Design and fabrication of microcavity-array superhydrophobic surfaces

We have modeled, fabricated, and characterized superhydrophobic surfaces with a morphology formed of periodic microstructures which are cavities. This surface morphology is the inverse of that generally reported in the literature when the surface is formed of pillars or protrusions, and has the advantage that when immersed in water the confined air inside the cavities tends to expel the invading water. This differs from the case of a surface morphology formed of pillars or protrusions, for which water can penetrate irreversibly among the microstructures, necessitating complete drying of the surface in order to again recover its superhydrophobic character. We have developed a theoretical model that allows calculation of the microcavity dimensions needed to obtain superhydrophobic surfaces composed of patterns of such microcavities, and that provides estimates of the advancing and receding contact angle as a function of microcavity parameters. The model predicts that the cavity aspect ratio (depth-to-diameter ratio) can be much less than unity, indicating that the microcavities do not need to be deep in order to obtain a surface with enhanced superhydrophobic character. Specific microcavity patterns have been fabricated in polydimethylsiloxane and characterized by scanning electron microscopy, atomic force microscopy, and contact angle measurements. The measured advancing and receding contact angles are in good agreement with the predictions of the model. (C) 2010 American Institute of Physics. [doi:10.1063/1.3466979]

Density, size and distribution of stomata in 35 rainforest tree species in Central Amazonia

Stomata are turgor-operated valves that control water loss and CO2 uptake during photosynthesis, and thereby water relation and plant biomass accumulation is closely related to stomatal functioning. The aims of this work were to document how stomata are distributed on the leaf surface and to determine if there is any significant variation in stomatal characteristics among Amazonian tree species, and finally to study the relationship between stomatal density (S D) and tree height. Thirty five trees (>17 m tall) of different species were selected. Stomatal type, density (S D), size (S S) and stomatal distribution on the leaf surface were determined using nail polish imprints taken from both leaf surfaces. Irrespective of tree species, stomata were located only on the abaxial surface (hypostomaty), with large variation in both S D and S S among species. S D ranged from 110 mm-2 in Neea altissima to 846 mm-2 in Qualea acuminata. However, in most species S D ranges between 271 and 543 mm-2, with a negative relationship between S D and S S. We also found a positive relationship between S D and tree height (r² = 0.14, p < 0.01), but no correlation was found between S D and leaf thickness. The most common stomatal type was anomocytic (37%), followed by paracytic (26%) and anisocytic (11%). We conclude that in Amazonian tree species, stomatal distribution on the leaf surface is a response most likely dependent on the genetic background of every species, rather than a reaction to environmental changes, and that somehow S D is influenced by environmental factors dependent on tree height.

Early detection of injuries in leaves of Clusia hilariana Schltdl. (Clusiaceae) caused by particulate deposition of iron

This study aims to evaluate the prognostic value of microscopic parameters of asymptomatic leaves of Clusia hilariana Schltdl. subjected to particulate deposition of iron (2.14 mg cm-2 day-1) for 45 consecutive days. Samples of young and expanded leaves without symptoms were collected and subjected to light and scanning electron microscopy techniques. The height of the epidermal cells on both surfaces of the leaf and the thickness of the hypodermis, the chlorophyll parenchyma, and the leaf blade were measured. Micromorphological injury occurred in the abaxial surface of young leaves and on both surfaces of expanded leaves. Erosion of the epicuticular wax and cuticle rupture were frequent on the adaxial surface, while on the abaxial surface of both leaves there was a loss of sinuosity on the anticlinal wall of the epidermal cells, stomatal deformity and obstruction. Micromorphometric alterations were seen in all leaf tissues except in the height of epidermic cells, probably due to the thick cuticle and prominent cuticular flanges. The highest difference in thickness of the leaf blade was seen in young leaves of plants subjected to SPMFe, indicating greater sensibility to particulate iron in comparison to the expanded leaves. The micromorphological and micromorphometric alterations in the leaf blade of Clusia hilariana Schltdl. showed the prognostic potential of these tools on the evaluation of impacts caused by the deposition of particulate matter, especially in the 'Restinga' natural vegetation, where the exposure is increasing due to the presence of iron ore industry in their surroundings.

Physical characteristics of oily spraying liquids and droplets formed on coffee leaves and glass surfaces

The physical characteristics of a spray liquid are important in getting a good droplet formation and control efficiency over a particular target. As a function of these characteristics, it is possible to decipher which is the best adjuvant based on the respective concentration used during the spray. Therefore, ten spraying liquids were prepared, which varied in concentrations of pesticide lufenuron + profenofos, mineral oil, water and manganese sulfate. Pendant droplets formed from these mixtures were measured to examine their impact on surface tension. Droplets were applied to the surface of coffee leaves and the surface tension, contact angle formed and the leaf area wetted by the droplet, were measured. A smooth glass surface was taken as a comparative to the coffee leaves. The highest concentrations of oil resulted in lower surface tension, smaller contact angles of droplets on leaf surfaces and larger areas wetted by the droplets. Both surfaces showed hydrophilic behavior.

Relationships between crown architecture and available irradiance in two cerrado species with different leaf phenologies

Structural differences between cerrado species with different leaf phenologies are linked to crown architecture, leaf production, and biomass allocation to shoots and leaves. The present study characterized crown structures and the patterns of biomass allocation to leaves and shoots in two woody cerrado species with contrasting leaf phenologies and quantified the irradiance reaching their leaves to determine the best period during the day for photosynthetic activity. The shoots and leaves of five individuals of both Annona coriacea (deciduous) and Hymenaea stigonocarpa (evergreen) were collected along a 50 m transect in a cerrado fragment within the urban perimeter of Catalão - GO, to determine their patterns of biomass allocation in their crowns. The evergreen H. stigonocarpa had significantly higher mean values of shoot inclination (SI), petiole length (PL), leaf area (LA), leaf display index (LDI), and individual leaf area per shoot (ILA), while the deciduous species A. coriacea had significantly higher leaf numbers (LN). The more complex crown of H. stigonocarpa had shoots in more erect positions (orthotropic), with intense self-shading within shoots; A. coriacea, on the other hand, had slanting (plagiotropic) shoots in the crown, allowing similar irradiance levels to all leaf surfaces. The production of plagiotropic shoots by the deciduous species (A. coriacea) is a strategy that enables its use of incident sunlight early in the morning and preventing excessive water loss or excessive irradiance. Hymenaea stigonocarpa (an evergreen), by contrast, had orthotropic shoots and uses intense self-shading as a strategy to avoid excessive irradiance, especially at midday. Differences in crown architectures between evergreen and deciduous species of cerrado sensu stricto can therefore be viewed as adaptations to the environmental light regime.

Comparative leaf anatomy and morphology of some neotropical Rutaceae: Pilocarpus Vahl and related genera

Previous anatomical studies have been restricted to the foliar aspects of Pilocarpus. However, no anatomical studies analyzing the foliar aspects of Pilocarpus in relation to related genera have been carried out. Therefore, the aim of this study was to identify characters for future taxonomic and phylogenetic studies in Rutaceae, particularly in Pilocarpus, and to discuss the characteristics associated with the simple or compound leaf condition for the group. The petiole and the leaf blade of 14 neotropical Rutaceae species were analyzed, and the following characteristics were observed in all leaves studied: stomata on both surfaces; secretory cavities, including mesophyll type; camptodromous-brochidodromous venation pattern; and free vascular cylinder in the basal region of the petiole. Additional promising characters were identified for future taxonomic and phylogenetic studies in the Rutaceae family, especially for the Pilocarpus genera.

Características da anatomia foliar de espécies de braquiária e sua relação com a sensibilidade a herbicidas

O objetivo deste trabalho foi relacionar as características da anatomia foliar de Brachiaria decumbens (capim-braquiária) e Brachiaria plantaginea (capim-marmelada), em três estádios de desenvolvimento da planta, com a sensibilidade a herbicidas. A semeadura foi feita em vasos plásticos, contendo solo, mantidos em casa de vegetação. Foi amostrada a porção mediana do limbo da terceira folha expandida, a partir da base do colmo, compreendendo três estádios de desenvolvimento da planta: estádio 1 (com 4-6 folhas), estádio 2 (com 3-4 perfilhos) e estádio 3 (plantas adultas no início do florescimento). Foram quantificados os seguintes descritores anatômicos das regiões da quilha (nervura central) e da asa (porção entre a nervura central e a margem do limbo): área da secção transversal; porcentagens de epiderme das faces adaxial e abaxial, esclerênquima, bainha do feixe vascular, feixe vascular e parênquima; espessura da folha; distância entre os feixes vasculares; comprimento do estômato; e número de estômatos e de tricomas (curtos e longos). Os valores obtidos foram submetidos aos testes estatísticos multivariados de Análise de Agrupamento e Análise dos Componentes Principais. Os descritores avaliados permitiram diferenciar o estádio 3 de desenvolvimento da planta em relação aos demais, o qual pode ser considerado o menos sensível à ação dos herbicidas aplicados em pós-emergência.

Assessing the role of vertical leaves within the photosynthetic function of Styrax camporum under drought conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Leaf Structure and Taxonomy of Petunia and Calibrachoa (Solanaceae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Condutância estomática em folhas de feijoeiro submetido a diferentes regimes de irrigação

O controle estomático é importante propriedade fisiológica por meio da qual as plantas limitam a perda de água, ocasionando reduções na condutância estomática e, geralmente, reduzindo as trocas gasosas como forma de resposta das plantas a diversos fatores, incluindo o estresse hídrico. O objetivo deste trabalho foi determinar a condutância estomática em folhas de feijoeiro submetido a diferentes regimes de irrigação. O experimento foi conduzido no Departamento de Engenharia Rural da Faculdade de Ciências Agrárias e Veterinárias de Jaboticabal - SP. As irrigações nos tratamentos foram determinadas em função do esgotamento de água no solo: T1 - irrigado quando esse atingiu 40% da capacidade de água disponível (CAD); T2 - quando atingiu 60% da CAD; T3 - quando atingiu 80% da CAD, e T4 - não irrigado (irrigado somente para favorecer a emergência das plântulas). As medições de condutância estomática foram realizadas diariamente no campo, nas duas faces da folha, utilizando-se de um porômetro. em todos os tratamentos, em diversas medições, foi observada redução da condutância estomática em resposta a baixos valores de potencial mátrico e a altos valores de déficit de pressão de vapor e vice-versa. As folhas das plantas do tratamento T4, que foram submetidas a menor disponibilidade hídrica no solo, apresentaram os menores valores de condutância estomática durante os estádios do florescimento e enchimento de grãos.

Relação entre tricomas foliares de genótipos de feijoeiro comum, Phaseolus vulgaris L. e resistência a Diabrotica speciosa Germar, 1824 (Coleoptera: Chrysomelidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Measuring and analyzing color and texture information in anatomical leaf cross sections: An approach using computer vision to aid plant species identification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características anatômicas foliares e controle químico em pós-emergência de Brachiaria decumbens e Brachiaria plantaginea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Respostas de trocas gasosas e fluorescência da clorofila A em folhas verticais de Styrax camporum Pohl. (Styracaceae) submetida à deficiência hídrica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Leaf anatomical traits corroborate the leaf economic spectrum: a case study with deciduous forest tree species

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)