueológica dirigida que permitió realizar un catálogo de elementos fortificados en el área de estudio susceptibles de contener fases altomedievales. Sobre cada uno de los elementos localizados se realizó una toma de datos de tipo gráfico métrico y constructivo. Cruzando los datos recabados en cada edificio con técnicas propias de la estratigrafía e historia de la construcción se identificaron y aislaron las fases de la cronología analizada. Entre las fortificaciones que evidenciaron fases altomedievales y atendiendo a su singularidad, representatividad y calidad estratigráfica se ha profundizado en el análisis de nueve casos de estudio: el conjunto fortificado de Atienza, el castillo de Cogolludo, el recinto amurallado de Buitrago de Lozoya, el castillo de Caracena, la iglesia parroquial de la Inmaculada Concepción de Mezquetillas, la alcazaba de Gormaz, la torre de San Andrés de Sepúlveda, la iglesia parroquial de San Miguel de Ayllón y la fortificación rupestre de Alcolea de las Peñas. La investigación ha servido para dos fines principales. El primero se centra en el aspecto material. En este sentido no solo se ha identificado la presencia o ausencia de fases altomedievales en cado uno de los edificio lo que ha permitido realizar una lectura territorial, la caracterización de las diferentes técnicas y materiales constructivos y valorar la posibilidad de establecer una cronotipología. El segundo se centra en aspectos históricos y sociales. La vinculación de estos restos materiales con la documentación histórica ha devenido en un medio para conocer la historia de las gentes que construyeron estos edificios, la motivación que les llevó a emprender tales proyectos, así como el contexto en el que cada una de estas fortificaciones desempeñó las funciones para las que fue creada. Este estudio ha puesto de manifiesto la ruptura que supuso la ocupación estatal de esta zona por parte del ejército cordobés desde mediados del siglo X, tanto desde el punto de vista social como constructivo. Se ha podido documentar materialmente esta ocupación tras la restauración de Medinaceli, en torno a 946, y la sucedida tras la toma de Sepúlveda por parte de Almanzor en 984, diferenciándose claramente las técnicas constructivas propias de este momento, ejecutadas directamente por talleres foráneos, procedentes de Córdoba y Toledo. La posición estratigráfica de estas fábricas diagnósticas ha permito identificar fases constructivas inmediatamente anteriores y posteriores a este momento. También se ha podido comprobar la hipótesis inicial en relación a la pérdida de conocimientos constructivos durante el final de la Antigüedad y los primeros siglos del medievo en la zona estudiada. La sillería y la explotación de canteras, así como el ciclo productivo del ladrillo por completo, son recuperados sin recurrir a un sustrato tecnológico local, propiciados de manera efímera por la ocupación califal. Cuando se produce el desmembramiento del califato a partir del año 1010 estas técnicas se vuelven a abandonar. A finales del siglo XI y principios del siglo XII se produce un nuevo cambio en la construcción, recuperándose de nuevo estas técnicas de la mano del románico y del establecimiento de la red parroquial diocesana. En una zona y periodo histórico apenas explotado por la investigación, esta tesis doctoral busca no solo establecer una metodología de trabajo sino sentar las bases para futuros estudios, tanto desde el punto de vista particular, profundizando en el estudio constructivo y estratigráfico de cada uno de los elementos recogidos, como en otros aspectos más trasversales. ABSTRACT This doctoral thesis has a constructive historical material approach to the reality of the fortifications built in the center of the Iberian Peninsula during the first centuries of the middle Ages. The geographical framework extends from the Duero´s riverbed, bounded by the valleys of its tributaries, the Duratón on the west, and the Escalote on the east, until to the peaks of the eastern Central System at its connection with the Iberian, to descend the hillside of the mountain range to the high valleys of Lozoya, Jarama and Henares. Following the current demarcations under this framework study, partially cover the provinces of Soria, Guadalajara, Madrid, Segovia, Burgos and Valladolid. From a chronological point of view, the temporal space began with the Muslim conquest of the Iberian Peninsula in 711 A.D and ends with the final incorporation into the Kingdom of Castile in the studied areas, around the year 1150 A.D. It is a transitional gathering point, both socially and ecologically. The southern territories of the Sierra or mountain range corresponded to the northern boundaries of the Middle mark of al- Andalus , while the northern missing, the extrema Durii , were a disorganized sparsely populated territory and point of the expansion of the kingdoms of Leon and Castile and zone of conflict with al- Andalus at the beginning of the tenth century. Such a wide and diverse territory, connected with a complex historical, social evolution and the lack of written sources , has required an approach with a mixed type methodology, which have converged the techniques of historical documentation of the archeology and building history. This methodology comes from a comprehensive bibliographic study, after which an archaeological survey was directed that allowed building a fortified elements ‘catalog in the study area likely to contain high medieval period phases were raised. On each of the elements located one metric data collection and constructive graphic type was performed. Checking against the data collected in each building with its own history of stratigraphy and construction techniques and finally, they were identified and isolated the timing analysis phases. Among the early medieval fortifications that showed high period Medieval phases and according to its uniqueness , representativeness and stratigraphy’s quality of the nine case studies : the fortified complex of Atienza, Cogolludo Castle, the Buitrago de Lozoya´s walled enclosure , the Caracena´s castle , the Mezquetillas´ parish church, the Gormaz´s fortress, the San Andres toser in Sepulveda, the church of San Miguel de Ayllón and the Alcolea de las Peñas´ rock fortress. This research study has served two main purposes. The first focuses on the material side. In this sense it does not only identified the presence or absence of early medieval period phases in each one of the building, which has allowed a territorial reading and the characterization of the different construction techniques and materials, but it also assess the possibility of establishing a chrono–typology. The second focuses on historical and social aspects. The bound of these materials remains with the historical documentation has become a means to know the history of the people who built these buildings, the motivation that led them to undertake such projects as well as the context in which each of these fortifications played the functions for which it was created. This study has revealed the breach that led to the state occupation of the Cordovan army in this area by since mid-tenth century, from the social point of view and also from the structural one. It has been materially document this occupation after the restoration of Medinaceli, around 946, and succeeded after taking Sepulveda by Almanzor in 984, clearly differentiating their own building techniques currently implemented directly by foreign workshops, from Cordova and Toledo. The stratigraphic position of these factories has made it possible to identify earlier and later construction phases at this time. It has also been able to verify the initial hypothesis in relation with constructive knowledge loss during late antiquity and early medieval centuries in the studied area. Also ashlar, masonries as well as the brick production is recovered without resorting to a local technological substrate, fleetingly brought about by the Caliphate occupation. When the dismemberment of the Caliphate is produced from the year 1010 these techniques were abandoned again. In the late eleventh and early twelfth century these techniques are recovered from Romanesque and a new change came, also from the establishment of the diocesan parish network. In one historical period that has been hardly exploited by research, this thesis seeks not only to establish a working methodology but lay the groundwork for future studies, both from the particular point of view, paying special attention in the constructive and stratigraphic studies of each of the evidence collected , and additionally in other more transversal aspects.

El proceso de islamización en el Sharq al-Andalus a través de los registros monetales

El texto aborda el proceso de islamización en el sureste de la Península Ibérica a través de la información proporcionada por los registros numismáticos, tratando cuestiones como los inicios de la fiscalidad islámica y los intentos de control del territorio por parte de la autoridad emiral, la pervivencia del numerario bajoimperial romano y los cambios que supone la implantación del califato.

Ciudades y conquista: el fin de las ciuitates visigodas y la génesis de las mudun islámicas del sureste de al-Andalus

El trabajo se inscribe en el marco del proyecto de investigación GV-2402/94, Organización del poblamiento del territorio en el área suroriental de la Península Ibérica, del Programa de Proyectos de Investigación y Desarrollo Tecnológico de la Generalitat Valenciana.