Influence of type and amount of straw cover on weed emergence

This research was undertaken during 2003-2004 growing season to evaluate the effects of type [forage sorghum hybrid Cober Exp (Sorghum bicolor x Sorghum sudanense), forage millet (Pennisetum americanum var. BN2), finger millet (Eleusine coracana), and St Lucia grass (Brachiaria brizantha)] and amount of straw cover (5.5 and 3.0 t ha(-1)) upon the emergence of Bidens pilosa, Chamaesyce spp., Amaranthus spp., and Commelina benghalensis, under field conditions of the Brazilian Cerrado, in the region of Uberlandia-MG. The control consisted additional treatment lacking the straw cover. Emergence of weed depended on the type and amount of straw cover, as well as the weed species. The lowest number of B. pilosa seedlings was found in the presence of forage sorghum straw; Chamaesyce spp. in the lack of straw; Amaranthus spp. in the presence of higher amount of forage sorghum and forage millet, and lower amounts of forage millet and Finger Millet. All the types and amounts of straw reduced the emergency of C. benghalensis, except at the lowest level of St Lucia grass and the lack of straw.

Control of Brachiaria decumbens and Panicum maximum by S-metolachlor as influenced by the occurrence of rain and amount of sugarcane straw on the soil

Com o objetivo de estudar o controle em pré-emergência de Brachiaria decumbens e Panicum maximum pelo herbicida S-metolachlor em função do intervalo de tempo entre a aplicação e a ocorrência de chuva e da quantidade de palha de cana-de-açúcar na superfície do solo, dois experimentos foram desenvolvidos em vasos mantidos em casa de vegetação. No primeiro, foram estudadas cinco quantidades de palha sobre o solo (0, 3, 6, 10 e 15 t ha-1) e cinco dosagens de S-metolachlor (0; 0,96; 1,44; 1,92 e 2,40 kg ha-1). No outro, foram avaliadas duas quantidades de palha sobre o solo (0 e 10 t ha-1) e sete intervalos de tempo entre a aplicação de S-metolachlor e a simulação de chuva (1 dia antes; logo após; 4, 8, 12, 16 e 20 dias após a aplicação). As dosagens de S-metolachlor não foram afetadas pelos níveis de palha na superfície do solo. Além disso, sem a manutenção de palha sobre o solo, o controle das plantas daninhas pelo herbicida S-metolachlor não foi influenciado pelos intervalos de tempo entre a aplicação e a simulação de chuva, até 20 dias. Com 10 t ha-1 de palha, o controle de B. decumbens e P. maximum pelo S-metolachlor não foi prejudicado quando choveu até 12 dias da sua aplicação ou um dia antes, mas, nesse caso apenas para P. maximum.

Biomass consumption and CO2, CO and main hydrocarbon gas emissions in an Amazonian forest clearing fire

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Regeneration of class III furcation defects with basic fibroblast growth factor (b-FGF) associated with GTR. A descriptive and histometric study in dogs

Background: the poor predictability of periodontal regenerative treatment of Class III furcation defects stimulates the study of alternatives to improve its results, such as the use of polypeptide growth factors. The objective of this study was to evaluate, both histologically and histometrically, the effects of topical application of basic fibroblast growth factor (b-FGF) associated with guided tissue regeneration (GTR) in the treatment of Class III defects surgically induced in dogs.Methods: All second and fourth premolars of 5 mongrel dogs were used and randomly assigned to one of three treatment groups: group 1 (control), treated with scaling and root planing, tetracycline hydrochloride (125 mg/ml) conditioning, and GTR with a collagen membrane; group 2, same treatment as group 1 plus 0.5 mg of b-FGF; group 3, same treatment as group 1 plus 1.0 mg of b-FGF. After a 90-day healing period, routine histologic processing and staining with hematoxylin and eosin and Masson trichrome were performed.Results: the descriptive analysis indicated better regenerative results in both groups treated with b-FGF while the histometric data, analyzed by means of analysis of variance (ANOVA), showed greater filling of the defects in group 2 in comparison to the defects in groups 3 and 1, respectively, which was represented by a smaller area of plaque-occupied space (P = 0.004) as well as a greater amount of newly formed cementum (P = 0.002).Conclusions: These results indicate that b-FGF, especially in smaller doses, may enhance the regenerative results in Class III furcation lesions, leading to greater filling of these defects with both mineralized and non-mineralized tissues.

Characterization of native and oxidized starches of two varieties of Peruvian carrot (Arracacia xanthorrhiza, B.) from two production areas of Paraná state, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of TiO2 surface modification in Rhodamine B photodegradation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Curvature versus V-bends in a group B titanium T-loop spring

Objective: To compare the system of forces acting on curvature and preactivated V-bends in titanium T-loop springs (TTLSs) made of 0.017- X 0.025-inch TMA (titanium molibdenium alloy) wire.Materials and Methods: Pictures of TTLSs preactivated by curvature and V-bends were inserted in the LOOP software program to design both TTLSs. Symmetry was assured using the program. Both TTLSs used the same amount (length) of wire and had the same angulation between their anterior and posterior extremities when passive. The loops were activated 7 mm, and forces and moments were registered after each 0.5 mm of deactivation. The brackets were at the same height, separated by 23 mm and angulated 0 degrees.Results: The preactivated curvature TTLS delivered horizontal forces ranging from 34 gF to 456 gF, while the TTLS preactivated by V-bends delivered forces ranging from 54 gF to 517 gF. The forces decreased more (30 gF vs 33 gF) with every 0.5 mm of activation on the preactivated V-bend TTLS than on the preactivated curvature TTLS. Vertical forces were low and clinically insignificant for both TTLSs. The moment to force (MF) ratios were systematically higher on the preactivated curvature than on the preactivated V-bend TTLS (from 5.8 mm to 38.8 mm vs 4.7 mm to 28.3 mm).Conclusions: Although both loops show symmetrical moments in their anterior and posterior extremities and can be used for group B anchorage, the curvature preactivated TTLS delivers lower horizontal forces and higher MF ratios than the acute preactivated V-bend TTLS.

Hepatic gluconeogenesis in rats trained to eat a single meal daily. Role of eating periodicity and the amount of food ingested in the last meal

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Yield and phytochemical characterization of essential oil from Ocimum selloi B. obtained by hydrodistillation and supercritical fluid extraction

The yield and chemical composition of essential oils from leaves of Ocimum selloi B. submitted to organic and mineral fertilization, obtained by hydrodistillation and supercritical fluid extraction (SFE) were compared. Essential oil was extracted in a Clevenger-type apparatus for 2 h 30 min and analyzed by GC-MS (Shimadzu, QP 5050-DB-5 capillary column - 30 m × 0.25 mm × 0.25 μm). Carrier gas was helium (1.7 ml/min); split ratio: 1:30. Temperature program: 50°C, rising to 180°C at 5°C/min, 180°C, rising to 280°C at 10°C/min. Injector temperature: 240°C and detector temperature: 230°C. Identifications of chemical compounds were made by matching their mass spectra and Kovat's indices (IK) values with known compounds reported in the literature. An Applied Separations-apparatus (Speed SFE, model 7071, Allentown, PA, EUA) was used for SFE extractions. They were conducted at pressure 200 bar and temperature 30°C (20 min in static mode and 40 min in dynamic mode). The supercritical CO2 flow rate was (6.8±0.7)×10-5 kg-CO2/s. The essential oil collected was immersed in ethylene glycol bath (5°C). The yield of essential oils obtained by SFE was larger than hydrodistillation in both fertilization treatments (279 and 333% for organic and mineral fertilizations, respectively). There were no differences between the fertilization treatments. The amount of the volatile components showed by GC-MS chromatogram was highest in the essential oil obtained by hydrodistillation than SFE. The main volatile constituents of the essential oils were trans-anethole (Hydrodistillation: organic - 52.4%; mineral - 55.0%/ SFE: Hydrodistillation - 62.8%; mineral - 66.8%) and methyl-chavicol (Hydrodistillation: organic - 37.3%; mineral - 38.3%/ SFE: organic - 8.4%; mineral - 4.3%). A reduction of methyl-chavicol relative proportion of essential oil obtained by SFE was observed. Cys-anethole, α-copaene, trans-cariofilene, germacrene-D, β-selinene, biciclogermacrene and spathulenol were expressed only in hydrodistillation. The extraction of essential oil by SFE presented larger yield of essential oil than hydrodistillation technique, presenting, however, these essential oils, different phytochemical profiles.

Effect of molybdenum on the formation of Ti6Si2B in mechanically alloyed Ti-Mo-Si-B powders

This paper discusses on effect of molybdenum on the Ti6Si2B formation in mechanically alloyed and hot-pressed Ti-xMo-22Si-11B (x= 2, 5, 7 and 10 at%) alloys. High-energy ball milling and hot pressing were utilized to produce homogeneous and dense materials, which were characterized by scanning electron microscopy, X-ray diffraction, electron dispersive spectrometry, and Vickers hardness. The excessive agglomeration during milling was more pronounced in Moricher powders, which was minimized with the formation of brittle phases. Hot pressing of mechanically alloyed Ti-xMo-22Si-11B powders produced dense samples containing lower pore amounts than 1%. Ti6Si2B was formed in microstructure of the hot-pressed Ti-2Mo-22Si-11B alloy only. In Mo-richer quaternary alloys, the Ti3Si and Ti5Si3 phases were preferentially formed during hot pressing. Oppositely to the ternary phase, the Ti3Si phase dissolved a significant Mo amount. Vickers hardness values were reduced in hot-pressed Ti-xMo-22Si-11B alloys containing larger Mo amounts, which were dissolved preferentially in Ti solid solution. © (2012) Trans Tech Publications, Switzerland.

Avaliação da prevalência de imunização contra a hepatite B nos profissionais da secretaria de saúde de Maringá

Pós-graduação em Pesquisa e Desenvolvimento (Biotecnologia Médica) - FMB

Effect of adjuvants on the amount of air included in droplets generated by spray nozzles

The air included in droplets generated by spray nozzles directly int0erferes in transport, deposition and retention of the droplets after its impact on the target. The objective of this study was to analyze the interference of adjuvants in the amount of air included in droplets generated by spray nozzles. The treatments were composed by four spray solutions containing mineral oil, vegetable oil, surfactant and water, and three spray nozzles, two air induction type and one pre-orifice. The air included was calculated by the difference between the volume of spray mix (air plus liquid) and only the liquid, which was made by means of sprayed samples captured in a funnel and collected in a graduated cylinder. The surface tension was estimated by the gravimetric method using a precision scale and a graduated pipette. The surfactant provided the largest percentage of air included in the spray. For the surface tension, the mineral oil and the surfactant had the lowest values. It was concluded that the use of adjuvants had a direct influence on the percentage of air included. In addition, products with greater ability to reduce surface tension and to form homogeneous solutions provided the increase in the percentage of air included in the droplet.

Why have land use change models for the Amazon failed to capture the amount of deforestation over the last decade?

Land cover change in the Neotropics represents one of the major drivers of global environmental change. Several models have been proposed to explore future trajectories of land use and cover change, particularly in the Amazon. Despite the remarkable development of these tools, model results are still surrounded by uncertainties. None of the model projections available in the literature plausibly captured the overall trajectory of land use and cover change that has been observed in the Amazon over the last decade. In this context, this study aims to review and analyze the general structure of the land use models that have most recently been used to explore land use change in the Amazon, seeking to investigate methodological factors that could explain the divergence between the observed and projected rates, paying special attention to the land demand calculations. Based on this review, the primary limitations inherent to this type of model and the extent to which these limitations can affect the consistency of the projections will also be analyzed. Finally, we discuss potential drivers that could have influenced the recent dynamic of the land use system in the Amazon and produced the unforeseen land cover change trajectory observed in this period. In a complementary way, the primary challenges of the new generation of land use models for the Amazon are synthesized. (c) 2014 Elsevier Ltd. All rights reserved.

Caracterização de resistência de genótipos de soja a Bemisia tabaci biótipo B (hemiptera: aleyrodidae)

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Aplicação clínica da mola T do grupo B para retração dos dentes anteriores

A TAS (Técnica do Arco Segmentado) representa uma alternativa à mecânica de deslizamento, muitas vezes dificultada pela incerteza da quantidade de força de atrito envolvida em cada sistema de forças utilizado. Nesse contexto, sabe-se que poucos cursos de Ortodontia no Brasil têm ensinado efetivamente a filosofia e o modo de trabalhar com a TAS. Portanto, este trabalho procura elucidar a forma de raciocínio das relaçÕes entre força e momento manipuladas na TAS, bem como mostrar a forma de confecção e utilização de mola "T" do grupo B, onde objetiva-se a movimentação recíproca dos segmentos posterior e anterior e, por fim, apresentar um caso clínico tratado com esse tipo de mecânica.