Efeito de fontes de óleos vegetais sobre o desempenho, características de carcaça e qualidade da carne de bovinos Nelore

A inclusão de óleos vegetais na dieta de bovinos tem sido utilizada para aumentar a densidade energética da dieta, melhorar a eficiência alimentar, além de produzir carnes com a composição de ácidos graxos mais favorável à saúde humana. Objetivou-se estudar os efeitos da inclusão de óleos de soja, girassol e linhaça na dieta de bovinos, sobre o desempenho, características quantitativas de carcaça e qualitativas da carne, perfil de ácidos graxos, oxidação lipídica e formação de compostos oxidados do colesterol. Foram confinados 96 bovinos Nelore, castrados, com aproximadamente 380 kg ± 34 kg de peso inicial e idade média de 20 meses. As dietas foram compostas de 79% de concentrado e 21% de volumoso (silagem de milho) e incluídos os óleos de soja, girassol e linhaça. Os animais foram pesados e avaliadas as características de carcaça por ultrassonografia nos dias 0, 28, 56 e 81 de confinamento. Nos dias zero e 81 dias de confinamento foi coletado sangue dos bovinos para avaliação do LDL-colesterol, HDL-colesterol, VLDL-colesterol e triacilgliceróis. Ao final de 81 dias de confinamento, os animais foram abatidos e foi avaliado o pH (uma e 48 horas após o abate) e foram retiradas amostras do músculo longissimus. Foi avaliado a cor, força de cisalhamento (FC) e perdas por cocção (PPC) em carnes não maturadas e maturadas por 14 dias. Duas amostras do longissimus foram expostas por um e três dias em condições semelhantes ao varejo. Nas carnes expostas por um dia foi avaliado a cor e o pH. Nas amostras expostas por três dias foi avaliado além da cor e pH, o perfil de ácidos graxos, TBARS, colesterol e a presença do 7-cetocolesterol. Foi realizada ainda a análise sensorial e determinado a quantidade de lipídios totais das carnes. A estabilidade oxidativa dos óleos utilizados na dieta também foi avaliada. O experimento foi conduzido em delineamento de blocos casualizados, sendo o peso inicial o bloco. O desempenho e as características de carcaça avaliadas por ultrassonografia não foram influenciadas pelas fontes de óleo. Os tratamentos não influenciaram o peso de abate, o peso de carcaça quente, o pH da carcaça uma hora e 48 horas após o abate, o rendimento de carcaça, a cor, as PPC e a FC. O pH foi maior nas carnes maturadas por 14 dias (P=0,01), em relação àquelas sem maturação. As PPC e a FC foram menores (P=0,01) nas carnes maturadas por 14 dias. O óleo de linhaça apresentou menor estabilidade oxidativa seguidos do óleo de girassol e soja. As fontes de óleo não afetaram a concentração dos lipídios do plasma sanguíneo, no entanto, os níveis de VLDL, LDL, HDL, colesterol e triacilgliceróis foram maiores (P<0,01) no final do experimento em relação ao início. Não houve interação entre a espessura de gordura subcutânea (EGS) avaliada no abate e as dietas e efeito das fontes de óleo sobre os valores de TBARS, lipídios e colesterol. Não foi encontrado o 7-cetocolesterol nas carnes. O pH das carnes expostas por um e três dias sob condições de varejo, não foram influenciadas pela dieta nem pela interação da dieta e dos dias de exposição. No entanto, foi observado o efeito de tempo (P<0,01), as carnes expostas por três dias tiveram valores de pH maiores que as carnes expostas por um dia. A cor L*, a* e b* das carnes expostas em gôndola, sob condições de varejo não foi influenciado pela dieta, pelos dias de exposição e nem pela interação dos dias de exposição e dietas. Os ácidos graxos C18:1 n-9, C20:3 n-6 e C20:5 n-3 apresentaram interação entre a EGS e a dieta (P<0,05). O C18:1 cis 6 apresentou maiores concentrações (P<0,05) nas carnes provenientes dos animais alimentados com óleo de linhaça e soja, em comparação com as carnes provenientes da dieta controle. O C18:3 n-3 apresentou maiores concentrações nas carnes de animais alimentados com linhaça (P<0,05), em comparação com os demais tratamentos. O aroma e a textura da carne avaliados em análise sensorial realizada com consumidores não foram alterados pelos tratamentos. A carne dos animais alimentados com óleo de girassol resultou em maiores notas para o sabor (P<0,01), em relação à carne proveniente de animais alimentados com óleo de soja. As dietas controle e girassol resultaram em carnes mais suculentas e com maior aceitabilidade global (P<0,01), em relação ao tratamento soja. Independentemente do tipo de óleo utilizado na dieta dos animais, não houve influência no desempenho e nas características da carcaça. O óleo de linhaça proporcionou carnes com perfil de ácidos graxos mais favorável para a saúde humana, pois apresentou maiores proporções do ácido linolênico e relações ideais de n6:n3 (4,15). O uso de óleos vegetais na dieta, não prejudicou a aparência das carnes e não proporcionaram oxidação lipídica com a formação de compostos de colesterol oxidados nas carnes expostas sob condições de varejo.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

Avaliação de impacto socioambiental da cadeia produtiva da soja - uma análise na região de Londrina/PR.

O trabalho relata a avaliação socioambiental na cadeia produtiva da soja para geração de biodiesel, na região de Londrina/PR. Foi realizado levantamento bibliográfico uma oficina de trabalho com a aplicação de uma ferramenta de avaliação de impacto socioambiental, o Eco-cert.Rural (Sistema Base de Eco-certificação de Atividades Rurais). A oficina ocorreu em 17 de abril de 2008, na Embrapa Soja, reunindo 17 atores sociais envolvidos com a cadeia produtiva da soja, na região de Londrina/PR. A avaliação explicitou as principais tendências de desempenho dos indicadores de impacto socioambiental, segundo o conhecimento e experiência dos atores sociais envolvidos na época da avaliação. Houve alteração no objeto de avaliação do trabalho de cadeia produtiva da soja para geração de biodiesel para cadeia de produção da soja com práticas intensivas de plantio direto. Isto porque, os especialistas foram unânimes em afirmar que o processo produtivo agrícola de soja, na região de Londrina/PR, não se alterou em função do uso desta matéria-prima na produção de biodiesel. Constatou-se inicialmente que na região de Londrina/PR a produção de soja em sistema de plantio direto intensivo traz efeitos negativos sobre o Desempenho Ecológico, que são comuns em atividades agrícolas devido à dependência da agricultura de fontes e meios de produção externos. Ainda assim, há efeito positivo para o critério Recuperação Ambiental, dentro desta dimensão. O Desempenho Socioambiental beneficiado por essa cadeia produtiva com impactos positivos para a maioria dos critérios indicadores, destacando-se a capacitação dos produtores, a geração e diversidade de fontes de renda e o valor das propriedades.

Análise comparativa entre simuladores de linha de fluxo e diferenças finitas para um reservatório de petróleo submetido a injeção de água

Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.

Estudo do processo de combustão in-situ em reservatórios maduros de óleos médios e leves (high pressure air injection)

Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves

Um modelo matemático baseado em wavelets para análise do método térmico de recuperação de óleo pesado aplicando irradiação eletromagnética

This work proposes a model to investigate the use of a cylindrical antenna used in the thermal method of recovering through electromagnetic radiation of high-viscosity oil. The antenna has a simple geometry, adapted dipole type, and it can be modelled by using Maxwell s equation. The wavelet transforms are used as basis functions and applied in conjunction with the method of moments to obtain the current distribution in the antenna. The electric field, power and temperature distribution are carefully calculated for the analysis of the antenna as electromagnetic heating. The energy performance is analyzed based on thermo-fluid dynamic simulations at field scale, and through the adaptation in the Steam Thermal and Advanced Processes Reservoir Simulator (STARS) by Computer Modelling Group (CMG). The model proposed and the numerical results obtained are stable and presented good agreement with the results reported in the specialized literature

Análise de viabilidade de injeção de fluidos alternativos ao vapor em reservatórios de óleo pesado

Many of hydrocarbon reserves existing in the world are formed by heavy oils (°API between 10 and 20). Moreover, several heavy oil fields are mature and, thus, offer great challenges for oil industry. Among the thermal methods used to recover these resources, steamflooding has been the main economically viable alternative. Latent heat carried by steam heats the reservoir, reducing oil viscosity and facilitating the production. This method has many variations and has been studied both theoretically and experimentally (in pilot projects and in full field applications). In order to increase oil recovery and reduce steam injection costs, the injection of alternative fluid has been used on three main ways: alternately, co-injected with steam and after steam injection interruption. The main objective of these injection systems is to reduce the amount of heat supplied to the reservoir, using cheaper fluids and maintaining the same oil production levels. This works discusses the use of carbon dioxide, nitrogen, methane and water as an alternative fluid to the steam. The analyzed parameters were oil recoveries and net cumulative oil productions. The reservoir simulation model corresponds to an oil reservoir of 100 m x 100 m x 28 m size, on a Cartesian coordinates system (x, y and z directions). It is a semi synthetic model with some reservoir data similar to those found in Brazilian Potiguar Basin. All studied cases were done using the simulator STARS from CMG (Computer Modelling Group, version 2009.10). It was found that waterflood after steam injection interruption achieved the highest net cumulative oil compared to other fluids injection. Moreover, it was observed that steam and alternative fluids, co-injected and alternately, did not present increase on profitability project compared with steamflooding

Análise paramétrica da injeção de vapor e solvente em reservatórios de óleo pesado

A significant fraction of the hydrocarbon reserves in the world is formed by heavy oils. From the thermal methods used to recovery these resources, Steamflooding has been one of the main economically viable alternatives. In Brazil, this technology is widely used by Petrobras in Northeast fields. Latent heat carried by steam heats the oil in the reservoir, reducing its viscosity and facilitating the production. In the last years, an alternative more and more used by the oil industry to increase the efficiency of this mechanism has been the addition of solvents. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a low viscosity zone between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method and investigate its applicability in reservoirs with properties similar to those found in Potiguar Basin, a numerical study was done to analyze the influence of some operational parameters (steam injection rate, injected solvent volume and solvent type) on oil recovery. Simulations were performed in STARS ("Steam, Thermal, and Advanced Processes Reservoir Simulator"), a CMG ("Computer Modelling Group") program, version 2009.10. It was found that solvents addition to the injected steam not only anticipated the heated oil bank arrival to the producer well, but also increased the oil recovery. Lower cold water equivalent volumes were required to achieve the same oil recoveries from the models that injected only steam. Furthermore, much of the injected solvent was produced with the oil from the reservoir

Desenvolvimento de metodologias analíticas alternativas por cromatografia gasosa para análise de biodiesel

Since the beginning of the National Program for Production and Use of Biodiesel in Brazil, in 2004, different raw materials were evaluated for biodiesel production, trying to combine the agricultural diversity of the country to the desire to reduce production coasts. To determine the chemical composition of biodiesel produced from common vegetables oils, international methods have been used widely in Brazil. However, for analyzing biodiesel samples produced from some alternative raw materials analytical problems have been detected. That was the case of biodiesel from castor oil. Due the need to overcome these problems, new methodologies were developed using different chromatographic columns, standards and quantitative methods. The priority was simplifying the equipment configuration, realizing faster analyses, reducing the costs and facilitating the routine of biodiesel research and production laboratories. For quantifying free glycerin, the ethylene glycol was used in instead of 1,2,4-butanetriol, without loss of quality results. The ethylene glycol is a cheaper and easier standard. For methanol analyses the headspace was not used and the cost of the equipment used was lower. A detailed determination of the esters helped the deeper knowledge of the biodiesel composition. The report of the experiments and conclusions of the research that resulted in the development of alternative methods for quality control of the composition of the biodiesel produced in Brazil, a country with considerable variability of species in agriculture, are the goals of this thesis and are reported in the following pages

Desempenho de genótipos de girassol em Jaguariúna - SP - Análise preliminar.

A cultura do girassol vem se destacando no Brasil e um dos principais motivos para este crescimento é seu uso como matéria-prima no Programa Nacional de Produção e uso do Biodiesel. O objetivo deste trabalho foi avaliar o desempenho produtivo de 12 genótipos de girassol (HLS 01; HLE 11; HELIO 358; EMBRAPA 122; BRSGIRA 01; BRSGIRA 09; SRM 822; TRITON MAX; ZENIT; AGROBEL 960; MG 52 e M 734) na região de Jaguariúna-SP. Os materiais foram avaliados através das seguintes características agronômicas: produtividade (kg.ha-1), produção por capítulo (g), diâmetro do capítulo (m), altura da planta (m) e altura do capítulo (m). Os genótipos apresentaram altos rendimentos (média de 2869 kg ha-1), sem diferirem estatisticamente entre si; o que nos leva a concluir que na região de Jaguariúna - SP há grande potencial de cultivo do girassol, sendo inclusive, uma possível opção para o plantio em sucessão à cana de açúcar.

Aplicação do escore MELD em pacientes submetidos a transplante de fígado: análise retrospectiva da sobrevida e dos fatores preditivos a curto e longo prazo

BACKGROUND: The model for end-stage liver disease (MELD) was developed to predict short-term mortality in patients with cirrhosis. There are few reports studying the correlation between MELD and long-term posttransplantation survival. AIM: To assess the value of pretransplant MELD in the prediction of posttransplant survival. METHODS: The adult patients (age >18 years) who underwent liver transplantation were examined in a retrospective longitudinal cohort of patients, through the prospective data base. We excluded acute liver failure, retransplantation and reduced or split-livers. The liver donors were evaluated according to: age, sex, weight, creatinine, bilirubin, sodium, aspartate aminotransferase, personal antecedents, brain death cause, steatosis, expanded criteria donor number and index donor risk. The recipients' data were: sex, age, weight, chronic hepatic disease, Child-Turcotte-Pugh points, pretransplant and initial MELD score, pretransplant creatinine clearance, sodium, cold and warm ischemia times, hospital length of stay, blood requirements, and alanine aminotransferase (ALT >1,000 UI/L = liver dysfunction). The Kaplan-Meier method with the log-rank test was used for the univariable analyses of posttransplant patient survival. For the multivariable analyses the Cox proportional hazard regression method with the stepwise procedure was used with stratifying sodium and MELD as variables. ROC curve was used to define area under the curve for MELD and Child-Turcotte-Pugh. RESULTS: A total of 232 patients with 10 years follow up were available. The MELD cutoff was 20 and Child-Turcotte-Pugh cutoff was 11.5. For MELD score > 20, the risk factors for death were: red cell requirements, liver dysfunction and donor's sodium. For the patients with hyponatremia the risk factors were: negative delta-MELD score, red cell requirements, liver dysfunction and donor's sodium. The regression univariated analyses came up with the following risk factors for death: score MELD > 25, blood requirements, recipient creatinine clearance pretransplant and age donor >50. After stepwise analyses, only red cell requirement was predictive. Patients with MELD score < 25 had a 68.86%, 50,44% and 41,50% chance for 1, 5 and 10-year survival and > 25 were 39.13%, 29.81% and 22.36% respectively. Patients without hyponatremia were 65.16%, 50.28% and 41,98% and with hyponatremia 44.44%, 34.28% and 28.57% respectively. Patients with IDR > 1.7 showed 53.7%, 27.71% and 13.85% and index donor risk <1.7 was 63.62%, 51.4% and 44.08%, respectively. Age donor > 50 years showed 38.4%, 26.21% and 13.1% and age donor <50 years showed 65.58%, 26.21% and 13.1%. Association with delta-MELD score did not show any significant difference. Expanded criteria donors were associated with primary non-function and severe liver dysfunction. Predictive factors for death were blood requirements, hyponatremia, liver dysfunction and donor's sodium. CONCLUSION: In conclusion MELD over 25, recipient's hyponatremia, blood requirements, donor's sodium were associated with poor survival.

Titulação potenciométrica aplicada na determinação de ácidos graxos livres de óleos e gorduras comestíveis

Free fatty acids are a measure of evaluating fats and oils, submitted to abusive conditions, besides being a quality characteristic of edible vegetable oils. The official method of determination (AOCS Ca 5a-40, 2004) is based on titration, using phenolphthalein as an indicator. For crude and degummed oils, the titration end point is difficult to be observed due to the high level of pigments, resulting in dark solutions. In this case and others, such as self-life studies, in which sample quantities are limited, potentiometric titration may be a very good alternative.

Conseqüências da análise incorreta de experimentos blocados

Errors are always present in experimental measurements so, it is important to identify them and understand how they affect the results of experiments. Statistics suggest that the execution of experiments should follow random order, but unfortunately the complete randomization of experiments is not always viable for practical reasons. One possible simplification is blocked experiments within which the levels of certain factors are maintained fixed while the levels of others are randomized. However this has a cost. Although the experimental part is simplified, the statistical analysis becomes more complex.

O estado da arte da cromatografia associada à espectrometria de massas acoplada à espectrometria de massas na análise de compostos tóxicos em alimentos

Chromatography combined with several different detection systems is one of the more used and better performing analytical tools. Chromatography with tandem mass spectrometric detection gives highly selective and sensitive analyses and permits obtaining structural information about the analites and about their molar masses. Due to these characteristics, this analytical technique is very efficient when used to detect substances at trace levels in complex matrices. In this paper we review instrumental and technical aspects of chromatography-tandem mass spectrometry and the state of the art of the technique as it is applied to analysis of toxic substances in food.